Which result source defines the results of osssearchresults.aspx?

Hi,
I wonder Which result source defines the results of osssearchresults?
Is it based on any of the result sources defined on site or site collection settings?
Thank you,

Hi allan48,
The osssearchresult.aspx result is based on the result sources defined in the Site Settings->Search Result Sources.
The by default result sources in Manage Result Sources is “Local SharePoint Result”, I have site without video items, when I change the result sources to “Local Video Result”, I have search result in my search result page ossearchresult.aspx,
please have a try on this.
The result source is a definition that specifies the following:
A search provider or source URL to get search result form.
A protocol to use to get search result.
A query transform, which can narrow results from the given search provider or URL to a specified subset.
To get better understanding about this, I would suggest you to go through the following article, Understanding result sources for search in SharePoint Server 2013:
http://technet.microsoft.com/en-us/library/dn186229.aspx
Thanks,
Qiao Wei
TechNet Community Support

Similar Messages

SQ02 - Issue on a infoset which doesn't order the results

Hello to everyone,
I'm experiencing some issues when creating a Infoset and implementing the relative query, as the results aren't ordered by the first field which is the Primary Key of the first table of the join which composes the Infoset. Here are the details:
I've created a query on the following JOIN:
DFKKKO >> ERDB >> ERCHC
Plus, i've implemented some code to mess the query so that it returns some additional field with custom values.
One of the target of this query is to have the output sorted by DFKKKO-OPBEL, which is the key of DFKKKO, but it seems that when I ask for a big amount of data, the output isn't sorted at all.
Is there a way to ask the infoset via SQ02 or the query via SQ01 or some coding within the additional fields, etc.. to sort the output by certain fields? In this particular case, I'd like to order for the first output field which is the key of the first table of the join.
Thank you very much in advance.
Best regards,
Claudio

Hello Arbind,
thanks for your quick reply, i'll be start testing it immediately, but I've seen that apparently this method sorts the extraction after it is done. Even though it could appear strange, I should keep a progressive number while elaborating each row of the selection, so for example I'll count in this way:
record 1 - counter 1
record 2 - counter 2
record n - counter n.
Actually, my problem with sort was that record 1 has the key 1, record 2 has the key 2018, record 3 has the key 58, so the counter 2 points to a wrong record.
Your solution is really helpful, but do you know actually if I can put a sort or order by directly in the main selection by indicating something somewhere?
If it isn't possible, i'll start thinking of an alternative solution for the counter problem (which is a counter of the billing rows in a document, instead of a simple counter).
Thanks also to Christian for the answer!
Thank you very much.
Kind regards,
Claudio
Edited by: Claudio CPU on Feb 22, 2011 12:14 PM

Waiting for the results and when the results are available show them...

I have an input page, where the user gives an input. When the user submits this input page, the input is submitted to the server side component which does its processing (which is a time consuming process)....till the results are available i need to show a message that the query is being processed and once the results are available i have to show the results. How do i implement this? How will the page come to know when the query is processed and the results are available? please help..

j2eeprofessional wrote:
I have an input page, where the user gives an input. When the user submits this input page, the input is submitted to the server side component which does its processing (which is a time consuming process)....till the results are available i need to show a message that the query is being processed and once the results are available i have to show the results. How do i implement this? How will the page come to know when the query is processed and the results are available? please help..Following is the URL for ajax support.
[ http://livedemo.exadel.com/richfaces-demo/richfaces/status.jsf?c=status&tab=usage|http://livedemo.exadel.com/richfaces-demo/richfaces/status.jsf?c=status&tab=usage]

