Where's the HD video camera app on 4s?
No HD Video app anywhere to be found. What's up??
What do you mean?
There are not two different cameras/apps.
The hd video is the only video.
iPhone User Guide (For iOS 5.0 Software)
Similar Messages
-
the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???
Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.
-
Camera Roll is not the same in Camera app vs Photos app ???
iPhone 4S issue...
I just got a new iPhone 4S. Restored from a 3GS backup.
I noticed yesterday that some of the photos that I took with the built-in Camera app aren't showing in the Camera Roll. Specifically, the last 3 pictures that I took plus a couple three other older ones. But it only happens when I view the Camera Roll through the Camera app. Using the Photos app I can see all the photos I've taken.
- When viewed from the Photos app, the "Albums" list says "Camera Roll (254)" and all photos show up.
- When I open the Camera app and click on the picture thumbnail in the bottom left and it opens the Camera Roll it says "248 of 248" at the top of the screen and I can't see my last three photos plus a couple more other older ones. They're not in the thumbnail index and I can't swipe to them from the individual photo display. Again, this is when viewing the Roll from the Camera app.
- I have no other Albums but "Camera Roll". None of the photos have been edited either.
I called Apple support and they instructed me to reboot my iPhone. This didn't change much except now the last "missing" photo shows up as the small thumbnail in the lower left of the Camera screen. But when I click to view the Camera Roll, it's still nowhere to be found (along with the other "missing" ones). The Photos app still shows all of them just fine.
What the heck is going on? It sounds like a bug to me... the Camera app and the Photos app should be pulling the same data, right?
Apple support suggested that I connect it to my Mac and do a Restore. Even if this works, it doesn't give me much confidence that it won't happen again as it seems like a bug. Should I report it?
Benim also having a problem on my iPhone 4 that just started today, about 100 or so photos and videos just completely disappeared.. basically it shows the last 4-5 photos that i took, and then the first 50 or so.. everything in between is gone.
when i view from the camera vs the photos app the last 4-5 differ.. so who knows *** is going on...
but if you download a program called iExplorer you can view and download everything, as all the files are still there -
Hi. Which Directive/Class will be the better choice if your app is mainly a video camera app. I saw about 3 different Classes to capture videos. I'm currently using Microsoft.Devices/CaptureDevice to capture video. It looks limited to me because found
out I can't pause==>resume a recording. And what about Zooming? Can you tell me which way I want to go if I want to make sure my camera functionality is powerful? Which directive/class and if possible some code example on how to use it and maybe how to
zoom, focus ect. Thank you very muchI'm now using AudioVideoCaptureDevice to capture video and I can do that but the app crash when I try to set the source for the capture device in InitializeVideoRecorder(). Can you take a look and tell me what I'm doing wrong?
Here's some code snippet:
// Viewfinder for capturing video.
private VideoBrush videoRecorderBrush;
// Source and device for capturing video.
private CaptureSource _cs;
private VideoCaptureDevice _cd;
private AudioVideoCaptureDevice vcDevice;
double w, h;
// File details for storing the recording.
private IsolatedStorageFileStream isoVideoFile;
private FileSink fileSink;
private string isoVideoFileName = "iClips_Video.mp4";
private StorageFile sfVideoFile;
// For managing button and application state.
private enum ButtonState { Initialized, Stopped, Ready, Recording, Playback, Paused, NoChange, CameraNotSupported };
private ButtonState currentAppState;
// Constructor
public MainPage()
try
InitializeComponent();
//setup recording
// Prepare ApplicationBar and buttons.
