Which driver to put in blacklist

hi i have
[phoenix@styx ~]$ lsmod | grep rt
rt2870sta             391186  0
rt2800usb               8822  0
rt2800lib              25777  1 rt2800usb
crc_ccitt               1079  2 rt2870sta,rt2800lib
rt2x00usb               6888  1 rt2800usb
rt2x00lib              23879  3 rt2800usb,rt2800lib,rt2x00usb
led_class               1779  1 rt2x00lib
mac80211              174591  3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211              123302  2 rt2x00lib,mac80211
lsusb
Bus 001 Device 005: ID 1740:9703 Senao EnGenius 802.11n Wireless USB Adapter
what driver do you think i have to put in blacklist ?
the wifi adapter works (it can connect to another network)
but when i make an airmon-ng (i want to connect my android phone)
i have
Interface            Chipset        Driver
wlan0                Unknown             rt2800usb - [phy0]
                                        (monitor mode enabled on mon0)
normally chipset should be rt2870/3070
thanks for your help
P.S. : system works when i boot withe Backtrack 4
P.P.S : i you have another idea to make a hot spot you are welcome

Hey, i have an identical conflict with my wifi card.
modify your /etc/rc.conf similar to this
MODULES=(!rt2800usb !rt2800lib !rt2x00usb !rt2x00lib)
If your 100% sure it should be using rt2870sta then blacklisting those above should do the trick.

Similar Messages

  • Which HDD interface for which drives?

    Hello,
    I have read Harm's and others' excellent advice on drive configuration, but am not sure about which drives to put on which interfaces.  Assuming an X99 motherboard has 2 M.2 PCIE sockets, 1 SATA Express port, 1 SATA Express controller with 1 port, 8 SATA 6 GBs, and possibly a PCT RAID card.  Which of these connectors would you use for which drive, and why?  (I suppose another way to ask this might be which hdd uses benefit the most from increased speed--OS, application, pagefile, media, etc?)
    Also, closely related, one thing I cannot discern from what I have read so far is where lies the point of diminishing returns. For a system used for a mix of Premiere/Photoshop/AE, using as HaswellE, 32Gb, and say a 980, how many drives and how much drive throughput is required to prevent HDD from being a significant bottleneck?
    Thanks for any thoughts!!

    Normally PCI-E slots are a premium for editing systems and config options so I don't recommend wasting those on NVMe drives or adapter cards. I would suggest the Sata ports for storage usage and a SSD OS drive for sure. A SSD cache drive is a good idea as well provided it's big enough. Normally you want a 256GB Cache drive if so.
    Eric
    ADK

  • BEA MS Sql server which driver to use?

    We have BEA weblogic 8.1 and want to work with sql server Which driver
    shoudl we use ?
    i believe driver is deprecated
    Bea talks about the new driver
    "WebLogic Server 8.1 SP1 includes a new JDBC driver from BEA for connecting
    to a Microsoft SQL Server database. The BEA WebLogic Type 4 JDBC MS SQL
    Server driver replaces the WebLogic jDriver for Microsoft SQL Server, which
    is deprecated. The new driver offers JDBC
    3.0 compliance, support for some JDBC 2.0 extensions, and better
    performance. BEA recommends that you use the new BEA WebLogic Type 4 JDBC MS
    SQL Server driver in place of the WebLogic jDriver for Microsoft SQL
    Server."
    Do we have to install sp1 or sp2 to work with this driver. How can we get
    sp1 ,
    Thanks,

    Where did the Driver file place?
    You can copy the driver file to the JAVA_HOME/lib
    folderDo not put that JDBC JAR in JAVA_HOME/lib.
    You should put it someplace close to your app and add it to the CLASSPATH when you compile and run?
    Geez, doesn't anybody think about a standard directory structure to use for their apps? Put it in a /lib directory with the rest of your app stuff. - MOD

  • Which drive is the boot drive?

    I installed a 2nd hard drive in my G4 dual 1ghz sometime around 2001. I'm now on a G5 and would like to pull the 2nd drive from the G4 and put it in a firewire enclosure to use with the G5. How can I tell which drive is the boot drive and which is the secondary drive? I kind of remember that the 2nd drive went in the lower bay but I'm not 100% sure. Any other caveats to pulling out this drive? Thanks in advance.
    Power Mac dual 1ghz    

    The system profiler should tell you the serial number of the hard drive, or type of hard drive when you select it in the IDE bus. Compare that with the label on the drive itself.
    Both bays can have boot drives, though typically master jumper drives are better able to boot than slaves on certain operating systems.
    You can tell the existing boot drive, because it is the first drive that appears in the upper right hand corner of the desktop if you view and arrange the desktop by kind.
    If you just want to transfer data over from a G4 to a G5, you may want to use Target Disk Mode:
    http://docs.info.apple.com/article.html?artnum=58583
    Note, if the G4 is the kind that can boot into Mac OS 9, set it as the Target machine. In addition, if it is running 10.2.2 or earlier it should be the target machine, because 10.2.2 and earlier don't understand the Journaled operating system which may be installed on your G5.

  • Which Driver for MS SQL-Server 2000

    Hello,
    i need to access a MS SQL-Server 2000 and want to ask which driver you think is the best one for this problem.
    I am not a big fan of using beta-Software, and i do not need the newest state-of-the-art features. Right now i also do not need Connection-Pooling.
    Only a few SQL SELECT/UPDATE-Statements nothing more.
    But maybe in not far away future, Conn-Pooling and Procedure-Calls could be interesting. And i think Type 3 or 4 would be the best decision.
    The Software will run on NT, but i do not want to use the JDBC/ODBC-Bridge, because it is so unbelievable slow.
    I am interested in WHICH DRIVER you USE, AND especially which drivers you DO NOT USE ANYMORE, and why.
    It would be great, if anyone could help me, finding the best solution.
    P.S.: The price of the driver: It would be good, when it is for free. But if you know a good commercial driver i am also interested in.
    P.P.S: Yes, i have searched for drivers under http://servlet.java.sun.com/products/jdbc/drivers. But there are 37 different Type 3/4 drivers.

