Where can I file bug reports?

Hi all,
Just got back from Day 3 of the Toronto Code Manuvers (Kick ass show). I've been playing with Creator 2 early access and have found many bugs that I want to check on/report on. Can someone please tell me where I can get/set bugs?
Cheers

Hi,
Thanks for the reply (Just got back from Day 4 in Toronto - Solaris day!) I went to the portal but I do not have a login and cannot see where/how I can get one?
Any ideas?
Thanks

Similar Messages

  • Where can we submit bug reports?

    I'm unable to submit a bug report re: Lightroom's export resizing, because following the trail at feedback.photoshop.com leads you to sign in with your Adobe ID before you can submit the report but when I sign in, the page just says photoshop.com accounts can no longer be created. So, that website failure aside, the text of bug report I was trying to submit:
    Lightroom 5's export isn't resizing exactly to specified long edge. For example, when I restrict long edge to 1920, the exported files are 1919. Same with 1024, I get 1023px files instead. If I export from Adobe Bridge, then the long edges are calculated correctly. This problem didn't happen with LR4. Files being exported were DNG and TIF.

    Thanks Rob. I tried with both FF and Chrome, and didn't have cookies blocked, still no joy on that front. I already have an Adobe ID (signed in at adobe.com and in creative cloud) but I'll try again at the photoshop.com forums in a few days.
    Didn't think about the original dimensions thing.. perhaps that might be it:
    If I create a 4000px wide tif in photoshop, import it to LR5, then export to 1920 it outputs a 1920px file. If the source file is a DNG (or TIF after editing in PS) from my D800 (7360 x 4912 uncropped), then LR5 on export outputs a 1919px file instead of 1920. I also created a new file in PS with 7360x4912 dimensions, and after importing that into LR5, I get the same off-by-1 export resizing.
    Doesn't seem to matter if the image is cropped (within LR5), if the source file's original dimensions are 7360x4912 (at least on my Win7 PC), LR5 outputs 1919px. If I create a 7380x4912 image, then LR5 resizes to 1920px correctly.
    For now I'll just have to go through the extra step of exporting from Bridge, but hopefully someone at Adobe's LR team sees this thread and is able to reproduce & fix this bug.

  • Where can I find the reports multitier server (reports 3.0)?

    Can anyone please tell me where can I find the reports multitier
    server 3.0.4.6.3?
    When I try to install the reports 3.0.4.7.0 from the patch 0598
    (pat0598.exe) it tells me that I must have installed the reports
    multitier server 3.0.4.6.3. But I can't find it anywhere, not
    even on the original installation CD.
    I have on disk the file r30mts32.exe. Is this the so-called
    reports multitier server? Is reports multitier server = reports
    server = r30mts32.exe? If so, why is that error occurring?
    Can someone please help me on this?
    Thank you.
    Paulo Ferreira
    null

    I agree and find it odd, but then, there is only the most rudimentary and superficial 'notes' -
    iTunes 9 also includes many other improvements, such as HE-AAC encoding and playback, more flexibility with Smart Playlists rules, simpler organization of your media files inside an iTunes Media folder, and more.
    Nothing like "fixed bug with using..."

  • Where can i get the report server name in Reports 10g

    Where can i get my report server name in 10G ?

    Thanks ..
    When i opened the bat file :
    i did not find any report server name ...
    This is my file :-
    @echo off
    REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
    REM
    REM rwdiag.bat
    REM
    REM Copyright (c) 2005, Oracle. All rights reserved.
    REM
    REM NAME
    REM rwdiag.bat - rw diagnostic tool
    REM
    REM DESCRIPTION
    REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
    REM
    REM NOTES
    REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
    REM
    REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
    REM
    REM MODIFIED (MM/DD/YY)
    REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
    REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
    REM sunaraya 04/14/05 - sunaraya_bug-4221172
    REM sunaraya 04/14/05 - Creation
    REM
    set ORA_HOME=C:\ORANT
    if "%ORA_HOME%"=="" goto ERROR
    set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
    %ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
    goto END
    :ERROR
    echo "ORACLE_HOME is not set"
    echo.
    :END

  • Hi, how/where can I file a complain against one premium re-seller here in the philippines?

    hi, how/where can I file a complaint against one premium re-seller here in the philippines?
    I was really ****** off on how they mishandled my warranty problem, they really wasted a lot of my time.

