Where do I configure Adapter Framework connection to SLD?
Hi.
It looks like my AF can not read data from SLD. JPR complains that usename/password is invalid and File adapter simply states SLD can not be reached.
Where do I find logs for SLD, to check what username passord is used? How do I change this username and password for AF?
Sincerely,
Evgeny.
I do not have any problem connecting to SLD from ABAP. It is Adapter Engine. If understand correctly it is J2EE.
Sincerely,
Evgeny.
Similar Messages
-
Hello Experts,
I am configuring the scenario ( AS2 to EDISeparator and EDISeparator to IDOC ).
Can you please help me with the error below which is from the either the EDISeparator Receiver channel or the EDISeparator Sender channle.
09.06.2014 17:52:18.709
Information
Message is encrypted with 1.3.14.3.2.7 algorithm
09.06.2014 17:52:18.778
Information
AS2 Message is signed with SHA1 (1.3.14.3.2.26) algorithm
09.06.2014 17:52:18.779
Information
AS2 Message message signature is validated, signer ID is X509CertSelector: [ Serial Number: 1624063516 Issuer: CN=Mendelson AS2 TEST,OU=Integration,O=Mendelson,L=Berlin,ST=Unknown,C=GE matchAllSubjectAltNames flag: true ]
09.06.2014 17:52:18.784
Information
AS2 document size is 350 Bytes
09.06.2014 17:52:18.784
Information
Payload charset converted from ISO-8859-15 to ISO-8859-15
09.06.2014 17:52:18.785
Information
B2B EdifactConverterModule : EDI format detected as EANCOM
09.06.2014 17:52:18.785
Information
B2B EdifactConverterModule: Message will be read as ISO-8859-1.
09.06.2014 17:52:18.785
Information
MP: processing local module localejbs/EdifactConverterModule
09.06.2014 17:52:18.785
Information
0}: The module-paramteter "eancom.subversion.prefix" is not set. Using default value "false"
09.06.2014 17:52:18.786
Information
0}: The module-paramteter "eancom..audit" is not set. Using default value "false"
09.06.2014 17:52:18.791
Information
MP: processing local module localejbs/CallSapAdapter
09.06.2014 17:52:18.791
Information
Application attempting to send an XI message asynchronously using connection AS2_http://sap.com/xi/XI/AS2
09.06.2014 17:52:18.792
Information
Trying to put the message into the send queue
09.06.2014 17:52:18.831
Information
Message successfully put into the queue
09.06.2014 17:52:18.831
Information
The application sent the message asynchronously using connection AS2_http://sap.com/xi/XI/AS2. Returning to application
09.06.2014 17:52:18.836
Information
MIC (DeJYUIusqQj6aaYRASdHhAo+4J0=) is calculated using SHA1 algorithm.
09.06.2014 17:52:18.838
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:18.843
Information
Message status set to DLNG
09.06.2014 17:52:18.845
Information
MDN is succcessfully signed with SHA1 (1.3.14.3.2.26) algorithm
09.06.2014 17:52:18.859
Information
Trying to put the message into the send queue
09.06.2014 17:52:18.912
Information
Message successfully put into the queue
09.06.2014 17:52:18.913
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:18.918
Information
Message status set to DLNG
09.06.2014 17:52:18.961
Information
Trying to put the message into the send queue
09.06.2014 17:52:19.001
Information
Message successfully put into the queue
09.06.2014 17:52:19.001
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:19.006
Error
MP: exception caught with message No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.006
Information
Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
09.06.2014 17:52:19.006
Information
Message status set to DLNG
09.06.2014 17:52:19.009
Error
Exception caught by adapter framework: No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.010
Error
Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.015
Information
The asynchronous message was successfully scheduled to be delivered at Mon Jun 09 17:57:19 CEST 2014
09.06.2014 17:52:19.015
Information
Message status set to WAITHello Ruchir Sinha and Dimitri Sannen,
I think I have progressed a bit. Just unsure of the usage of the Module configuration .I now get a new error (see below) and the updated config details are :
Sender Interface :
Receiver Interface :
Sender AS2 config :
Receiver EDISeparator config :
Sender EDISeparator config :
