Which hard drive to choose when a hard drive failed from mirrored raid

this is my mirrored raid set up from 4 ext HD to make a total of 2 mirrored ext HD raids. In one set, a HD is out of sync and has failed. I chose auto rebuild when I create the raids but it did not occurred. question-Which HD do I chose to rebuld when I use disk utility? Please see picture below. thank you.

any suggestion? or am i in the wrong discussion board.

Similar Messages

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Which client should I choose when i do client copy during PI post-install?

Hi,gurus:
Which client should I choose to be the source client when i do client copy during PI post-install?
000 or 001?are there any differences?Thanks!

hi
Do client copy with client 000 and user sap* only .
001 is the copy of 000 .
rgds,
Arun

My iphoto library (located on an external hard drive) was open when the hard drive was accidentally disconnected. We plugged it back in, but the library is frozen. Any suggestions on what I can do without corrupting/losing my iphoto library?

The cable to the external hard drive that houses my iphoto library was accidentally disconnected while the library was open and up on the screen. We plugged it back in, but now the screen is frozen. Has anyone experienced this before? If I force quit, will I corrupt and lose access to the library on the external hard drive?

Shutdown the Mac. Disconnect and power off the external drive (if it has its own power supply). Reconnect the external drive and power on (if applicable). Boot Mac. If the external drive is not reading properly, open Disk Utility, select external drive, run Repair Disk.

HT4623 I have a new handset as my previous one was damaged. With regards to backing everything which option do I choose when backing up, set up as a new iphone or, restore from this backup iphone?

I have a new hanset as my previous one ws damaged and everything was lost. When backing up which option should I use "set up as a new iphone or, restore from this , back up Jo's iphone"..
Thanks.

You may do whatever you like.
If you want to set it up using the backup of your old iphone then choose that.
If you do not then choose as new.

Updated my iphone 3gs to the ios4.3.5. Now the mail application doesn't function properly. App doesn't sync mail from server - deleting mail hardly works now. When the phone downloads messages from the mail server, it bounces/flashes between accounts too

I recently upgraded to Lion and then updated my iphone to iOS 4.3.5. Now my mail app on the phone seems all messed up. When I check mail, it pulls down mail from the server but I have to go into each individual account to make that happen but even then the view automatically bounces from one mail account to another but never to the Microsoft Exchange server. It also doesn't let me delete mail

I have wasted much time trying different combinations to have push and gmail "send mail as". I guess I have tried so much because it seems like a no brainer.
If you set up as exchange you can at least add in the extra comma and address, but it disappears when you go to send an email.
very frustrating indeed. my solution is to use the gmail app for notifications of new email.

Installing printer driver in Classic when ibook won't boot from OS 9-help!

Hi all. Thanks in advance for reading. I posted this in the ibook section but upon doing more searching, I think this forum is the better one. Hope that's okay to do.
I am trying to print an old financial file for tax purposes from Classic. No print drivers are installed in the OS 9 environment (chooser only shows default OS 9 apple printers).
I tried adding a printer in OS 9 through the chooser and my network printer did not show up. Support site at apple advised an install of the driver in OS 9.
When I try to install an HP print driver in OS 9 (already installed in X), I am flummoxed because I can't get my ibook 12" to startup in OS9 (it's not an option in startup disk and the Apple support site tells me that my newer computer can't startup in OS 9).
I've tried to install in the Classic environment without booting from it. When I am running Classic and I insert the disk with printer drivers, it's only seen by the OS X environment. When I start the installer, the only option is on my hard drive as viewed by OS X.
Other than laying out bucks to purchase a new version of Quick Books (just to print out old documents), how can I enable printing from Classic? Is there a roundabout way to install the printer drivers? HP site offered no real help. Thanks for any assitance. Lori
ibook G4 12" Mac OS X (10.3.9) HP Photosmart 2710

Hi John,
Thanks for your suggestion. There is only one HP installer. It must be a smart installer since it can work for OS 9 or X. Unfortunately, I can't find a way to make it "dumb" again.....selecting a custom install doesn't allow me to choose operating system or destination for install. Any other ideas? Thanks.
Lori

Virtualbox on windows host: which video driver to choose ?

Hello all:
i have installed archlinux on my vista box through vbox
well next step is to install X
but i dont know which video driver to choose
when i do lspci |grep VGA
i get
VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox ...
so which driver does this correspond ?
my laptop has a ATI card

thanks but can you tell me how to install that guest additions ?
i noticed there's a menu item for that
but nothing happens when i click it

Firefox will not pin to taskbar when installed to C drive, but will when installed to D. Why?

I used to have Firefox installed to the D drive, which used to be the C drive. New install of windows, and half a year later, was running firefox off of the D drive. I upgrade to Firefox 4, and I want to switch it to my C drive, which is a SSD. When I open firefox 4 from C (runs fine), and try to pin it, it says it pins it. I close it, and it says that the file has been deleted or moved and that no such file exists on the D drive location. I right click on the .exe file in the C drive and pin it there, and that works, but every time I open it, it opens new programs next to it on the task bar. Pin those and try to use them and it gives the same error. Why in the world would this happen?

I have exactly the same issue. After FF upgraded on its own to version 5, it won't open from start menu, taskbar, desktop icon, or even by pressing firefox.exe in program files directory. It does so by pressing a link at msn messenger, inside Outlook etc.
Disabling all addons, didn't help. Moreover, I can't start FF in safe mode or start profile manager (Start > Run> firefox.exe -ProfileManager).
OS: Windows 7 64bit
Windows Event Viewer entry details:
Faulting application name: firefox.exe, version: 5.0.0.4183, time stamp: 0x4df95302
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8c724fa6
Faulting process id: 0xc0c
Faulting application start time: 0x01cc37fe2fae7e8b
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: 6e7f03eb-a3f1-11e0-8f4d-a4badb0238f6

What's the best way to upgrade a mirrored RAID drive?