    You can try calling the Phillipines support number:
    http://support.apple.com/kb/HE57
    and asking to speak with someone on Customer Relations. If you haven't discussed the issue with the owner or manager of the reseller, though, start there first.
    Regards.

  • Where can I file the log file generate by RMAN using EM 10g.

    Hi
    I trying to find the log file that is generated using RMAN invoked from EM.
    I can only see the file using Internet Explorer with the URL:
    em/console/database/rec/bkpMgmt?skey=257&type=oracle_database&target=isatprod.dla_dns.com&event=showJobDe
    But I need to find where the log files are located in the filesystem because in other server I will not have EM with OC4J.
    Thanks.
    Juan.

    When use OEM for 10g and choose the option / Maintance/Backup Reports
    I can see information of all my backups, that includes:
    Backup Name - Start Time - Time Taken - Status - Type- Output Devices - Input Size .....
    When I click on Status field I can see the log file of this Backup.
    (whe click in status one URL will be invoked ,something like below URL)
    http://10.5.0.86:1158/em/console/database/rec/bkpMgmt?skey=259&type=oracle_database&target=isatprod.dla_dns.com&event=showJobDet&objType=jobDtl
    So the log file exist in any place for every backup made , the problem that I can not find it.
    The log has approximately 500 lines, if you want I can send you by email the log.
    Currently I don't have a repository catalog, I use a control file as repository.
    I think that 500 lines of log is not include in any dynamic performance views.
    Thanks
    Juan

  • How do I file Bug Report? Labview FPGA

    I'm not sure if this is a software bug or what, but I'm trying to run the Analog Input example project for Labview FPGA , in "Find Examples >> Hardware Input and Output >> R Series >> Basic IO >> Analog Input - R Series".
    The thing is, it works.. mostly..  I manage to send in a sine wave, and see it.  However, every now and then, when I set teh Waveform Graph X-axis to autoscale, and change the Update Mode, every time I put it into mode Scope Chart, it freezes my computer, and I have to physically power off my computer and power it back up (which i'm not happy about).  I'm using the default settings for the example, my card is in RSE mode, input signal at 25 Hz, 4V p-p
    I doubt anyone can guess why this is happening, but is there any way to file a bug report?
    Thanks,
    Hardware:  Quad-core Xeon 2.33 Ghz, 8 GB RAM, PXI-7583R FPGA, PXI-1036 Chassis
    Software:  Labview 8.6.1, LAbview FPGA 8.6., Vista 64-bit
    NI Hardware: PXI-7853R, PCI-5122, PCI-6733, PXI-1036, PCI-MIO-16E-4, PCI-6110
    Computer Hardware: Xeon Quad Core - 2.33 Ghz, 8 GB RAM
    Software: Labview 2009, Labview FPGA 2009, Vista 64-bit, MAX 4.6, DAQmx 9.0, NI-SCOPE 3.5

    1... Adding an unrelated question to a 3-month old post is not the best way to get your questions answered.
    Start your own thread next time.
    2... The example works fine for me.  The EQUALS function works just fine for strings.  Be aware of some things, though:
    Case matters.  If you want to ignore case, then uppercase both strings (or lowercase them) before comparing. 
    Length matters "X" is not the same as "X ". "123" is not the same as "1234".
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • Where can get file of SBO 2004 Server Installation Tool

    Hi,there
    Who knows where can I get the tools of
    "SAP Business One 2004 Server Installation Tool"
    It's now invalide from SAP SDN downloads URL,
    If anyone have this tool please let me get it from you.
    I'd like use it install B1 2004 & 2005 in a same OS.
    Thanks in advance!
    Lanjun

    Hi Lanjun,
    I got the information from responsible people that SDN is upgrading recently, the address is changed. Please try the latest one for Installation Tool below.
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/94a08a56-0701-0010-1690-958e7770dc20 [original link is broken]
    HTH,
    Nick

  • Where to file bug reports with Desktop Intelligence?

