Which network is used for the modem if wifi is active on the phone?

Can someone tell if I use the blackberry as modem for my pc but there is an active wifi connection on the blackberry at the same time will the internet connection for my pc provided via the wifi network or via the mobile network (despite of the wifi is also there)?
Thanks!
Péter

If you used the on-screen keypad to enter the numbers and letters, is there a "Done" button at the bottom - if so, click that.

Similar Messages

  • I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

    Yes, you can.

  • HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

    I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

    JarleEkanger wrote:
    How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
    It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
    Here's one simple way to do it..
    (If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    averages of 10.png ‏5 KB
    averages of 10.vi ‏9 KB

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • In my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

    in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

    while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])

  • Using my Actiontec modem's wifi, it doesn't find my new airport express.  When I use the new airport express network I created error message says ip address is wrong.  Help setting this new airport express up

    Using my Actiontec modem's wifi, it doesn't find my new airport express.  Using the new airport express network I just set up it says the ip address is invalid.  What can I do to overcome this blinking amber light and error messages?

    You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
    If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

  • Authentication is required to set the network proxy used for downloading packages

    hello all,
    we bought a Sun X3-2 and our reseller installed OL6.5 and SRS 5.4.2. When user logs in, a window occurs regularly, displaying this message.
    Authentication is required to set the network proxy used for downloading packages
    After click on Cancel, the window re-appears then minutes after. It seems that it is related to polkit:
    /usr/libexec/polkit-gnome-authentication-agent-1
    Can i stop this service? Are there any hints to tune Oracle Linux when using sunrays? users don't need to update packages because the server is managed.
    thanks in advance for help,
    gerard

    i'm not fully agree with you, this problem arises because i'm using sunray. But you're right, i found the solution when searching on the net, not in oracle forums.
    The solution is to create
    .config/autostart/*.desktop
    with:
    X-GNOME-Autostart-enabled=false
    it seems ok, even if i have other problems, for instance, firefox and thunderbird crashing regularly, even if i'm up to date with packages (uln too).
    In the past, i used to use sunrays with solaris 10, it existed a document to tune gnome when using sunrays, i don't find the same thing with oracle linux.
    thanks for your reply,
    gerard

  • I do not know which email i used for the my old apple ID.

    I do not know which email i used for the my old apple ID. All I know is that it goes C*****@gmail.com. Is there any way for me to figure out my username or email used for the apple id without having the username or email logged in?

    You need to try each one you think it might be, or try using Apple’s iForgot service, or if you’re the device’s original owner, take it and its purchase receipt to a physical Apple Store.
    (117341)

  • "Command-i" which was so useful in being able to selectively delete messages from the servers no longer works. Is their a replacement? Will it be fixed? Or should I change my mail application?

    "Command-i" which was so useful for selectively deleting messages from servers has disappeared in  Maverick. I wonder if it has been replaced by something else or should I look into other mail applications.

    Hmmm.  Which Mail program are you referring to?
    in Mac Mail command -i used to bring up the Account info pane on the server  (10.8.5)
    Now it seems you have to use the gear at the bottom in "Mail Activity" to get the drop down (10.9) :

  • Which method is used for event creation

    Dear All,
    My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.  
    I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for  BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
    As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
    Can some one guide me, how can I found that which method is used for event creation in different pur org?
    How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation. 
    For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module'  for all the workflow - WS92000030, WS92000021 etc.
    Thanks in

    Hi Sahu,
    I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
    Istead what i think is, they might have given the Event Condition for each workflow.
    In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
    Please check this.
    Regards,
    Gautham

  • Which CKM is used for moving data from Oracle to delimited file ?

    Hi All
    Please let me know Which CKM is used for moving data from Oracle to delimited file ?
    Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

    Addy,
    A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
    Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
    Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
    HTH

  • I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account. why is this?

    I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
    How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • How to specify which cert to use for software virt server?

    Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

    No, this is not possible due to limitations of the underlying protocols.
    HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
    Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
    You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

  • After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

    I'm using two displays and several desktops on my Mac (OS X 10.9.4).
    When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

    Hi Nerva,
    Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
    However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
    Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

  • Which cable should use for Sony DV connect to iMac ?

    Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

    If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
    http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
    If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
    http://www.radtech.us/Products/ProCableFW400800.aspx
    Links are to illustrate examples. You should be able to pick them up at most computer stores.

Maybe you are looking for