Where to get/load SHA1withRSA algorithm?

Our Java install contains the SHA1withDSA algorithm, but not the SHA1withRSA algorithm. Where do I get it and how do I install it? I am running Oracle9i on Windows and am just now starting to write code for its Java engine. I need to "sign" certain data with the SHA1withRSA algorithm.
Thanks,
Michael

Is this the only source? Or are there others? Their web site is cute, but does little to generate corporate-comfort . . .
Thanks!

Similar Messages

Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

Refer to this:
Direct Download Links for Adobe Software
Mylenium

Where do Pipeline Component classes get loaded from?

Can someone please point me to some documentation that describes where my Pipeline
Component classes get loaded from?
I have just wasted hours on this - to find that they are not loaded from WEB-INF/classes
- but instead they must be available to the EJB classloader. The sampleportal
is completely misleading in putting the classes in WEB-INF/classes - because they
are in fact loaded from the sampleportal EJB jar!
Did I miss something obvious?
regards,
Nick

Nick
Refer to this portal doc on dev2dev
ftp://edownload:[email protected]/pub/downloads/webflow.doc
-tulan
"Nick Minutello" <[email protected]> wrote
in message news:[email protected]..
>
>
Can someone please point me to some documentation that describes where myPipeline
Component classes get loaded from?
I have just wasted hours on this - to find that they are not loaded fromWEB-INF/classes
- but instead they must be available to the EJB classloader. Thesampleportal
is completely misleading in putting the classes in WEB-INF/classes -because they
are in fact loaded from the sampleportal EJB jar!
Did I miss something obvious?
regards,
Nick

APEX JS libraries - From where does these are getting loaded

Hi All,
In every page I can see APEX is loading following JS libraries.
<script src="/i/javascript/apex_ns_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_get_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_builder.js" type="text/javascript"></script>I was thinking these must be specified in the page template, but it's not the case! Could you tell from where does these are getting loaded?
Thanks,
Hari

They are included by the #HEAD# substitution string in the page template.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#sthref1670
This substitution includes the standard APEX CSS and JS references and the contents of the page HTML Header property. From APEX 3.1, the standard CSS/JS can be suppressed using the Include Standard CSS and JavaScript HTML Header property.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/bldr_pgs.htm#sthref613

Hyper-V NIC Team Load Balancing Algorithm: TranportPorts vs Hyper-VPorts

Hi,
I'm going to need to configure a NIC team for the LAN traffic for a Hyper-V 2012 R2 environment. What is the recommended load balancing algorithm?
Some background:
- The NIC team will deal with LAN traffic (NOT iSCSI storage traffic)
- I'll set up a converged network. So there'll be a virtual switch on top of this team, which will have vNICs configured for each cluster, live migration and management
- I'll implement QOS at the virtual switch level (using option -DefaultFlowMinimumBandwidthWeight) and at the vNIC level (using option -MinimumBandwidthWeight)
- The CSV is set up on an Equallogics cluster. I know that this team is for the LAN so it has nothing to do with the SAN, but this reference will become clear in the next paragraph.
Here's where it gets a little confusing. I've checked some of the Equallogics documentation to ensure this environment complies with their requirements as far as storage networking is concerned. However, as part of their presentation the Dell publication
TR1098-4, recommends creating the LAN NIC team with the TrasportPorts Load Balancing Algorithm. However, in some of the Microsoft resources (i.e. http://technet.microsoft.com/en-us/library/dn550728.aspx), the recommended load balancing algorithm is HyperVPorts.
Just to add to the confusion, in this Microsoft TechEd presentation, http://www.youtube.com/watch?v=ed7HThAvp7o, the recommendation (at around minute 8:06) is to use dynamic ports algorithm mode. So obviously there are many ways to do this, but which one is
correct? I spoke with Equallogics support and the rep said that their documentation recommends TransportPorts LB algorithm because that's what they've tested and works. I'm wondering what the response from a Hyper-V expert would be to this question. Anyway,
any input on this last point would be appreciated.

Gleb,
>>See Windows Server 2012 R2 NIC Teaming (LBFO) Deployment and Management for more
info
Thanks for this reference. It seems that I have an older version of this document where there's absolutely
no mention of the dynamic LBA. Hence my confusion when in the Microsoft TechEd presentation the
recommendation was to use Dynamic. I almost implemented this environment with switch dependent and Address Hash Distribution because, based on the older version of the document, this combination offered:
a) Native teaming for maximum performance and switch diversity is not required; or
b) Teaming under the Hyper-V switch when an individual VM needs to be able to transmit at rates in excess of what one team member can deliver
The new version of the document recommends Dynamic over the other two LBA. The analogy that the document
makes of TCP flows with human speech was really helpful for me to understand what this algorithm is doing. For those who will never read the document, I'm referring to this:
"The outbound loads in this mode are dynamically balanced based on the concept of
flowlets. Just as human speech has natural breaks at the ends of words and sentences, TCP flows (TCP communication streams) also have naturally
occurring breaks. The portion of a TCP flow between two such breaks is referred to as a flowlet. When the dynamic mode algorithm detects that a flowlet boundary has been encountered, i.e., a break of sufficient length has occurred in the TCP flow,
the algorithm will opportunistically rebalance the flow to another team member if apropriate. The algorithm may also periodically rebalance flows that do not contain any flowlets if circumstances require it. As a result the affinity
between TCP flow and team member can change at any time as the dynamic balancing algorithm works to balance the workload of the team members. "
Anyway, this post made my week. You sir are deserving of a beer!