PhoneAppBar = (ApplicationBar)ApplicationBar;
PhoneAppBar.IsVisible = true;
StartRecording = ((ApplicationBarIconButton)ApplicationBar.Buttons[0]);
StopPlaybackRecording = ((ApplicationBarIconButton)ApplicationBar.Buttons[1]);
StartPlayback = ((ApplicationBarIconButton)ApplicationBar.Buttons[2]);
PausePlayback = ((ApplicationBarIconButton)ApplicationBar.Buttons[3]);
SetScreenResolution();
//initialize the camera task
cameraCaptureTask = new CameraCaptureTask();
cameraCaptureTask.Completed += new EventHandler<PhotoResult>(cameraCaptureTask_Completed);
if (isFilePresent("username") && isFilePresent("Password"))
if (isFilePresent("IsProfilePhotoOnServer"))
connectToSocket();
else
SignUpProfilePhoto();
else
SignIn();
catch (Exception ex)
this.Dispatcher.BeginInvoke(delegate()
MessageBox.Show("Constructor Error:\n"+ ex.Message);
protected override void OnNavigatedTo(NavigationEventArgs e)
base.OnNavigatedTo(e);
// Initialize the video recorder.
InitializeVideoRecorder();
//prepare shutter hot keys
CameraButtons.ShutterKeyHalfPressed += OnButtonHalfPress;
CameraButtons.ShutterKeyPressed += OnButtonFullPress;
CameraButtons.ShutterKeyReleased += OnButtonRelease;
protected override void OnNavigatedFrom(NavigationEventArgs e)
// Dispose of camera and media objects.
DisposeVideoPlayer();
DisposeVideoRecorder();
base.OnNavigatedFrom(e);
CameraButtons.ShutterKeyHalfPressed -= OnButtonHalfPress;
CameraButtons.ShutterKeyPressed -= OnButtonFullPress;
CameraButtons.ShutterKeyReleased -= OnButtonRelease;
protected override void OnOrientationChanged(OrientationChangedEventArgs e)
if (vcDevice != null)
if (e.Orientation == PageOrientation.LandscapeLeft)
txtDebug.Text = "LandscapeLeft";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 90 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.PortraitUp)
txtDebug.Text = "PortraitUp";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 90 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 0;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 0;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.LandscapeRight)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "LandscapeRight";
// Rotate for LandscapeRight orientation.
//videoRecorderBrush.RelativeTransform =
//new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 180 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = -90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate MyGrid
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = -90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.PortraitDown)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "PortraitDown";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 270 };
// Hardware shutter button Hot-Actions.
private void OnButtonHalfPress(object sender, EventArgs e)
//toggle between video- play and pause
try
this.Dispatcher.BeginInvoke(delegate()
if (StartPlayback.IsEnabled)
PlayVideo();
if (PausePlayback.IsEnabled)
PauseVideo();
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
private void OnButtonFullPress(object sender, EventArgs e)
// Focus when a capture is not in progress.
try
this.Dispatcher.BeginInvoke(delegate()
if (vcDevice != null)
//stopVideoPlayer if it's playing back
if (currentAppState == ButtonState.Playback || currentAppState == ButtonState.Paused)
DisposeVideoPlayer();
StartVideoPreview();
if (StartRecording.IsEnabled)
StartVideoRecording();
else
StopVideoRecording();
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
private void OnButtonRelease(object sender, EventArgs e)
try
this.Dispatcher.BeginInvoke(delegate()
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Update the buttons and text on the UI thread based on app state.
private void UpdateUI(ButtonState currentButtonState, string statusMessage)
// Run code on the UI thread.
Dispatcher.BeginInvoke(delegate
switch (currentButtonState)
// When the camera is not supported by the phone.
case ButtonState.CameraNotSupported:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// First launch of the application, so no video is available.
case ButtonState.Initialized:
StartRecording.IsEnabled = true;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// Ready to record, so video is available for viewing.
case ButtonState.Ready:
StartRecording.IsEnabled = true;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = true;
PausePlayback.IsEnabled = false;
break;
// Video recording is in progress.
case ButtonState.Recording:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// Video playback is in progress.
case ButtonState.Playback:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = true;
break;
// Video playback has been paused.
case ButtonState.Paused:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = true;
PausePlayback.IsEnabled = false;
break;
default:
break;
// Display a message.
txtDebug.Text = statusMessage;
// Note the current application state.
