Where to chk the PipeLine process steps in BPM Scenario...

hi experts,
i hav a scenario where i need to send multile file formats to an synchronous R/3 system and from R/3 it needs to be forwarded to the Target system in file format... its a BPM scenario...
i need to CHK the sequence of Steps or Pipeline process to knw where exaclty the message is at each piont of time...
can any one help on this plz...
Thanks and Regards,
Srinivas

its possible to do the same using the ALERT Framework also...for the same pls go through the info provided below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Also go through these blogs:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken]
The specified item was not found.
The specified item was not found.
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope it helps you in finding a solution to your problem.

Similar Messages

Processing steps in bpm

hi,
can u explain me the various processing steps like send,transform in bpm

You can find every thing you need in the Help.sap documentation http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
In addition also have a look at the blog Walkthrough with BPM By Krishna Moorthy
Do an SDN search also
Thanks
SaNv...

Own workflow process step (java) not listed in the generic Process step component

Based on the description Extending Workflow Funtionality I have used this sample to create a bundle with the CRXDE Development Environment. Almost just copying the code from the page (had to make some adjustments to correct program errors in this sample) an then build bundle. According to Note 2 this program should be seen in the list supplied by Process step Component when editing a workflow. But it is not there.
@Component
@Service
public class MyWorkflowProcess implements WorkflowProcess {
    @Property(value = "An example workflow process implementation.")
    static final String DESCRIPTION = Constants.SERVICE_DESCRIPTION;
    @Property(value = "Adobe")
    static final String VENDOR = Constants.SERVICE_VENDOR;
    @Property(value = "My Sample Workflow Process")
    static final String LABEL="process.label";
What do I need to do else?
Thanks,
Ulrich

Ulrich,
CRXDE does not support the Java annotations which are listed in the documentations. When you want to leverage CRXDE (which is for development ... discouraged), you need to migrate to JavaDoc style annotations.
For documentation how you can setup a development workflow based on a Java IDE and maven please see [0].
kind regards,
Jörg
[0] http://dev.day.com/docs/en/cq/aem-how-tos/development/how-to-build-aem-projects-using-apac he-maven.html

GP-The next process step still continue when current step has terminated

Hi,
I'm using CE7.1 SP3. I have created a business process flow using the Guided Procedure. Each step in the process is done by different role.
I have an approval step in the process. When the user clicks approve, the next step will get executed. When the user clicks reject, the whole process should be terminated. However during testing, it is found that the next step can still be executed even though a rejection is specified. The process is not ended.
I have specified in GP that if reject is selected, it should go to terminal state.
Can anyone help?
Thanks.
Regards,
Fui Voon

Hi James, Hi Maarten,
I also tested this step property in TestStand 2.0.1. and as result of my tests I can say the followings:
- If you set the CancelCurrentExecution property from a defined PreSubstep for a step type, than the step is not further executed (e.g. behaves normal)
- If you set the CancelCurrentExecution property from any other place (e.g. engine callbacks, sequencefile callbacks, post substep aso), then the step is executed normally (e.g. behaves abnormal)
The attached sequence file contains a modified MessagePopup step which has an additional PreSubstep that will set the Step.CancelCurrentExecution to the value of the Step.CancelExecution step sub-property.
When this sub-property is set to TRUE then
the message window is not shown anymore.
James, you're right, and Maarten, if you need this functionality for a limited set of steps then you can use this feature as a PreSubstep too.
Regards,
Silvius
Silvius Iancu
Attachments:
Example.seq ‏24 KB

XPRESS - Where to start the learning process

Can anyone point me in a direction to start learning XPRESS?
Tutorials, hello world example etc

Gaurav,
You can follow the below mentioned steps:-
1>Start with XPRESS pdf as:- Know about datatypes<i>,<s> etc then <set>,<append>,<contains> etc and then go for <dolist>
Test it in Rules
2>Know about User view,which is basic for any kind of path expression
You can import the test data un BPE...test data can be a string or can be a view
3>Now try for invoking the methods.

