Which method of two interface are being overriden

Hi all,
I have a query.
There are two interfaces interface one interface two. and both declare a method void common()
A class three implements one, two
and implements the method common()
void common() {
System.out.println(" which interface");
so in this case the common method of which interface is being called there
Thanks

Hi,
I don't understand your question. The implementation
of a method in a class does not belong to an
interface. You only say that you fulfill a contract,
so the method fulfills the contract of both one and
two.
One thing you have to be careful of though: The method fulfills both contracts to the extent that the compiler can check. However, the API docs that describe the semantics of the methods may be radically different, and it might be impossible or nonsensical to fulfill both.

Similar Messages

  • Home tab changes are being overriden on every SP upgrade

    Hello,
    I would like to put an iView I've created in the Documents section of the Home tab of every user.
    In order to do that, I have delta linked my iView to the Documents workset located under: Portal Content->Content Provided by SAP->End User Content->Standard Portal Users->Worksets->com.sap.km.worksets->Documents.
    Everything is working well the only problem is that this this role (and workset) are managed by SAP therefore after every SP upgrade we are making this document workset is being overridden and I need to set the delta link to my iView again.
    On the other hand, I don't want to create my own role and assign it to the Everyone group, I prefer using the Home one already exists.
    Any ideas...?
    Roy

    Hi Roy,
    1.Why don't you create an additional Worksets which contains your iview and a deltalink to the SAP Workset? So changes to this SAP workset would affect your workset but the iView would be still there.
    2.You could a non-delta-link copy of the workset and add your iView? But changes wouldn't be drawn to your modified workset.
    Solution 2 would be best maybe, because SAP wouldn't change this workset so often, i guess.
    Regards,
    Marcus

  • E-invoice (two invoices are being emailed instead of one)

    Hi,
    When carrying out the e-invoice process customers receive two emails of the same invoice instead of one. Please could someone point me in the right direction to solve this issue.
    Thanks in advance.

    Hi,
    Check if you have defined twice the message in VV33. Check the entries in table NAST (number of entries, ...)
    Sometimes, some mail boxes where have a lot of messages, doesnt know if they have sent the message, so, they send twice or more until they know that it has been sent. So, check how many entries you have in SOST. If you have a lot, reorganize sost. So, check  Note 510969 - SAPoffice: Reorganization - Corrections and related notes.
    I hope it helps you
    Regards,
    Eduardo

  • Two user id are being created in BO when user is accessing from Window AD

    Hello Team,
    We are facing a problem in BO XIR3.
    1.     Where  users are login BO through Window AD login.
    2.     When users are login two idu2019s are being created in BO for that user.
    3.      One with the same name and another one with appending 0 at end.
    4.     For example if user  abcd login through window AD in BO there will be two idu2019s are created one is with abcd and another one is abcd0
    5.     Here users are already having access to BO thorugh AD aunthtication, 
                         For ex: User abcd is having access to BO through Win AD, but when he is login then one more id is being created with name abcd0 in BO.even the alias name is same for both of the ID.
                          here abcd is already in system abcd0 is being created in BO
    6     For second created id like abcd0 in BO rights are not given so user is not able to login.
    7.     Here when user abcd is login from AD his alias point to second created id in BO(abcd0) and this second id abcd0 is not having access to Bo so users are not able to access BO.
    Can you please let me know why it is happening, what went wrong and where ????
    Your help will be highly apprecaited

    OIM 11.1.1.3 is the version that we installed. USR_PASSWORD is not empty, after BP03 this appears to be a random password. it appears to be generated by oracle.iam.reconciliation.impl.ReconUserPasswordHandler. From the sequence of events it also appears that UserCreateLDAPPostProcessHandler is not getting called.
    password was same as AD username before bp03. it looks like your issue is different in this case.
    Below is the error stack that i see in oim diagnostic log.
    oracle.iam.platform.kernel.EventFailedException: Enabling failed because user SYNCTEST5 is not synchronized to the LDAP directory.
    at oracle.iam.ldapsync.impl.eventhandlers.user.util.LDAPUserHandlerUtil.enableUser(LDAPUserHandlerUtil.java:79)
    at oracle.iam.ldapsync.impl.eventhandlers.user.UserEnableLDAPHandler.execute(UserEnableLDAPHandler.java:143)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runPostProcessEvents(OrchProcessData.java:1153)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:703)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:220)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
    at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
    at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
    at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
    at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  • PREC: two spools are created

    We are having a problem when we run tcode PREC in 6.0 version.
    When we run it in background, we see that two spools are created but in
    4.6C version we only had one. Besides, we don´t see the trip number nor the
    emplyee number in the second spool.
    Currently this is only happening when "invalid event" error is
    populated but we don´t know if there are another errors that bring
    about the same.
    So, the questions are:
    Why two spools are being generated?
    what other errors could cause the two spools to be created?
    what is the second spool for?
    Is there a posibility to show all the information in one spool?