Receiver IDOC config :
IDoc details configured but not added in this document
16.06.2014 11:52:35.414
Information
The message was successfully retrieved from the send queue
16.06.2014 11:52:35.420
Information
Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
16.06.2014 11:52:35.420
Information
MP: processing local module localejbs/ModuleProcessorExitBean
16.06.2014 11:52:35.420
Information
Message entered AF MP exit bean and will now be passed to the JCA adapter
16.06.2014 11:52:35.420
Information
Message status set to DLNG
16.06.2014 11:52:35.433
Information
UNA segment UNA found
16.06.2014 11:52:35.444
Information
Parsed UNB segment 333333333/014 to 111111111/014
16.06.2014 11:52:35.445
Information
Parsed UNH segment ORDERS D96A
16.06.2014 11:52:35.514
Information
Searching sender channel for Eancom message part message with Message type ORDERS, Message version number D, Message release number 96A, Interchange sender identification 333333333, Interchange sender identification code qualifier 014, Interchange recipient identification 111111111, Interchange recipient identification code qualifier 014, Message Subversion EAN008, Message Agency UN
16.06.2014 11:52:35.579
Information
Sender channel (Channel) keys: ObjectId=7abf551ddbb638268f91af80ec1c04c8 values: ToPartySchema= Attributes=(Attributes:Channel:EDISeparator:INBOUND) values: edisep.advanced=false snd.interchangeSenderId=.* snd.tradacommessagetype=.* snd.xpath= snd.xpath.value= snd.filterCondition=equal snd.edifactMessageReleaseNumTxt= snd.tradacomMessageTypeUsingFreeText=false snd.eancomMessageReleaseUsingFreeText=false snd.eancomMessageVersionFreeText= snd.odetteMessageType=.* snd.edifactMessageVersion=.* snd.xml.splitPath=null snd.eancomMessageVersion=.* snd.odetteMessageVersion=.* snd.edifactMessageRelNumUsingFreeText=false snd.otherVersionReleaseIndustryIdentifierCodeEnabled=false adapterStatus=active snd.vdaMessageType=.* snd.eancomCONTRLMessageRelease=3 snd.odetteMessageTypeTxt= snd.tradacommessageversion=.* snd.edifactMessageVerNumUsingFreeText=false snd.edifactMessageTypeUsingFreeText=false snd.xpathUsingFreeText=false snd.interchangeSenderIdCode=.* snd.otherVersionReleaseIndustryIdentifierCode=.* snd.odetteMessageTypeUsingFreeText=false snd.tradacomreccode=.* snd.edifactMessageVersionFreeText= snd.edifactInterchangeRecipientIdentification=.* eoio.sequenceId= snd.edifactMessageTypeTxt= snd.odetteMessageVerNumUsingFreeText=false snd.eancomMessageVerNumUsingFreeText=false snd.interchangeReceiverId=.* snd.eancomMessageRelease=.* snd.tradacomsendername=.* snd.tradacomMessageTypeTxt= snd.vdaLieferantenNummer=.* snd.interchangeReceiverIdCode=.* snd.edifactInterchangeSenderIdentificationCode=.* snd.odetteMessageVersionFreeText= snd.versionReleaseIndustryIdentifierCode=.* snd.edifactInterchangeSenderIdentification=.* snd.edifactMessageType=.* snd.eancomMessageType=.* snd.xpathTxt= snd.vdaMessageTypeTxt= deliverySemantics=eo snd.eancomMessageReleaseTxt= snd.plainmessagetype=.* snd.xml.split=false snd.edifactMessageRelease=.* snd.vdaMessageTypeUsingFreeText=false snd.tradacomrecname=.* edisep.addParameterParams=TableData: edisep.addParameterParams {} snd.encoding=iso885915 snd.vdaKundenNummer=.* snd.tradacomsendercode=.* snd.edifactCONTRLMessageRelease=3 snd.edifactInterchangeRecipientIdentificationCodeQualifier=.* snd.transactionSetIdentifierCode=.* Service=ASJAVA_DX5 Channel=B2BSE00002_O2C_ORDERS_PO_ECC_READ_EDISeparator EngineType=CA Party= TransProt=XI TransProtVers=1.0.0 FromPartySchema= FromPartyAgency= Direction=I MsgProt=EANCOM MsgProtVers=1.0.0 EngineName= AdapterType=EDISeparator AdapterSWCV=06c536e6fafe11e0bb1cea8f0a4290b1 ToPartyAgency= AdapterNamespace=http://sap.com/xi/XI/EDISeparator found. New message ID is f18894a8-f53b-11e3-a748-00001e96c7e2
16.06.2014 11:52:35.586
Error
MP: exception caught with cause javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.586
Error
Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.590
Error
Exception caught by adapter framework: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.591
Error
Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule -
I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?
Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem. -
Adapter Framework unable to create outbound JCA connection
Hi All,
I have a requirement in which I have to send a request from Siebel to SAP & get a response from it.
I have deployed my process on Oracle AS BPEL console.
When I try to initiate my deployed process I get below mentioned error.
<summary>
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - WSIF JCA Execute of operation 'GetDetail' failed due to: Adapter Framework unable to create outbound JCA connection.
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Problem activating adapter. (JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjcorfc in java.library.path]. java.library.path [D:\product\10.1.3.1\OracleAS_1\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\product\10.1.3.1\OracleAS_1\opmn\bin;D:\product\10.1.3.1\OracleAS_1\opmn\lib;D:\product\10.1.3.1\OracleAS_1\bin;C:\WINDOWS;C:\WINDOWS\system32]). Check logs for more information
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
http://127.0.0.1:8888/orainfra/wsil/adapters/applications/GetDetail_invoke.wsdl?wsdl [ GetDetailPortType::GetDetail(input_GetDetail,output_GetDetail) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Problem activating adapter. (JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjcorfc in java.library.path]. java.library.path [D:\product\10.1.3.1\OracleAS_1\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\product\10.1.3.1\OracleAS_1\opmn\bin;D:\product\10.1.3.1\OracleAS_1\opmn\lib;D:\product\10.1.3.1\OracleAS_1\bin;C:\WINDOWS;C:\WINDOWS\system32]). Check logs for more information
Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console.
</summary>
I have installed Oracle Adapter 10.1.3.1 on Oracle SOA Suite 10.1.3.1 & then upgraded my SOA Suite to 10.1.3.3.
Its a very critical issue.
Please help me out of it.
Thanks & Regards,
ShantyI have resolved this error.
If you are facing the same error then follow the following steps:
1. Shutdown the Oracle SOA Suite.
2. Copy sapjcorfc.dll into C:\WINDOWS\system32
3.Edit oc4j-ra.xml located at below locations
a. OracleHome\j2ee\home\application-deployments\default\jca-app-adapter
b. OracleHome\j2ee\home\connectors\jca-app-adapter\jca-app-adapter\META-INF
by editing the values
<config-property name="AdapterName" value="SAP"/>
<config-property name="Config" value="SAP_Target_You_Have_Created_in_iaexplorer"/>
Cheers,
Shanty -
Where do we configure Seeburger adapter in case of outbound?
<b>Hello Freinds,
Can you please help me out where do we configure the Seeburger adapter if the sender is EDI ANSIX12...I mean at what point of time we use this Seeburger adapter to convert to XI Specific XML format?</b>Hi
seeburger adapter is used when you want to convert an EDI format into the EDI XML format so that it can be uunderstand by the XI, bcoz XI can understand only the XI.
seeburger have povioded following adapters
1.AS2
2.OFTP
3.FTP/VAN
4.X400P7
the selection of the adapter depends on the requirement.
Thanks
Rinku -
Where is the Adapter Framework/SDK ?
Hi
I have developed a JCA 1.5 resource adapter for integration test purpose.
I thought the "hard" part done...obviously I was wrong.
I know I can integrate it within BPEL PM as "explained" in this link: http://www.oracle.com/technology/products/integration/adapters/pdf/Adapter%20Development%20cookbook.pdf
Unfortunately this document doesn't realy help and some related tools or samples seem unobtainable.
1.- Does anybody know where I can get the Adapter Framework/SDK mentioned in this document ?
2.- Where can I find the -also mentioned- sample related to the MyOwnPersonalRecord -> XMLRecord translation ?
DominiqueThere is also an AIR SDK outside the gaming SDK. I am looking for the Flex/AIR combination.
-
HT200259 Configuring adaptive firewall for VNC and RDP connections
Hello, I'm using Yosemite with OSX Server. Is there a way of configuring adaptive firewall for VNC and RDP connections?
Apple has never documented what the adaptive firewall really does, as far as I know. It seems that the built-in network services send it some kind of notification whenever there is a connection attempt. The Screen Sharing service is one of those, so it should be protected. There is no built-in RDP service, so if you somehow added one, it would not be protected.
-
Error on Adapter Framework with Seeburger component
Hi,
I have the Generic EDI component from Seeburger Adapter, and I have a communication channel using the FTP Adapter from Seeburger with the module localejbs/Seeburger/solution/generic-edi, and when execute the communication channel, I have an error with the solution, the error is:
"Exception caught by adapter framework: Path to object does not exist at solution, the whole lookup name is localejbs/Seeburger/solution/generic-edi.".