Modifying the Default Result Set on the Results Tab of the SQLWorksheet

I have found the previous posts indicating that the default result set size is 50, that it is not currently able to be modified and (good news) that an enhancement will be coming to correct this.
I thought I would give my two cents on how this option might be configured:
Either in the 'View-Options-(output options)' or the 'Tools-Preferences-Environment' areas, have two options. The first would be something like "Max Rows to Display in Results Window" and the second would be sometihng like "Max Rows to Load when end of Current display is reached."
The first option is certainly most essential, but the latter option I have to explain a little. Say you set your max rows to display to 500. You scroll (drag bar, arrow down, etc) to record 501. At this point, the setting on the "Max Rows to Load When End of Current Display is Reached" option comes into play. This setting will then be read to determine how many rows are to be loaded each time the user gets to the current end of display. The second option adds some flexility to how data rows will be displayed after the initial data rows are loaded.
You could just default the number of rows added to the display to the setting set in the "Max Rows to Display in Results Window" setting, although I would say that this would be less flexible. Whatever you do, don't follow the Toad example of loading ALL records when dragging the vertical bar to the bottom of the display grid.
Thank You for your time.
Scott Lips

I like the idea.. please post this on the sister website so that people can vote on it.
http://sqldeveloper.oracle.com/

How to add a 2D result array to the result database?

I am using Teststand 3.5 and I am about to create a Labview VI that will measure the gain response of a receiver. This VI will output it as an 2D-Array and I would like to save it to my access result database, to be able to use that data for displaying a graph in my excel report.
I am new to teststand and I already know how to add a 2D-array to a report but don't really know how to add this information to the database. I read the provided manuals and searched the forums but didn't find anything that was really helpful. AFAIK I can add numerics and strings to the database just by adding a string value or numeric limit test but when it comes to arrays (especially 2D), I have no idea how to do that. I only know (or guess) that I have to add a new table to my database, edit the schema and the Database.seq.
I appreciate any help!
Stephan

Stephan,
Sometimes forum posts make you research a particular functionality of TestStand and lead you to discover how powerfull TestStand can be. This is one of these cases. I thought that in order to save 2D arrays in TestStand we would have to customize many different aspects of the application only to learn that the functionality is fully implemented already!
First, you will have to create a new step type that contains a 2D array in the Step.Result properties.
Second, in order to save a 2D array into a database, use the Binary Column Type in your table. To do this, create a new table with the following properties:
Type: Recordset
Command text: "SELECT * from [Table Name]"
Apply to: Step Result
Types to Log: [Step type with which you are acquiring your 2D array]
Lock Type: Optimistic
The rest of the properties can be left with their default values. Once you have your table, add an ID column as your primary key, and a second column that will contain the 2D array. This column should have the following properties:
Type: Binary
Size: 1.5 times the size of your array in bytes
Expected Properties: Logging.StepResult.[Property Containing the Array]
Expression: Logging.StepResult.[Property Containing the Array]
The rest of the properties can be left with their default values. In order to see the values stored in the database, open the Database Viewer to the particular table and right click on the field which will show a value of "Binary Data". Right click on the value and select Evaluate Data. The View Binary Data window will let you see all the values stored in the array.
Regards,
Santiago D

Error with OpenSearch result source in Sharepoint online

I have error with result sources that use the Opensearch protocol. I add them via Site Settings -> Edit Result Source -> New Result Source but everytime I test them in the Result Sources list I get error saying
key is null or empty
Parameter name: key
This same happens every time regardless of the source Url. I've tried with sources like Live Search (Copied the url from the preset source "InternetSearchResults"), and other sources I've found from documentation and examples for Opensearch
feature.
Also, the error message is always the same when testing the Result Sources from the Result Source list, Query Builder or searching from Sharepoint site.

