Where is mfg date in iphone4?

where is mfg date in iphone4?
or how can i check mfg date in handset only

Purchase Date and Date Added are by no means the same thing.  If you are building an iTunes library on a new computer, or remove and then re-add songs (eg edownload songs from Music Match), they will no longer have the original add date.

Similar Messages

  • A/R Invoice PLD - Expiry Date, Mfg Date, Batch No.

    Hi,
    We are using SAP 2007A.
    We have customized the Print Layout. for the Delivery and A/R Invoice documents.  In both docs, we have used system variables for batch, exp date & mfg date.
    When we create an invoice directly (i.e. without a base document), then print it, we are able to get the batch, exp and mfg date perfectly.
    However, when we create the Invoice from the base document i.e. Delivery, and then try to print it, we are unable to print the batch, exp & mfg. When we print the Delivery, it prints the batch, exp & mfg just fine.
    We need to be able to create a/r invoice from delivery & print the batch, exp & mfg on the Invoice.
    Please advise.
    Thanks.

    Hi Afzal,
    Gordon is very much right,
    Atually PLD is very basic tool , one time its ilnk with only one marketing document either delivery, invoice or sales order etc.
    when someone prints invoice , PLD related to invoice will ativate so data fron Delivery is no where in any case as when u copy the invoice from delivery the  concern data is copied fron delivery (odln,dln1.....)tables to oinv,inv1....... tables from which pld took the  data , so u can use UDF and apply formateed search on invoice to fill the batch no or all other field u want , u an also take help of sdk as on making of invoice from delivery the specified data should copied.
    You an use crystal report and geet all data as u want .
    rgds,
    Premraj

  • How do I figure where is the data in a materialized view coming from

    Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
    TIA
    Ravi

    SQL>  select * from dict where table_name like 'ALL%MVIEW%'
    TABLE_NAME                     COMMENTS                                                             
    ALL_BASE_TABLE_MVIEWS          All materialized views with log(s) in the database that the user can s
                                   ee                                                                   
    ALL_MVIEWS                     All materialized views in the database                               
    ALL_MVIEW_AGGREGATES           Description of the materialized view aggregates accessible to the user
    ALL_MVIEW_ANALYSIS             Description of the materialized views accessible to the user         
    ALL_MVIEW_COMMENTS             Comments on materialized views accessible to the user                
    ALL_MVIEW_DETAIL_PARTITION     Freshness information of all PCT materialized views in the database  
    ALL_MVIEW_DETAIL_RELATIONS     Description of the materialized view detail tables accessible to the u
                                   ser                                                                  
    ALL_MVIEW_DETAIL_SUBPARTITION  Freshness information of all PCT materialized views in the database  
    ALL_MVIEW_JOINS                Description of a join between two columns in the                     
                                   WHERE clause of a materialized view accessible to the user           
    ALL_MVIEW_KEYS                 Description of the columns that appear in the GROUP BY               
                                   list of a materialized view accessible to the user                   
    ALL_MVIEW_LOGS                 All materialized view logs in the database that the user can see     
    ALL_MVIEW_REFRESH_TIMES        Materialized views and their last refresh times  for each master table
                                    that the user can look at                                           
    ALL_REGISTERED_MVIEWS          Remote materialized views of local tables that the user can see      
    13 rows selected.

  • Discoverer reports shows 'NULL' in columns where is no data

    Hi All,
    Discoverer report is showing NULL in columns where is no data.
    please advise ASAP.
    E-biz: 12.0.6
    Database: 11.2.0.2
    Discoverer: 10.1.2.55.26
    Thanks in advance.
    Regards
    Kumar

    In Discoverer BI DEsktop By default, it uses “NULL” text, but we can show Zero or blank then that report is executed as text report.
    how can we set it as for all reports as default blank or zero.Have you reviewed the docs referenced above?
    Please see these docs.
    Discoverer 10.1.2/11g Worksheets Do Not Display Expected Null Format Setting After Modifying Tools Options [ID 311841.1]
    Workbooks Show Wrong Null Format in Viewer/Plus After New Install or Upgrade from 4i to 10.1.2 [ID 352194.1]
    Thanks,
    Hussein

  • Table where the Delivery date is stored in Confirmation tab on Me23n

    Hello ABAB Gurus,
                               Can anyone give me the table name where the Delivery date is stored in Confirmation tab in Item in ME23n.
                                  If anyone is aware of it then please let me know .
    Sagar

    Hi,
    Check the table EKES and field name is EINDT..
    Thanks,
    Naren

  • My old Macbook Pro (10.4) died and I need to locate from the HDD where Netscape mail data resides so I can import it onto my new laptop, any ideas where it is located? I have tried home/library/mail.