I see the Seeburger documentation about installation and configuration from FTP Adapter, but I don´t find information about this error, somebody help me please with information about this error, what configuration I need review or where find documentation about this problem?.
We post a note about this problem on the OSS, the content of the note is:
We have installed the Seeburger's FTP adapter in SAP XI.
A communication Channel is calling this adapter nd executing a module called localejbs/Seeburger/solution/generic-edi. When the adapter is called the next error is shown;
Exception caught by adapter framework: Path to object does not exist at
solution, the whole lookup name is localejbs/Seeburger/solution/generic-edi.
Delivery of the message to the application using connection
FTP_http://seeburger.com/xi failed, due to:
com.sap.aii.af.ra.ms.api.RecoverableException: Path to object does not
exist at solution, the whole lookup name is
localejbs/Seeburger/solution/generic-edi.:
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at solution, the whole lookup name is
localejbs/Seeburger/solution/generic-edi..
Also, the host-ftp solution was used instead of the generic-edi with the same result.
The system we have is SAP PI 7.0 SPS09 with Seeburger 1.6.
Thanks and greetings,
Hervey.Hi,
I have the same problem. What was the solution?
Regards
Kristian -
Adapter framework failing to send message
Hi,
I am facing an issue in XI, where the adapter framework is getting failed to send the message. The message is also not getting reflected in SXMB_MONI,
"Transmitting the message to endpoint http://server:8080/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 404 : Not found."
No service using the ICM port 8080 is working though active. No XI service, even the ping service in sap/bc/ping is not working.
I have checked the following:
1) SLDCHECK (browser opening properly). In ABAP part i am getting error
Use transaction SLDAPICUST if you wish to maintain
Launching the SLD GUI in a separate browser window.
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
for troubleshooting the above error i have gone through the link
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Still the problem persists while calling function LCR_LIST_BUSINESS_SYSTEM
2) Then i checked the ping (path - http://server:8080/sap/xi/engine?type=entry ) -- its also not running and showing error :
Service cannot be reached with error code 404 not found.
3) The RFC XIINTEGRATION_SERVER is showing also showing error 404.
4) Checked ICM port - its 8080
Inspite of working hard over this issue, still unable to resolve this issue.
Please help me. Awaiting for your helping suggestions
Thanks in advance..> Still the problem persists while calling function LCR_LIST_BUSINESS_SYSTEM
> 2) Then i checked the ping (path - http://server:8080/sap/xi/engine?type=entry ) -- its also not running and showing error :
> Service cannot be reached with error code 404 not found.
>
> 3) The RFC XIINTEGRATION_SERVER is showing also showing error 404.
> 4) Checked ICM port - its 8080
>
have a look for LCR_LIST_BUSINESS_SYSTEM in the below link
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Regards,
Sarvesh -
Messages stuck in queue AFWRecv of Adapter Framework
Hello,
Messages stuck in queue AFWRecv of Adapter Framework in our production system(trace in RWB: "to be delivered")
in URL http://xxxxxxx:50000/MessagingSystem/monitor/systemStatus.jsp we can see:
Queue Info
Queue Name isStarted QueueSize ThreadCount (working) MaxThreads
AFWCall true 0 0 (0) 20
AFWRecv true 954 10 (10) 10
AFWRqst true 0 0 (0) 20
AFWSend true 0 0 (0) 10
We have tried to resend the first message but that´the result:
Time Stamp Status Description
2010-10-09 11:24:06 Success The message was successfully received by the messaging system. Profile: XI URL: http://xxxxxxxxx:8100/MessagingSystem/receive/AFW/XI
2010-10-09 11:24:06 Success Using connection AFW. Trying to put the message into the receive queue.
2010-10-09 11:24:06 Success Message successfully put into the queue.
2010-10-11 00:01:46 Success Recovering from loss of connection to database; message loaded into queue by recover job: System Job (Failover Recovery)
2010-10-11 02:48:16 Success System Startup: Message successfully loaded into queue: AFWRecv.
2010-10-13 11:03:19 Success Admin action: Trying to redeliver message.
2010-10-13 11:03:46 Success Admin action: Trying to redeliver message.
Since then it stucks there...
Any help would be apreciated....Hi,
Go to the runtime workbench --> Message Monitoring --> Click on the 'Configure Table Columns' > Check Sequence ID, Serialization Context & Sequential Number options.> and then click 'Apply'.