Receiver Determination steps for BPM scenario

Hi Experts,
Scenario : SOAP -> Calling different webservices
1. SOAP Client Request
2. Call the Initial webserive to get the unique Id. No need to pass any request to call this webservice, but it will give the response.
3. Take the Initial websrevice's response as a request to second webservice
4. Pass the SOAP client request to Third webservice
BPM steps
1. Receive Step for SOAP Request
2. Send Step for the Initial webservice call.
3. Transformation step Initial webservice response to request change.
4. Send Step for Second webservice (Pass the the Transformation step's target interface as a request)
5. Send Step for Third webservice ( Pass SOAP client request)
I am done with the BPM flow. Could you please help to do the Receiver Determination steps.
Usually I follow the below steps.
1. Sender Service to BPM
2. BPM to other services. I have a doubt with the second step. I am not passing the SOAP client request to Initial webservice. So, please tell me how to proceed further for the BPM Receiver Determination steps..
Thanks & Regards
Sara

Hey,
First, what is th purpose of your SOAP client request.
Is it just to trigger the BPM.
Second on what basis are you fetching the unique Id from initial web service.
If it is a normal scenario then, the reciever determination will be like this.
Soap client-> BPM
BPM->initial webservice
BPM->second webservice
BPM->third webservice
but in this particular scenario i dont know which data is being used to fetch the unique Id.
regards,
Milan

Fork Step in BPM scenario PI 7.1

Hi All,
I have a requirement where in i will have to collect 3 different messages coming from the source and then combine these 3 messages to a single message and sent it to Target System .
To achieve this i came up with a BPM where in fork step was used and inside the fork step i added 3 branches with 3 receive steps to receive 3 different messages from the source .
Problem i am facing here is , the source system might send all the 3 messages or it might send only 2 messages or 1 message as well depening on the scenario .
So when we get only 2 messages frm the source system , fork step goes into waiting state since its waiting for the 3rd message also to come in . In this case i want the BPM to go ahead with 2 messages after a certain specified time (say 2 min) .
I tried adding wait step, deadline branch . Nothing seems to be working .
Please suggest what needs to be done here .
Waiting for your inputs
Regards
Vinay P.

Set Necessary Branches to 1 in the Fork properties. Use the fork inside a block with time out. In timeout branch throw an exception. Define an exception branch for that exception. It should work..!!
VJ

Pipeline Processing

If I have a file to file Scenario, what are all the steps involved in the Pipeline processing.
(When the file is picked up by Adapter first, then it enters into the Pipeline until that point I am clear I hope)
Thanks

Hi Mohini,
When a source message reaches the Integration server, it performs 6 steps before the message reaches the destination. The steps are:
1) Receiver Determination: This steps determines the system that participates in the exchange of the message.
2) Interface Detremination: For each receiver determine which interface will should receieve the message.
3) Message Split: If more than one receievers are found, Xi will instantiate new message for each receiver.
4) Message Mapping: Mapping to transform the source message to destination message format.
5) Technical Routing: Bind a specific destination and protocol to the message.
6) Call outbound Adapter: Send the transformed message to the adapter or a proxy.
One can examine these steps in Runtime Workbench using the Transaction: SXMB_MONI.
Hope this answers your query.
Regards.
Praveen

SAP process steps for tool room

What will be the SAP process steps for tool room.
Moulds are manufactured and maintenance of moulds are being done in the tool room

Hi,
Assuming the moulds are available, you may follow the steps below:
> Create mould as Equipment with PRT screen data
> Create measuring point for this equipment.
> Create counter based maintenance plans for preventive maintenance.
> Use applicable user exit to update the measuring point, in association with PP product confirmation, where this mould is used in respective work center.
> This will give the preventive maintenance schedule in accordance with usage.
> For unplanned repairs, use notification/Maintenance order route to calculate the costs and to maintain history.
> When life expires, deactivate and set 'deletion' flag' to the respective mould equipment master, so that it can not be used in production.
> Detailed scenario should be mapped, based on the actual customer requirement.
James Prabaharan

