Where is the batch expiration date stored?
I created a GR and received in materials of a certain batch, assigning an expiration date. When I go into MSC3N I can see the batch with the expiration date that I assigned; however when I go into the batch table (MCHA) the field VFDAT (Shelf Life Expiration or Best-Before Date) is blank. Where is this data being stored? It must be somewhere because it's pulling into the program to view batches.
Thanks.
check in table MCH1.
If data is stored in MCH1 or MCHA is dependend on your batch level.
Similar Messages
-
Where is the server configuration data stored?
Where is the server configuration data stored?
<P>
The data is stored an ASCII file named server.conf
. This file is stored in
the config directory on the same server-root as the iCS 2.0 binaries. The
format of the server.conf
file is described in detail in the Administration
Guide.Try to read
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
UME user data is stored in one or more data sources. Each type of data source has its own persistence adapter. The persistence manager consults the persistence adapters when creating, reading, writing, and searching user management data. Persistence adapters for the following types of repositories are available: 1. Database: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which databases are supported. 2. u2022 Lightweight Directory Access Protocol (LDAP) directory: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which directories are supported. 3. SAP Systems based on Web Application Server 6.20 You can configure UME to use one or more of these persistence devices in parallel. Users can also be stored in several different physical LDAP directory servers, or in different branches of the same LDAP directory server. -
Where is the administrative user data stored?
Hi I am trying to implement a simple user management application
in an weblogic server (10.3.2).
The user data is stored in an oracle database and the SQLAuthenticator is configured correctly.
Everything works fine, the user gets authenticated, created and deleted.
But when I try to log in several times with the wrong password, the server locks me out.
I know that i can unlock the user via the console but my question is:
Where is this information stored so that i can reset it using my user management aplication?
Can anyone help me or is this a big weblogic secret?
Regards
EdmundCan anyone help me or is this a big weblogic secret?
Why do u want to know it???
There are ways by which u can unlock the user programatically.. i dont think u can unlock it by modifying some files on WLS, not recommended either...
U can use the following Mbeans
weblogic.management.security.authentication.UserLockoutManagerMBean
weblogic.management.runtime.UserLockoutManagerRuntimeMBean
http://weblogic-wonders.com/weblogic/2010/07/25/userlockout-feature-of-weblogic-server/ -
Alert based on Batch Expiration Date
Scenario:
Batch Managed Items
Type: for every transaction
Goods receipt PO > Batch setup window > "Expiration date" ( activate expiration date field from form settings) > set date
Requirement:
An alert to be sent to the purchase dept. user 10 days prior to the defined "expiration date" (in the batch setup window)
vijay
Edited by: SU Vijay on Oct 6, 2008 3:42 PMUse this query
SELECT T0.[ItemCode], T0.[ItemName],T0.[BatchNum], T0.[WhsCode],
T0.[ExpDate],datediff(dd,getdate(),T0.[ExpDate]) as 'Days to Expire'
FROM OIBT T0 where datediff(dd,getdate(),T0.[ExpDate]) =10 -
Batch expiration date check when goods issue
Dear expert,
In batch expiration date check, we have a requirement that when do goods issue with delivery note we should have a expiration date check for expired batch(the system needs to give a warning message when we want to pick a expired batch(in WM) or to issue a expired batch). But I checked OMJ5 and found that there is no check for movement type 601, 641, 643 or 647. Do we have a standard function for this requirement? Thanks.
LeoHi,
In SD batch determination normally happens during Delivery creation for a Sales Order, Check for batch determination is maintained for a combination of sales org, order type - system determines Search Procedure at this level (here a check box also controls the batch check against selelction rules in case somebody puts a batch manually)
later on through selection class and sort rules batch expiry is check during determination
so all checks are applied before an actual goods issue is made so std SAP doesn't provide this check indicator at mvt type level
Hope this helps
Reg
Dheeraj -
Where is the batch description in the new Photo?
Where is the batch editing description and title we used in iPhoto? I did find how to edit description in a single image, but where is the batch? I really need it in my workflow, having to expor lots of photo's on a daily basis to external corporate systems, that sort on descriptions.