I am having the same issue on o365 E3... any input on this? I have tried on 2 different envs.
Danimal521 MCPD/MCAD

Search on Custom UserProfile property with multiple values in a Result Source

For my customer i have created a news system based around pagelayouts, contenttypes and the new SharePoint 2013 Content by Search Webpart.
When my customer creates a new "news page", they have the option to tag the news with a category, which is a manage metadata field. I use this property to filter different views in the "Content By Search Web Parts" presented on the front
page of their intranet.
The customer also wanted a "user specific" news result source, which returned the news in which the user was interested in reading.
To make this feature possible I created a custom user profile property, which was hooked to the same Term source as the field on the news content type. By doing so the users would be able to select the news categories(channels) they are interested in seeing.
I then created a result source, that matched the users selection with the selected category on the news and thereby only return the result that the users were interested in.
This worked flawlessly, until they encountered a situation where a user selected more than one category. The result source always only returns news where the category matches the first tag in the users selection. It completely ignores the other selections
chosen by the user.
Underneath you can see the configurations.
Users selection on their profile:
The result source query and result:
Where owstaxIdPANewsCategory is the Managed Property hooked to the category field on the news content type.
The above result should have given me 2 items, do to the fact that there are one news tagged with "test1" and one news tagged with "test2".
Any help would be appreciated

My colleague came up with the answer.
The correct syntax in my case would be as follows:
{|owstaxIdPANewsCategory:{User.NewsCategory}}
the "|" char indicates that it should match it up against all selected values.
taken from: http://technet.microsoft.com/en-us/library/jj683123.aspx

IF ELSE Statement in BEx Query based on the results

Hi experts,
I want to realize the following IF/ELSE statement in a BEx Query in respect to the result values
If the result of KF1 equals 0, than set the KF2 to 0, Else (KF1 NE 0) show the value of KF2
Background: I want to report the order backlog. In the example above we have an incoming order value of 23.700,80 EUR in periode 12.2013 and an turnover of 22.370,80 EUR in periode 01.2014. The order backlog in ST (KF1) is 1 ST (12.2013) - 1 ST (01.2014) = 0 ST. The order backlog in EUR (KF2) is 23.700,80 EUR (12.2013) - 22.370,80 EUR (01.2014) = 1.330 EUR. The Order and Invoice is finished, but we have an positive order backlog in EUR (reason: less turnover as incoming order).
For this case I want to realize the IF/Else statement to check if the oder backlog in ST = 0, if yes, than set the order backlog in EUR also to 0.
Any best practices?
Many thanks and best regards,
Michael

Hi Suman,
thanks aigain for your reply!
I have tried your proposal before you have posted it.
In my special case the following if/else statement works successfully:
CKF = calculated key figure
Formula1 = (CKF1 == 0) * 0 + (CKF1 <> 0) * CKF2
In my case the CKF2 is the result value from "Incoming Order value" - "Turnover"
So I had to define a separate Formula (1:1 equals to CKF2) and then I was able to set "*CKF2" in the statement.
The statement CKF2 = (CKF1 == 0) * 0 + CKF2 is not possible (because it´s not possible to calculate from CKF2 itself).
Now it works
Best regards,
Michael

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

Is it possible to name the results table.