    You can try the jtds project .Search for it in www.sourceforge.net. It is derived from FreeTDS JDBC driver. Both of them are Type 4 JDBC drivers. So far I have tried both of them a few years ago. And jtds is more updated (during those time, not sure what the status is right now)
    Or, you can get Microsofts own JDBC driver

  • Which driver on the Install DVD is for HFS+ read in Windows?

    I installed Windows 7 Enterprise x64 on my MacBook of course about a week before Snow Leopard was released and have already gone through the tedious, time consuming process of getting all of the Windows drivers working for Win7x64. I really don't want to go through installing all of the various drivers again one by one (especially since I JUST did this) until I see the MAC partition in my Windows side (BootCamp) if at all possible... so does anyone know WHICH driver it is that will allow the HFS+ partition read? I really don't want to mud up my fresh Win7 installation by re-installing every BootCamp driver from the AppleOS CD. Thank you guys in advance, I really appreciate the help.

    Yes Windows can, Leopard comes with the drivers for Windows to view HFS+. It does not need 3rd party software anymore as I have personally done this on another mac in the office. I went through and installed ALL drivers all at the same time though, so I don't know which one is the one that allows this. In Windows, it displays the MAC partitions as drive letters and you can read the partitions, you cannot write, just like NTFS.

  • 2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
    If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
    Do you have a complete-drive backup of your old system?
    Matt

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

  • HT1751 I copied my old itunes library from my pc on to a external hard drive and put it on my laptop. How do i merge it with my current itunes account on my laptop?

    I copied my old itunes account on my pc to an external hard drive and put it on my laptop. How do i merge my old itunes with my current account on my laptop?
    Thanks

    Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • Which driver to use in the BPM Configuration Steps?

    Hi,
    I´m in the BPM configuration steps and we will use BPM on a Weblogic Server, I´m in the step when you need to create to JDBC Data Sources for the Enterprise and Directory Databases, do you know which driver shoul I use? should it be XA o Non-XA?
    Thanx in Advanced!
    Kind Regards,
    Gerardo J

    Since there are no drivers, you can create your own, request one, use the Instrument I/O Assistant, or hope someone has one and posts it here. For help on creating one or requesting one, see the main Instrument Driver Network page. As long as you are familiar with the instrument and have the manual, creating a driver is not that hard.

  • Table in which if I put the delivery number ..I should get the HEADER TEXT

    Dear Members,
    I am checking for a table in which if I put the delivery number ..I should get the HEADER TEXT. Does such table exists or a Z report shoudl be created for this kind of setup.
    Regards,

    Hi,
    There are two Tables in which the texts will be stored
    One is STXH -
    TEXT HEADER
    other   STXL------- TEXT ITEM
    If you want to get the Header text then input the values in the table
    In STXH
    TEXT OBJECT     is    VBBK
    TEXT NAME      is      DELIVERY NUMBER
    TEXT ID             is       ZS01  ( this is the standard ID for the  Header note 1 )
    Now goto SE37 and give the Function Module READ_TEXT and maintain all the above details and get the TDLINE Which contains the TEXT of the Delivery
    regards,
    santosh

  • Where do I get a map transition like iMovie,  in which I can put a destination city

    Where do I get a map transition like iMovie,  in which I can put a destination city

    Tom
    I want you to know, Tom, that you are your only reason that I'm still using FCP X and not banging my head against the wall. I hope Apple is compensating you well.
    What do you mean by "export it and import it into FCP?" Neither program has an  export feature. I have already imported my iMovie project to FCP X with the map and it didn't come over correctly. Where the map should be  there is simply a slide saying, "title & subtitle."

  • How to identify which drive is the current boot drive?

    I have a PowerBook running Leopard, and I prefer to boot from the external drive. It's bigger and has my working files. The current internal drive is for future use, for when I have a replacement machine. I know how to specify the boot drive in Preferences, but sometimes the machine reboots without me. I don't know how to verify which drive I'm booted from. I changed the desktop background, so that once I'm logged in I can tell, but surely there is a more direct way to determine this. Isn't there?

    A simple option would be to select About this Mac from the Apple menu.

  • Apple usb jis keyboard in windows xp which driver to use

    hi,
    i bought the apple jis usb keyboard for my wife since it looked nice and was usb. it is supposed to be like standard 106/109 layout for japanese jis. However, I am not sure which driver to use in windows xp. xp will try to use the standard hid driver. I set it to microsoft 106/109 usb and while all the standard keys match up, the special language mode keys do not.
    Any help here? (ie. use alps usb japanese keyboard driver) or is there a downloadable driver?

    actually found a kernel mode driver called
    applek pro 1.8.x which will allow for this.. Anyone try it?
    thoughts?

  • Which Driver to Use?

    I have been using the Windows 7 x64 drivers with no problems, but i notice Daniel k's drivers located here ( http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485 ) and am now wondering if i should used it's Is it worth the swap or should i stick with official stuff?

    Re: Which Driver to Use?S jmacguire
    <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC "]http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC[/url]
    Will those drivers work with my PCI X-Fi platinum?
    Also, what do you mean install the creative drivers on top? Do you install the Daniel K drivers then the creative ones?
    Thanks for all the help you have provided to others so far.
    I am having SCP issues with an X-FI platinum on an EVGA 780i SLI motherboard (not running SLI) with a Q6600, 4gb of ram (in all 4 slots) and an 8800GTS on Windows 7x64 pro.

Maybe you are looking for