Which sharepoint service applications & services are required for Project server 2013 to work fine.

HI,
Can any one help me,
I am planning to install project server 2013, what are the service applications and Services ( Manage services on server in central admin ) in sharepoint are required for project server 2013 to work fine, so that i will run only service
application and services to increase server performance..i don't want to configure all service applications when i am configuring.
Thanks in Advance..
vijay kommireddi

Hi Vijay,
If you are installing Project Server on SharePoint farm, You need to start the service Project Application Service which would be available after you install project Server 2013.
For Project Server Reporting you need to start Excel service and Secure Store service.
http://technet.microsoft.com/en-us/library/ee662106(v=office.15).aspx
Thanks,
Phani

Similar Messages

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

What are the essential services that are required for ensuring server is healthy up ?

Hi All,
Please advise me What are the essential services that are required for ensuring server is healthy up ?
Warm regards,
jk1510

The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
There are a few ways to find this in Windows Server 2008.
First click “Start” and type “Generate a system health report”
Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
health report”.
Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
Exchange Queries

Dns setting require for mail server 2013

Hello Support,
I have install exchange server 2013 and working fine but right now i have some change in DNS server record and my mail services stop. what record add to start my mail services ( sent and received). till now exchange server mail box give the error mail not
connected with server. Please revered ASAP.

couple of things to notice. if you saying your exchange services stopped... this wont happen because of DNS or are you saying you exchange is not working/mail flow.
now i would suggest to quickly check the mail services. run a test for inbound and outbound at exrca.com there you will have the proper answer that what you have missed.
and at last.. for DNS.. you need MX and A record for your email server for basic functioning .. and for autodiscover couple of more. lets verify the MX and A record first and then verify the send and receive connector. to verify MX do a Nslookup as below
>cmd
>nsloookup   {This should resolve to your local DNS if you running this from exchange server, which is recommended and should not time out}
>set type=mx
> your-domain.com {This should result "A" record / FQDN of your mail server}
> set type=A {To verify the above FQDN should point to right IP}
> mail.your-domain.com [assuming that in MX output you got mail-your-domain.com]
> 1.1.1.1 [IP of your email server]
if you are able to verify above then your chances are you dont have issue with DNS.
Make sure from oursite you are able to telnet t tour exchange server on port 25 and from inside you are able to resolve names from your exchange server and also have internet access.if you able to verify till this point then its the turn now to verify send
and receive connector. one easy way is exrca.com and then share the results.
to verify if your exchange is configured properly please follow this link.
http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Send email is not working in share point desinger 2013 for project server 2013 workflow

Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay

Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay

Excel Services for Project Server 2013 - Parameter

I have an
S curve graph project.
Using Excel Services connected to Project
Server 2013. You can pass parameter
by querystring to filter design?
Torres

Hello,
You could add the Excel Services report to a PDP and filter it using a query string filter web part, example below:
http://azlav.umtblog.com/2012/12/05/filtering-excel-webparts-in-office-365-part-2/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

SP1 files for Project Server 2013

Hi,
Where can we found the true SP1 files for SharePoint Server, Project Server and Project Pro 2013,
after the withdraw of first SP1 ?
Thanks

Hello,
SharePoint Server 2013:
http://support.microsoft.com/kb/2880552
Project Server 2013: http://support.microsoft.com/kb/2880553
Project 2013: http://support.microsoft.com/kb/2817433
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Audit Log is required for Project server

Hi,
Audit Log is required for EPM / Project Server 2010
Following are the requirements.
Project Name, Resource Name and Date of Following Events.
1. Project checked Out By, Date (This is highly important)
2. Project Checked In By, Date
3. Project Published By, Date
4. Project Saved By, Date

Hi Hachishti,
Please refer to a recent similar thread with excellent answer from Paul.
http://social.technet.microsoft.com/Forums/projectserver/en-US/435fbb7a-1c82-419c-b83e-e89419dc66aa/project-server-2010-view-plan-save-history?forum=projectserver2010general
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to put if condition by using visual studio 2012 for project server 2013 worflow

Hi,
If Project Data:Funding Required equals Yes
Go to s2- Lead Approval
Else
Go to End of Workflow
above condition is used it in sharepoint designer. I want same condition used in visual studio 2012.
Please help me how to get fields of project server in visual studio 2012.
Thanks in Advance in helping us.
Thank you
Vinay

Hi Vinay,
I can't help you for the code, but the IF THEN ELSE statement is pretty well documented in the article below:
http://msdn.microsoft.com/en-us/library/752y8abs.aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Firefox does not fully load. blue letters are visible for links. Internet explorer works fine. I downloaded the latest version of firefox

I cannot open firefox. it starts to load, but never complets.
When I open Belarc it uses firefox and works fine. When I go to my mail I get the error message I posted in troubleshootong

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Which parameters are required for generating a solution manager key?

