While confirmation through COR6N

Hi Expert,
We are working in process order scenario. I have one problem while doing confirmation through COR6N (enter time ticket for process orders) there is one field "CONFIRMATION TEXT" & that field is marked mandatory also and user is filling some text as per business needs like "contractor name" But the main concern is that we don't have any pre-entered list of names of contractors in SAP for which users are regularly making mistakes while typing the names.
and the same field is incorporetd in ZMB51 report through table name "AFRU" field name "LTXA1" but some time user entered wrong name and thus report doesnot reflect correct, how to rectify this issue permanently, is there any option to choose text as a drop down list or like any exit/functional module.
Note:- WE ARE ALREADY USING FIELD REASON FOR VARIANCE FOR SOME OTHER PURPOSE.
With Regards
V. Kaushik
SAP-PP Support Consultant

Hi kaushik,
It is possible to incorporate some more fields in the Time Ticket confirmation for process industries using the T. code OPK1 here you can choose suitability or wage group or other fields in the initial screen of COR6N, And by configuring your selection criteria for the pre-entered list of names of contractors in a field of suitability or wage group. You can make it mandatory using screen variant.
In this way you will be able to drawn Z-reports as well as the standard reports too.
This may be help you.
Regards
Anant

Similar Messages

No confirmation through Collective Confirmation CO12

Hi
We are having setup 0010 and 0020 operation, at 0010 PRT is attached with usage value calculation.
While confirming through CO12 transaction. and putting all operation together There is no confirmation is executed. We get the message "No confirmation Executed" and the message no is RU514.
We are working ECC 6.0
Can any one help

Pl check whether order is released or not ? Or if there is an costing error in confirmation , it will not post the confirmation. Pl send me the details of the error message.
Thanks

Erro:No information was found while confirmation of the order through CO11N

Dear all,
Iam getting Below this Error (Product Costing) at the time of Order Confirmation Through transaction code CO11N
Here specifying the system message
No information was found
Message no. GU444
Diagnosis
The system could not find the necessary information.
Pls revert on this ,What is the reason for this issue
Regards
Bhaskar
Edited by: bhaskaarnn on Mar 23, 2011 1:27 PM

Dear all,
I also encounter this problem.Can anybody give me some soloutions for this ?
Many thanks advance.
Regards
Sunny

While clearing through F-54 system throws error No downpayment exist

While clearing through F-54 system throws error : No downpayment exist. But I have checked in the Downpayment account, A/P account and Customer Line item and the entry exists. Customization for Downpayment made also correct. All the fields are correctly entered in F-54. Still the error comes.
Please clarify.
Thanks,
Raj

Hi Ravi,
This transaction is not a downpayment request. But one thing I have to mention. For this downpayment the assignment of alternate reconciliation account was done on 17.3.09.
The posting date and document date has been given as 13.03.2009 for the downpayment document. Whereas when I check in the entry view > header details, the posting date is 18.03.2009 (may be it is
showing the actual date of posting). When the clearing is done through F-54 by giving
date 31.03.2009, the system gives the error that no downpayment exist. If we give
the Inv.No. details and click for document display, the system shows the relevant document
to be cleared. Wen we click open process items tab, the error is shown. Kindly confirm
whether the system is not updated with the assignment of alternate reconciliation account
for downpayment when the document date and posting date has been given prior to that
assignment and that is why the system is showing error. Further, is it right to reverse that
downpayment document and post a fresh document by giving date after 17.03.2009 and then
clear the entry.
Regards,
Sadashivan

Error while confirmation

when i am confirming the order i am getting error as follows
No prices could be determined for object Activity type GXXX/ANK023/ANK-MH.
now inthis order i am having the quantity of 15 tons now while confirming i am confirming it to 16ton with th echang ein operation rate
details are as follows
>No prices could be determined for object Activity type GRPL/ANK023/ANK-MH.
>
> Message no. KW407
>
>Diagnosis
>
> No price could be found for object Activity type GRPL/ANK023/ANK-MH with
> price indicator 7 and value type 4.
>
>System Response
>
>Procedure
>
> Maintain the price manually or have it determined by the system through
please let me know why it is happening
i maintained KP26 but havent find the PI 7 and VT 4
regards
kunal
the price calculation function.

hi
>1) Check in KP26, whether price is maintained or not fo activities mainatined in that particular work center or not
checked it is maintained ofr alll periods
>2) Check the order status whether it is PRC or CSER ( this is cost calculation Status )
it is PRC
>3) if it is CSER than costing was not done properly ( Costing errors )
>4) Check in material master Costing view what is current Period showing
no entries at current period (then aslo fo rnormal order it is calculating cost properly)
>5) Check in OPK4, for ur order type & plant combination , under general individual entry tab
>there must be tick marks for both Act. costs & termination fo incorrect costs
checked it is proper
>6) Just check with ur CO Person
no CO person at our end
now when i check the KL02 for activity ype theer i found Act. price indicator as 7
is there any linkage in between these and the error

Error while scheduling through web service

We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
    scheduleService_Service = new ScheduleService_Service();
    ScheduleService scheduleService = scheduleService_Service.getScheduleService();
    // Add your code to call the desired methods.
    try {
                FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                ftpdo.setFtpServerName("ServerName");
                ftpdo.setFtpUserName("Username");
                ftpdo.setFtpUserPassword("Password");
                ftpdo.setRemoteFile("/path/TestFile");
                ftpdo.setSftpOption(true);
                List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                listobj.add(ftpdo);
                ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
                ar.setItem(listobj);
                DeliveryChannels dc = new DeliveryChannels();
                dc.setFtpOptions(ar);
                ScheduleRequest scheduleRequest = new ScheduleRequest();
                scheduleRequest.setDeliveryChannels(dc);
                scheduleRequest.setJobLocale("en-US");
                scheduleRequest.setUserJobName("Job_1_WebService");
                scheduleRequest.setDataModelUrl("Url");
                scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                String userID = "BI_Publisher_Username";
                String password = "BI_Publisher_Password";
                scheduleService.scheduleReport(scheduleRequest,userID,password);
            } catch(Exception exception) {
                exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.