    My old Macbook Pro (10.4) died and I need to locate from the HDD where Netscape mail data resides so I can import it onto my new laptop, any ideas where it is located? I have tried home/library/mail.

    Might be in /Home/Library/Netscape/ or in /Home/Library/Applications Support/ folder.

  • Where is the data saved in the srtucture for a particular tcode

    Where is the data saved in the srtucture for a particular tcode.
    For eg in MM01 there is a field with RMMG1
    where dioes the data get saved from this field as in backend it shows the stucture and the structure can hold data only at runtime,
    Please help me
    Thanks in advance
    chinnu

    Hi,
    The strcuture : RMMG1 holds data at run time only that to it can hold only one record at a time.
    so we use this structure to hold data at run time and then we insert those values into database tables for that program.
    Here you can the values stored and processed in the program in the tables : MARA (for matnr ,mbrsh,mtart..),MARC (for Plant ),MARD( for storage location : lgort )...etc.
    so if you want to fecth some data means first you have to choose right table to fetch information by passing values in the selection screen.
    Regds
    Sivaparvathi
    Please reward points if helpful...

  • Does anyone know where the iWeb data files are located or what they are called?  I can't find them.  I looked in Finder for files named the same as my website, but found nothing.  Any help would be appreciated.

    Does anyone know where the iWeb data files are located or what they are called?  I can't find them.  I looked in Finder for files named the same as my website, but found nothing.  Any help would be appreciated.

    If you erased or replaced your hard drive since iWeb was cancelled, then they are gone. Otherwise, if you have maintained backups then check those.
    Usually such files are in the /Home/Library/ folder or a sub-folder.
    Exposing the /Home/Library/ Folder
    Pick one of the following methods:
    A. This method will make the folder visible permanently. Open the Terminal application in your Utilities folder and paste the following at the command prompt:
    chflags nohidden ~/Library
    Press RETURN.
    B. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
    C. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
    ~/Library
    Press the Go button.

  • HT4796 after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?

    after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?

    Welcome to the Apple Support Communities
    By default, Migration Assistant creates a new user account where it puts all the transferred data. Just go to  > Log Out, and log in the new user that Migration Assistant has created, so you will be able to access to the transferred data.
    If you want to merge the data into the first user account, use the Shared folder (it's in /Users/Shared) to put the transferred files there, and then, on the first user, go to the Shared folder and put all the data in the folders you want

  • Where condition on date column using OleDb Command?

    Hi,
    How to read date column from excel sheet usign OleDb command. Below code failing .
    OleDbCommand cmd = new OleDbCommand("SELECT Column1 FROM [sheet1$] WHERE createdDate < ="+Convert.ToDateTime("3/24/2015")+" ", connection);
    OleDbDataReader dr = cmd.ExecuteReader();
    Syntax error (missing operator) in query expression 'LastRun < =3/24/2015 12:00:00 AM'.
    How to write a where condition on date column excel sheet?
    Thanks
    PS.Shakeer Hussain

    Hi PS.Shakeer Hussain,
    In Excel, we store these data in excel is string type.  Based on your code, it is dataTime type. So if fails when compare with dataTime and string.
    Please try the following code, Useing DateTime.ToOADate Method to convert to the equivalent OLE Automation date. It works fine on my side.
    OleDbDataAdapter dbAdapter = new OleDbDataAdapter("select * from [Sheet1$] WHERE createdDate < "+DateTime.Parse("3/29/2015").ToOADate(), connExcel);
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Where is the data held in Max 3.0

    Hi,
    Not sure if this right place to post this but as MAX 3.0 was installed with labVIEW 7.0.....here goes..
    With Max 2.0, the data assoicated for GPIB, VISA and IVI was held in two places, IVI.INI and VISACONF.INI.
    Now Max 3.0 arrives, so where has the data gone. There still is an ivi.ini but it doesn't contain all the data. Visaconf.ini still seeems to be the same.
    I can still see most of the settings for drivers, logical names etc when I launch MAX 3.0, that used to be in my old ivi.ini file. So where does it store them now.
    Also, what has happened to the default settings that used to be defined for a logical name?
    Looking, in the MAX folder there are a load of LV VI's in the MAX\Assistants\LVCGen, what are these used for
    I have looked, at the Max help but its a bit vague.
    Can anyone shed some light.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