Hi, I'm new to java and have hit a brick wall devloping a GUI which access a SAPDB database.
They layout of the GUI is:
have a awt lists in card layout, which is populated with the results of a SQL query to table REGION.
However the number of results returned can be greater then 1Mill. To minimise the mem useage, i'm using the ResultSet absolute(), first() etc methods to collect and display small chunks of the data, for the different card in the gui. This works fine :)
However, the user is able to select an item from the list to perform a new query, which the results a presented in a dialog box, not dependent on the parent frame. Works :)
But, when the user (I) try to move anothe card in the parent frame I get this error:
SAP DBTech JDBC: Object is closed
com.sap.dbtech.jdbc.exceptions.ObjectIsClosedException: SAP DBTech JDBC: Object is closed
at com.sap.dbtech.jdbc.ConnectionItem.assertOpen(ConnectionItem.java:54)
at com.sap.dbtech.jdbc.ResultSetSapDB.beforeFirst(ResultSetSapDB.java:177)
at blastDb.Table.getResultSetSize(Table.java:205)
at blastDb.Table.setCursor(Table.java:227)
at ViewDatabase$RegionPanel.setRegionList(ViewDatabase.java:354)
at ViewDatabase$TabPanel.showRegionList(ViewDatabase.java:180)
at ViewDatabase$TabButtonListener.actionPerformed(ViewDatabase.java:289)
at java.awt.Button.processActionEvent(Button.java:381)
at java.awt.Button.processEvent(Button.java:350)
at java.awt.Component.dispatchEventImpl(Component.java:3526)
at java.awt.Component.dispatchEvent(Component.java:3367)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:445)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:191)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:130)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
After some reading I have come up with this hypothesis:
In the parent frame there is the object (class) RegionTable, which contains the ResultSet (rsR) of the sql query generated by it.
In the dialog box there is the object (class) ProteinTable which also contains the ResultsSet (rsP) of the sql query generated by it.
So when RegionTable querys the database the rsR points to the results table in the SAPDB. All good.
However when ProteinTable querys the database, rsR closes and rsP is valid ie. points to the results table in the SAPDB.
Thus after the second query RegionTable.rsR is unable to collect the results of its query. BAD :(
From what i have read, if the results table is named for the first query, the second call which results table is named something diff then rsR will not close, as the results table is not destroyed, thus rsR can read it's results after the second qury.
This problems occours when the objects share the same connection or diff connections.
As far as I'm aware i'm using JDBC 1.2 drivers and SAPDB latest build.
I know i could hold the results in a view, but that requies more coding, being able to name the results table in the SAPDB make it alot easier.
So my question is:
1. Are my assumptions correct??
2. is there a SQL statement to name the results table for a given query?
From SAPDB:
A result table name identifies a result table (see table).
Syntax
<result_table_name> ::= <identifier>
And I've got no idea what is beging impiled beyond that it is possible to name a results table. Obtained from :
http://www.sapdb.org/htmhelp/da/ed9036dfe4b903e10000009b38f889/frameset.htm
If anyone can help, that would be fantastic!!!
Cheers
fauxn

I've check the code, when the dialog box is opened a new connection is made, and i still get the same error:
SAP DBTech JDBC: Object is closed
com.sap.dbtech.jdbc.exceptions.ObjectIsClosedException: SAP DBTech
JDBC: Object is closed
at com.sap.dbtech.jdbc.ConnectionItem.assertOpen(Connection
Item.java:54)
at com.sap.dbtech.jdbc.ResultSetSapDB.beforeFirst(ResultSet
SapDB.java:177)
at blastDb.Table.getResultSetSize(Table.java:205)
at blastDb.Table.setCursor(Table.java:227)
at ViewDatabase$RegionPanel.setRegionList(ViewDatabase.java
:354)
at ViewDatabase$TabPanel.showRegionList(ViewDatabase.java:1
80)
at ViewDatabase$TabButtonListener.actionPerformed(ViewDatab
ase.java:289)
at java.awt.Button.processActionEvent(Button.java:381)
at java.awt.Button.processEvent(Button.java:350)
at java.awt.Component.dispatchEventImpl(Component.java:3526
at java.awt.Component.dispatchEvent(Component.java:3367)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:445)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Ev
entDispatchThread.java:191)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Even
tDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThr
ead.java:138)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThr
ead.java:130)
at java.awt.EventDispatchThread.run(EventDispatchThread.jav
a:98)
when i ask rsR to collect the results from it's query.
Dosen't make sence, unless its they way I'm implementint the GUI???
I'll look into the JDBC driver bug.
Cheers

Problem in order of the result

Hi,
I am facing an issue which seems to be confusing. I have a query from which i am spooling the results
SELECT SUPPLIER_ID || '-' 
FROM SUPPLIER 
WHERE SUPPLIER_CODE IN (SELECT SUPPLIER_CODE 
FROM SUPPLIER_ACCOUNT 
WHERE SUPPLIER_CODE IN ('5771','5790','6436','8389','416') 
AND COUNTRY_ID = 205) 
AND COUNTRY_ID = 205; 
Usually I get the results as
5678- 
5789- 
till dec 2006
But suddenly from Jan 2007 the order of the result is changed to
5789- 
5678-. 
There is also no change in data.
What could be the problem?
thanks in advance.

