Which obiee version supports windows 7

which obiee version supports windows 7 ??
Is there any patch available for obiee version 10.1.3.4.0 to supports windows 7 ??

[email protected] wrote:
which obiee version supports windows 7 ??None. Get a VM and install it under XP or Linux.

Similar Messages

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

Which IOS version supported EEM?

Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugo

EEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960.

Which database version supports replication for 120000 records/table

Hello everyone,
I am being asked about which DB version supports replication for the case where the number of records exceeds 120000 per table (probably more). I never used replication before so I can't give advice about it.
Should SE one be used? SE, or EE?
Advice please, if possible some references as well...
yours

Either version will support more than the number of rows mentioned above. With replication there are many choices but with Standard Edition, it becomes more limited. I worked for Quest Software and we have a product called SharePlex which is an Oracle replication tool which support both Enterprise Edition vs. Standard Edition. We even have a special pricing for Standard Edition as well.

Is there a document about which safari version support h264?

I used http://html5test.com to test safari, and found that:
some version of safari is not support h.264(as below image), and some is support h264.
So i want to know is there a document about which safari version support h264 and which version is not support?

Hi Claude,
If you have market place user access, then go to the following link, which is the PAM of Data Services 4.2
https://service.sap.com/sap/support/pam?hash=pvnr%3D67838200100900005703%26pt%3Dg%257Cd
Anyhow also go through the PAM of Data Services 4.1
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50bf92df-e586-2f10-588f-95ff347211ba?overridelayout=t…
In the above document, page 10, its mentioned SYBASE 15.7 is compatible.
So probably for the latest version of data services, Sybase 16 should also be hopefully compatible.
Once you get through the PAM of DS 4.2, do update here!!
Regards,
Mubashir Hussain

How to select which language version of Windows to use?

In Finland Toshiba Satellite L670-128 comes with pre-installed Windows 7 Home Premium and the user should be able to choose between English, Swedish, Finnish, Norwegian and Danish versions of Windows. However, when I started the computer for the very first time, it started to make some final installations and setups in Swedish. It newer asked me what language version of Windows I would like to use, so now I am having Swedish Windows in my computer. It is however English version of Windows that I would like to use, so how can I change the operation system language?

" Has the system really lost all the other language options from the harddrive while the first installation?". To the best of my knowledge when you first start a "pre-installed win 7" system there is a scroll box that sets the language and certainly for Home Premium it states that this choice cannot be changed.
I'm confused as to the solution you are looking for. As far as I can see your options are the free software that claims it can change the installed language or go for a re-install and hope that fixes it. I'd ensure I was ready to do a reinstall and try Vistalizator first to see if it worked.

Which mySAP version support Adobe 8.0 and IE7 to show PDF forms

Hello,
I would like to know what is the mySAP (HCM) version and support package level which supports using PDF forms if the Adobe Acrobat or Adobe Reader is 8.0 and if Internet Explore is version 7.
We are trying to view (static forms so far) HCM related PDF documents by using PORTAL. The current version (SAP + plug-in) does not support Adobe 8.0 --> forms cannot be used.
A promt answer is highly appreciated.
BR,
Pipsa

Neha,
Thanks for the response.
We are running acroread headlessly since it is on a remote server that we access via telnet. Without an XServer session, I can't tell whether acroread is able to read and display the PDF files normally. However, we can view the PDFs with Adobe Reader 8.1.2 on Windows and the acroread -toPostScript command-line that we are using does work properly with other PDFs.
I will email you a copy of a problematic PDF shortly.
Regards,
Steven Dickson

Which Illustrator version supports I-Mac OS 10.6.8 2 Ghz Intel Core Duo?

I am looking to purchase Illustrator for my old I-Mac. Which version can I buy for OS 10.6.8 2 ghz Intel Core Duo? Any thoughts?

kathylova wrote:
I thought that too, but it looks like the Intel Core duo is not supported. Frustrating!
for CS6? I had a 2008 core2duo MacBook running CS6 until last year. it runs fine.
edit: ohhh, original core duo! sorry, misread. don't know about that one.

Which recent version supports VI(4.0.2)?

I have a old test machine of GEOTEST. I downloaded LabVIEW drivers from their web site while installing LabVIEW 2009.
When I open a VI in LLB, LLB Manager says that LabVIEW version is too old, LabVIEW Load Error Code 10.
Which version is the lastest version that supports VI 4.0.2?

According to this, the latest version that will open 4.x is 8.2.x.
If you do not have 8.2.x, then post the VIs and ask if someone can convert them for you.
You might want to think about posting to the LabVIEW board. This Counter/Timer board is not really appropriate.