    Hello Emiliano,
    This is not an error.
    If you run the RPRTEC00 not in background mode, you will get      
    the error for the Rejected Trip in the first screen. If you press the    
    back button you will get the additional information "Invalid event       
    (status 2)" in the second screen. This is the reason why in the job      
    it created  two spools. Nevertheless the "Invalid Event" message will    
    not help with the error because the important one is in the first        
    screen already, the rejected trips.                                                                               
    This is a standard behaviour rather than an error.  
    Regards,
    Raynard

  • My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

    My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

    Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
    Example
    http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1

  • Help Determining Which Methods/Classes Are Being Used

    Hello,
    I'm having issues with my company's Java application and because I've luckily narrowed the classes down to a meager 30+ I need some help pinpointing my problem.
    I realize there are a lot of Java monitoring applets/applications and some are deployment-specific but I need something very detailed-- I haven't found the features I need.
    Specs:
    Jrun4, Java 1.4, Windows Server 2003
    I would like to have a monitor that tells me exactly (real-time) what classes, methods, variables, etc. are being called in real-time. Looking at the JRun launcher console for one process gives me this:
    Generating report:quadbase.reportdesigner.ReportAPI.QbReport with export type:PDF
    01/16 14:05:33 error Software caused connection abort: socket write error
    java.net.SocketException: Software caused connection abort: socket write error
            at java.net.SocketOutputStream.socketWrite0(Native Method)
            at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
            at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
            at jrun.servlet.io.MetricsOutputStream.write(MetricsOutputStream.java:75)
            at java.io.BufferedOutputStream.write(BufferedOutputStream.java:106)
            at jrun.servlet.http.WebOutputStream.write(WebOutputStream.java:64)
            at jrun.servlet.file.FileServlet.pipeData(FileServlet.java:419)
            at jrun.servlet.file.FileServlet.service(FileServlet.java:254)
            at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
            at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)This is cute, but not really helpful. I would like to determine what was passed to the process, from where and what went wrong.
    For example,
    Instead of this:
    Generating report:quadbase.reportdesigner.ReportAPI.QbReport with export type:PDF
    01/16 14:05:33 error Software caused connection abort: socket write errorI would get something like this:
    Generating report:quadbase.reportdesigner.ReportAPI.QbReport with export type:PDF
            Page variables: test.jsp ($var1= "I'm"; $var2= "Going"; $var3="To"; $var4="Break"; $var5 = null)
            Calling: test2.jsp
            With: jrun.bin.db.foo.Bar();
    01/16 14:05:33 error Software caused connection abort: socket write error
            Problem: $var5 = null;Sorry if I'm rambling, I just want to know what is where and who it's calling when it breaks. Then I could deduce which class, what variable, what page, etc. My application is very complicated and seemingly mundane changes can throw it all off.
    Any ideas?

    We'll look into usage tracking. We're on the standard edition, so I'm not sure if it's available. Also, some of these reports may be quarterly -- so there may be a long wait to see if the view is used and I need to know fairly soon. (If it's not used, it saves us some work in a project transition going on.)
    I certainly don't understand the underlying structure of the product, but it seems like there should be some way to determine if a view is used by a report. I apologize if I'm not using the correct terminology. Thanks for your help -- we'll keep looking into it.

  • Class extends two interface which have method in common name

    A class implements two interfaces. Those interfaces have method in common name.
    For ex;
    public interface b{public void hello();}
    public interface c{public void hello();}
    public class a implements b,c
    public void hello(){}
    Since two interfaces have common method, How to differentiate in this case ?

    How to differentiate what? You have to provide a method called hello(), just as in your example. (Normally you would have code in the method body, but zero lines of code is not against the rules.)

