Which bom explosion/dependent req. used when creating order
a material's production version ( MRP4 in material master) has 2 or more versions and all versions are valid. when creating a production order, which version will the system take?
Dear,
If you are creating the production order manually through CO01,if your order type dependent parameter for the order type in OPL8
is having manual selection of prod version means the system will give the pop up to select the production version.
If it's an automatic selection means the system by default will pick the first production version,if you are having more than 1
production version for same lot size and validity.
Check and revert.
Regards
S Mangalraj
Edited by: Mangalraj.S on Aug 25, 2010 12:48 PM
Similar Messages
-
Where is the setting for indicating which calendar i want to use when creating an event?
When I use iCal on my iPhone, I use the + sign and then get a screen that gives me Title, Location, Starts, Ends, Time Zone, Repeat, Alert, URL and Notes. I used to get the option to choose which calendar (personal, work family, etc) that I want to use. That Calendar bar is no longer there. Why not?
When I use the iPhone's Calendar app, I have the following avaialble when creating a new Event.
Title
Location
Starts/Ends
Repeat
Invitees
Alert
Second Alert
Calendar
Availability
URL
Notes -
Bom Explosion/Dependent requirement
Dear Gurus,
In Material Master in MRP4 view there is one field under Bom Explosion/Dependent requirement individual/coll. when we select indicator 1 it generates requirements individually and when we assign indicator as 2 system cumulate the requirement,but if we keep that field blank i.e. individual and collective requirement how system decide the priority for individual and collective requirement.How system behaves in that condition.
With Regards.I am asking about ROH BOM components.
Dear ,
Yes I know, If you maintain collective indicator for header material, IF the ROH as blank in indiv/collective indicator, ROh material behave like collective reqmt
If you maintain individual indicator for header material, IF the ROH as blank in indiv/collective indicator, ROH material behave like individual reqmt -
Which function module could be used to create ACTIONs in transaction
HI,
when we open a transaction use TCODE CRMD_ORDER, there is always a tab named 'Action'. And Which function module could be used to create a new action?
THS!Hi Gang,
I am not sure about the Function Module but ya if you access through this link i belive you will be able to create ACTION for your Transaction.
Link:[Action|http://help.sap.com/saphelp_crm70/helpdata/en/54/238e39e1ba3541e10000000a11402f/frameset.htm].
Let me know in case you need any more help.
Vijayata -
Which user exit can be use before production order creating?
which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit -
Tables used when creating a sales return with and without refrence
Hiya gurus,
I am developing a report to display sales order and sales return created from one partiular storage location and for one particular division. I need to get the tables used when creating the sales order and the sales return's.
For sale order I would be using VBAK and VBAP but for sale return with refrence and without refrence i am not sure which tables to look for.
kindly please let me know which tables i go for to get the sale return data.
Thanking you very much, your efforts are deply appreciated
Cheers,
ZIaHi,
U can see VBFA tablefor CompleteDocu flow with differentconditions.
Regards, -
What port numbers are used when creating temporary queues
Using the following code as an example, what port(s) are used when creating temporary queues? Is it a range of ports? Is it random? And is it configurable? If you have any insight on this, please let me know. Thanks.
QueueConnection con = connectionFactory.createQueueConnection();
QueueSession session = con.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
TemporaryQueue replyQueue = session.createTemporaryQueue();The only ports I know about are the defaults ports:
JMS 7676
IIOP 3700
Are these the only ports that are used, even for temporary queues? -
Which digital certificate (SSL) is used when a proxy client is created
Dears,
Could someone please guide if there are more than one digital certificate (SSL) added to the SAP system, and we create a proxy client using the 'URL' (https://....) option, than which digital certificate will be used in the check done.
Thanks.
RedaThe names that go on the certificate must match the names you planned when you did the CAS namespace design.
Some details here:http://blogs.technet.com/b/exchange/archive/2014/02/28/namespace-planning-in-exchange-2013.aspx
So in your case if the cert does not match the name, then this will prompt users with errors. They need to match. As long as all your internal devices trust the issuer of the internal CA then you can use that. Installing an
enterprise CA will automatically publish it's root CA public cert into AD so it works easily.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
BOM Explosion/dependant requirements
Dear All,
I have a concern regarding the "MRP 4" view in MM.
BOM/Explosion
Individual / Collective requirements
"MRP 3" view
Availability Check
Availability Check (Daily / Individual)
I would like to know the effect of these settings clearly with an example please.
Thank you in advanceHi,
1. The Individual Collective indicator 1/2 indicates how to club the dependent requirements either Individula Processing or Collective Processing.
This is generally used in MTO Scenario.
Here, For eg., you have 2 FERT Materials, in that 1 component say xyz is same.
If you want to club the requiremnts for for xyz for both the sales orders then you need to select 2.
By defult system will create PurReq for xyz as Sales Order/Customer Specific.
2. Now the Availability check:
Specifies whether and how the system checks availability and generates requirements for materials planning.
The availability check can be carried out in MRP for the depedendent requirements. This means that the availability check can directly check whether sufficient material is available for the production of the assembly. The availability check is initiated from planned order processing. It is not carried out automatically in the planning run for each requirement of an assembly.
Checking Group and Checking Rule clubbed together forms the Checking control..
