Where to build blog, based on these parameters

It's been a long journey with lots of reading and experimenting.
The setting: I build my site in iWeb, Publish to Folder, add tags in iWeb SEO Tool, and FTP to GoDaddy.
SEO is very important to me, though I haven't implemented everything on my to-do list yet.
For me, starting a blog is mostly about SEO, and driving potential clients to my GoDaddy-hosted website, which is here: http://www.keithraygor.com
I started with a blog in iWeb and was swayed away by reports of sluggish behavior and lack of certain features.
Notes on iWeb blog:
I loved the design and the process.
Comments and search are not important to me.
Posting from a browser is not important to me, as most posts will be planned out, and I won't be needing to do it while away. (If if I really do need to post from the road, I'd bring a flash drive with the domain on it).
I've become adept at FTP'ing only updated pages, and can continue to do this with blog posts if needed.
I'm not afraid of losing everything, as I backup daily to several locations.
Is the sluggish behavior noted by others only if the blog is hosted on MobileMe? If so, then maybe continuing to build the blog in iWeb will allow me SEO benefits, especially that of having the content directly attached to my website. If sluggish behavior is because of iWeb code, then I can see where I'd have problems.
Because of the posts about iWeb's blog, and based on recommendations, I started a blog on Wordpress yesterday, which is here: http://magickeith.wordpress.com/
I got it to look somewhat similar to my iWeb blog, and am happy with the results.
Only AFTER I finished, did a friend inform me that Wordpress.COM will probably not help my SEO efforts due to it not being attached to my website, and sending prospective clients away from my site. Even if I form my own navigation buttons, I would have those problems. So at this point, I'm rather frustrated because of the many hours of trial and error it took to build the blog and to learn a new structure (Wordpress), and spending $59 to get my video onto Wordpress.
My friend suggested Wordpress.ORG, and I understand the difference, and that I can have it integrated and hosted as part of my site on GoDaddy, but the problem is I have neither the time nor the inclination to understand the heady process involved. I know nothing of HTML, CSS, php, SLQ, datebases, etc. I see the advantages, I'm just burnt on the process already, and just can't see myself jumping into a third attempt at building a blog while tackling new languages.
I've also tried Karelia's Sandvox, and am almost tempted to go their Pro route due to their incorporated SEO, but to be honest, I just don't like any of their templates - and I don't think I'd be able to create the look I have already on my website, with their software.
Based on the importance of SEO to my efforts, is my best bet just going back to iWeb, and using their blog page to get the content onto my site and out to people?
Is there a solution that I'm not thinking of?
I appreciate any guidance. Thanks for taking the time to read through this lengthy post.
Keith

The iWeb blog is not suitable for serious blogging as it rapidly grows into a huge, sluggish mess.
If you publish it to a commercial server you will lose the comments feature.
Wordpress is used successfully for many commercial blogs and I can't see why you would have any problems with SEO.
As you have realized, the link to the blog would be an external one incorporated in a custom navigation menu. As such, the blog and its pages would be included in the sitemap and would be accessed by the search engine spiders.
The website, iWebforMusicians, is built on nine different domain files and each section is accessed from the main menu through external hyperlinks. The sitemap is created with Rage Sitemap Automator and all the pages are indexed.
The iWeb templates such as blog, podcast, photos and albums tend to hamper SEO. To make iWeb work in a commercial environment, you have to go out of the box a bit and you are on the right track by using an alternative blog. Wordpress is a viable alternative to iWeb for website creation that not many seem to consider. I would be more inclined to use it rather than Sandvox and others for the whole website.
Your Wordpress blog, in my opinion, looks and performs a lot better than the iWeb ones I have struggled through.

Similar Messages

Is it possible to use a case statement when joining different tables based on input parameters?

Hi,
I have a scenario where my stored procedure takes 5 parameters and the users can pass NULL or some value to these parameters and based on the parameters, I need to pull data from various tables.
Is it possible to use a case statement in the join, similar the one in the below example. I'm getting error when I use the below type of statement.
select a.*
from a
case
when parameter1=1 then
inner join a on a.id = b.id
when parameter1=2 then
inner join a on a.id = c.id
end;
Please let me know, if this type of statement works, and if it works will it create any performance issues?. If the above doesn't work, could you please give me some alternate solutions?
Thanks.