Which VMware support Windows 7 as Host and Windows Server 2003 as Guest OS

Folks,
Hello. I need to install PeopleSoft PIA in Windows Server 2003.
Because my laptop is preinstalled Windows 7 Home Premium Editon and cannot dual boot multiple Operating systems. I have to install VMware in Host Windows 7 and then install Windows Server 2003 as Guest OS for PIA.
I have installed VMware Server 2.0.2 into Host Windows 7 and Windows Server 2003 as Guest OS. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333/ui cannot display any more.
I have found that Windows 7 is not a supported Host Operating System for VMware Server 2 and strange thing might happen anytime. I found that "VMware Player 3" is fully supported Windows 7 as Host OS but is not supported Windows Server 2003 as Guest OS.
Does any folks know which VMware product support Windows 7 as Host OS and Windows Server 2003 as Guest OS ?
Many thanks in advance.

Hi,
Based on my research, I would like to suggest the following:
1.
Ensure the printer is compatible with Windows 7 and Windows Server 2003 and the drivers are up-to-date.
2.
Try the following method:
Printers that use ports that do not begin with COM, LPT,
or USB are not redirected in a remote desktop or a terminal services session
Hope this helps. Thanks.
Regards,
Nicholas Li - MSFT
That doesn't apply to Windows 7 Machines. I'm having the same problem as Acer_, I have a RDP Session from a Windows 7 Machine to a Windows XP machine and the local printer was available a few days ago but isn't anymore. The drivers are installed on both PC's
and are compatible with Windows 7.

Supports Windows 2008 server OS

Hi All,
Which Cisco ICM(Enterprise) version supports windows 2008 server OS. Is ICM 8.0 or 8.5 supports windows 2008 server os?
Thanks,
Senthil.

Still unsupported, even on 8.5.... see the latest 8.5 BOM below
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_8_5/user/guide/icm85_bom.pdf

Versions of Windows for running running CS3 Web Premium?

Which recent versions of Windows will CS3 Web Premium still run successfully on?

Hi Wawamama,
Welcome to Adobe Forums.
Below are the system requirements for CS3 products.
http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection/systemreqs. html
However if you are already using Windows 7, you can try to run the applications in compatibility mode.
Thanks

Is it better to install Windows 8 via Boot Camp than risk installing an unstable version of Windows 8.1, which isn't yet supported?

Apologies for asking this question as I note a number of similar questions have been asked. However, having read many answers on here and trawled the net I'm still not sure what the right answer is...
The Boot Camp 5 FAQs state that Windows 8.1 is not yet supported: http://support.apple.com/kb/HT5639
Despite this, I have noticed that some users have installed 8.1 with varying success and in some cases have needed to use workarounds.
I've not partitioned a drive before and want to take the most straightforward route to installing Windows on my Mac.
This leads me to believe that I should buy Windows 8 now, wait for Boot Camp to be updated in the near future and then update to 8.1 (or later).
Is this correct?

Thanks Bob,
Would you install the OEM system builder version or the full retail version of Windows 8?
My understanding is that the OEM version is cheaper and can still be registered for personal use, but doesn't come with the full documentation or helpdesk support from Windows which concerns me a ittle.

Which versions of Windows 7/8 are supported/best for Boot Camp 4/5?

Hello
As the title suggests, I'm a bit confused as to which versions of Windows 7 work with Boot Camp 4, or whichever ships with Mountain Lion (which one, 4 or 5, comes with ML 10.8.3?).
Mainly, I want to know if I can use an OEM copy, and what difference it makes to me, the end user, as opposed to a full license disk. Additionally, which service packs are supported? Eg, SP1 or SP2 or ...?
Lastly, and this is more of an opinion question, but is Windows 7 or 8 better suited to a Mac? I have 2.5 GHz i5 processor, 8GB RAM, ML 10.8.3, Macbook Pro 13-inch Mid-2012.

You can get a better idea of which version are supported by each Boot Camp version in this website > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US
In general, Boot Camp 4 supports 32-bit Windows XP, and 32 and 64-bit Windows Vista and 7, and Boot Camp 5 supports 64-bit Windows 7 and 8 versions (in compatible computers).
You can use a OEM or System Builder license, always that you have bought it from a source like Amazon or NewEgg. If you are trying to use the copy you got from another PC, it won't work. Boot Camp supports Windows XP SP2 and later, so all service packs released after it are supported.
Windows 8 has been out for a few months and it has got a new interface. If you don't want to learn a new interface, go for Windows 7. Both versions will work properly on your computer, so it's a matter of personal choices

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Which obiee version supports windows 7

Similar Messages

Maybe you are looking for