    Hi,
    Is this the right place to make report bugs on Desktop Intelligence?
    Regards.

    Hi Florian,
    assuming you have a customer ID for SAP support you should try to open a product error message (called OSS message) here: [http://service.sap.com/support].
    Regards,
    Stratos

  • Where can i get statspack report

    Hi,
    My database environment is very big,where i dont have permisson to perfstat user or even to view perfstat tables.Senior DBA runs stats pack report and will pass it to me.This time he sent in very bad format,so i am not able to read and analyze it.Now i want to get stats pack and analyze for very serious performance issue.If you go into file level where statspack report will be stored by default.If i get access to perfstat table,in which table i can see all sql related reports.DBA has to send it again or any other way to look on it.
    Thanks
    Anand

    If you have password for sys or system then you don't need password for perfstat user.
    To generate new statspack report execute spreport script (from sqlplus).
    @?/rdbms/admin/spreport

  • ADF Faces: Where can I see bugs status ?

    I am interested in seeing the status and a possible solution for bugs# 5918276 and 5929646 (reported by Steve Muench in his sample #107) where the getComponentClientId() function of the FacesCtrlAttrsBinding returns null if the binding has not previously "seen" a non-null value during the session as well as the fact that the FacesCtrlListBinding does not support a getComponentClientId() method.
    Thanks,
    Claudio.

    Hi Claudio,
    If you have an Oracle support agreement, you can log on to Metalink and perform an advanced search, clicking on the checkbox to include the bug database in your search. I found the first one, but not the second there.
    John

  • Where can I find Default Report Templates to copy from ?

    I want to make a new report template from an existing one.
    The existing one I want to make a copy of and edit is the Default: Look2 template.
    Darned if I can find it when creating a new report template.
    I have been through all other applications to try and no luck. Can anyone guide me to where I can find this to make a copy of ?
    Thanks !

    Hi,
    This has been discussed quite many times.
    See e.g. this post
    Re: Modifying Default Look 3 report template
    Regards,
    Jari

  • Where can I file a complaint?

    Hi all,
    I have been in contact with Adobe Tech Support since the beginning of November when I started receiving a message "licensing stopped working." I spent hours and hours calling tech support, with no solution. Often times my calls were hung up in transition. More than a few times, I was promised a call back "in ten minutes," or "in two hours," but calls were either never returned, or returned another day when I was at work (even though I told them I would not be available on that day). I tried all remedies they suggested, but they did not solve the problem. Finally they told me to send them a log file, which I did in the end of November. They said they would call me back in a few hours -- and it has been almost two months. I requested the result of log analysis a few times via Portal, but no reply. Meanwhile, I was unable to use my CS3 (I was using CS4 trial version for a while, but I was not even able to use it after performing one 'remedy' a tech support suggested). Yesterday I suddenly received a message from Adobe saying "Window 64 bit is not supported for CS3," when my OS is 32 bit.
    I am extremely frustrated with this situation and would like to file a formal complaint against Adobe. I asked a tech support rep to whom I can file a complaint, but he was not able to help. Could anyone suggest where I can file a formal complaint (either to Adobe management or the third party consumer adovocate organization)? Your advice would be appreciated.

    1st, read some of the messages at
    http://forums.adobe.com/community/general/adobedotcom_feedback where some options are discussed, including several messages with an email address that seems to work
    2nd, there is a Facebook page (mentioned in the link above) that sometimes gets a reply
    3rd, contact the Better Business Bureau in your area

  • How and where to post a bug report

    Hello,
    I find some bug on staroffice 8 and I'd like to report it. Also I want to post some suggestion for translation of italian version. Where I must post all these stuff?
    Regards,
    Marco Mangiante

    iPod Feedback.