Images not getting Loaded while running Java Application through jar file

Hello Friends,
I have a problem while starting my application.I have written my application using pure java.There is no JSP or anything just pure swings.Mine is a standalone appplication.So i used to run it using a batch file.And when i used to start my application it used to not show me the images.so what i did was i mentioned the starting directory in the properties of the batch file (ie in the start in column field).But that was when i was using weblogic server.And i have lot of people working on the same application.so i used ZAC publisher in weblogic and along with that i used to publish the batch file also.so the users dint have any problem.But now what is my problem is i m trying to use JAVA Webstart instead of weblogic ZAC.Now in webstart what happens is that i have to run the appliaction thru jar file.so where do i mention the class path so that the images get loaded.As of now the imaes are not getting loaded.i feel this is a class path problem.but where do i mention it that is my problem.It would be really helpfule if someone could help me out.
thanx and regards,
[email protected]

try out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file

SPM Data Loads : Less number of records getting loaded in the Invoice Inbound DSO

Dear Experts,
We are working on a project, where data of different NON SAP Source Systems is being loaded into SPM, via Flat File Loads. We came across a very weird situation.
For other Master and Transaction Data objects, it worked fine, but when we loaded Invoice File, less number of records are getting loaded in the Inbound DSO. The Invoice File contained 80000 records, but the inbound DSO has 78500 records only. We are losing out on 1500 Records.
We are unable to figure out, as to which 1500 records are we missing out on. We couldn't find any logs, in the Inbound Invoice DSO. We are unable to find out if the records are erroneous, or there is any issue with something else. Is there a way to analyze the situation / Inbound invoice DSO.
If there is any issue with the Outbound DSO or Cube, We know that it is possible to check the issue with the Data Load request, but for the Inbound DSO, we are not aware, as to which the way to analyze the issue, and why Inbound DSO is taking less records.
Regards
Pankaj

Hi,
Yes, It might be happen in DSO, because the data records have the simantic keys, so in Keyfileds selection you might have less no of records.
If you have any rountines check the code(If any condetion for filtering the records).
Regards.

Find out where class was loaded from

Is there a way to find out from what resource the java runtime loaded a class from? I know that -verbose:class argument will tell where classes were loaded from during runtime for only normal sun libs (core libraries from rt.jar), but it does not say where it is loading external stuff from. Can this be found out?
For example, if a particular third party class is available several times (through accidental redundancy in classpaths)-- find out which resource it was taken from.
I am sure you could get down into the weeds and look thorugh all the classpath entries for which ones contain which classes-- but there has got to be a better way.

import java.io.File;
import java.net.JarURLConnection;
import java.net.URL;
import java.net.URLDecoder;
private File getPathToClass(Class c)
     try
          URL url = getClass().getResource(c.getName() + ".class");
          if( url.getProtocol().equals("jar") )
               JarURLConnection jarCon = (JarURLConnection)url.openConnection();
               url = jarCon.getJarFileURL();
          File file = new File(URLDecoder.decode(url.getPath(), "UTF-8"));
          return file;
     catch(Exception e)
          return null;
}

Port Channel Load-Balancing Algorithm (North Bound)

I'm trying to figure out what the load balancing algorithm for the 6100 and 6200 FIs for the Northbound connections. I can't find any documentation on how to change it.
The Nexus 7000s use an 8-bit hash, making it very easy to do something other than 2, 4, or 8 link port channel and get even (at least algorithmically) distribution.
Catalyst switches (not sure about Sup2T though) would use a 1, 2, or 3-bit index, which would skew traffic algorthmically if you used a non-power of 2.
Looking at the 5K documentation, it seems to use the Catalyst style (though haven't been able to confirm). My guess is that whatever is used for the 5Ks is used for the 6100/6200.
Design wise, this would mean you would want to use powers of 2 for your NB uplinks.