Sorry i made a mistake in my query
SELECT SUPPLIER_ID || '-' 
FROM SUPPLIER 
WHERE SUPPLIER_CODE IN (SELECT SUPPLIER_CODE 
FROM SUPPLIER_ACCOUNT 
WHERE SUPPLIER_CODE IN ('5771','5790','6436','8389','416') 
AND COUNTRY_ID = 205 
AND ACCOUNT_NUMBER='891274') 
AND COUNTRY_ID = 205; 
Usually I get the results as 
5678- 
5789- 
till dec 2006 But suddenly from Jan 2007 the order of the result is changed to 
5789- 
5678-. 
There is also no change in data. 
Can plz help me why the order changes? 
Thanks for advace help

How do I display results (anywhere) from the SequenceFileLoad Step?

I want to be able to display the results from the SequenceFileLoad Sequence after the Sequence has been loaded to a window in a customized version of the CVI Test Executive User Interface. I can't seem to find where this Sequence gets called from in the Process Model (breakpoints are ignored), assuming that is where I want to make my changes.

There are 3 types of callbacks: Model, Engine and FrontEnd callbacks (see table 1-1 and table 6-4 of the TS 2.0 User Manual).
What differentiates these types are
1) Where the callback sequences are located.
2) What calls the callback.
The SequenceFileLoad callback is an engine callback. This means that it is called by the TS engine and not your model. You place the callback in the sequence file, for which upon opening, you want the callback to run.
Since the engine is executing this callback you have no control over parameters that are passed into or out of the sequence. In addition, the file global and local variables of the executed SequenceFileLoad callback are lost when the execution completes.
You could have the callback write the values of
Locals.Result to a file or station globals so that the information is available after the execution completes. There are even temporary station globals (see Engine.TemporaryGlobals) that allow you to keep hidden station globals variables that does not get written to the StationGlobals.ini upon shutdown of your station. These hidden variables do not appear in the station global window.
Attached is a starting point for you. When you open this sequence file the Load callback puts its results into a temporary (hidden) station global. When you run the MainSequence, a subsequence is called that replaces its results with those contained in the temporary station global. This only occurs if the global exists. The subsequence also deletes the temporary global. The results appear as the results of the sequence call step in the MainSequence.
By the way, you enable tracing into the engine callbacks by checking the station option, "Trace Into Separate Execution Callbacks".
Attachments:
SeqFileLoadResults.seq ‏30 KB