  • Who holds Verizon employees and management accountable and where can I file a complaint.

    I feel that writing this letter is a waste of time, but I feel the way customer service reps (not all) as well as their managers (again not all) need to held accountable for lies and disrespectful business practices they place on loyal customers.  This is a long and confusing issue, but in as short as possible, I have been a loyal Verizon Wireless customer for several years. This past September 2014, I along with about 200 other loyal customers waited for several hours in anticipation of the IPhone 6 being released outside of a big box Verizon Store located at 7790 Montgomery Rd, Cincinnati, OH 45236, phone number (513) 984-9939. Because of my early arrival, I was number two in line and number two to enter the store once opened.  At approximately 7:30 a.m., Verizon Store employees and an unknown woman claiming to be a manager came from the store with flyers in hand and explained the purchase process.  She advised customers were able to buy a maximum of three phones, but could only buy one phone at retail price without contract.  I informed the manager that I was not eligible for an upgrade at the time, as my wife and I still had about a year of service left on my current contract.  At that time I was told “too bad, there are a lot of customers here for the same thing, and if you want the iPhones you will have to add two lines of service.”  I had about $2000.00 in my hand willing to pay full price for phones and have them swapped out for my current devices and was told “too bad.”  Well after waiting in line for the amount of time I had, I pretty much had no other choice, entered the store, and paid for two new lines of service in order to get two IPhone 6 plus devices with 128 gb of storage. 
    Immediate upon returning home, I contacted Verizon customer service (phone call one 9/19/14) and requested to terminate both lines, and move the IPhone 6 plus phones to my original lines.  Upon explaining the situation to the customer service rep, he was confused as to why I was told I had to open two new lines, but complied.  Later in the night, I had realized service was still not activated on the lines after switching the IPhone 6 plus to my original numbers and call customer service again (call two 9/19/14).  After explaining the whole situation over again, I was again informed that the store was wrong and should not have made me add two new lines.  This customer service rep informed me of the cancellation fees ($350.00 per line x 2), which I told her I was aware, and had planned to pay $950.00 per phone originally so had no problem paying the termination fee.  The customer service rep again told me that all had been completed and the lines would be turned off.
    On Saturday September 20, 2014, I signed on to my Verizon wireless.com account and saw that I still had two lines (previously told were shut off) still active on my account, with no phones associated with the numbers.  Again, upon contacting customer service (call 3 9/20/2014) I had to explain the entire situation all over.  At that time I was advised by the customer service rep, that because I was not returning the phones and just wished to pay the termination fees, that I would need to wait until after 14 days of service to call in and cancel the lines, and also have to request a refund on the activation fees (should be waived if canceled within 72 hours of activation) and any service charges associated with having two lines with no physical phones actually being attached to them.  At this point I thanked the customer service rep and was informed that all notations to the account were visible in the account to anyone I spoke with.
    Friday October 3, 2014, I again contacted Verizon customer service (call 4 10/3/2014) to cancel these lines.  Upon explaining the situation again to the customer service rep, I was informed the store I got the phones from (A VERIZON WIRELESS OWNED STORE) had lied to me in that I needed to add lines.  At this point, the female representative informed me the activation fees would be waived, along with any other fees, and the lines were cancelled. 
    Saturday October 4, 2014 I again logged onto my Verizon Wireless.com account and saw that the lines I was told had twice been removed, were still active and alive with no physical devices actually being associated with the lines of service.  AGAIN, calling customer service (call 5 10/4/2014) I spoke with a gentleman and expressed my frustrations as to being misinformed several times thus far.  At this point, the customer service rep, after keeping me on hold for about 45 minutes, returned to the phone and advised my that the lines were set for cancelation, but not until my next billing cycle, and that I would need to call in again once all service, activation, and whatever else charges were put on my account to have them removed.  During the conversation, (without me asking for a single thing at any point during the conversation except just to have the lines turned off and refund the fees) The customer service rep informed me that he was sorry and his manager was sorry for inconvenience that VERIZON had caused me, as a small toke of VERIZON’s appreciation, VERIZON would waive any and all fees associated with the two lines I was forced to add, to include any and all early termination fees.  Again, I never once asked for anything, but was offered by VERIZON employees and a VERIZON manager.  I was also informed that when I did call back in, the next customer service rep would see all of these offers in my account notations and would comply.