Hello All,
I generated a key in Solution Manager, to install a SAP NW 2004s SR1.
But I receive an error during the installation from the SAPINST:
"SAP Solution manager key for the instance number... is invalid ".
I already changed the parameters for generating the key, changed the instance number, hostname, but I still receive the same error.
Could someone tell me which parameters exactly are required for generating a solution manager key?
thanks
Thomas

Dear Sri,
this is exactly what I have entered, I still get the same error message.
My entries in SAPINST:
SAPinst founds one system instance on the host with
the Instance number 00,
the Instance name SCS00.
And ask for the Central Instance parameters:
there I enter 01 for the central Instance number,
the hostname
and the solution manager key generated for the instance number 01!
best regards
Thomas

Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013

Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.com

Hi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Project Server 2013 timesheets not showing up for approval

We're using Project Server 2013 and entering timesheets. I'm a team manager who is set up as the timesheet approver for a few people, including Nicole.
Nicole opens her timesheet and fills it in for the week. She applies time to four Administrative tasks and two project tasks.
Nicole submits her final timesheet for approval. (We have also tried having her save it first, then to the final submission, with the same results.)
I go to my approval screen and see the four Administrative tasks listed as separate lines. I do not see the project tasks.
I select the four Administrative tasks and approve them. They disappear when the screen is submitted.
In previous weeks, and with some other employees, I would immediately see a single line item that said "My Timesheet" for Nicole which I could then approve. But recently this stopped, and I do not see her timesheet.
If Nicole checks the status of the timesheet it says it's submitted to me.
On my Approval page if I go to History, Timesheets this timesheet is not listed under "approved by me" nor is it under "my resources unsubmitted timesheets." It's in limbo.
The only fix is for Nicole to recall the timesheet and resubmit it. Then it shows up on my Approval page.
Any suggestions?
-- Paul

We resolved this. The solution was as follows:
Go to PWA Settings, and under Security choose Manage Groups.
Click the Team Members group.
Scroll to the Categories section, and in the Selected Categories area highlight (select)
My Tasks.
Click the box to allow the permission called Adjust Timesheet which is under the grouping for Resource.
Now don't ask me how or why that works. It's not a setting that intuitively matches what's going on. But it fixed it for us.
By the way, we had a number of other timesheet issues (view failures, etc.) that were all cleared up when we installed the April 2014 Cumulative Update for Project Server 2013, as well as SharePoint 2013 SP1. I highly recommend both.
-- Paul
Paul LoSacco, Web Presence Team, Omnicare

QueueSubmitTimesheet for other users with impersonation? Project Server 2013

Hello.
In an console application using TimeSheet.asmx on Project Server 2013 I want to call QueueSubmitTimesheet for timesheets that belong to other user.
Is this possible?
Thanks and best regards, Timo

Just start with:
http://www.apple.com/ipad/business/it/management.html

Service/Database Accounts - NT SERVICE\MSSQLSERVER & NT SERVICE\SQLSERVERAGENT - what are they for?

Hi Guys,
I’ve done a fair amount of research for this question but just cannot seem to find the answer to my question in simple, non-DBA, terms.
Server 2008 R2
SQL 2008 R2
There are 2 users in the system database logins (NT SERVICE\MSSQLSERVER, NT SERVICE\SQLSERVERAGENT) … what are they for? It appears that they
are accounts to run the corresponding Windows services but yet they cannot be selected from the list of available built-in accounts, local accounts or domain accounts.
Also, I am using a couple of domain user accounts to run the services, do I need to add them to the database? I changed the service accounts from NETWORK
SERVICE to the domain user accounts using the SQL Configuration Manger which is supposed to take care of managing the user group membership and registry changes but the domain accounts are not in the database …. The services appear to be running fine.
Thanks

In basic terms:
As you say, in the SQL Server Database Engine there are two logins;
NT SERVICE\MSSQLSERVER and NT SERVICE\SQLSERVERAGENT. The Database Engine runs in Windows as a Windows service named
MSSQLSERVER. The NT SERVICE\MSSQLSERVER login is used by the service to connect to the Database Engine. Basically, this is how it connects to itself. The SQL Server Agent runs as a Windows service named
NT SERVICE\SQLSERVERAGENT. The NT SERVICE\SQLSERVERAGENT
login is how the Windows process that is SQL Server Agent connects to the Database Engine to read the
msdb database to find out what it should do; and then do it. Both of these logins are members of the
sysadmin fixed server role, so they can do anything in the Database Engine. And they need to stay that way.
No, they can't be selected in the list of available built-in accounts, local accounts or domain accounts. This is because they are services, not accounts. They have a security identifier (SID) in Windows,
but Windows knows they aren't real users. Windows can authenticate them, but they don't have passwords that any human can use. If you run
lusrmgr.msc and look at the groups, you will see groups like
SQLServerMSSQLUser$computername$MSSQLSERVER and NT SERVICE\MSSQLSERVER
is a member of the group.
As for the account that you used to run the services, this is complicated and has changed from SQL Server 2005 to SQL Server 2008 and now again in SQL Server Code Named 'Denali'. The short answer is that
the account you specify will be used when a process tries to reach outside of the current Windows environment. But within the computer, there is a mix of authorization granted to the domain user, the service, and the Windows group
SQLServerMSSQLUser$computername$MSSQLSERVER.
The good news is that SQL Server Configuration Manager figures out all the stuff you need when you change the accounts. If you are a glutton for punishment, you can get an idea for how complicated this
is by looking at the Denali documentation where I have tried to provide more specific information. (Note this is not the same as SQL Server 2008.) You can see it at:
Configure Windows Service Accounts and Permissions
http://msdn.microsoft.com/en-us/library/ms143504(SQL.110).aspx
Rick Byham, Microsoft, SQL Server Books Online, Implies no warranty

Which sharepoint service applications & services are required for Project server 2013 to work fine.

Similar Messages

Maybe you are looking for