While capturing Part1 in J1IEX, even part2 is getting posted

Hi,
I am facing a problem where, I do goods receipt and my excise action selection will be " Only refer Excise invoice"
Referring the material document I do part1 capture in J1IEX.
While capturing part1 through J1IEX and saving the document even Part2 is getting posted.
Where as part2 has to get posted seperately.
Pls let know what could be the reason for the system to behave like this.
Regards,
Neha

Dear Neha,
It seems you are doing Excise invoice capture with reference to Goods reciept.
while doing GRN through MIGO if you select "Only refer Excise invoice" then PART1 is also getting posted & as Part1 is already posted the system proposes Part2 posting possible at the J1IEX screen.
Please note that J1IEX & Part1 posting are different concepts.Part1 is your register displaying excisable items the plant/unit has procured. To avoid upper scenario do one of the following,
1. Select "no Excise entry" --which is most fav.
2. You will  have to remove the Part1 indicator from the Excise group settings( J_1iexgrps-J_1IPART1IND)
But each time part1 will have to be manually updated through J1I5.
Hope this will help you.
Regards,
Akhileshwar K

Similar Messages

  • Not able to get ECS & S&H value while capture J1IEX.

    Dear All,
    I was trying to capture excise through tax code - Eg:- 1A(BED- 10%, ECS-2%, & S&H-1% & VAT-4%). All the value flow in PO but not while capturing it in J1IEX only BED flow, ECS & S&H is not flowing. For the same Tax Code in other Plant & material its capturing all the duty (Depot plant & non-cenvatable). I have checked all the entries in J1ID but not able to fine the Problem for (Manf. Plant - Raw Material).
    Thanks,
    sapuser

    But the value are flowing from "TAX CODE"
    Correct me - Condition maintained in TAXINJ are common to all plants?
    What should be considered for excise flow for manufacturing?
    In Manf. Plant - BED - OK, ECS - Not flowing, & S&H - Not flowing.
    Helpme to solve this.
    sapuser

  • All Part 1 Entries Have been cancelled while Capturing PartII (J1iex)

    Dear All,
    While capturing part II system is prompting  "all part 1 enteries have been cancelled" & not allowing to capture Part II. I have captured part 1 in MIGO & it is not been reversed also. In MIGO Excise duties have been enterd manually. Please provide your valuable Inputs.
    Thanks & Regards'
    Rashid Imam

    Because of account assignment, system consumes the goods automatically. Hence the issue is resolved.

  • Error message of Excise invoice has no matchin lines while capturing excise

    hi CIN gurus
    I ma facing a problem Whil capturing excise at depot. error message appearing as Excise invocie no matching lines.
    This problem occurs even after entering appropriate internal number in J1IG.
    And this problem is occuring randomly .
    This occurs for STOCK TRANSFERS FROM DEPOT TO DEPOT.
    CAN ANYONE COME OUT WITH SUGGESTION
    rgds
    BJ

    Hi,
    Refer to SNote Note 1382678 - Pop-up to select Excise Invoice in J1IH/J1IIN cancellation.
    Symptom
    While cancelling outbound Excise Invoice through the transaction J1IH or J1IIN, system always picks up the first excise invoice even when multiple excise invoices are present with same excise number and year.
    Regards,

  • SETTING to hear AUDIO while CAPTURING?

    Hi...
    (another) silly settings question.
    How can I hear audio while capturing from my HDV deck?
    When capturing from a DV device (a camera), the 'preview' box enabled me to monitor the audio from the tape while either screening it or when capturing it.
    I don't see that 'preview' box as an option in the HDV log and caputure window.
    Although I'm capturing audio from the HDV source, I can't hear it while it's loading. It's a little annoying as I'd like to be able to hear the tape as a way to decide if it's even worth capturing.
    Any ideas?
    Thanks,
    Mark

    We're here all week, try the liver.
    I've always been a believer in monitoring in the signal chain. Granted I don't work much with HDV-- but monitoring what is going into and out of the computer, rather than relying on the computer's built in audio seems to be the way to go. Then you know what's coming off the tape, and what's going back down to the tape.

  • System crashes while capturing in CS5

    Recently installed Samsung Kies software for supporting my Galaxy cell phone. Same day Win7 started crashing while capturing video in Premiere Pro CS5. It crashes after random number of minutes capturing. There's no problem with any other aplication, Adobe or not, and Premiere Elements7 captures video with no problem at all. Uninstalled Kies but Win7 keeps crashing. Any experience with this combination of softwares?

    I have one computer for everything http://forums.adobe.com/thread/652694?tstart=0 and have not had any problems
    But, I do not have and have never heard of "Kies" software
    Generally speaking... if something works and then stops working when new software is installed... that is clear to ME that the new install is the problem
    I always make a full boot drive image before installing anything
    You should buy software to make a full backup of your hard drive to an external USB hard drive... which makes restoring very easy
    The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
    Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive and not have to re-install anything
    Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up

  • How do I follow a tutorial while capturing?

    I know its a stupid question, and there are far more serious problems, but im trying to follow a web tutorial and capture at the same time on final cut pro, and I just can't seem to do both at the same time.
    My buddie swears thats just the way it is, he says its like that on adobe premiere as well; that while you capture you cant do anything else, you cant even click on the desktop , or the capturing will stop.
    but, in my experience using IMOVIE i can even browse the internet while capturing footage from a DV tape. I've followed and read the news while capturing an entire DV tape with imovie.
    i find it difficult to read the tutorial on capturing while, lol, I'm capturing!
    Any help would be appreciated, thanks!

