Which is the best approach to upload customer master data?

Hi Everyone,
I have to load customer master data which is extracted from ecc by using generic data source(view) when i try to trigger DTP it is showing error message as duplicates because the customer has two sales area ,two person number and two consumernumber and four partner functions.
So i tried to make all these as compounding attributes but the length is exeeding 60 for these attributes so how can i implement this.can i implement hierarchy's?
Please give me any suggestions.
Thanks and Regards,
G.Kavyasree

Hi Yogesh,
The issue is not resolved yet.If the length is manageable in compounding attributes.please suggest me the solution.
yes ,by enhancing two data sources 0customer_attr and 0customer_sales_attr i can meet my client requirement .but i dont know how to join these datasources based on customer number in bi (i.e customer genral data from 0customer_attr datasource and sales area data from 0customer_sales_attr datasource ) and generate a report on these two datasources data.
my report should look like this .
customer_id   firstname      city      country   sales_org distribution_channel division telephone
100                 mary       newyork    us          1010                     10                    10       +1xxxx456
100                 mary       newyork    us          1010                     20                    10       +1xxxx457
100                 mary       newyork    us          1010                     20                    20       +1xxxx433
101               richard       texas        us          1010                     10                    10       +1xxxx351
Please provide your valuable suggestions.
Thanks,
Kavya

Similar Messages

Which is the Best way to upload BP for 3+ million records??

Hello Gurus,
we have 3+million records of data to be uploaded in to CRM coming from Informatica. which is the best way to upload the data in to CRM, which takes less time consumption and easy. Please help me.
Thanks,
Naresh.

do with bapi BAPI_BUPA_FS_CREATE_FROM_DATA2

Outbond interface programme to upload customer master data.

Hi experts,
i need to develop an outbound interface programme to upload customer
master data,which will be received from sap and posted to web methods using
standard function mudule.can any one help me?

Hi,
Hi,
Primary you should have Message type, Idoc type and Function module or Report to process Outbound interface.
If your's is an Customized Process, then follow this.
1. Create Message type in we81.
2. Create segments in We31
3. Create Idoc Type in WE30.
4. Assign Message type to idoc type in WE82.
5.Create an Partner profile in WE20.
6.If you are creating an function Module create it in SE37.
7. Assign it to process code in WE41.
8. Charactersitics of FM in BD51.
9. Assign FM and IDoc And Message type in WE57.
<b>ALE IDOC</b>
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards

How to maintain the e-mail field in customer master data

Hi to all,
i need to do the field e-mail obligatory in the customer master data when i create a new customer(transaction FD01), but in customizing and in the user exit SAPMF02D this field is not present in the various structure/tables enabled (the table is ADR6 but not is in the list).
How i can do? Thanks in advance for any reply!!

Dear,
Check the Functional Module through SE37 : BPAR_M_FI_MODIFY_EXECUTE_NEU
And also check the Note: 703094.
Hope it will solve.
Regards,
Kishore K
Edited by: kishore babu on Dec 21, 2009 3:38 PM

Version control for PL/SQL. Which is the best approach?

We are developing a quite complex system which involves several
pl/sql packages, some triggers and stored procedure. We have a
version control system (StarTeam) in which we can store the
history of each change at our pl/sql code.
The problem is: which is, in your opinion, the best way to "mark"
a version in pl/sql? For example I putted a costant in a package
interface named "Version=1" which I increment for each new
release; but what about trigger and stored procedure? I need a
system, as simple as possible, which allows a customer to query
the database and tell us "which version" of the overall system
(package+trigger+proc) he/she has.
Thanks in advance
Nicola Farina

Most version control systems have special keywords that can be
inserted into the text. In Visual SourceSafe the following can
be added as part of your packages, triggers etc.
-- $Logfile: /LMES+/LMES_db/packages/batch.body $
-- $Revision: 4 $
-- $Date: 01-09-03 12:33 $
The benefit of this is that the version control system maintains
the file name, version number, date etc. You do not have to
remember to update them!
Then you can create a procedure to retrieve the information from
all_source/user_source.
Bo Pedersen

