Which function? Agg level to Agg level

I want to be able to allow an Admin to plan Key Figures per Cost Center. Each Cost Center and Fiscal Period may have different key figures (planned hours).
I will then have a goal maintainer who will work with these planned hours at Employee Detail level. Using a MultiProvider to show employees and Actual Hours, I want to also show the planned hours as assigned to their cost center.
My question, how can I have these planned hours at Cost Center level be copied to every employee within the Cost Center? When creating the hours for cost center, it creates an entry in the Real-Time cube with "not assigned" employee.
example:
Cost Center 9999 Fiscal year/period 001/2007 - Admin sets Planned Goal to 15 hours for the entire cost center.
This creates an entry in the plan cube for 15 plan hours assigned to "not assigned" employee.
Then Goal Maintainer comes in viewing data through MultiProvider that contains employees actual hours. If this person is allowed to alter employee 11111 and 11112 in cost center 9999, I want both of these employees to show the assigned 15 hours for 001/2007.
What function would I use for this, and how do I set it up? I've tried many alternatives, but keep getting different errors.

Hi Gregor,
You're answer was a LOT of help, but I'm still having a few issues.
I ended up not using the characteristic relationship because the MD Attribute Cost Center is not always going to be the same as the cost center they are billing. I created a filter as I would in the query to filter Fiscal Year, FY Variant, Cost Center/Controlling area, as well as the doc/proj types to make sure we are only copying to employees with Client Chargeable hours.
My copy function is working Great if I am to copy from employee # to a single personnel number within this cost center.
I am unable to use * as the employee 'to' value (states * is an invalid character). I attempted to keep the 'to' value blank, as well as use the 'to' value "not" # (using less than/greater than character for not =, not allowing me to input this character in the forum) but this would fail stating invalid combination.
Any insight?
Edited by: Cote Adams on Oct 1, 2008 8:31 PM
Edited by: Cote Adams on Oct 1, 2008 8:32 PM
Edited by: Cote Adams on Oct 1, 2008 8:32 PM

Similar Messages

How to know on which time dimension level we are ?

Hello,
I would like to know is there a variable or a mean to know dynamically on which time dimension level we are in order to use that in a CASE WHEN clause ?
By using a sort of aggregation tables in which one of the column contains the name of the level, I could know on which level I am but I can't use that for drill down. What I mean :
Tab1 :
'Year' as typelevel, year
Tab2 :
'Month' as typelevel, year, month
In BMM, I have made one logical table with as Source tab1 and tab2 and as columns typelevel, year and month.
tab1 has in content column the year level
tab2 has in content column the month level.
So when in Answers I retrieve
typelevel, year
the result is : 'Year', 2008
and when I request : typelevel, year, month
the result is : 'Month', 2008, 1
But if I want to drill from year to month in order to have :
'Year', 2008
and then after drill
'Month', 2008, 1
it is impossible as a filter on typelevel='Year' is added on the month level, so it retrieves 0 columns.
If someone has an idea on how to do that it would be very great.
Thanks in advance for your help.

Hi Supriya,
OOTB I think you can use SharePoint designer, but I would suggest custom code to iterate to all pages, and get the lists that are associated with these pages.
http://stackoverflow.com/questions/633633/sharepoint-how-can-i-find-all-the-pages-that-host-a-particular-web-part
another one would be if those lists were never used and you can check for list with empty data.
I would use Get-SPLists to get all of the lists to check for zero items.
http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/15/use-windows-powershell-to-manage-lists-in-sharepoint-2010.aspx
http://sharepointrelated.com/2011/11/28/get-all-sharepoint-lists-by-using-powershell/
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Service Release (SR) - which Support Package Levels?

Hello,
I have a general question in terms of Service Releases of a SAP solution:
Is there an easy way to find out on which Support Package Level (or Support Package Stack) a Service Release (SR) of a SAP Solution (or NetWeaver itself) is based?
Can I get this information in the SAP Service Marketplace?
Example: mySAP <solution> SR1 is based on Support Package Level <nn> of component <comp1> and Support Package Level <nn> of component <comp2>.
Any hint is appriciated.
Thanks!
Heiko