Here's a technique for joining A to B or C depending on the input parameters. In theory, you are joining to both tables but the execution plan includes filters to skip whichever join is not appropriate. The drawback is that you have to do outer joins, not inner ones.
CREATE TABLE A AS SELECT LEVEL ak FROM dual CONNECT BY LEVEL <= 100;
CREATE TABLE b AS SELECT ak, bk
FROM A, (SELECT LEVEL bk FROM dual CONNECT BY LEVEL <= 10);
CREATE TABLE c(ak, ck) AS SELECT ak, bk*10 FROM b;
variable p1 NUMBER;
variable p2 NUMBER;
exec :p1 := 1;
exec :p2 := 20;
SELECT /*+ gather_plan_statistics */ A.ak, nvl(b.bk, c.ck) otherk FROM A
LEFT JOIN b ON A.ak = b.ak AND :p1 IS NOT NULL AND b.bk = :p1
LEFT JOIN c ON A.ak = c.ak AND :p1 is null and :p2 IS NOT NULL and c.ck = :p2
WHERE A.ak <= 9;
SELECT * FROM TABLE(dbms_xplan.display_cursor(NULL,NULL,'IOSTATS LAST'));
| Id | Operation             | Name            | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   0 | SELECT STATEMENT      |                 |      1 |        |      9 |00:00:00.01 |       7 |
|* 1 | HASH JOIN OUTER      |                 |      1 |      9 |      9 |00:00:00.01 |       7 |
|* 2 |   HASH JOIN OUTER     |                 |      1 |      9 |      9 |00:00:00.01 |       7 |
|* 3 |    TABLE ACCESS FULL | A               |      1 |      9 |      9 |00:00:00.01 |       3 |
|   4 |    VIEW               | VW_DCL_5532A50F |      1 |      9 |      9 |00:00:00.01 |       4 |
|* 5 |     FILTER            |                 |      1 |        |      9 |00:00:00.01 |       4 |
|* 6 |      TABLE ACCESS FULL| B               |      1 |      9 |      9 |00:00:00.01 |       4 |
|   7 |   VIEW                | VW_DCL_5532A50F |      1 |      9 |      0 |00:00:00.01 |       0 |
|* 8 |    FILTER             |                 |      1 |        |      0 |00:00:00.01 |       0 |
|* 9 |     TABLE ACCESS FULL | C               |      0 |      9 |      0 |00:00:00.01 |       0 |
Predicate Information (identified by operation id):
   1 - access("A"."AK"="ITEM_0")
   2 - access("A"."AK"="ITEM_1")
   3 - filter("A"."AK"<=9)
5 - filter(:P1 IS NOT NULL)
   6 - filter(("B"."AK"<=9 AND "B"."BK"=:P1))
   8 - filter((:P2 IS NOT NULL AND :P1 IS NULL))
   9 - filter(("C"."AK"<=9 AND "C"."CK"=:P2))
You can see that table C was not really accessed: the buffer count is 0.
exec :p1 := NULL;
SELECT /*+ gather_plan_statistics */ A.ak, nvl(b.bk, c.ck) otherk FROM A
LEFT JOIN b ON A.ak = b.ak AND :p1 IS NOT NULL AND b.bk = :p1
LEFT JOIN c ON A.ak = c.ak AND :p1 is null and :p2 IS NOT NULL and c.ck = :p2
WHERE A.ak <= 9;
SELECT * FROM TABLE(dbms_xplan.display_cursor(NULL,NULL,'IOSTATS LAST'));
Now table B is not accessed.
| Id | Operation             | Name            | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads |
|   0 | SELECT STATEMENT      |                 |      1 |        |      9 |00:00:00.02 |       7 |      2 |
|* 1 | HASH JOIN OUTER      |                 |      1 |      9 |      9 |00:00:00.02 |       7 |      2 |
|* 2 |   HASH JOIN OUTER     |                 |      1 |      9 |      9 |00:00:00.01 |       3 |      0 |
|* 3 |    TABLE ACCESS FULL | A               |      1 |      9 |      9 |00:00:00.01 |       3 |      0 |
|   4 |    VIEW               | VW_DCL_5532A50F |      1 |      9 |      0 |00:00:00.01 |       0 |      0 |
|* 5 |     FILTER            |                 |      1 |        |      0 |00:00:00.01 |       0 |      0 |
|* 6 |      TABLE ACCESS FULL| B               |      0 |      9 |      0 |00:00:00.01 |       0 |      0 |
|   7 |   VIEW                | VW_DCL_5532A50F |      1 |      9 |      9 |00:00:00.01 |       4 |      2 |
|* 8 |    FILTER             |                 |      1 |        |      9 |00:00:00.01 |       4 |      2 |
|* 9 |     TABLE ACCESS FULL | C               |      1 |      9 |      9 |00:00:00.01 |       4 |      2 |