Hello Tony,
On UCS FI, it uses " sr-cdest-ip " as the load balancing algorithm and uses 8 parameters for hashing
6248-01-B(nxos)# sh port-channel load-balance
Port Channel Load-Balancing Configuration:
System: source-dest-ip
Port Channel Load-Balancing Addresses Used Per-Protocol:
Non-IP: source-dest-mac
IP: source-dest-ip source-dest-mac
6248-01-B(nxos)# show platform fwm info pc port-channel 1
dump pc info: if_index 369098752 dump_all 0 verbose 1
Po1: state 0x0 #pifs 1 fwimpd ctx 0x9666c1c
Po1: hash params - l2_da 1 l2_sa 1 l3_da 1 l3_sa 1
Po1: hash params - l4_da 1 l4_sa 1 xor_sa_da 1 hash_elect 1
I could not find an option to change these values.
Padma

[NOT SOLVED] Acer D250 - where to get CPU temp info

I was wondering where to get CPU temp info other than acpi and lm-sensors...
laptop: acer aspire one aod250-1613 ("d250"), intel atom n280, bios v1.22, arch up-to-date, kernel 2.6.31
problem with lm-sensors: even though it is supposed to have support for Atom ( http://www.lm-sensors.org/changeset/5773 ) via coretemp ( http://bugzilla.kernel.org/show_bug.cgi?id=11161 ), it does not find any sensors. emailed lm-sensors people + sent a message to kernel dev, hoping for an answer.
problem with acpi: including all the temp files ("thermal") I found under /proc/acpi and acpi -V, it reports cpu temp unrealistically as always 26C or 27C even when laptop is very hot. Confirmed with one more D250 user here: http://bbs.archlinux.org/viewtopic.php?id=86124
tried solutions: Apart from trying to make lm-sensors work (tried modprobing all sorts of modules, then emailed their list reporting the problem: http://lists.lm-sensors.org/pipermail/l … 27432.html ), I spent a lot of time looking around in /proc/ and /sys/ for a file that would have a realistic cpu temp in it to no avail. also emailed linux-acpi email list http://www.spinics.net/lists/linux-acpi/msg26078.html but I'll probably not get an answer.
behavior in windows: I downloaded HWMonitor (does not work in wine properly) from here: http://www.cpuid.com/hwmonitor.php It shows two temperature sources: acpi (which reports, as in Linux, the temp wrongly), and "Atom" (which correctly reports the temperature). So there is some sort of sensor in this laptop that is capable and able to show the temp properly...
contact with acer: no help there.
Any ideas what to do?
edit: updated with some links
EDIT:
I solved this [new update: I did not solve it as it turns out, see below] by downloading the coretemp.o module source file from kernel 2.6.32, putting it under a folder named Downloads, and compiling it with the command:
make -C /lib/modules/2.6.31-ARCH/build M=/home/user/Downloads modules
I then tried the module out using
sudo insmod coretemp.ko
It worked, so I moved the coretemp.ko file here:
/lib/modules/2.6.31-ARCH/updates/drivers/hwmon/coretemp.ko
The "updates/drivers" folder was already there, but I think it was created by the scripts of compat-wireless.
I then ran
sudo depmod -a
and placed the module's name in my /etc/rc.conf file
MODULES=(!snd-pcsp coretemp acpi-cpufreq !p4-clockmod ...)
If the coretemp module cannot be loaded after a reboot, take a look at compat-wireless scripts which create a /lib/modules/2.6.31-ARCH/updates/drivers/ folder --either the kernel automatically ignores modules with same name as those under ...../updates/ forlder, or it was compat-wireless scripts that did that. I don't know, try
The temperature value is now readable by
sensors
as well as through the file
/sys/class/hwmon/hwmon1/device/temp1_input
and
/sys/class/hwmon/hwmon2/device/temp1_input
Last edited by vajorie (2009-12-20 07:27:19)

it turns out that I couldn't solve this yet. funny enough, coretemp gets $ sensors to show *hdd* temperature... not the cpu. checked with hwmon utility that runs in windows.
I have no idea what to do, where to email, whom to ask... any ideas?
sensors output fyi:
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +37.0°C (crit = +90.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +36.0°C (crit = +90.0°C)
acpitz-virtual-0
Adapter: Virtual device
temp1: +26.8°C (crit = +100.0°C)
note to self: max cpu temp above is reported correctly, even though measurement is not cpu's temp...
Last edited by vajorie (2009-12-20 07:36:00)

Monthly sales forecast file upload new combinations not getting loaded.

For one of our planning areas, I get sales forecast as spread sheet and upload this to the infocube.
We run CIF daily and monthly also to include all new material.
When I upload the file when I checked the log everything went fine with 3 warnings for 3 products with message "contents of the infocube not contained in BasicPlobStruc.
Now these material are already in APO by Sold to party is new and there is no combination to this Sold to party and hence the the data did not get loaded.
Now my Client wants to change whatever required so that all new combinations data are included in when month end sales forecast is loaded.
Can you advice what needs to be done as ther are large number of products I wont which are new combinations and as far as my knowledge is concerned , since there is no history CVC's are not automatically created.
Can anyone advice.