Hope this helps..
Regards,
Siva -
What PDF settings are used when creating DPS articles?
When you create a PDF file using Acrobat Distiller or InDesign you can modify settings such as font subsets, image down-sampling and compression which will have an impact on the final file size. Does anyone know what settings are used when articles are rendered in PDF format in DPS and can the settings be modified? Specifically, what type of compression is applied to images? If I were to place two images on a page, a png and a jpg with medium quality, would they be embedded in the PDF as is or re-compressed in another format and/or level of quality?
Thanks for your help.
So images placed in an InDesign retain their original file format and are unzipped when the article is loaded in the app.
I'm assuming that if compression is applied to the original image files it can have an impact on performance. If you were to use jpeg files in a document they would need to be unzipped and decompressed. I've read other forum posts that suggest the iOS jpeg decompression engine is too slow to present a fluid user experience in a DPS app. The combined processing time of unzipping and decompressing jpegs files may steer me towards the png format. -
De-normalized tables easier to use when creating forms in APEX?
I have about 6 normalized database tables and I want to create some forms that have 15-30 input fields per page (2 pages). I havn't been using APEX long but it seems that when creating forms based on tables you can only base the form on one table at a time. Is there a way to create a form based on several tables and still have APEX do the automatic row processing? Is this difficult?
Is it a better idea to insert this data directly into 1 de-normalized table and then run a pl/sql procedure to load them into other tables?
I should add that I would only want to insert the data into the normalized tables once the user has submitted the final page (ie. paid for their transaction).
SamAssuming your developing some sort of shopping cart type application, you could use Apex collections to store data collected in your forms. Then once your user has "paid for their transaction", process the contents of the collection and update your normalised tables accordingly.
See the help for info on using collections. Hope this helps. -
URGENT project settings to use when creating broadcast quality television
Hi,
What project settings do I use to create broadcast quality television in a widescreen format. Note I use a mac book and also I'm in NZ so we use PAL. I'm only using animation and still pictures so haven't got any video to import.
I work for a charity museum and my boss has asked me (last minute) to make the ad as we have no money for a professional studio. I'm used to making videos for exhibits only.
Many thanks
AmyUse the PAL DV Widescreen preset.
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
about 2 weeks ago I received my HP DV7TQE with Windows 7 64 Bit. First thing I did was create a "restore" backup media just in case for future use. I used a ScanDisk Cruzer 32GB Flash Drive (memory stick). The stick was in one of the USB 3.0 ports while I was creating my "restore" software. On Friday night I performed a test just to make sure my "restore" would work. Unfortunately it did not. I got "the boot selection failed because a required device is inaccessable" message. After some surfing on the Internet I found out that USB 3.0 should not be used to create a "restore" software. My question is why would HP leave this little detail out from the intructions provided on the laptop at the time I was creating this?
From what I have found out it is ok to make the media on a usb 3.0 port, you just cannot restore using a 3.0 port, it should work from a 2.0 port.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02906094&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us... -
How do I know which group and group counter used to create current estimate
Is there a way to know, if for a given set of materials, what groups and groups counters have been used to create the current cost estimate. Or for a given comboniation of material, group and group counter has been used to create a current cost estimate. I can look each up through displaying the cost estimate but I am looking for a quick way since the number of materials are in 100s.
I was wondering if there is a table I could look up to get the info.
Any help would be much appreciated.
RegardsThe name of the table that needs to be used is KEKO. I figured it out so I thought I would share
Edited by: NIK83 on Mar 7, 2011 10:16 PM -
BOM Explosion - special procurement type 52 (collective order)
In BOM explosion, special procurement type -> collective order (52) for the item is considered as phantom assembly. I wish to know the business reason for this. Any help please ??
hi Janardhan,
phantom assembly is the assembly which is not kept in stock rather it consumes directly.
Use of phantom assemblies are as below
Phantom assemblies are assemblies that have their own product structure, but whose assembly does not actually physically exist. The components of the phantom assembly are incorporated directly in the superordinate product. The product structure of the superordinate product contains a reference to the phantom assembly.
example - A car with music system.
During backflush, only the goods movement for the phantom assembly components are posted. The phantom assembly is marked as backflushed but does not trigger any goods movement.
Experts pl correct me if i'm wrong.
Regards,
Anil
Maybe you are looking for
-
Cdrtools package, support for nls/utf8 character sets
Hello ppl, I've been trying desperetly to burn a cd/dvd(k3b) with greek filenames and directory names. I ended up with file names like "???????????????????? (invalid unicode)" After a lot of searching, i managed to isolate and solve the problem. Ther
-
HT4623 my photo will not syc to my iphone
my photo will not syc to my iphone
-
I have lots of brushes which are stored in the presets folder in Photoshop CS5, as are my other presets. How and were can I copy these too, to use in CC. I have looked at the tutorials for Libraries but it seems not to cover what I want to do which i
-
Lost movies after sync. How do I retrieve them?
-
Errors converting indesign pdf to pdf/A-1a - any ideas what they mean?
Acrobat has to convert a tagged PDF 1.5 document generated by indesign to PDF/A1a but does not seem able to do this. If anyone could explain these errors to me: - Structured PDF : Type entry in a structure element not "StructElem" - Structured PDF :