Then in the 'Serialization Context' column you will get the queue ID for the stcuk message.
Take that value and click on the 'Show additional Criteria' option on the top and put this value in the 'Serialization context' parameter. Also,select the start/end date as 'This year' --> start.
You will get all the messages stuck in that particular queue for this yoear, try to rectify them, so that your message will be processed.
-Supriya. -
Adapter Framework not showing in the SLD or RWB
Hi,
I am on XI3.0, This is referring the the central J2EE adapter.
The adapter framework/engine is not showing up as a component in the runtime workbench or under the technical systems of type XI in the SLD. All other XI components are showing up in both places. What could be causing this? When I go the the adapterframework monitor itself, the adapters show as active.
Regards,
MrudulaI am not sure, but, can you check whether the exchange profile and the SLD Data Supplier service is configured properly on the central J2EE Engine where the Adapter Framework is running.
Warm regards,
Venki. -
Alerts not getting triggered from Adapter Framework
Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
<b>However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)</b>
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
<i> No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )</i>
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya -
Where to download B2B Adapter?
where to download B2B Adapter that allow BPEL to integrate with Oracle B2B Integration??
thanks, i manage to get the B2B adapter but i face another problem when i try to deploy.
here is the error i got from the log.
ORABPEL-05207
Error deploying BPEL archive.
An error occurred while attempting to deploy the BPEL archive file "bpel_Enqueue850_1.1.jar"; the exception reported is: Problem 1: [http://localhost:9700/BPELConsole/wsil/adapters/B2B/EDI_X12/X12_4010-4010/850/850+Definition?wsdl]: Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element: {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/b2b'
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the OC4J Application server or
2) the 'location' attribute in $J2EE_HOME/application-deployments/default/deployed-adapter-name/oc4j-ra.xml has not been set to eis/b2b. In the last case you might have to add a new 'connector-factory' entry (connection) to oc4j-ra.xml.
Please correct this and then restart the BPEL/OC4J Application Server
any idea how to fix this problem? -
Hi all,
Is there any blog that explains about adapter framework and adapter engine. If not, can someone please briefly explain me about adapter engine and the architecture? I have read the help.sap links. But still not clear.Hi Aarthi ,
These r the details regarding Adapter Framework & Adapter Engine.
Adapter Framework :
It is a part of the Adapter Engine, which provides interfaces for configuring, managing, and monitoring adapters.SAP XI requires an adapter framework to communicate outside of the SAP system. These adapters translate code from external applications to an XML message for NetWeaver processes using the Java Connector Architecture.Adapter framework (JCA )based integrate application systems and business partners via resource adapters.
SAP XI provides a set of adapters to connect SAP as well as non-SAP applications with each other and thus to enable them to participate in the exchange of XML messages. An adapter is required to connect other applications or technical systems, or to participate in B2B communication via specific industry standards like RosettaNet. SAP provides certain adapters for use with SAP Exchange Infrastructure, and relies on an ecosystem of partners to provide adapters for other applications or industry standards. These partner adapters are sold and delivered through SAP.
The SAP Partner Connectivity Kit (PCK) enables smaller companies that do not dispose of an SAP XI installation to connect to SAP XI.
Customers and partners can also develop their own adapters for SAP XI. To do this, they can use the Adapter Framework in the Partner Connectivity Kit (PCK) and refer to the detailed documentation on adapter development. For more information, see SAP XI 3.0 Online documentation under SAP XI: Runtime → Connectivity → Partner Connectivity Kit → Adapter Development.
Overview of Adapters for SAP XI 3.0
Application Adapters
Technical Adapters
Industry Standard Adapters
Mainframe/Transaction Adapters
Note: All adapters are available from SAP XI 3.0 onwards.
Adapter Framework provides common functionality for Adapter
Engine and SAP Partner Connectivity Kit
Adapter Framework is based on SAP J2EE Engine as part of SAP Web AS.
Adapter Framework inherits properties and features such as scalability, clustering, high availability, thread management, etc.Adapter Framework provides its own queuing and logging services.Temporary stand-alone operation without connection to an Integration Server is possible, while still providing e. g. guaranteed exactly once messaging to and from connected application system
Adapter Framework supports J2EE Connector Architecture (JCA)
JCA is standard architecture for connecting the J2EE platform to
Enterprise Information Systems (EIS), e. g. ERP, DBMS, etc.