Custom fields to the sales area tab of customer master data

Hi Guys,
i have one requirement, where i need to add Zfields to the Sales tab in sales area data of customer master. Can somebody give me steps how to do it? do we need to do screen programming or just appending KNVV so that functional consultants can do configuration based on account group?
help would be appreciated
Thanks in advance
Siva

Hi,
.First in IMG - Enterprice Structure - Definition
Create the Organisational Units you want to use
2.Then In Enterprise structure - assignment
Setup the sales areas you want to use in SD
Then go to XD01/ VD01 and create a new customer to whom you want to sell goods & service thr a particular sales area which you have already set up in IMG.
YOu can create a customer master for only those sales areas which you have created in Step 2 above.
Then create a sales document type VOV8 and then assign sales document type to sales area in which you want to use.
IMG-Sales & distributin-sales-sales document-sales doc header
Do all other assignments like item category determination, schedule line category, pricing procedure determination etc
and then you can cretae a sales document using the particular sales area.
<b>Reward points</b>
Regards

What is the best approach/tools/methodolgy to validate data in SSIS

Hi,
I have implemented ETL packages for more than 200 tables . I logged the row count as a first step for testing. Now i would like to implement automation/validate data using test cases.
Being a single resource to do all this process is little difficult for the give time frame:(
Could you please guide me for effective testing scenarios(automation technique) with optimum effort?

I have a script that among all other things does
dtexec.exe package_name /Validate
Other than that, there is a grater danger down the road from schema changes.
Arthur My Blog

Best approach for uploading document using custom web part-Client OM or REST API

Hi,
Am using my custom upload Visual web part for uploading documents in my document library with a lot of metadata.
This columns contain single line of text, dropdownlist, lookup columns and managed metadata columns[taxonomy] also.
so, would like to know which is the best approach for uploading.
curretnly I am trying to use the traditional SSOM, server oject model.Would like to know which is the best approach for uploading files into doclibs.
I am having hundreds of sub sites with 30+ doc libs within those sub sites. Currently its taking few minutes to upload the files in my dev env. am just wondering, what would happen if the no of subsites reaches hundred!
am looking from the performance perspective.
my thought process is :
1) Implement Client OM
2) REST API
Has anyone tried these approaches before, and which approach provides better performance.
if anyone has sample source code or links, pls provide the same
and if there any restrictions on the size of the file uploaded?
any suggestions are appreciated!

Try below:
http://blogs.msdn.com/b/sridhara/archive/2010/03/12/uploading-files-using-client-object-model-in-sharepoint-2010.aspx
http://stackoverflow.com/questions/9847935/upload-a-document-to-a-sharepoint-list-from-client-side-object-model
http://www.codeproject.com/Articles/103503/How-to-upload-download-a-document-in-SharePoint
public void UploadDocument(string siteURL, string documentListName,
string documentListURL, string documentName,
byte[] documentStream)
using (ClientContext clientContext = new ClientContext(siteURL))
//Get Document List
List documentsList = clientContext.Web.Lists.GetByTitle(documentListName);
var fileCreationInformation = new FileCreationInformation();
//Assign to content byte[] i.e. documentStream
fileCreationInformation.Content = documentStream;
//Allow owerwrite of document
fileCreationInformation.Overwrite = true;
//Upload URL
fileCreationInformation.Url = siteURL + documentListURL + documentName;
Microsoft.SharePoint.Client.File uploadFile = documentsList.RootFolder.Files.Add(
fileCreationInformation);
//Update the metadata for a field having name "DocType"
uploadFile.ListItemAllFields["DocType"] = "Favourites";
uploadFile.ListItemAllFields.Update();
clientContext.ExecuteQuery();
If this helped you resolve your issue, please mark it Answered

Which is the best way for creating video placeholders in AE?