currentAppState = currentButtonState;
public async void InitializeVideoRecorder()
try
if (_cs == null)
_cs = new CaptureSource();
fileSink = new FileSink();
_cd = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
CameraSensorLocation location = CameraSensorLocation.Back;
var captureResolutions =
AudioVideoCaptureDevice.GetAvailableCaptureResolutions(location);
vcDevice = await AudioVideoCaptureDevice.OpenAsync(location, captureResolutions[0]);
vcDevice.RecordingFailed += OnCaptureFailed;
vcDevice.VideoEncodingFormat = CameraCaptureVideoFormat.H264;
vcDevice.AudioEncodingFormat = CameraCaptureAudioFormat.Aac;
// Initialize the camera if it exists on the phone.
if (vcDevice != null)
//initialize fileSink
await InitializeFileSink();
// Create the VideoBrush for the viewfinder.
videoRecorderBrush = new VideoBrush();
videoRecorderBrush.SetSource(_cs);
// Display the viewfinder image on the rectangle.
viewfinderRectangle.Fill = videoRecorderBrush;
_cs.Start();
// Set the button state and the message.
UpdateUI(ButtonState.Initialized, "Tap record to start recording...");
else
// Disable buttons when the camera is not supported by the phone.
UpdateUI(ButtonState.CameraNotSupported, "A camera is not supported on this phone.");
catch(Exception ex)
MessageBox.Show("InitializeVideoRecorder Error:\n" + ex.Message);
public async Task InitializeFileSink()
StorageFolder isoStore = ApplicationData.Current.LocalFolder;
sfVideoFile = await isoStore.CreateFileAsync(
isoVideoFileName,
CreationCollisionOption.ReplaceExisting);
private void OnCaptureFailed(AudioVideoCaptureDevice sender, CaptureFailedEventArgs args)
MessageBox.Show(args.ToString());
private void OnCaptureSourceFailed(object sender, ExceptionRoutedEventArgs e)
MessageBox.Show(e.ErrorException.Message.ToString());
// Set the recording state: display the video on the viewfinder.
private void StartVideoPreview()
try
// Display the video on the viewfinder.
if (_cs.VideoCaptureDevice != null
&& _cs.State == CaptureState.Stopped)
// Add captureSource to videoBrush.
videoRecorderBrush.SetSource(_cs);
// Add videoBrush to the visual tree.
viewfinderRectangle.Fill = videoRecorderBrush;
_cs.Start();
// Set the button states and the message.
UpdateUI(ButtonState.Ready, "Ready to record.");
//Create optional Resolutions
// If preview fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Set recording state: start recording.
private void StartVideoRecording()
try
// Connect fileSink to captureSource.
if (_cs.VideoCaptureDevice != null
&& _cs.State == CaptureState.Started)
_cs.Stop();
// Connect the input and output of fileSink.
fileSink.CaptureSource = _cs;
fileSink.IsolatedStorageFileName = isoVideoFileName;
// Begin recording.
if (_cs.VideoCaptureDevice != null
&& _cs.State == CaptureState.Stopped)
_cs.Start();
// Set the button states and the message.
UpdateUI(ButtonState.Recording, "Recording...");
StartTimer();
// If recording fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Set the recording state: stop recording.
private void StopVideoRecording()
try
// Stop recording.
if (_cs.VideoCaptureDevice != null
&& _cs.State == CaptureState.Started)
_cs.Stop();
// Disconnect fileSink.
fileSink.CaptureSource = null;
fileSink.IsolatedStorageFileName = null;
// Set the button states and the message.
UpdateUI(ButtonState.Stopped, "Preparing viewfinder...");
StopTimer();
StartVideoPreview();
// If stop fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Start the video recording.
private void StartRecording_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StartRecording.IsEnabled = false;
StartVideoRecording();
private void DisposeVideoRecorder()
if (_cs != null)
// Stop captureSource if it is running.
if (_cs.VideoCaptureDevice != null
&& _cs.State == CaptureState.Started)
_cs.Stop();
// Remove the event handler for captureSource.
_cs.CaptureFailed -= OnCaptureFailed;
// Remove the video recording objects.