    Trying to do anything else on your computer while
    you're capturing is not a good idea. Amoung other
    things you risk dropping frames or even crashing so
    I'd say the same things others are saying here which
    is use one computer to capture and if you must surf
    the net while capturing use another computer.
    It's not a good idea now. For years I've done all kinds of work while capturing, such as photoshop, emailing, surfing, etc. No problems at all. I repeat. No problems at all. No dropped frames. No crashes. Then I installed FCP 5. Now my multitasking is gone and the cost to my business of me sitting here editing has been increased because the machine can only do one thing at a time. I know I must be missing something here.

  • Strobe effect while capturing

    Is it normal to have the footage in the capture window to have a strobe effect while capturing?
    I'm using a Sony DSR PD-150 camera with final cut 5.1 OS 10.4.8
    Dominic.

    If you tape was recorded in LP instead of SP (as some cameras do) you will get the strobe effect on digitize even though it looks fine in your camera. If that's the case you will need to dub to another tape at the correct speed. You'll lose a generation, but I believe that's the only solution to this particular problem.
    Of course the kind people on the forum know much more than I.

  • Win XP BSOD while capture video on MSI GF FX 5900XT-VTD128

    Hello.
    I have such a problem. While capture video (overlay mode, 720x576) very
    often (but not always) Windows XP crashes on BSOD with the following error:
    DRIVER_IRQL_NOT_LESS_OR_EQUAL
    STOP: 0x000000d1 (0xF0504000, 0x00000002, 0x00000001, 0xF7A2CE57)
    nv4_mini.sys - address F7A2CE57 base at F7A1A000, datestamp 4061d74b.
        My system configuration is:
    Hardware: MB Epox EP-8RDA3I (latest BIOS version), CPU AMD Athlon XP 2400+,
    RAM DDR PC3200 512 MB dual channel (Kingston), Video MSI GeForce FX 5900
    XT-VTD 128 (VIVO, Philips SAA 7114). NO overclocking!
    Software: Windows XP Prof SP1, DirectX v.9.0.b, Nvidia Nforce driver v.4.24
    WHQL, Nvidia ForceWare driver v.56.72 WHQL (default settings), MSI WDM capture driver v.3.08 (late). Capture software: VirtualDUB, iuVCR and any other.
        What anyone will advise me?
        Thank You.
        Best regards, Dmitry.

    61.21 driver is a beta driver. its not 100%. wait until they release a full working driver. it will be released on http://www.nvidia.com.

  • HT4098 How do I unsubscribe from subscription VIP in the game StarMaker? every week, I removed 66 rubles, while I'm there not even sit, and how do I unsubscribe don't know, please help

    How do I unsubscribe from subscription VIP in the game StarMaker? every week, I removed 66 rubles, while I'm there not even sit, and how do I unsubscribe don't know, please help

    Contact the maker of the app. Apple has nothing to do with subscriptions to third party apps.

  • Default vendor is coming in J1IG transaction while capturing excise invoice

    Hi,
    While capturing excise invoice at depot by using J1IG transaction, i am getting default custom vendor automatically.
    This is for STO transfer i am capturing excise.
    I have maintained some other custom vendor in the p.o.
    Pls. let me know from where it is picking the default vendor?
    Thanks
    Regards
    Rifaie.M

    Thanks

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • While simulating cenvat in j1iex  posting

    while simulating cenvat in j1iex for import purchase orders an error is showing no cenvat amount to be posted and no cenvat amount to be reversed.
    regards
    balaji

    hello,
    please got to item details in that in duty values tab enter the ammount of value you want to post .please also check the miscellaneous tab , if there is any rejection code entered then remove that.
    thanks and regards
    vijay

  • Error while capturing Excise Invoice

    Hi experts
    While capturing the excise invoice I am getting following Error message
    " Maintain number range object for object J_1IRG23C2, year 2008, excise group 06 "
    Though I have maintained the Nummber range for excise group and object.
    please help me out
    Regards,
    jai

    hi
    thanks for the reply.
    I have already maintained Number range for Year 2008 Excise group 06 for object J_1IRG23C2 throgh Tcode -J1I9.
    Still i am getting the message.
    Regards
    Jai

  • Final Cut Express...Audio monitoring while capturing video.

    Does anyone know how to monitor audio while capturing?

    You might try posting in the FCE forum, very few Express users here in the Final Cut Pro forum.
    In FCP, the function—and limitations—is clearly explained in the manual. I hope Apple's FCE manual and online help system are as thorough.
    bogiesan

Maybe you are looking for

  • Process purchase orders

    Hi all, our's is extended classic scenario,  one user is trying the open the PO through process purchase orders option, he entered the po number and then clicked on find. He is getting the message " no documents avail for search criteria". Here the P

  • Lock the centre point of an object?

    I'm using illustrator (CS6) to animate a simple marionette type figure. I'm using the Rotation tool to turn body parts around their usual connection points, moving the transform centre point each time.  I'm wondering if it's possible to "lock" the ce

  • In ALV to make coloum heading in two lines

    I have requrement that my alv report should display the output in two lines. ie the first one should be in English and the second line should be in fresh for the same field description . Is this posible? can one help me in doing this.

  • Fetching Mutilple records in Alert.

    Hi All, I have a requirement to print the keymembers of a project who are end-dated through Alert. If a single member is end-dated I was able to print, but if there are mutiple users end-dated then i'm facing a challenge. Is there any way to print mu

  • Some Tables becomes Bigger....

    Hello, in my Quality System I see in DB02 some Tables they are become bigger.. In my Produktiv System its all normal.. WHY ? Regards baris