  • VLANs 133-134 on Interface port-channel10 are being suspended. (Reason: Vlan is not allowed on Peer-link)

    I just added 2 vlans Port-channel10 on two of my Nexus 5000's that go from the to a 6509 Catalyst switch. I get this error when I do a show log:(VLANs 133-134 on Interface port-channel10 are being suspended. (Reason: Vlan is not allowed on Peer-link) When I do a sh int trunk I see Po10 (int Eth1/3) that Vlans Err-disabled on Trunk. Another odd thing when I do an spanning tree summary neith 133 or 134 is added in to the summary? Why would spanning-tree be ignoring these two new vlans?
    They are configured as so:
    interface port-channel10
    description "vpc 10 eth1/3 to 6506 po10 ten5/4"
    switch port mode trunk
    switchport trunk native vlan 999
    switchport trunk allowed vlan 130.,133-134,139,145,155,160-175,239,242,254,999
    vpc10
    What can I do to get 133 and 134 vlans to stop erroring on Port-channel 10 on both Nexus 5000's?

    Firstly I should say I have not used Nexus switches so the following advice should be treated with caution.
    Have you added the same vlans to the allowed vlans on your vPC peer link. That is what the error message seems to be telling you ie. they are not currently allowed.
    They need to be allowed otherwise the vlans are suspended which is what is happening.
    As I say I haven't used these switches so I can't say for sure if there is any downtime/disruption when you modify the allowed list but I think that is your problem from what I can see.
    Jon

  • How to find out which queries are being used ?

    We have a number of InfoSet Queries which the users are calling from SQ00. Some of them are very old.
    I would like to find out which queries are being used, so we can have the idle queries decommissioned.
    How can this be done ?
    Best regards,
    Peter

    Hi,
    It's been a while since I've done this but one method is to use ST03N & look for the execution of programs with an AQ* prefix.  The general structure is AQZZ/<query user group><query name>.
    You could probably get the same info from the audit log but I've not checked that.
    Cheers,

  • In which method i can upload data to two transactions at a time and how ?

    Hi,
    Can any body tell me  <b>In which method i can upload datas to two transactions at a time and how</b>
    Pls tell me the steps if possible.
    Thanks
    Prabhudutta

    Hi,
    I hope u are talking abt BDC,
    If it is BDC's Then you can use both the methods.
    Call Transaction or
    Session Method.
    Ex ..if already a vendor exists then call transaction xk02
    if vendor no is not yet created then call transaction xk01.
    hope this helps.
    santhosh

  • Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
    Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire.  Let me know. Hope I got it right. Thanks for responding.

  • Recently upgraded my iphone to ios 7. I'm using icloud to backup the phone and I cannot tell which, if any, of my photos are being backed up.

    I cannot tell which, if any, of my photos are being backed up from my iphone to icloud.  The "switch" at Settings>iCloud>Photos is "off" but when I try to turn it on all I get is two more options to turn on My Photo Stream and Photo Sharing.  I only want to back up my photos to iCloud so I can make sure I don't lose something when installing updates.

    iCloud backs up the photos in your Camera Roll and keeps the last 30 days of photos in your Photo Stream if you have Photo Stream turned on. However, each backup overlays the previous one, and only the last three are kept, so if you start deleting photos from your camera roll, then the earlier ones would no longer be available for you to use as a backup.
    iCloud is not intended as an archival storage of your photos. You should be importing your photos to either iPhoto on your Mac, or to your PC or to a photo archival cloud service like DropBox. If you rely on iCloud for full archival storage of your photos, you are going to end up losing valuable photos that you want to keep, because that is not the purpose of iCloud.
    See this article:
    http://support.apple.com/kb/ht4083
    Cheers,
    GB

  • Can you see which timeline clips are being used in Media Browser?

    I'm a relatively new user and may not be familiar enough with cs5.5 but
    is there a way to see what clips are being used on the editing timeline in the media browser.
    I open premiere pro - Project is loaded. I edit the scene until it is finished.
    When I look over at the media browser, all my raw clips (some of which I'm
    using on the editing timeline) look the same - I can't tell which ones I using on the timeline.
    The reason I ask - when I fiinish editing a scene it would be nice to glance over at the
    media brower folder where my raw clips are located - easily see which ones I'm using because they
    are highlighted or checked and then delete the ones I no longer need.
    Is there a way to do this now?
    Thanks
    Jeff

    I dont think so  but a better way is to look in the top of the Project Window and there is a drop down that will show you all the useage instances of the clip.  You can click on them to go to them in the timeline.

  • How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames)

    How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.

    In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
    Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
    Andy

Maybe you are looking for