Weren't these parameters deprecated in 11g ?

Version : 11.2.0.3
Platform : RHEL 5.8
All our 11.2 DBs (RAC & Single Instance) still seems to have background_dump_dest, core_dump_dest and user_dump_dest parameters set.
I was under the impression that these parameters were replaced by diagnostic_dest. We have diagnostic_dest set too.
These DBs are created as per the standard build ie. Created according to the instructions by our engineering team which apparently are bight guys.
Is this expected behaviour?
SQL> select * From v$version where rownum < 3;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
SQL> show parameter background_dump_dest
NAME                                 TYPE        VALUE
background_dump_dest                 string      /u01/app/oracle/global/diag/rdbms/SMFC/SMFC3/trace
SQL>
SQL>
SQL> show parameter core_dump_dest
NAME                                 TYPE        VALUE
core_dump_dest                       string      /u01/app/oracle/global/admin/SMFC/cdump
SQL>
SQL> show parameter diagnostic_dest
NAME                                 TYPE        VALUE
diagnostic_dest                      string      /u01/app/oracle/global
BTW.Where is the preview button which we had in our earlier Forum interface ?

The diagnostic_dest parameter specifies the base for the directory structure that contains all diagnostic files, and that structure cannot be changed. For example, the location for the alert log is $DIAGNOSTIC_DEST/rdbms/<database_name>/<instance_name>/trace, which is where the background_dump_Dest is set to. You can set it to something else, and you will a little stub alert log that says, in effect, "I'm not using this":
c:\tmp\bdd>cat alert_orcl112.log
Dump file c:\tmp\bdd\alert_orcl112.log
Tue Jun 11 08:43:58 2013
ORACLE V11.2.0.3.0 - 64bit Production vsnsta=0
vsnsql=16 vsnxtr=3
Windows NT Version V6.2
CPU                 : 4 - type 8664, 2 Physical Cores
Process Affinity    : 0x0x0000000000000000
Memory (Avail/Total): Ph:5489M/8071M, Ph+PgF:6009M/9287M
Tue Jun 11 08:43:58 2013
WARNING: The background_dump_dest init.ora parameter has been deprecated.
WARNING: Please remove the background_dump_dest parameter from the init.ora file.
WARNING: The diagnostic_dest init.ora parameter now determines the location of the diagnostic data
WARNING: The new location for the background logs and traces is c:\app\oracle\diag\rdbms\orcl112\orcl112\trace
c:\tmp\bdd>
Message was edited by: JohnWatson
Sorry about formatting, I haven't sussed [code] tag yet.

SQL server Database - Command based Crystal reports parameters issue

Hi,
We are migrating Oracle to SQL server database and trying to point our crystal reports to new database.
In command based reports, the parameters are defined in the where clause like this
(' All' in {?Country} or loc.country in {?Country} )
On modifying the report script to ANSI standard, loc.country in {?Country} gets recognized by Crystal but 'All' in {?Country} does not work.
I am pretty sure that it should be defined in a different way,but not able to figure out.
Any suggestions?
Thanks,
Nithya