Error handling in the integration process

hello all,
here i have a situation in which , i have to do some work in the integration process step of the integration repository, i am given a txt file which has a 100 records each is a employee detail, the last record has the summary total , that is last row contains the sum of a particular column.
now i am supposed to do somthing in integration process, so that my program should add all the values of the specific field , of all employees and check it with given sum, if it tallies, we have to go ahead, or else send back a mail saying there is error input,
any help will be greatly appreciated.
thank you

Hi kutumba,
in the container of the BPM you crate a element of type integer.
As I told you in your other thread you need a multine-container element taht is looped in a BLOCK.
In this BLOCK increment your counter-element. After the Block define a condition for sending/not sending.
Also refer to you SAP-BASIS SWV! There are helpful samples!
Regards Mario

IView Appraisal Document not showing customer process step names.

the iView "Appraisal Document", after pressing the pushbutton to move to the next process step, shows the text
"status changed to 'In Review'" in the info area of the iView.
we have changed the names of the standard process steps using IMG "Define Tabs and Process Configuration for Template"
for instance we renamed "In Review" to "Progress Tracking".
the issue is the iView "Appraisal Document" still shows "status changed to 'In Review'" instead of showing "status changed to 'Progress Tacking'".
note: the names of the steps in the roadmap (on top of the iView) show correctly, it is just that the state transitions "Status changed to..." the names of steps show standard instead of customer steps.
any idea why?
Thanks,
Tiberiu

Hi,
My first advice would be to talk to customer out of this.
As a client using SAP you're using standard software which has predefined 'names' for certain things. The names of appraisal - statuses is one of them.
(I've never seen a client wanting to adopt the names of menu texts in Microsoft Office and personally I don't seen the difference. Of course, it will take some time for the client to get used to the new names but in a year or two, everybody is used to those terms).
If you don't succeed, there's no need to change programs. You'll need to change the values of the standard SAP - domain mentioed before.
Wilfred.

Differences between the O2C processes in SD and CRM

Hi
Can anyone tell me the differences between OTC processes in CRM and R/3?
Thanks
Tarang

hi
before that you need to understand what is the difference between the sales and business process
here it is
normal scenario of identifying the customer and getting the money for what we sold to him or gave him service is called Business Process.It includes a lot of activities like Sales Order, Delivery Picking(what kind of picking), and Invoice(what kind of invoice).But, where as a sales procees is nothing but it includes up to how we sold to the customer, like in SAP we can say that only up to sales order.
or
The sales process which relevant sales scenario such as sales order, delivery and billing where as business process which contains finance, material and sales scenarios it is nothing but complete business of the organization.
Bussiness process defines way of defining your businees needs,which includes
what type of businees you are carrying out.
Producion scenario to plaaning for production ,storage and dispatching with sales requirements to selling terms.
Sales process is part of your defined process ,how you do business with customers.(categarization of customers to discount to rebate)
Hope this will put some light on this issue.
Cheers
or
Sales Process is equiv. to the Order to Cash Process (OTC) which is an outflow process meaning an outflow of goods in exchange for cash, whereas a business process is equiv. to Procure/Purchase to Pay (P2P) process which is an inflow process meaning source of goods - where are goods sourced?....internal supply, external supply - which is an inflow process where good are sourced by company.
or
Business process is the Macro and Sales process is the Micro.
The sales process is limited just till processing the Sales Order. The Delivery - The Transfer Order (In case WM is active) - The Shipment are all a part of the Distribution process.
The business process complies of the way the whole sales cycle is carried out and it could be right from the inquiry till the Accounting Document is cleared.
now O2C is order to cash it is placed when ever final purchase order lies with the manufacturer,till date and end date bot are specified
rest you can have from above post
hope it will serve your purpose
best regards
ashish

Defining the Business Process Structure

Dear All,
I am defining the Business Process Structure in SOLAR01.. by default we will get the following Structure
Project
               Master Data
               Organization Structure
               Business Scenario
                               Business Process
                                           Business Process Step
My Question here is , i want to add some node on parallel to to Business Scnario and Business process. as per my knowledge it is not Possible . But you guys did something on this please let me know.
Project
               Master Data
               Organization Structure
               Business Scenario
               non-SAP business scenario
                               Business Process
                                           Business Process Step
                               non-SAP business process
                                           Business Process Step
Could some expert suggest on this ?