    Hello Ray,
    With installation of LabVIEW 7.0, you have also installed MAX 3.0 and IVI Compliance Package 2.0. The IVI Compliance Package (ICP) 2.0 is a software package that contains IVI class drivers and the support libraries necessary for the development and use of applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation.
    One of the most prominent changes between previous IVI products and the IVI Compliance Package is the way that the IVI Engine, IVI MAX configuration utility, and other IVI products included in the IVI Compliance Package access and store configuration information. The Configuration Server provides
    a database for storing configuration data and an API for accessing this data.
    This database is called the Master Configuration Store. Various IVI products have been redesigned to work with the Configuration Server instead of the previous method, which involved using the ivi.ini file.
    If you have any configuration information stored in the ivi.ini file, the installer converts the existing ivi.ini data into a new format that is used by the Configuration Server and stored in the Master Configuration Store file (IviConfigurationStore.xml). This conversion process, which takes place when you install the IVI Compliance Package, removes the converted items from the original ivi.ini file as it places them in the Master Configuration Store database.
    The installer also creates a backup copy of the ivi.ini in the same directory as the original ivi.ini.
    If, after you install the IVI Compliance Package, you run an older specific instrument driver installer that adds entries to the ivi.ini file, you can convert the newly installed configuration data by running MAX, which monitors the ivi.ini file for changes. If MAX detects any changes, it launches a conversion utility automatically before loading the configuration from the Master Configuration Store file. Also, you can run the converter utility manually by selecting Start�Programs�IVI�Tools�INI to XML Converter.
    There are a few KnowledgeBase entries on ni.com on this topic:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/b83c7bbd43fd855486256cd10077ef06?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/72f3656387deaefa86256d180062862c?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/33b3f3ea0f305a3386256d170064f02d?OpenDocument
    You can also find more information in the ICP Release Notes.
    I hope this helps.
    Regards,
    Vesna Jadric
    Instrument Drivers/IVI

  • How and where does Delivery Date get calculated in ME51N

    Hi,
    Can anyone please let me know the point where the delivery date is calculated in ME51N ?
    i enter the Material and Plant and press enter and Delivery Date ( = Current Date ) gets populated automatically. I need to find out where it happens.
    Because there is a requirement that the Delivery Date should be equal to the Current Date + some Lead Time, instead of the current Date. So, I need to find a BADI or exit.
    For the transaction ME51N, there is only one Customer Exit - MEREQ001. And if I put a break-point at the compnents of this exit, the control doesnt go to these exits when I press Enter.
    And there is a BADI 'ME_REQ_POSTED', which gets triggered when we save ME51N, but it should be triggered even when we press enter.
    Please help me with all the above details.

    Hi Dagny,
    This is related to PO stuff. Probably the logic may be useful for you.
    You can try out enhancements:
    LMEKO001
    LMEKO002
    And you try out below code.
    FIELD-SYMBOLS: <beket> TYPE ANY TABLE.
    DATA: l_date        TYPE d
         l_ebelp       TYPE ebelp,
         w_beket       TYPE beket,
         t_beket       TYPE STANDARD TABLE OF beket,
         w_data        TYPE ty_data.
    * Get the item number in the correct format.
    l_ebelp = komp-kposn+1(5).
    * Get the tabe with Delivery Schedule data.
    ASSIGN ('(SAPLMEPO)ETT[]') TO <beket>.
    t_beket[] = <beket>[].
    READ TABLE t_beket INTO w_beket WITH KEY ebelp = l_ebelp.
    *l_data = w_beket-eindt.*
    Here l_data has the delivey date field you can even modify this data and update what ever u want.
    Thanks,
    Raj
    Edited by: Raja gurrala on Jul 23, 2009 3:24 PM

  • HT201364 My imac running OS 10.6.8, and want to install software that needs  OS10.7. The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac". Older upgrade better? How to proceed?

    My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
    The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
    I feel an older upgrade than Maverick might be better for my machine?
    Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
    How to proceed?

    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • From where can i get my iphone4 replaced in delhi?

    from where can i get my iphone4 replaced in delhi?

    Buy a new one.
    Warranty and support are only valid in the country of origin.

  • Where does Master Data Store?

    Hi All,
    Where does Master Data Store?
    What are limitations while deleting master data?
    <b>All the answers will be rewarded with points.</b>
    <b>Regards,
    Jackie.</b>

    Hi,
    Master Data is stored in the tables that are generated when you activate the Charachteristics...
    You can see the tables in the infoobject maintenence ...
    There are tables for Mater data Text, Attributes and hierarchy....
    e.g. /BI0/TMATERIAL is the text table. You could find it in the Master data/texts tab in infoobject maintenence.
    Secondly Deletion of master data is allowed in case the master data is not linked to any Transaction data within BW. This is because in the Infocubes the SID's would be generated that would point to the masterdata tables. Hence SAP does not allow the data to be deleted incase it exists in dependent tables.
    Hope it helps!!!!
    Regards,
    Nitin

Maybe you are looking for