Hi Heiko,
You can find information on the SPS and SR releases/version in the service
market place under NW2004S - Release Specific Information - Support Package
Stacks information. This page will tell you the following;
SPS 11 Calender Week 10, 2007 (delayed) expand/hide
Support Package Stack 11 was planned for calendar week 06 and is postponed until calendar week 10.
Planned Features
Please take a look at this preliminary list with the new features planned for Support Package Stack 11.
SPS 10 November 27th, 2006 expand/hide
Download
Download SP Stack 10
Information sources
SP Stack Guide 10
Release Notes SP Stack 10
SR2 December 4th, 2006 expand/hide
SAP NetWeaver 2004s Support Release 2 (SR2) is a new installation and upgrade version (a new set of DVDs) including corrections (and features) provided with SP Stacks 01 to 09. It is a significant step towards a simpler installation of SAP NetWeaver 2004s up to and including SP Stack 09.
Since SAP NetWeaver 2004s SR2 is based on SP Stack 09 the next SP stack to be applied will be SP Stack 10.
Support Release 2 was planned for calendar week 47 and is postsponed until calendar week 49.
SPS 09 September 5th, 2006 expand/hide
Download
Download SP Stack 09
Information sources
SP Stack Guide 09
Release Notes SP Stack 09
SPS 08 June 27th, 2006 expand/hide
Download
Download SP Stack 08
Information sources
SP Stack Guide 08
Documentation Patches -> SPS 08.
Release Notes SP Stack 08
SPS 07 April 11th, 2006 expand/hide
Download
Download SP Stack 07
Information sources
SP Stack Guide 07
Documentation Patches -> SPS 07.
Release Notes SP Stack 07
SR 1 April 7 th, 2006 expand/hide
SAP NetWeaver 2004s Support Release 1 (SR1) is a new installation and upgrade version (a new set of DVDs) including corrections (and features) provided with SP Stacks 01 to 06. It is a significant step towards a simpler installation of SAP NetWeaver 2004s up to and including SP Stack 06.
Since SAP NetWeaver 2004s SR1 is based on SP Stack 06 the next SP stack to be applied will be SP Stack 07.
Shipment
Please note that since the release of SAP NetWeaver 2004s SR 1 on April 7, 2006, SAP NetWeaver stand-alone customers who order SAP NetWeaver 2004s now receive the SAP NetWeaver 2004s SR1 software package instead. SAP NetWeaver 2004s SR1 will not automatically be shipped to customers who have already received SAP NetWeaver 2004s prior to this date.
SPS 06 Jan 31st, 2006 expand/hide
Download
Download SP Stack 06
Information sources
SP Stack Guide 06
Documentation Patches -> SPS 06.
Release Notes SP Stack 06
SPS 05 Dec 15th, 2005 expand/hide
Java part of Support Package Stack 05 was postsponed to December 15th.
Download
Download SP Stack 05
Information sources
SP Stack Guide 05
Documentation Patches -> SPS 05.
Release Notes SP Stack 05
The interesting bit is that SR1 was released in April; while SPS6 was available in
January. The same goes for SR2; released in December; while SPS9 was
available in September.
There is a gap of 3 months between the SPS was released and the SR is released
I assume that patches that have been released for the SPS are included in the SR
therefor a system that has SPS6 or SPS9 applied is not neccisarily the same as
SR1 or SR2.
Hope this helps...
Kind regards,
Walter

Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

You can only install games that are in the iTunes app store on your computer and the App Store app directly on the iPad - if there are games like those that you mention in your country's store then you can buy and install them. Have you had a look in your country's store ?

Which functional modules we can use to update the costs in WBS?

Hello friends,
I need to update the costs assigned to WBS elements at cost element level using TCode CJR2. Which function modules are available to do this?
Can you show me sample implementation for the same?
Thanks in advance,
Amol C.

You can't.
A UIImage object is a high-level way to display image data. You can create images from files, from Quartz image objects, or from raw image data you receive. The UIImage class also offers several options for drawing images to the current graphics context using different blend modes and opacity values.
Image objects are immutable, so you cannot change their properties after creation.

Which functions and features in Numbers are NOT exported correctly to Excel?