Dear Prakash,
In solution manager till EHP1 it is not possible to meet what is ur requirement but you can do the following as an alternative
Project
Master Data
Organization Structure
Business Scenario Std Selected from BPR e.g Service Desk
Business Process std
Business Process Step Std
Business Scenario Non Std Directly entered the name of scenario in Structure tab e.g any Zscenario
Business Process Non std ( you need to add here the process for zscenario)
Business Process Step Non Std ( you need to add here the process step for z*)
But if you very specific to go with 4 main nodes as you said then you need to modify the standard with ABAP Developement and there is no alternative.
Hope it clarifies.
Regards
Prakhar

The setup process freezes when installing CS4 on OSX 10.7.5

It works right up until the time it actually begins the install. The screen says "Currently installing Adobe Anchor service CS4". It's the very beginning of the install, 0%.
I let it sit to see if it eventually would do something, but it sat overnight and is still in the same spot. If I do a force quit it says not responding. I'm not sure where to start the troubleshooting process. Any help is much appreciated.

You will want to begin by reviewing your installation logs. You can find details on how to accomplish this at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

HotPixels show up after several LR processing steps

Dear all,
I am having two problems with Nikon Raw Processing and LR4.1.
1st: I am producing and processing content for ESO (European South Observatory), especially TimeLapses. Those sequences consist of hundreds of Images in hundreds of folders. Source files are either from D3s, D4, D700, D7000 or the like.
Several development changes are applied to single key images in a sequence, and those later applied to all images in that sequence. Problem is that after a certain amount of development changes (that are written in to the XMP sidecar files with LR4), hot pixels start to show up in the images that were not visible before.
Seems like the oversaturated pixel information (Hot Pixel) that is always stored within the RAW images, is lost after a certain amount of development changes.
2nd: is there a known trick how to force LR4 into updating ALL thumbnails after development changes, including those, that are outside the currently visible grid view?
It is very time consuming to manually page up and down the grid to have LR4 updating the thumbnails on each page (of for example a folder of 1200 images) so that one gets a preview of the TL sequence with the current development changes in Library View.
Thanks for any help
Chris

Hi Trshaner,
yes, to all your suggestions. Tried them alreadym and it's in our workflow.
With Astro-TimeLapse and/or panning motions it is even more complex. You immediately see the static hot pixels during a timelapse motion on a moving landscape.
First you cannot use the adjustment brush on stars - it looks odd when they move trough and brush areas fill and empty with other stars during the Timelapse Motion. Second once you pan or have a dolly movement some brush areas "move" trough trees or other parts of the landscape. it looks very ugly. what you can do is to stop brushing the hot pixels there for the the couple of images, or do all by hand means adjusting the healing brush location outside the tree or other part of the landscape moving by.
enclosed are some screenshots with brushed hot pixels, and the start of a pan and the end - the timelapse motion in this instance goes over 344 frames (not that much, but enough to work on for a couple hours).
remains my question:
I don't see those hot pixels during the first processing steps which are all synced over all images of a set (lighten darks, color correction, gradation curve etc). at some point during processing and developing they start to show up. And I can't remember that this was the case with LR3.
any idea on how to force LR4 to update ALL previews also those outside the grid are still very appreciated.
this here illustrates my problem:
(watch it until the end how it should look like on preview)
https://vimeo.com/43257787
pw: starry_lr4
it got a bit better now with a current MBP 15" 2.6 Ghz Core i7 and SSD's and Mountain Lion (Lion was quite slower), but still previews outside the grid do not get updated...
all the best
c
illustration:
begin of panoramic timelapse move
somewhere in the middle
near the end
hot pixel detail of last frame without heal brush

Where to chk the PipeLine process steps in BPM Scenario...

Similar Messages

Maybe you are looking for