A Resource Adapter plugs into an application server, providing
connectivity between the EIS and a Java application
JCA enabled Adapter Framework provides defined interfaces to
which both our adapters and 3rd party adapters can conform
JCA is a widely accepted standard that 3rd party adapter providers
are familiar with
Details about architecture of adapter, types of adapter.. can be found at the following web-sites :
http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst11.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d5e190-0201-0010-0daf-e9e270f85ebb
http://www.erpgenie.com/netweaver/xi/adapters/index.htm
http://documentation.softwareag.com/crossvision/xie311/admin/config.htm
http://www30.sap.com/korea/company/events/techday05/img/data_04.pdf
Adapter Engine :
You use the Adapter Engine to connect the Integration Engine to SAP systems (RFC adapter) and external systems. You use the various adapters in the Adapter Engine to convert XML- and HTTP-based messages to the specific protocol and format required by these systems, and the other way around.
The Adapter Engine is based on the adapter framework.
The Adapter Engine is a separate software component that is automatically installed on the Integration Server. In this case, it is the central Adapter Engine. However, you can also install the Adapter Engine separately on another host. This is then a non-central Adapter Engine.
The XI Adapter engine is the home of the majority of the XI adapters. Only the IDoc adapter and the plain HTTP adapter do not reside on the adapter engine. They reside on the Integration Server.
It is fully integrated in to the XI landscape with tools provided for configuration, logistics and monitoring. It's Adapter Framework is based on the JCA
Details about Adapter engine can be found at the following web-sites :
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
********Please reward points if u find this useful
cheers,
gyanaraj -
PCK and Adapter Framework diff.
Hi experts, could you pls explain the differences between PCK and Adapter Framework engine?
Hi,
the PCK is used,if you want to exchange Messages from or to XI. That means for that,you need on the sender or receiver Side a XI System. The one way is,that a XI sends the Native XML SOAP Messages via XI Adapter to the PCK.Then the message can be converted in some other formats,because the PCK has its own Adapter Engine. But there is no IDOC adapter.
The second way ist,that for example you pick up XML Files with the PCK and transfer it to an XI system in the Native XML Format. With the PCK you can't do a File-to-File Transfer.
The PCK is a standalone Application,which has its own Monitoring,Configuration and User Management.Instead of that, a decentral Adapter Engine is directly connected to an XI System and is configured centrally in the XI System
PCK is a mini version of XI. It is used by smaller business partner (who cannot afford to install a full blown version XI) to exchange XI messages with large companies (having an XI installation).
PCK has its own local Adapter engine.
Check the following links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f83d790-0201-0010-629d-ab5bf10c94e4
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
http://help.sap.com/saphelp_glossary/en/6d/9c44b95c168e4cb500bb430ec193cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/99/115281baba404890d2561617a78409/content.htm
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-1
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-2
PCK against framework
the PCK is used at a partner site to configure the
XI Adapter Engine. In a stand alone XI installation
you will configure adapters in the integration directory.
On a partner site you do not have a integration directory
(only the adapter engine is installed there) so you need
another tool to do the job. That's the PCK. Therefore
you can't see any difference between the integration
directory and the PCK, both do essentially the same job.
Thanks
Vikranth
Edited by: Khimavath Vikranth on May 28, 2008 9:46 PM
Maybe you are looking for
-
Upgrading Early 2009 Mac Pro to Yosemite
I need an upgrading for dummies tutorial I want to upgrade some applications that I use and can not do that with Mountain Lion which is currently on my Early 2009 Mac Pro. (Processor 2.66 GHz Quad-Core Intel Xeon - Memory 12 GB - Graphics NVIDIA Ge
-
Trouble opening documents in client application. Credentials not being passed through.
I have 2 different farms with the same problem which recently popped up. All files either open as read only (Office Documents) or users get an access denied error (PDF Files). Users are able to download the file, make changes and then upload it again
-
How to input hindi language in oracle forms 9i
Hi All, I have a requirement that forms input as well as all labels should be in Hindi language.I am able to do the same for ARABIC language but Its not working for Hindi. It showing ????? character while trying to input. Please suggest me for the sa
-
I don't know what to do next. I'm running Mac OS 10.9 Any suggestions? Thanks,
-
Gray Screen w/o Pinwheel and a dead optical drive-what to do?
This is a G4 iMac 700Mhz Flat-panel Running OS 10.4.9. The internal optical drive long ago gave up the ghost. I have been using an external LaCie optical drive which is firewire. The gray screen of death arrived this AM after software update the prev