Hi Nithya,
What is the error message you receive?
-Abhilash

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

APP-FND-01702 An assignment does not exit for these parameters

Hi,
I am facing this below error in AP,AR,CM,GL Modules. If any one knows the solution plz revert back ASAP,
I encountered the error message when I created an invoice in AP module:
APP-FND-01702:An assignment does not exist for these parameters and one is mandatory.
Cause:The profile option Sequential Numbering is defined to have
sequential numbering always used. The current set of parameters does not have a sequence assigned.
Acction: Go to the Assign Sequqnces screen and assign a sequenct to the current set of parameters.
Regards,
senthil

Hi Senthil,
this is an issue with the configuration only, when the profile option is Always used system is referring to your Sequential numbering configuration, which seems to be not right / incomplete...Hence verify whether you have defined assignment for all the categories in the modules and re-test the same again ....
You can change the profile option value to Partially used, which will not throw an error, it would only give you a warning ..
Regards,
Ivruksha

When i go to about this mac and look at my storage it says that i have 33GB of music. i recently deleted 2 user accounts but can't find any of these files. Where do i go to delete these files?

when i go to about this mac and look at my storage it says that i have 33GB of music. i recently deleted 2 user accounts but can't find any of these files. Where do i go to delete these files?

What are you asking? Where music is stored or where the user accounts were stored?
Music should be in the music folder - perhaps inside of an iTunes folder.
User accounts should be on the home directory.

HT1151 I am trying to get pics off of an SD card. I plugged in the adapter into the USB port. Where do I go to download these pics onto my laptop?

I am trying to get pics off of an SD card. I plugged in the adapter into the USB port. Where do I go to download these pics onto my laptop?

Zapping the pram may work or just restarting your computer after repairing your desktop.
Resetting your Mac's PRAM and NVRAM
http://support.apple.com/kb/HT1452

Microsoft Virtual Academy - Building Linux-Based Solutions on Azure, Jump Start

Building Linux-Based Solutions on Azure Jump StartJuly 14, 2015 9am‒1pm PDT4pm-8pm GMT (5pm-9pm UK BST)
Do you run an open-source infrastructure? Want a public cloud solution that fits your environment? Join Senior Technical Evangelist Rick Claus and four engineers from the Azure Compute team for this live event, and see how easy and efficient it is to build Linux-based solutions on Microsoft Azure. (In fact, 20% of virtual machines that run on Azure run Linux!)
Explore options you can use to build, deploy, and manage your Linux infrastructure on Azure. Learn how they work and how to support, build, and scale them, along with how to make them available to Devs. See technical demos, and examine open-source tools, such as Docker containers, to manage DevOps pipelines on Azure and to dramatically increase productivity. Plus, walk through...
This topic first appeared in the Spiceworks Community

This is the second Flash Player zero-day in a week and cyber-criminals are going to once again capitalize on it.Categories: ExploitsTags: 0dayFlash Playerhacking teamzero dayzeroday(Read more...)
Read More

Why the values of these parameters can not be listed?

Why the values of these parameters can not be listed?
SQL> show parameter nls_time_format;
NAME                                 TYPE        VALUE
nls_time_format                      string
SQL> show parameter nls_date_format;
NAME                                 TYPE        VALUE
nls_date_format                      string

qkc wrote:
Do you mean the values are NULL? Why the default value not liested here.This is from my sandbox 10.2.0.4 database on linux. This was built just a few days ago and is absolutely default in all respects:
SQL> show parameter nls
NAME                                 TYPE        VALUE
nls_calendar                         string
nls_comp                             string
nls_currency                         string
nls_date_format                      string
nls_date_language                    string
nls_dual_currency                    string
nls_iso_currency                     string
nls_language                         string      AMERICAN
nls_length_semantics                 string      BYTE
nls_nchar_conv_excp                  string      FALSE
nls_numeric_characters               string
nls_sort                             string
nls_territory                        string      AMERICA
nls_time_format                      string
nls_time_tz_format                   string
nls_timestamp_format                 string
nls_timestamp_tz_format              string
SQL>Besides, it is a bad idea to depend on the defaults anyway. There are so many places they can be overridden that it is foolish for an app to depend on it. Rather, you should always be using (properly) the to_char and to_date functions to specify the formats at the individual sql statement. So the 'default' values become totally irrelevant.

I have an abundant amount of images on my iPad and iMac and running out of storage space. Where or what device can store these images for the least amount of money?