How to dispatch the result from test cases to the function that loads

Hi ,
     I am currently working on writing a test case and i ant to execute the test case and the result of the test cases needs to be returned to function that loads the swf file using loader.
Below is the structure
1) Project A
         Has a action script file that has a loader which inturn loads the swf file.
public function testRunner():void {
            loader = new Loader();
            loaderDispatcher = loader.contentLoaderInfo;
            sharedEvents = loaderDispatcher.sharedEvents;
            parentURL = loaderDispatcher.loaderURL;
            parentDomain = URLUtil.getServerNameWithPort(parentURL);
            parentScheme = URLUtil.getProtocol(parentURL);
            load("http://localhost:8000/abc.swf");
    var callback:Function = addAsync(onMessage, 30000, {}, handleTimeout);
    sharedEvents.addEventListener("message", callback);
    /*Listener added to receive message event*/
    sharedEvents.addEventListener(MessageEvent.MESSAGE, onMessageEvent);
        private function load(location:String):void {
            // create SWF loader
            loaderDispatcher.addEventListener(Event.OPEN, onOpenEvent);
            loaderDispatcher.addEventListener(Event.INIT, onINIT);
            loaderDispatcher.addEventListener(HTTPStatusEvent.HTTP_STATUS, onStatus);
            loaderDispatcher.addEventListener(Event.COMPLETE, onComplete);
            loaderDispatcher.addEventListener(IOErrorEvent.IO_ERROR, onError);
            loaderDispatcher.addEventListener(Event.UNLOAD, onUnload);
            loaderDispatcher.addEventListener(Event.CLOSE, onClose);
            var request:URLRequest = new URLRequest(location);
    //request.idleTimeout = 8000;
    try{
loader.load(request);
_subMovie.addChild(loader);
       catch (error:Error)
                 trace("Unable to load URL: " + error);
            // listen for DISPATCH events
            sharedEvents = loader.contentLoaderInfo.sharedEvents;
    sharedEvents.addEventListener(DISPATCH_EVENT_TYPE, handleDispatch);
2) Project B
      Project B has the test cases written and teh swf file for this project is abc.swf.
test.mxml
public function go():void {
var core:FlexUnitCore = new FlexUnitCore();
core.addListener(new TestCaseListener());
core.run(ABCTest);
var messageEvent:MessageEvent = new MessageEvent("message","action test","action testing");
//loaderInfo.sharedEvents.dispatchEvent(messageEvent);
When I load abc.swf file this inturn call the mxml file which runs the testcases by using the FlexUnitCore .
What I am looking for is dispatching the result that is available in TestcaseListener to the call of loader ie; in Project A
public class TestCaseListener extends RunListener {
public override function testRunFinished(result:Result):void {
trace("testRunFinished invoked 1 ::");
trace("failureCount::"+result.failureCount);
trace("failures::"+result.failures);
trace("successful::"+result.successful);
Is there any way in which i can dispatch the result from testcaselistener to the call where this swf file is loaded .

Hello Sue,
I just tried to export to excel with the esdev extension and got java.lang.NumberFormatException. I found the workaround at Re: Windows Multi-language env, - how do I set English for application lang?
open the file sqldeveloper\jdev\bin\sqldeveloper.conf and add the following two lines:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USyet now my date formats in excel are 'american-style' instead of german. For example 01-DEC-01 so excel does not recognize it as date and therefore I can not simply change the format.
When export to excel will be native to 1.1 perhaps someone can have a look at this 'feature'
Regards
Marcus

How to display the search result without reloading the whole page

HI,
I have separate fragments for Search Box to enter keyword and Search Result to display the result. Also I have different sections within the page to put these fragments. So how could I display the results without reloading the whole page.
Also if I have next button in my search result area, how could I display the search results in next page without reloading all other sections present in our page. Please let me know if any service or idoc function present such that result could be shown in search result section without reloading whole page.
Please let me know how to restrict page reload for every action within a page.
Thanks,
Ramesh
Edited by: Ramesh_Est on May 27, 2010 3:14 AM
Edited by: Ramesh_Est on May 27, 2010 8:39 PM

This is default behaviour of the template of your space. You can create a new page template and than you can create a region for the search results.
Or you can create a custom taskflow were you use the webcenter taskflows to search for the space.
Take a look at this white paper:
Extending webcenter spaces: http://www.oracle.com/technology/products/webcenter/pdf/owcs_r11_extend_spaces_wp.pdf
and this one:
Customizing site templates: http://www.oracle.com/technology/products/webcenter/pdf/owcs_ps1_site_template_wp.pdf
Edited by: Yannick.O on 13-Apr-2010 02:32

Putting the result of scheduler to a local directory

We have BI Publisher running on a Solaris box.
Our interest is to have the result(csv file) of a an already designed report in BI Publisher to automatically be put to a local directory on a local directory every time the schedule runs.
I have gone over the bursting and splitting guides in my reach but i have not got a solution for outputting the complete result of the report(as a whole) to a specified directory. Most of the guides split the designed reports by a KEY on the dataset result and deliver the results in different files as specified by the key.
My interest however is not to split the result of the Dataset in any way, but rather output the Dataset query result as a whole every time the schedule runs.
Please advise on the possibility of this.

I would re-post to the Flex Data Services forum.

Which result source defines the results of osssearchresults.aspx?

Similar Messages

Maybe you are looking for