I have two 3TB Firewire 800 drives which are almost full which I'd like to upgrade. The drives are configured as striped drives using the Apple (OS-X) RAID utility in disk utility. Is it possible to configure three drives as RAID 5, or four drives as RAID 10, or am I better off just going for a couple of larger drives and staying with the striped configuration? The drive is mainly used for an iTunes library, iMovie content and Aperture vaults so speed isn't that critical.
Thanks in advance

You can convert to a striped RAID but not without erasing the drives. The only ways to make a larger mirrored RAID are:
Buy two more identical drives. Make two sets of Striped RAIDs which in turn can be configured into one mirrored RAID by mirroring the two striped RAIDs.
Buy two larger drives, configure as a mirrored RAID, copy the data from the old RAID to the new one, or have two mirrored RAIDs.
Regardless of what you do you may end up erasing the data from the present setup if it involves breaking the RAID. If you break a mirrored RAID the data on each drive will remain intact until you re-use the drives in some other manner such as converting the mirrored RAID to a striped RAID.

TS1967 In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6 i do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from

In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6. I do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from losing any files? Also, does anyone know how to search the iTunes store by price? I'm particularly interested in movies and audiobooks... Thanks

iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first. Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one? The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless). To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes. To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
Realize what you are talking about is not "backup". Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded.

I have a MacPro5,1, Quad-Core Intel Xeon, 2 processors running at 2.4 GHz. I am running OSX 10.6.8. I installed Yosemite on another drive. When I choose Restart in Yosemite it shows my 10.6.8 hard drive. But when I click Restart in 10.6.8 it does NOT

I have a MacPro5,1, Quad-Core Intel Xeon, 2 processors running at 2.4 GHz. I am running OSX 10.6.8. I installed Yosemite on another drive. When I choose Restart in Yosemite it shows my 10.6.8 hard drive. But when I click Restart in 10.6.8 it does NOT show my Yosemite drive. I used to know how to get the startup screen that showed multiple drives but I've forgotten it. How do I do that?

Press Option at startup.
(124807)

I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes.

I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes. The hard disk was replaced recently in order to gain extra memory. Is there some sort of limit set up from the original hard drive causing this problem?

Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
Once this process has been completed restart your computer.
Utilities & info regarding checking your HD space:
Where did my Disk Space go?
Slimming your hard drive
Seven ways to free up drive space
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.
Disk Inventory X
WhatSize
SpaceControl

Will my hard drive get wiped when upgrading from tiger to leopard?

hello, i have a dumb question... i bought a G5 about a year ago and i would like to upgrade to leopard. i've never upgraded before, seeing as how this is my 1st mac. i was wondering if it will wipe the hard drive when i install leopard?
i was going to buy an external hard drive to back up my files (and wanted time machine, but it's only compatible with leopard)... so i guess my questions are 1) will it wipe my hard drive when installing leopard? and 2) can anyone recommend a good external hard drive with LOTS of space?
thanks!

imegs,
When you install Leopard, you should be presented three options:
1. Upgrade
2. Archive and Install
3. Erase and Install
Most folks will not recommend the Upgrade options...too many stories of 'things' not running properly after an upgrade (like filling most potholes on a road, rather than repaving the road).
The Archive and Install option will put a new installation of Leopard on your machine, while saving all your programs and settings. I recommend this option.
Erase and install does just that- it will erase your entire HD and then install Leopard on it. Do not use this option unless Archive and Install does not work
Which ever option you choose, I highly recommend getting an external HD (firewire preferred), and backup your data to it. I'd recommend downloading Carbon Copy Cloner, and making a bootable clone of your internal HD, so that if something really goes wrong, you can at least get back to where you began (like if the power fails during a portion of Leopard loading).
I've got a couple of Western Digital HDs, and they've been trouble free. One's a 250Gb, and the other's a 500Gb. Both have Firewire and USB connections... Pretty reasonably priced at Costco. You can back up your data to it, and then, when everything seems to be running to your satisfaction, you an erase the external, and turn it into your "Time Machine" HD.
Hope this helps,
Bob

Hard Drive not recognized when booting from XP CD on docking station

The hard drive on my X60 failed to the point where I couldn't recover and reinstall the image. I have backups of all my data and a docking station so I didn't sweat it. Bought a new drive and installed it and this is when the trouble began.
I created an XP CD with SP2 slipstreamed in to make sure I have the latest drivers. I boot from XP CD and everything works until I try to install Windows. According to the installation CD there is no drive installed!
I reinstalled the drive to make sure and this time I booted off of Ubuntu Linux which installed flawlessly. That leads me to believe that there is a driver problem with Windows.
I need help! I would like to install Windows on the machine but nothing I've tried works.

edgardo wrote:
According to the installation CD there is no drive installed!
Standard Microsoft XP SP2 does not come with any SATA device drivers.
You have two options:
Go into the T60 BIOS and switch the SATA controller mode away from AHCI to "IDE" mode (or pehaps its "legacy" or "compatibility" mode - I forget what specific term is used in a ThinkPad BIOS).
Find the SATA device driver for XP (it's probably in the Intel Chipset driver download) on the Lenovo X60 support web site, download it and install it using the additional driver installation option which is offered right at the start of an XP install.
If you chose option 1, remember to switch the SATA controller back to AHCI mode in the BIOS after you have installed the SATA device driver.
Cheers,
Bill
Message Edited by billbolton on 03-09-2008 02:11 PM
I don't work for Lenovo

Which hard drive to choose when a hard drive failed from mirrored raid

Similar Messages

Maybe you are looking for