I have an abundant amount of images on my iPad and iMac and running out of storage space. Where or what device can store these images for the least amount of money?

I would suggest
http://www.lacie.com/fr/wheretobuy/index.htm
LaCie Rugged Mini

Hi. I d like to email a photo from iPhoto but I keep receiving the same error message saying that the combination username /password is incorrect so it won't send the email. How do I reset these parameters so I can email my pix? Thx

Hi. I d like to email a photo from iPhoto but I keep receiving the same error message saying that the combination username /password is incorrect so it won't send the email. How do I reset these parameters so I can email my pix? Thx

You have a number of things that will make this not work.
Your mailto link is not the way to go, take a look at this and it should get you on the right path.
http://www.paulgdesigns.com/learncontactform.php
On your action page, you can have it give the thank you message that you want. Having a seperate page saying they forgot to do something complicates matters more than you might wish at this point, and usually irritates people. however if you decide you want to go that way, look up "sticky forms". What this does is re-populate the fields when they have to go back to correct.
A better way would be to validate the information, you can use Spry if you want which is built into dreamweaver.
You also have in your html form this
enctype="multipart/form-data"
That is used for sending files, and since you are not, the form would not work, so you want to remove it.
Hopefully that will give you a starting point.
Gary

What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?

What is the default group id/ home /shell while adding new account with useradd without specifying these parameters?
reagrds

Hi,
You can check the default values from the below file
/usr/sadm/defadduser
and from this command
#useradd -D

Auto-set Conditional Build Tags Based On Style?

Is there a way to auto-set conditional build tags based on style?
I want to be able to import a Word document into RoboHelp and have it recognize certain styles as requiring certain conditional tags. For example, an imported Word document might have a style called WD_Internal and any text with that style would automatically have a conditional build tag assigned to it. The idea is to allow my SMEs to indicate which text is intended for internal audiences and which text is OK for customer consumption in a single central Word document using styles. When the content is correct, I'd import it into RoboHelp, have RoboHelp assign conditional build tags, then generate multiple printed versions of the document (an internal version and a public consumption version).
Setting conditional build tags is pretty easy, but it will still be a lot of work to manually set them. Is there a way to do this automatically?
I am using RoboHelp HTML RH9.

Hi,
There's no way to do this through the interface. You can however create a script to do this for you. Cycle through the content of the topics and insert the code for the CBT.
Greet,
Willam

Where are these parameters

Dear
i am working on single instance to RAC cloning and got stuck on this session 3.11.2 Load Balancing.
could not find parameters that mention in this note in the CONTEXTFILE.
Would someone please help.
Thanks in advance.
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
Doc ID: 388577.1
3.11.2 Load Balancing
Implement load balancing for the Applications database connections:
1. Run the Context Editor (through the Oracle Applications Manager interface) and set the value of "Tools OH TWO_TASK"(s_tools_two_task),"iAS OH TWO_TASK"(s_weboh_twotask) and "Apps JDBC Connect Alias" (s_apps_jdbc_connect_alias).
2. To load balance the forms based applications database connections, set the value of "Tools OH TWO_TASK" to point to the <database_name>_balance alias generated in the tnsnames.ora file.
3. To load balance the self-service applications database connections, set the value of iAS OH TWO_TASK" and "Apps JDBC Connect Alias" to point to the <database_name>_balance alias generated in the tnsnames.ora file.
4. Execute AutoConfig by running the command:
$AD_TOP/bin/adconfig.sh contextfile=$APPL_TOP/admin/<context_file>
5. Restart the Applications processes by using the new scripts generated by AutoConfig execution.
6. Ensure that value of the profile option "Application Database ID" is set to dbc file name generated at $FND_SECURE.
Note: If you are adding a new node to the application tier system, repeat the steps 1-6 for setting up load balancing on the new application node.

Hi Hussein,
i could not find these parameter in the CONTEXTFILE
Tools OH TWO_TASK s_tools_two_task
iAS OH TWO_TASK s_weboh_twotask
Apps JDBC Connect Alias" (s_apps_jdbc_connect_alias)
Would you please help.
Regards,

Where to build blog, based on these parameters

Similar Messages

Maybe you are looking for