    Tuesday October 7, 2014, I was able to view my bill and had observed the added charges associated with account activation, and lines of service.  At that point I again called Verizon customer service (Call 6, 10/7/2014) to have these charges removed.  Upon calling and AGAIN explaining the two weeks of hell VERIZON had caused me, I was again apologized to, and informed that the last customer service rep had notated everything as I had explained and was informed and exactly quoted by the representative from VERIZON “We are nothing without our integrity at VERIZON, and VERIZON told you we would waive all of these fees (as notated in my account) VERIZON will stand by our word.” At that point, I was told I would need to be placed on hold as the charges and fees were large (about $263.00 in service fees and $700.00 in early termination fees) it would take a while for the customer service rep to work with his manager to have these charges removed (and in the case of the ETFs, not post to the account at my next billing cycle).  After one hour of sitting on hold, I was again in contact with the customer service rep and told, he and his manager had put in for every single refund and credit, the VERIZON MANAGER had approved all, but one final approval was needed which may take a day or two.  AGAIN all of this is notated in the account as to offers and promises made by VERIZON wireless employees and managers, and again I had NEVER asked for a single penny refunded, but was offered.  I AGAIN was completely willing to pay for the phones and the ETFs without problem, but was again and again offered such refunds and credits by VERIZON employees.
    Wednesday October 9, 2014, because of the continual misinformation I have been given by VERIZON employees, I contacted VERIZON customer service again (call 7, 10/9/2014) to check on the status of the credits and refunds.  At that time, I was informed, that many of the credits had been approved, but both ETF fees were denied and would only be refunded if I returned the devices.  As frustrated and confused as I was, I calmly explained every single thing that was offered to me again by VERIZON and was confused as to why a MANAGER for VERIZON would offer such things and then they would be denied.  The female customer service rep informed me that she was unfamiliar with the situation, would message the male customer service rep and or manager I spoke with on October 7, 2014 and have them reach out to me to explain. I was also told I would hear from them within a “few hours.”  This call was placed at about 9:00 a.m., and by 6:00 p.m. I had still not heard anything back from VERIZON.  At that time I again called VERIZON customer service (call 8, 10/9/2014) and spoke with another customer service rep.  Again for the 8th time explained the entire VERIZON lying situation, and was told that he (VERIZON representative) saw was I had been offered several times (refunds and credits) in the account notations and “too bad, VERIZON does not offer refunds or waivers of ETFs.”  At this point in the conversation, without completely cursing out the representative, I asked to speak with his supervisor and was turned over to another supervisor to speak with.  Upon speaking with the supervisor, I was informed (for the first time) that although VERIZON WIRELESS employees / MANAGERs had offered me refunds of ETFs, WHICH WAS DOCUMENTED NUMEROUS TIMES BY VERIZON in my account details, VERIZON simply could not waive these fees.  I again informed the manager that I didn’t care about the fees and was willing to pay, but I was tired of being LIED TO.  At that point in the conversation, I was again apologized to over and over again and as a token of apology from VERIZON, he a VERIZON MANAGER offered me a $70.00 bill credit in order to help with the ETFs.  Again, I never once asked for anything, but was offered time and time again from VERIZON EMPLOYEES and MANAGERS.  I thanked him for his offer and the call ended.
    October 10, 2014 (AGAIN after repeatedly being lied to contacted VERIZON customer service to check on the status of my credits (call 9, 10/10/2014).  At that time, I spoke with a female representative and again explained the entire dilemma caused by VERIZON.  Again, I was apologized to countless times and was informed that a bill credit for $70.00 was pending as I was informed on the previous night by a VERIZON WIRELESS MANAGER, but she did not have access to see any further details.  After again apologizing countless times, the customer service representative seemed to be frustrated that I had been treated so negatively and informed me she was going to address this with her manager.  Upon her return to the line, and again without ever asking for one single thing, the VERIZON representative with her VERIZON MANAGER offered to meet “half way” with regards to the lowest ETF fees associated with my accounts and provide a $235.00 bill credit to help me and as a token of “sorry for VERIZON’s screw up and constant lies.”  I was also told I would be contacted by her manager within four hours at approximately or before 2:00 p.m.  5:00 p.m. on that same date, after not hearing anything back I again called VERIZON customer service (call 10, 10/10/2014) spoke with another customer service rep and told her the entire story over again.  I told the rep I wanted to speak with a manager right at that moment and was placed on the phone with a woman named Linda I believe. Linda informed me that the credit I was previously told I would be given earlier on that date was rejected and I would not be given it.  Again without completely going nuts, I calmly explained my complete disgust with VERIZON and the constant lies I was being told.  Again after countless apologies from another VERIZON MANAGER, she politely explained to me again the whole VERIZON cannot offer such refunds or credits associated with ETFs and was appalled that anyone in VERIZON would offer such things knowing they could not be given.  