_cs = null;
vcDevice = null;
fileSink = null;
videoRecorderBrush = null;
Thanks in advance. -
I can't take a video in camera mode. I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?
Swipe up or down to select options.
-
The 'Swipe to Camera app icon' function is not working. I swipe across but the camera app doesn't start up at all. Does anyone else have this problem? Can it be fixed?
You don't swipe but actually press, hold and push up.
-
I just installed iOS 7.1 - where is the iTunes Internet radio app?
I just installed iOS 7.1 - where is the iTunes Internet radio app?
There is no separate app. It's included in the 'Music' app if Radio is available in your country (only US and Australia at this moment).
If it is available in your country then open the Music app and select the Radio tab as described on the Apple website. If it is available in your country but don't seem Radio in the Music app then do this. -
THE BEST VIDEO CAMERA...??? ..^_^..
..
..HEY GUYS..
I'm thinking to buy a video camera for using with IMOVE-08 very soon..but I was wondering which one could be the best .. there are so many brands out there that i can not chose one..!!
Does anybody know which one could be the best VIDEO CAMERA..? I don't care about money and I'm looking for something good that I don't want to change for a long time..!!
If you have any ideas please let me know...
se-ya,,andrea..I did a lot of research on the issue, which you can read about here:
http://www.kbeat.com/Site/Blog/Entries/2007/9/10New_camcorder%2C_HD_atlast!.html
After much consideration, I went with the Canon HV20, and I've been very happy with the results. I use it on a recent MacBook Pro, and have not had a single issue. You can read a great comparison article featuring the Panasonic Steve Jobs mentioned, the Canon, the JVC, and a Sony:
http://www.camcorderinfo.com/content/The-Great-HD-Shoot-Out---Canon-HV20-Sony-HD R-HC7-Panasonic-HDC-SD1-JVC-GZ-HD7.htm
Good luck. I don't think you can go wrong with any of the cameras they reviewed, but the Canon has the best image, which was my number one priority. -
when using the Cyclops speed camera app the sound on my iPhone 4s switches off after a short while. If I close the app and reopen it, there's still no sound. If I restar the phone and open Cyclops I get sound "welcome to Cyclops" or whatever the greeting is. Has anyone got any ideas?
I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this. -
Zoom app for the iphone video cam?
would it be possible to add zoom to the video cam using a 3rd party application?
There are apps in the AppStore that do this for still pictures, but its a digital zoom meaning all it does it zoom/crop the image.
The only way to zoom the video is to move closer to the subject.
A proper zoom is a hardware feature, not software. -
Where did the Home Video tab go?
I have a MacBook Pro (15-inch, Mid 2009) running Yosemite 10.10.2 and iTunes 12.1.50. I also have about 900+ home videos taken by my various cameras and encoded using HandBrake or iMovie over the last 10 years. 30 of these movies have been on my phone for over a year and I regularly watch them.
I updated my iPhone 4 to iOS8.2 last night by doing a restore as if a new device. This was recommended by a tech at the Apple Store since so much of my phone's 16GB was taken up by the operating system. After that, I suddenly had more than 3GB more free space. Yay!
But - right away, I noticed that only 3 of my 30 home videos had synched. I had those 30 in a special playlist so I wouldn't have to sort through the other 870+. I decided to remove them from the iPhone and try again, but it didn't work. So, I decided to remove them from the playlist and add them again. That's when I noticed that I cannot find the Home Videos tab in iTunes on my Mac anymore. It was there earlier last night because I had just added new ones to iTunes (visual confirmed they were in the Home Video tab once added to library). I tried to import all 900+ home movies, and it seemed to do something - but I still can't see them.
I tried to search for "Home Video" in the iTunes help menu - no hits. I always use "Home Movies Favourites" as the Genre for the 30 I put on my phone, so I tried searching for that in the movie search box. Nothing found again. I tried searching for individual file names. Nothing.