I should create some video placeholder for AE animation, but I am not sure which is the best approach to do that.
I found some tutorials on the web where is explained how to create basic placeholders in AE, but I want to do something better.
Could I create some placeholder even in Photoshop? And after that to import this psd files into AE.
I saw some intersting placeholders on Videohive but I don't know how to create something similar?
Any help?
Regards!

Any layer may be replaced with new footage by simply selecting the layer you want to replace in the composition, then selecting the new footage in the project panel, then holding down the Alt/Option key and dragging the new footage to the composition.
If you want to automate the process of replacing footage you'll have to use a script.
If you want to use a project as a template then simply copy the template file in it's folder and paste it into a folder that contains the same structure as the template. IOW, the folders should look like this:
Template Project
     >template.aep
     >Footage
New project
     >copiedtemplate.aep
     >Footage
Your footage has to have the same filename as the original template project.
You can also save an AE project as a template (aet) project. That's what they are doing on siges like Video Hive. The template isn't easily overwritten so it maintains the work. Then you simply add your footage using the first technique that I talked about.

How to upload different views of customer master data using LSMW-IDOC

I need to upload customer master data using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.

convinient is the method that you can handle.
but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
the data can be in one source file, but need then to be maintained in a certain way
Example1: all data in 1 structure
GD1 - CC1 - SO1
GD1 - CC2 - SO2
GD1 - CC2 - SO3
in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
Example2: all data in 3 sturcures but one file
GD1
.CC1
.CC2
..SO1
..SO2
..SO3
Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
FILE General data:
GD1
GD2
GD3
file Compamy code data:
CC1
CC2
CC3
file Sales org data:
SO1
SO2
SO3
LSMW is flexible and can handle each of this scenarios, are you flexible too?

Query in customer master data upload ....?