I wish to know EXACTLY which functions I use in a Numbers sheet WILL FAIL to export correctly to an Excel or Neoffice spreadsheet.
For instance, I created a Numbers spreadsheet using prolific use of the IFERROR function. However, when I EXPORT to XLS, all the cells that used the IFERROR function were replaced by the literal value of the cell. My IFERROR formulae were not EXPORTED as I had expected.
I note that some formulae were converted correctly in my EXPORTED spreadsheet: eg MAX, MIN, AVERAGE.
I understand that IFERROR was a function introduced recently to Excel, ie in the 2007 version. Consequently, I suspect that Numbers exports to a pre-2007 version of Excel. If so, which version?
I have found this list that shows which functions are compatable amongst various versions of Excel:
Excel Functions: Compatibility Reference (2010, 2007 & 2003). (n.d.). Retrieved from https://docs.google.com/spreadsheet/ccc?key=0AsHau4_IeCfwdG45c0VhcjBBUGNreVo2ZzN NRU1BT0E#gid=0
This list shows that, for instance, IFERROR exisits inb both Excel 2007 and Numbers-09. So why is IFERROR not exported?
Curmi, J. (n.d.). Summary of function in excel and numbers-09. Retrieved from http://curmi.com/blog/wp-content/uploads/2009/01/functions-in-excel-and-numbers- 09.pdf
Some examples of my use of ISERROR in Numbers are as follows:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
I use the above function to carry out the calculation ONLY IF a cell is non-blank and contains a number.
More questions
What are the rules that Numbers uses to convert to Excel?
Is Numbers converting to the 2003 version of Excel? ... or an earlier version? ... which version?
Why desn't Numbers advise me there were conversion errors or simplifications made?
eg: "Cell A33 Function IFERROR was exported to the cell value for Excel"
Is there a preference that I can select which version of Excel that Numbers will export to?
In the meantime, I must abandon Numbers and use NeoOffice!

Thanks,
I applied your suggested ISERROR transformation to examples such as:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
However, a caution for young players....
Certainly, the ISERROR function exports to .xls. However, it behaves differently in NeoOffice.
Items 1 and 2 function identically in the case of say, ranking a row in which some cells are blanks.
Item 3, when translated using ISERROR to =IF(ISERROR(C32-C88+1),"", C32-C88+1), results in "" (ie error is raised) in Numbers but yields figure 0 in NeoOffice when there is a blank in either of the cells.
I recall from programming school in the mid-1970s that using GOTO statements and On Error branch statements were not admissible as routine programming steps. In fact, we received an automatic fail grade if we used a GOTO or GOTO like construction. So, I have found a more programmatically elegant way to solve my problem: eg:
=IF(C88="","",C32-C88+1)
Curiously, earlier I found/suspect this does not work equivalently in Numbers and NeoOffice:
=IF(ISBLANK(C88),"",C32-C88+1)
When you try using ISBLANK you always get an intuitively unexpected result because ISBLANK ONLY gives TRUE when there is absolutely nothing in a cell. A Formula reference in the cell, even if the function result yields "", gives FALSE... because, according to the definition of ISBLANK the cell contains a formula.
As I tell my students, ALWAYS lookup the HELP on any function you use. ALWAYS test the function to see how it performs!.... and lesson 3: Always test your spreadsheet on different systems.... then hope!
FYI:
Here's a link to my Spreadsheet (Neoffice .xls) and a video explaining its use.
Team Contribution: Introduction (Prototype). (2013). Retrieved from http://www.youtube.com/watch?v=bj87FGLoplk&feature=youtube_gdata_player
I don't guaranteee this link for ever! ... and I continue to "tweak" it
https://www.dropbox.com/s/1jz7gzksejnbqo1/Team%20Contribution.xls

Which function module to delete job log?

Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log?
Thanks a lot.
Jack

try CALL FUNCTION 'BP_JOB_DELETE'
If you have used JOB_OPEN before the SUBMIT to create the job, you can automatically delete the job upon successful completion by setting the parameter DELANFREP = 'X' in the JOB_OPEN function call.. this way the user will only see the logas for cancelled/aborted jobs..
~Suresh
Message was edited by: Suresh Datti

Which Function Module is used for converting the DATE in BDC

HI,
Which Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

data : date like sy-datum.
data : odate(10) type c.
date = sy-datum.        " in format YYYYMMDD
CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
EXPORTING
   input         = date
IMPORTING
   OUTPUT        = odate         .
write:/ odate. "in ur format '.
1.
In ur itab make a field for date as 10 characters and use this Fm to store the date .
2. Pass the date as the charcter field to the screen and now check .

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

Which function does this?.