There was a post that discussed some ability to automate titles based on filenames:
Where are photo file names?
From that inspiration I wrote this little Applescript that will take all items selected, ask you for a description, and then apply it to all selected:
tell application "Photos"
activate
set imageSel to (get selection)
if imageSel is {} then
error "Please select an image."
else
set theAnswer to text returned of (display dialog "Title:" default answer "")
repeat with im in imageSel
-- set the name of im to theAnswer
set the description of im to theAnswer
end repeat
end if
end tell
you can see from the commented out line that you could do the titles (names) as batches the same way.
I haven't finished it out yet, but wanted to post it here to give you a start. I have tested it on a handful of items, so I know it at least works. You could save this as an app from within applescript editor, and then just run it after making a selection, or you could paste it into an automator action and tie it to the services menu as mentioned in the forum post above.
Photos luckily does seem to have applescript hooks for the following when dealing with a "media item" - looks like you can add/edit most of the metdadata you have access to in the GUI. I initially missed this when I looked, so was very glad to see the forum post that pointed me in the right direction.
Property
Access
Type
Description
altitude
get
real
The GPS altitude in meters.
date
get/set
date
The date of the media item
description
get/set
text
A description of the media item.
favorite
get/set
boolean
Whether the media item has been favorited.
filename
get
text
The name of the file on disk.
height
get
integer
The height of the media item in pixels.
id
get
text
The unique ID of the media item
keywords
get/set
list of text
A list of keywords to associate with a media item
location
get
list of real
The GPS latitude and longitude, in an ordered list of 2 numbers. Latitude in range -90.0 to 90.0, longitude in range -180.0 to 180.0.
name
get/set
text
The name (title) of the media item.
width
get
integer
The width of the media item in pixels. -
Where does substitution variable meta data stored?
where does substitution variable meta data stored in the essbase folder?<BR>Thanks<BR>Arun
I believe substitution variables are stored in the Essbase.sec (Security file).
-
Where is the printer configuration info stored?
I need to configure printing for a whole lab, and while I can configure an individual machine for one user via the Print/Fax option of System prefs, I can't find where all that info gets stored (some of it is in ~/Library/Preferences/com.apple.PrintingPrefs.plist, but not all) and I can't figure out how to slide that in as a whole-system configuration. Where is the per-user information stored, and where can I move it so that it applies system-wide?
The printer queues are global so most of the information is not kept under any particular user. The path you mentioned keeps user relevant information, such as Presets.
If the printers are using files that are included with 10.5, then the majority of compressed driver files are kept in ./Libary/Printers/Vendor or ./Library/Printers/PPDs/Contents/Resources/en.lproj for PostScript PPDs.
When you add a printer queue, some of the information is kept in ./etc/cups. This includes the printers.conf file which has details about the added printer queues and the decompressed PPD that was selected during the queue creation.
So if you are looking at copying the data from one Mac to reduce your setup on all the other Mac's, then you may have to tell us the make and model, as there could also be a number of additional directories/files you need.
PaHu -
I like to know the table name where all the Interface name ( Data Type and
Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM -
How can I display the password expiration date for a user
I have created a GUI (using PrimalForms) which runs powershel scripts to pull information like user ID, email address, last logon ec. for the helpdesk to help establish the validity of some user claims of "it worked yesterday" and the like.
I have been asked to add the password expiration date, but I am struggling to get the code for this addition.
Does anyone know how I can include this, and have it in a human readable format?