Hi Guru's,
I am uploading the customer master data from presentaion server to customer tables using functional module SD_CUSTOMER_MAINTAIN_ALL.
while check the Function module separatly and it working properley and i am able to ctere customer...
and i am using the same function module in the program i am unable to upload ..could please check and let me know where i am doing mistake in the below program logis..and values also moving properly before calling function module..while calling the functinal module the controle comming out of the loop and program went to dump i am able to see the message in dump as like this(it may helpfull for resolve):
Name of function module...............: "SD_CUSTOMER_MAINTAIN_ALL"
Name of formal parameter..............: "O_KNA1"
Technical type of actual parameter....: "C"
Technical length of actual parameter..: 20 bytes
Technical type of formal parameter....: "u"
Technical length of formal parameter..: 3634 bytes
Name of formal parameter at caller....: "O_KNA1"
*& Report ZERP_CUSTOMER_CREATE_UPLOAD
REPORT zerp_customer_create_upload.
PARAMETERS:p_files        TYPE string.
*DATA :xkunnr(10)      LIKE kna1-kunnr. "unique KUNNR
DATA: gs_i_kna1           TYPE kna1,
      gs_i_knb1             TYPE knb1,
      gs_i_knvv           TYPE knvv,
      gs_return           TYPE bapireturn1,
      gs_i_bapiaddr1      TYPE   bapiaddr1,
      gt_t_xknvi          TYPE STANDARD TABLE OF fknvi,
      gwa_t_xknvi         TYPE fknvi,
      gt_t_xknbk          TYPE STANDARD TABLE OF fknbk,
      gwa_t_xknbk         TYPE fknbk,
      gt_t_yknvp          TYPE STANDARD TABLE OF fknvp,
      gwa_t_xknvp         TYPE fknvp.
TYPES:BEGIN OF gty_itab1,
      abc(305),
      END OF gty_itab1.
DATA: gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
      gwa_itab1 TYPE gty_itab1.
TYPES :BEGIN OF gty_itab2,
       ktokd(4),        "customer account grp      kna1
       kunnr(10),       "customer                  kna1
       name1(35),       "name1                     kna1
       sortl(10),       "sort filed                kna1
       stras(35),       "house number and adres    kna1
       pstlz(10),       "postal code               kna1
       ort01(35),       "city                      kna1
       land1(3),        "country                   kna1
       telf1(16),       "tele phone no             kna1
       telfx(31),       "fax num                   kna1
       kukla(2),        "cust classificaion        kna1
       bukrs(4),        "company code              knb1
       akont(10),       "reconcilation acct        knb1
       vkorg(4),        "sales org                 knvv
       vtweg(2),        "distr chan                knvv
       spart(2),        "division                  knvv
       zterm(4),        "terms of payment          knvv
       bzirk(6),        "sales district            knvv
       vkbur(4),        "sales office              knvv
       vkgrp(3),        "sales grp                 knvv
       kdgrp(2),        "cust grp                  knvv
       waers(5),        "currency                  knvv
       konda(2),        "price grp                 knvv
       kalks(1),        "pricing procedure assign knvv
       lprio(2),        "delivery plant            knvv
       vsbed(2),        "shipping conditions       knvv
       vwerk(4),        "delivering plant          knvv
       inco1(3),        "inco1                     knvv
       inco2(28),       "inco2                     knvv
       kkber(4),        "cred control area         knvv
       ktgrd(2),        "acc assgn grp             knvv
       taxkd(1),        "tax classification 4 cust knvi
       bankn(18),       "bank account number       knbk -
        xkunnr(10),
       END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
      gwa_itab2 TYPE gty_itab2.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_files
    filetype                = 'ASC'
TABLES
    data_tab                = gt_itab1
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_itab1 INTO gwa_itab1.
gwa_itab2 = gwa_itab1-abc(305).
APPEND gwa_itab2 TO gt_itab2.
ENDLOOP.
LOOP AT gt_itab2 INTO gwa_itab2.
SPLIT gwa_itab2 AT ',' INTO gwa_itab2-ktokd
                              gwa_itab2-kunnr
                              gwa_itab2-name1 gwa_itab2-sortl
                              gwa_itab2-stras gwa_itab2-pstlz
                              gwa_itab2-ort01 gwa_itab2-land1
                              gwa_itab2-telf1 gwa_itab2-telfx
                              gwa_itab2-kukla gwa_itab2-bukrs
                              gwa_itab2-akont gwa_itab2-vkorg
                              gwa_itab2-vtweg gwa_itab2-spart
                              gwa_itab2-zterm gwa_itab2-bzirk
                              gwa_itab2-vkbur gwa_itab2-vkgrp
                              gwa_itab2-kdgrp gwa_itab2-waers
                              gwa_itab2-konda gwa_itab2-kalks
                              gwa_itab2-lprio gwa_itab2-vsbed
                              gwa_itab2-vwerk gwa_itab2-inco1
                              gwa_itab2-inco2 gwa_itab2-kkber