I have to do something like this......
How will i pass values to second query like this...
where empid in (1001,1002,1003,1005)
Which function does this....?. Please help me.
lost track of features of functions......done this 100 times
before....now not working.
Please help me ASAP. Thanks in advance.
<cfquery name="id_sel" datasource="#edsn#">
select empid
from employee
where age < 50
</cfquery>
<cfquery name="course_sel_q" datasource="#edsn#">
select benefit_desc
from benefits
where empid in (<cfloop query="id_sel" startrow="1"
endrow="#id_sel.recordcount#">
#valueList(id_sel.empid,",")#</cfloop>)
order by empid
</cfquery>

quote:
Originally posted by:
jdeline
You're making it too complicated. See code below. It creates
a comma-delimited list for use in your WHERE clause.
Edit: fixed bad ValueList)( ).
Too complicated? It's a simple join for goodness sakes. It's
also more efficient because it only uses one trip to the database
to get the data.

Which function is used for adding days to given month

which function is used for adding days to given month

Hi Jagrut,
Good ... Check out the following examples
Get a date
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
 anzahl_jahre = 1
 anzahl_monate = 2
 anzahl_tage = 3
 datum_ein = '20010101'
IMPORTING
 datum_aus = l_new_date.
 Result:
 l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
Hollidays
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
 lc_holiday_cal_id like scal-hcalid default 'CA',
 ltab_holiday_attributes like thol occurs 0 with header line,
 lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
 date = ld_date
 holiday_calendar_id = lc_holiday_cal_id
 WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
 HOLIDAY_FOUND = lc_holiday_found
tables
 holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
 CALENDAR_BUFFER_NOT_LOADABLE = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_ID_MISSING = 5
 HOLIDAY_CALENDAR_NOT_FOUND = 6
 OTHERS = 7.
if sy-subrc = 0 and
 lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK

In which function i should set rendered property of components

Hi
Thank you for reading my psot.
it is really making me mad.
can some one tell me which function of a backing bean i should use to set rendered property of some components ?
i tried all of them and none of them seems to apply the rendereing propretiy.

It is easy to find out
Add a message group to the Page. Then in each method add
info("At method <method name>");
Run the application and see the results.
- Winston
http://blogs.sun.com/roller/page/winston?catname=Creator

Which function module or class is used to import UNICODE files

Hello all,
Does anyone know which function module or global class is used to import files when the UNICODE check for the FILE port is ON?
Thanks
Ed Baker

Hi,
According to your requirement, you can prepare report through S_PH0_48000513 - Ad Hoc Query , you can get percentage from IT0007 in Ad Hoc query. first decide how many fields you want and then choose in selection criteria and generate the report.
Thanks,
Nirali P.

SRM7.0, ext.classic - Which function is used to create PO in SRM?

Hello,
does someone of you know, which function will be used to create a PO in SRM out of a SC in an extended classic scenario?
How can the creation of the SRM PO be debugged?
Kind regards,
Thomas

Hello,
Local PO creation occurs in BBP_PD_PO_CREATE. However, this process occurs in background and if you set an external breakpoint while ordering the cart, it won't stop.
You can create a cart in held status, take its header GUID, set a BP at BBP_PD_PO_CREATE and execute BBP_PD_SC_TRANSFER to transfer the cart, providing the header cart GUID.
Regards,
Ricardo

How to find which function module write the relevant idoctype?

Dear All,
how to find which function module write the relevant idoctype?

Hi,
Generally the function modules of the idoc types are having a naming convention as IDOC_INPUT for inbound processing and IDOC_OUTPUT for outbound processing followed by the idoc type name
for example : For IDOC type ORDERS
the inbound function module will be IDOC_INPUT_ORDERS and for outbound IDOC_OUTPUT_ORDERSP
In this way you can find the function module for a particular IDOC
P.S: Hope this is what you have asked for
Regards
Sarves

Which function creates an activity in CRM?

Hi,
We would like to create activities in CRM through a BAPI-like function but we can't seem to find a suitable one. Do you know which function / class method is used to create new activities in CRM ?
Thanks in advance,
George

Hi,
Please have Look into the below LInk
Using BAPI_ACTIVITYCRM_CREATEMULTI.
[Link|Re: Creating Activities Programmatically in CRM]
Hope it will be HelpFul
Thanks
kalyan

Which function? Agg level to Agg level

Similar Messages

Maybe you are looking for