While working with her, she informed me the best solution to saving money was to cancel my original phone accounts and keep the two new lines that were pending deactivation, which would result in a $250.00 reduced ETF as opposed to a $700.00.  I agreed based on her advice without argument and was informed it may take a few hours for the new numbers to be placed back on the IPhones.  Two hours later, my phones still not turned on, I contacted VERIZON again.  I had also noted that every single bill credit previously applied to my account was back on the account.  At this point being as furious as I was, I again called VERIZON WIRELESS (call 11, 10/10/2014) demanded to speak with a MANAGER and was placed on hold.  After waiting for an hour on hold (no exaggeration) the customer service representative returned, apologized for everything including the wait time, and placed a male MANAGER on the phone. After explaining the entire three plus week VERIZON lying dilemma, which he was able to see in the account notes where every VERIZON employees acknowledged the misinformation of the previous employee I had spoke with, he again apologized and explained that I did not lose the bill credits, but because two lines had been canceled, the credits were instead applied to my unbilled ETFs, and they would appear on my next bill.  He also informed the SIM cards in my devices would still require more time to activate and that they should be turned on by 7:00 a.m. the next day.
    While doing research on the SIM issue, I found that VERIZON policy was immediate and SIMs would not require rebooting time to come out of I believe it is called “AG” or “aging” status.  Again contacting VERIZON customer service (call 12, 10/10/2014) spoke with a female customer service agent, who actually looking back was the only one not to represent falsehoods or lies, informed me that because the SIM cards were previously associated with cancelled lines, I would need to go to a VERIZON wireless store and get two new SIM cards.  At this point in the day it was about 10:00 p.m. and all VERIZON stores were closed for the day.  With no choice in the matter, I agreed, and asked just out of curiosity, on the status of the$70.00 bill credit, I was promised on October 9, 2014.  At that point the rep informed me that she was able to see that the VERIZON MANAGER had notated and put a credit request in while I was speaking with him, but then immediately cancelled his own request and closed the situation immediately following the completion of our call.  I believe at this point in the entire situation I was so fed up this did not surprise me whatsoever so who could I complain to.  The very nice customer service representative again apologized for the continued lies I was told and offered me (not a bill credit), but a data GB credit for 12 months (again without me asking for anything).  In her own words “I do not want to promise you the world and then lie to you and get your hopes up thinking it will happen as has happened to you numerous times.”    I truly appreciated her honesty and her acknowledgement of the complete disgusting actions by previous VERIZON employees and MANAGERS. 
    The next day October 11, 2014 I drove with both IPhones to the Verizon big box store, explained the entire story to the employee, was apologized to for a 20 minutes, the manager came out and apologized as well, GREAT CUSTOMER SERVICE!  The store is located at 2028 Florence Mall Rd, Space 1139, Florence, KY, (859) 746-3790 (Manager was great so was employee).  Never once offered me anything to make up for mistakes VERIZON had made in the past, which I really didn’t care because I never asked nor expected anything, but were truly grateful for my service (I am military and a Federal Law Enforcement Officer) and truly apologized for the actions of the Verizon Sore in Cincinnati Ohio (Again the manager stated the manager at the Cincinnati store lied), and especially apologized for all the lies and mis-information given to me over a three plus week time period.
                Finally, October 15, 2014, I log in to my Verizon wireless account to view my features and reactivate VERIZON’s high definition calling features and see that since September 19, 2014 (original date I purchased the IPhones) I have been charged for Verizon Cloud storage.  I HAVE NEVER AGREED TO THESE SERVICES, NEVER REQUESTED THESE SERVICES, NEVER EVEN NEW THEY WERE THERE!!!!  Again had to call VERIZON for the fraud and lies they are perpetrating on a daily basis, COMPLAIN to another customer service rep (call 13 10/15/2014) in order to get the fraudulent charges removed from my bill. 
    Conclusion
                Here I sit writing this long complaint that no one in VERIZON will ever be held accountable for, no one will answer for the lies, mis-information, and disrespect employees and VERIZON MANAGERS perpetrate even though each lie was documented by VERIZON in account notations, and no one will be accountable for the lies the retail stores tell in order to increase their QUOTA to activate a certain amount of new lines per month.  I am utterly disgusted with the treatment I have received, will be requesting these notations (if they have not been deleted from my account), have documented each conversation, and recorded many of the conversations, with an end result of pretty much nothing.  VERIZON does not care about their customers and could probably care less about my terrible experience.  While there are several other cellular options available, they are all crooks and liars just as the perfect documented examples of VERIZON employees and management lying in this case.
    Christopher