                              gwa_itab2-ktgrd
                              gwa_itab2-taxkd
                              gwa_itab2-bankn.
*moving files values from ITAB2 work area to global structure related to FM.
gs_i_kna1-ktokd   = gwa_itab2-ktokd.
gs_i_kna1-kunnr   = gwa_itab2-kunnr.
gs_i_kna1-name1   = gwa_itab2-name1.
gs_i_kna1-sortl   = gwa_itab2-sortl.
gs_i_kna1-stras   = gwa_itab2-stras.
gs_i_kna1-pstlz   = gwa_itab2-pstlz.
gs_i_kna1-ort01   = gwa_itab2-ort01.
gs_i_kna1-regio   = gwa_itab2-land1.
gs_i_kna1-telf1   = gwa_itab2-telf1.
gs_i_kna1-telfx   = gwa_itab2-telfx.
gs_i_kna1-kukla   = gwa_itab2-kukla.
gs_i_knb1-bukrs   = gwa_itab2-bukrs.
gs_i_knb1-akont   = gwa_itab2-akont.
*I FOR GOT TO INCLUDE THE ZTERM VALUE IN EXCELL SHEET SO INCLUDED HARD CODE HERE
gs_i_knb1-zterm   = '0001'.
gs_i_knvv-vkorg   = gwa_itab2-vkorg.
gs_i_knvv-vtweg   = gwa_itab2-vtweg.
gs_i_knvv-spart   = gwa_itab2-spart.
gs_i_knvv-zterm   = gwa_itab2-zterm.
gs_i_knvv-bzirk   = gwa_itab2-bzirk.
gs_i_knvv-vkbur   = gwa_itab2-vkbur.
gs_i_knvv-vkgrp   = gwa_itab2-vkgrp.
gs_i_knvv-kdgrp   = gwa_itab2-kdgrp.
gs_i_knvv-waers   = gwa_itab2-waers.
gs_i_knvv-konda   = gwa_itab2-konda.
gs_i_knvv-kalks   = gwa_itab2-kalks.
gs_i_knvv-lprio   = '02'.             "gwa_itab2-lprio.
gs_i_knvv-vsbed   = gwa_itab2-vsbed.
gs_i_knvv-vwerk   = gwa_itab2-vwerk.
gs_i_knvv-inco1   = gwa_itab2-inco1.
gs_i_knvv-inco2   = gwa_itab2-inco2.
gs_i_knvv-kkber   = gwa_itab2-kkber.
gs_i_knvv-ktgrd   = gwa_itab2-ktgrd.
gwa_t_xknvi-tatyp = 'UTXJ'.          "HARD CODE
gwa_t_xknvi-aland = 'US'.            "HARD CODED
gwa_t_xknvi-kz     = '0'.             "HADR CODE
gwa_t_xknvi-taxkd = '0'.             "gwa_itab2-taxkd.
APPEND gwa_t_xknvi TO gt_t_xknvi.
gwa_t_xknbk-bankn = gwa_itab2-bankn.
APPEND gwa_t_xknbk TO gt_t_xknbk.
gs_i_knb1-lockb          = 'X'.
gs_i_knvv-kzazu          = 'X'.
gs_i_knvv-kztlf          = 'X'.
gs_i_knvv-perfk          = 'X'.
gs_i_knvv-prfre          = 'X'.
gs_i_kna1-spras          = 'EN'.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
   EXPORTING
     i_kna1                              = gs_i_kna1
     i_knb1                              = gs_i_knb1
     i_knvv                              = gs_i_knvv
I_BAPIADDR1                         =
I_BAPIADDR2                         =
I_MAINTAIN_ADDRESS_BY_KNA1          = ' '
I_KNB1_REFERENCE                    = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE       = ' '
I_NO_BANK_MASTER_UPDATE             = ' '
I_CUSTOMER_IS_CONSUMER              = ' '
I_RAISE_NO_BTE                      = ' '
PI_POSTFLAG                         = ' '
PI_CAM_CHANGED                      = ' '
PI_ADD_ON_DATA                      =
I_FROM_CUSTOMERMASTER               = ' '
IMPORTING
e_kunnr                             = xkunnr
o_kna1                              = xkunnr
E_SD_CUST_1321_DONE                 =
   TABLES
T_XKNAS                             =
     t_xknbk                             = gt_t_xknbk
T_XKNB5                             =
T_XKNEX                             =
T_XKNVA                             =
T_XKNVD                             =
     t_xknvi                             = gt_t_xknvi
T_XKNVK                             =
T_XKNVL                             =
T_XKNVP                             =
T_XKNZA                             =
T_YKNAS                             =
T_YKNBK                             =
T_YKNB5                             =
T_YKNEX                             =
T_YKNVA                             =
T_YKNVD                             =
T_YKNVI                             =
T_YKNVK                             =
T_YKNVL                             =
   t_yknvp                             = gt_t_yknvp
T_YKNZA                             =
T_UPD_TXT                           =
   EXCEPTIONS
     client_error                        = 1
     kna1_incomplete                     = 2
     knb1_incomplete                     = 3
     knb5_incomplete                     = 4
     knvv_incomplete                     = 5
     kunnr_not_unique                    = 6
     sales_area_not_unique               = 7
     sales_area_not_valid                = 8
     insert_update_conflict              = 9
     number_assignment_error             = 10
     number_not_in_range                 = 11
     number_range_not_extern             = 12
     number_range_not_intern             = 13
     account_group_not_valid             = 14
     parnr_invalid                       = 15
     bank_address_invalid                = 16
     tax_data_not_valid                  = 17
     no_authority                        = 18
     company_code_not_unique             = 19
     dunning_data_not_valid              = 20
     knb1_reference_invalid              = 21
     cam_error                           = 22
     OTHERS                              = 23.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    WRITE: / 'Error Message:', 'error in creation'.
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'costomer', gwa_itab2-kunnr, 'created'.
ENDIF.
ENDLOOP.