Hi Siva,
To b frank I did not completely understand what you are talking about as you are all over.
As I understand you are getting excel file for sales forecast and you upload the flat file to cube and generate CVCs based on this cube. You are not able to generate the CVCs for all combinations in the cube.
"Sold to party is new"-- where is this new? in the cube data?
"contents of the infocube not contained in BasicPlobStruc." - You get this warning if you have lets say 4 characteristics in your cube and only 3 of them in the planning object structure. This is ok. The rule of thumb is that "Your planning object structure has to be subset of your infocube". Which means that you cannot have 3 characteristics in cube and have all those 3 +1 additional in POS.
This still does not stop the system from creating all combinations int he cube as CVCs.
The possible reasons why the combinations(CVCs) are not generated from cube:
1. If there are empty values in a record like below
Plant--Materialsales org.-customer---qty.
P1--M1SO1____----10
P2--M2SO2C2--
17
The system only creates the combination P2M2SO2C2 but leaves out the first combination..Why? you have an empty value and system cannot take it so it leaves it out.
2. If you are checking the flag "Check SCM master data" in MC62 while CVC creation. The system checks the master data for products, locations and if the product or location does not exist the system doesnot create the corresponding combination.
Please correct me if I misunderstood you and also do not hesitate to ask more questions for clarity.

What/where does VideoDisplay load into?

When VideoDisplay loads an FLV, where does it go? Into
memory? Onto the local filesystem somewhere?
I've got an app that loads an 80Mb FLV but the memory usage
of the browser (Firefox) doesn't seem to climb, and I don't see any
evidence of disk space being used in the shared objects directory
or in the Firefox directory associated with the profile I'm using.
The app listens for progress events and shows progress, and I
can seek around in the video, so I'm pretty sure it's all getting
loaded.
Any ideas?

Progressive download FLV content is cached by the browser.
Video streams from Flash Media Server are not cached. You may not
see it in your cache until it is fully downloaded. Then you can
leave the browser open and go to your cache folder to find
it.

My printer Deskjet 5550, print cartridge no,56. in malaysia where can get it

hi,
my printer Deskjet 5550, print cartridge no,56. in malaysia where can get it. or have any cartridge same use it.

i'm having the same problem and i'm guessing since no solution has been posted it's a HP defect.
cartridge light is blinking and green E in the window
i hope the solution is posted soon or my next printer won't be a HP.
has anybody got this to work?
Printing an alignment page using the printer control panel
Press and hold the Cancel button and then press the On button. Release both buttons.
Press and release the Cancel button.
Press and release the Copies button.
Press and release the Paper Type (Photo) button.
Press and release the Color Start Copy button. An alignment sheet prints.
Step one: Print and time a test page
Follow these steps to print a test page:
Load plain paper in the tray.
Press and hold the Cancel button and then press the Start Copy Color button The self-test page prints.

IAstoreA.sys bluescreen / where to get drivers? [GT70 0nd]

Hey guys,
i just wanted to mount an .iso with WINcdemu and got an bluescreen right after the mounting (IAstoreA.sys) so i've read around and figured it out it has something to do with "RAID"?!
So i wanted to take a look on the MSI site but.. for my laptop the site isnt there anymore :O
Where to get the drivers for the RAID now?
System:
Win7 x64
MSI GT70 0nd

Quote from: 4g63pilot on 17-February-14, 04:23:17
Thanks Zipper. Its odd that they don't have that when you look at the US site. The other odd thing is the driver version they have for download is the same that came loaded 311 from almost a year ago. On the NVidia site they have version 334 I think. Shouldn't they have a newer version on the MSI site ? Thanks for any help.
Most manufacturer's will, from time to time, post updated drivers. But it tends to be rare. Because that also means quite a bit on their end, such as testing, verification, etc...for every laptop model, and every new driver.
In the end, it's too costly and time consuming for them to release a new, authorized, official driver everytime one gets updated.
Use the ones from NVidia's site, they should work just fine.
As far as IAstoreA.sys, that driver is actually related to Intel's chipset/RAID driver and has nothing to do with the video card.
I would consider checking Intel's website for a new chipset/RAID driver for your notebook.

I am looking to purchase the first ipad that came out.... any suggestions of where to get one NEW OR GENTLY USED

I am looking for one of the first ipads that was produced. I do not want to spend a load of money on one and would be willing to purchase a gently used one.
any ideas of where to get one besides ebay?
thanks for your help

Apple occasionaly offer some first generation refurbished units.
http://store.apple.com/us/browse/home/specialdeals
Though you'll pay more than you will on eBay.
Matt

Where to get/load SHA1withRSA algorithm?

Similar Messages

Maybe you are looking for