        Giogetz,
    Thank you for taking the time to share your experience. I am shocked by the many representatives that you had to speak to regarding your first request. This situation should have never gotten to be complicated and resulting in multiple calls from you. I apologize on behalf of those representatives for dropping the ball. I do agree that the representatives do need to be held accountable and I would like to submit feedback for those that you worked with. I have sent you a direct message. Please reply to the direct message so I can begin submitting feedback.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Sender Adapter File Content Conversion

    Hi everyone, Can someone help me out here? For some reasons, out of the fields declared, only 20 gets filled! Scenario, I've configured the file sender adapter with file content conversion.  It's picking up an fixed length ASCII file. Here are the Co

  • IDOC Runtime error TIME_OUT has occurred

    Dears,           We are having a Machine to Machine Order interface, where huge volume of order files are being sent to SAP from legacy system through XML files which PI interface converts as Inbound IDOCs. The issue we are facing here is : when huge

  • CON2 Poor perfomance

    Hi Guys, I have a poor performance when execute the transaction CON2(Module CO), so i spent the run in background mode. And still having performance problems. How can i improve the performance of  this transaction ? My environment SAP: 4.7 SAPKH47027

  • Unable to create a simple test client. Got ConfigException: JBO--33001

    I am trying to create a simple test client as per ADF training manual. Have just created an empty AM. The test client is giving this error at runtime. The test client looks like: public static void main(String args[]) String amDef = "test.TestModule"

  • Disappearing downloaded items

    I recently suffered a major drive crash. I sent Apple a message regarding recovering some of my downloaded items (specifically a season of a TV Show). It downloaded, but now I can't find it at all. It is not in its folder, and iTunes doesn't know whe