please let me know if my qestion is not clear...
and please cinfirm me ..that can i use the function module (SD_CUSTOMER_MAINTAIN_ALL) instead of BAPI (BAPI_CUSTOMER_CREATEFROMDATA1) for uploading customer master data.
please respond me ASAP.
thanks in advance and will give full points
thanks&regards
Srinivas.

Best practise in SAP BW master data management and transport

Hi sap bw gurus,
I like to know what is the best practise in sap bw master data transport. For example, if I updated my attributes in development, what are the 'required only' bw objects should I transport?
Appreciate advice.
Thank you,
Eric

Hi Vishnu,
Thanks for the reply but that answer may be suitable if I'm implementing a new BW system. What I'm looking for is more on daily operational maintenance and transport (a BW systems that has gone live awhile).
Regards,
Eric

Copy mode of payment from customer master data to sales order,

Hi Gurus,
Hope all is fine.
I have a small doubt. If we want to transfer the mode of payment from customer master data to sales order, do we have to use Exit- MV45AFZZ.
Can't we transfer the data without the exit?

Hi,
I have tested this in sand box.Thought the customer master is having payment method ( payer ) ,It is not copying from customer master to sales order but if you maintain manually in sales order ,it is copying into billing document level.FYI see below snap shot.
Note:If you want it from customer master into sales order,may be you need to take help of abaper on this.
BR's,
Naren

Steps to create customized Master data infoobjects in BI 7

Hi all,
Can anyone please send the detailed steps to create customized master data infoobject in BI7,and also the data is to be extracted from two different datasources from two different source systems.
Regards,
G.Monica Roja Flora.

Some data modelling tips while creating master data infoobject and extracting data from different source systems -
If there are identical characteristic values describing different objects for the same characteristic in various source systems, you have to convert the values in such a way in SAP BW so as to make them unique.
For example, the same customer number may describe different customers in different source systems.
You can carry out conversion in the transfer rules for this source system or in the transfer routine for the characteristic.
If work involved in conversion is too great, you can compound the characteristic to the InfoObject Source System ID (0SOURSYSTEM). This means it is automatically filled with master data. The Source System ID is a 2-character identifier for a source system or a group of source systems in BW. The source system ID is updated with the ID of the source systems that provides the data. Assigning the same ID to more than one source system creates a group of source systems. The master data is unique within each group of source systems.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
Hope it Helps
Chetan
@CP..

Which is the best virus protector for mac as i think something is accessing my internet and costing me a lot from uploads, which is the best virus protector for mac as i think something is accessing my internet and costing me a lot from uploads

which is the best anit virus protection to block forien uploads using my service provider as there has been usage and i havent been on the computor

Hi Greg,
Best protection is a really secure WPA2 Passwoird to join your Router... WEP or Open is worthless, WPA can be broken, but WPA 2 is still likely not to be broken fo awhile.
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Free Sophos...
http://www.sophos.com/products/enterprise/endpoint/security-and-control/mac/
See if you might have this malware redirecting DNS queries...
http://macmegasite.com/node/3924
http://www.ehow.com/how_2128387_remove-osxrspluga-trojan-horse-mac.html
How to fix...
http://www.macosxhints.com/article.php?story=20071031114140862
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
Malware list....
How to uninstall MacKeper...
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
https://discussions.apple.com/docs/DOC-3039
http://x704.net/bbs/viewtopic.php?f=6&t=4479

Which is the best approach to upload customer master data?

Similar Messages

Maybe you are looking for