So - where did Home Videos go and how can I get it back? My files are still on the hard drive, but I have spent hundreds of hours updating the tags in iTunes with irreplaceable info like dates, locations, memories, etc.
Apple - please stop making such drastic changes to iTunes every time we just finish getting used to your other changes!Hello! I said... I want the ability to input analogue video into my camcorder so I can continue to transfer VHS and input and record video from other sources. The new HD cameras on the market will not allow you to record video from any source except for the lens.
I have HD cable box. I want to record my HD programs from cable (HBO, Starz, etc) to my camera, download the video to my Mac from the camera and then edit them in iMovie and create professional looking movie DVD's in iMovie.
iMovie HD can work with mini DV HD cameras and HD video. I was not aware of a system requirement for working with HD content. -
Since getting my iPhone 4s, I've been messing around with some of the new features the phone offers. Since Apple claims the new phone shoots 1080P HD video, I wanted to test it out for kicks. The result did NOT look like HD video to me. Is there some setting I need to set up for it to shoot in HD?
What do you mean?
There are not two different cameras/apps.
The hd video is the only video.
iPhone User Guide (For iOS 5.0 Software) -
The famous Pudding Camera App doesn't work on my iPod Touch with iOS 4!!!!
This is the famous Pudding Camera, http://itunes.apple.com/sg/app/id379411152?mt=8
it downloads and installs smoothly, but then when i touch the app, it opens and then disappears and goes back to the home page...
I've downloaded and reinstalled 10x, i've switched the ipod touch on, off, and reinstalled but nothing worked so far..
very upset and desperate now.. pls help..
Message was edited by: CantYouCyup just tried.... and no it still doesn't work...
weird that when i check with my friends, they all say it works on their iPhone 4... just not my ipod Touch... !@#$%
and when i check forums for the past few days.. i don't see anyone complaining that this app doesn't work... and alot of reviews saying that it works on iPhone, ipod Touch, and iPad if i didn't recall wrongly...
this is terribly frustrating!! -
Where are the Auidio/ Video Settings
Capture tells me to adjust the Audio/Video settings. Where are these settings and what do I set them to.
John,
Set the Easy Setup to AVCHD 1920x1080i 50 or 60 for PAL or NTSC respectively.
Save a Project with these settings assuming your footage is AVCHD.
File>Log and Transfer over USB should do the job.
Al -
I need help on finding the right video camera
I am a high school student and I make short films. I use final cut express. I'm getting ready to do a short film for a film festival. I really want a new video camera but i don't know what to get. The price range is under 2000. If anyone knows what would be the best i would really appreciate the input.
ThanksAt the moment i have been using a Sony GC1 for small stuff but other videos i use a panasonic, im not sure of the name i don't have it with me.
The quality is really bad on the sony mainly because its just a net sharing cam and the panasonic is not mine so i dont have full access.
I really want something with good quality, 24p, can work with my macbook, just an overall good camera that will endure a lot of use.
Maybe you are looking for
-
An upgrade was sent to my Samsung Galaxy S5 phone on 3/27/15 and it ruined my phone. I no longer have the ability to Wi-Fi. When I swipe the phone on there is a clicking sound and the scree goes directly to my keypad. I want the phone to go to my
-
ill connect my itouch to my computer via usb port and it will begin to charge but it will not show up in "my computer" please help
-
Strange behavior of brush in Photoshop 10.0.1 CS3 Extended
I've all of a sudden encountered a problem with the brushes in Photoshop CS3. When I want to paint with a brush I click the mouse to start laying down paint, but all I get is a spot at that point, nothing happens as I drag the mouse until I release t
-
I have an apple tv. I have encountered toooo many problems with it. I feel like throwing it out the window, seriously. Right now, I cant see it in my TV. ATV is connected via HDMI to an ONKYO TX-SR606 which is connected to TV via another HDMI cable.
-
Hi Guys. I recently went to Singapor for work, and i bought the new iPhone 5s unblocked. The lady told me i would be able to use 3g, 4g and Lte in Europe, and since i need to travel a lot, i decided to bought the iPhone. I started using my iPhone tod