The current scripts (there are 3) allow the helpdesk staff to search on user ID and display name, the third provides the last logon, it was impossible to include this in the other scripts so I added an extra search button and called it good. An example of
these scripts is below (please note, PrimalForms needs a slightly different syntax in order to get the results displayed, but the core script is standard PS, I use Powershell 3.0)
$results.Text=Get-ADUser -Filter "sAMAccountName -eq '$($EntryBox.text)'" -Properties DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | select givenName, surname, DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | Out-String
$results.Focus()
for info:
$results.text is the window in the GUI results are displayed in
$entrybox.text is the text box the helpdesk staff use to input the user ID or display name of the account they are querying
$results.focus simply tells the script to put the results in the results.text window
The screenshot below shows the current setup, this is purely to put the above information into perspective. Obviously some of the information displayed has been removed/redacted along with our logo.Hi,
Here's an example you can build from:
$maxPasswordAge = 120
Get-ADUser USER -Properties PasswordLastSet |
Select SamAccountName,
PasswordLastSet,
@{N='PasswordLifeRemaining';E={$maxPasswordAge - ((Get-Date) - $_.PasswordLastSet).Days}},
@{N='PasswordExpirationDate';E={(Get-Date $_.PasswordLastSet).AddDays($maxPasswordAge)}}
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Where is the batch process command in Bridge CS6?
Where is the batch process command in Bridge CS6? I want to convert to Tiffs.
Found it. Woohoo!
-
Where does the supporting deatil is stored? in Planning or Essbase?
Where does the supporting deatil is stored? in Planning database (RDMS) or Essbase database?
Appreciate if u could reply ASAP.
Thanks in Advance!!Supporting details are stored in Planning Applications RDBMS. check out HSP_COLUMN_DETAIL and HSP_COLUMN_DETAIL_ITEM in the application relational database
Re: Refresh Database
I can see 6 question and all are unresolved, Mark the answers if you think they are correct or helped you and close the thread.
Cheers..!!
Edited by: RahulS on Jun 21, 2011 3:58 PM -
I have an iMac, where are the completed print jobs stored on the iMac and what format are they?
My OSX is 10.10.1Hi
If you are using standard system or HP drivers, than the jobs contents are not saved at all.
You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
It allows to save a job (prior or instead to printing it) as PDF or PostScript. -
HT4867 Now that I've switched to ICloud where are the mailboxes that were stored on my Mac?
Now that I've switched to ICloud where are the mailboxes that were stored on my Mac?
On your mac, mailboxes are listed under one of several categories. Some are "on my mac" and others are in "icloud". Those emails in mailboxes "on my mac" are strictly local, they do not connect with iCloud. As Julian points out, all mailboxes on your mac are still there. They will not be on your other devices.
-
Where will the portal activity data reside in SolMan?
Hi,
I have activated the portal activity data reporting feature in the portal and the portal activity extractors in SolMan. Now where will the portal activity data reside in SolMan?
Will the portal activity data be present in the SolMan BI (i.e infocubes such as 0SMD_ADCD, 0SMD_ADCH)?
thans and regards,
Divya.Hi
seems it stores ADC datafiles files in file system of portal, from there its fetching ad reporting data time to time
pleare read this guide [PADC_Activation_Guide.pdf|https://websmp110.sap-ag.de/~sapidb/012003146900000606822009E/PADC_Activation_Guide.pdf]
and check this [How PAR works?|http://help.sap.com/saphelp_nw04/helpdata/en/b5/c652070d474533a18a930112a4b926/content.htm]
Jansi
Maybe you are looking for
-
[nForce]: Trouble Shooting Guide V1.6a
Hello. Here is a guide to help solve some problems with K7N2 motherboards. Problems arise in systems because some components do not work as they should. Typical issues found with these boards consist of Non-nForce2 Approved RAM & a weak power supply.
-
Books in iBooks not being removed after syncing
Although I use iCloud, I do back up and sync music, photos, movies, and books to iTunes on my Mac. I just purchased another book on iTunes, connected to iTunes for back up and loading the new book onto the iPad. I also unchecked some books that I no
-
Issue on Business Rules in SOA
Hello I am writing a business rule as per the screen shot and in one scenario it is firing twice even though i selected 'there is a case where' option. My requirement was if pem >0 or tool name is 'PEM' then add PEM. It is firing twice in case if pem
-
Disc stuck in drive, tried every thing
This isn't a mechanical problem, I can hear the computer trying to read the disc. When I restart the computer and hold the mouse button it just tries to read the disc for hours... Even if I restart the computer and don't hold the mouse button, it jus
-
thanks