Hi
Check this thread
WD Message Manager
Reward opints if usefull....

Field Profit Center is not populated while posting through T-Code F-02

Dear Sir / Madam,
While posting through T-code F-02 the field Profit center is in hidden mode
as a result I am getting the given below error.
"GLT2201 - Balancing field profit center in line item 001 not filled"
Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
I tried searching the same but could not find the solution.
Regards
Chirag Shah

Dear expert
Check following steps...
1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
2. Make sure Cost Center exists in the Asset Master..
3. Make sure profit center is entered into Cost Center master.
4.Check the steps where you assign the GL accounts to the splitting rules.
suggest you to go through the below mentioned links
Balancing Field "Profit Center" in line item 001 not filled
Balancing field "profit center" in line item 001 not filled
GLT2201 - Balancing field profit center in line item 001 not filled
Balancing field "Profit Center" in line item 001 not filled
F-51: Balancing field "Profit Center" in line item 001 not filled
Balancinf field profit center in line item 001 not filled
Regards,
Ajeesh.s

Goods Movement Qty While Confirming the Order

Hi Friends,
While confirming the order The end user Will go to the goods movement screen and enter the actual consumed Qty (When all BOM components Are marked with automatic Back flush) For the components with 261 movement type and will enter the storage location and batch no if required .
Now my requirement is the user should not have the access (it should be in gray) to the BOM Components qty to change
OR
He should not be able to change beyond the qty As per scrape % Given in Material Master or BOM.
The Reason for this is
Even When there is a shortage for BOM components in SL location, he is reducing/Adjusting the required quantities as per the existing Qty ( If there is no stock then making it to ZERO also) and confirming the order.
Pl suggest me is there any user Exit for this or can I do it thru Standard SPRO settings.
hari

Hi,
You can make screen variant SHD0 for CO11N and hide it.
In t code SHD0, give the transaction variant name ( say ZCO11N )of ur std CO11n.
CO11N screen will appear, when u will save the variant, u will getgood movement tab , it will hide now.
Activate the transaction variant.
Regards,
R.Brahmankar

Volume issue with new 30G IPOD and Dock while playing through a stereo.

Sorry if this has been discussed before, I recently purchased a 30G Video IPOD and Dock. While playing through my Stereo I notice that 1) I have to turn up the volume on the IPOD to more than 50% and volume on the receiver to over 50% also and 2) the varience in volume of some of the songs varies consideably. I played by IPOD at a friends home through his Dock and stereo and he controlled through the volume control only on his stereo (same Onkyo as mine), it overode the IPOD volume control. His Dock is about a year old, seems strange that when I use my Dock on his stereo it requires the volume use on BOTH the IPOD and the Stereo. So it would appear that his older Dock is more convenient to use than my new Dock? The fluctations in volume of the odd song is still evident on his stereo as it is on mine.Any comments anyone? Thanks in advance. Larry

Make sure Soundcheck on the iPod is enabled.
I recall a few other people have mentioned the volume control on the iPod affected the volume out the back of the Universal dock.
I have the older dock and it is not affected by the Volume control of the iPod.

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

Sales Order Confirmation through Email

Dear Friends,
Can i ask you to give me a quick idea on what need to be done to establish the functionality to send the order confirmation through emails.
Thanks in advance.
Ravi

Once you made sure that the output type definition is all set with all relevant data and ABAP work, go to the condition record of the same output. Maintain the mediums as 5 -- Extrenal Send and Date / Time as 4- send immediately when saving the order. Then go to the details of the record and maintain the relevant communication strategy. Save the record. This should trigger the mail automatically when you save the order.
If you also want to print with the same output type, then you need to go back to order VA02 , repeat output and change the medium to 1.
If you want to automatically print and also mail on single save / then you need to tweak the output program to trigger print and mail both at the same instance. This is possible by the output program. Then you need to keep the medium as 1.
Hope this helps.
Sai

Trying to create a Sales Order Confirmation through IDoc

Hi,
I am trying to create Sales Order Confirmation through ALE with message control.
My recieving system is XI server.
Can u please send me the steps to what to be done to trigger IDoc automatically.
The condition types and access sequence created is for Output type customer but i am sending it to XI Server.
please help me.
Thank you in advance,
Gangolu.

Hi Gangolu,
Have a look at url. Hope this provides some inputs.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Thanks
Lakshman

Reversal of Production Order Confirmation through IDOCS

Hello all,
The time for each operation in a production order is logged in KabaBEnzing tool called Autotime. This is sent to SAP through IDOCS and the order confirmation is created. There is a scenario where the supervisor could have entered the wrong time against an operation. Is it possible to reverse the confirmation through IDOCs. If yes, please let me know what should be the approach? Also, I heard that SAP does not accept negative time to do the reversal. How true is this?
All helpful answers will be rewarded.
Thanks,
Kalyan

Hello,
I saw your message and we are doing the same thing. Did you find any answers to your questions. We are using Kaba for our shop system and now we would like to sent negative numbers back to sap because of supervisor adjustments. I have not found any way to set Sap to allow it. What conclusions have you came up with the situation.
Thanks again,
Jeff

TO Confirmation through Mobile Data Entry

Dear All,
I have a query regarding TO confirmation through MDE(mobile data entry) screen.
In the development server, in one user the MDE screens of TO confirmation for picking and put away is working properly.We have created a seperate user in the same server.But here when we are trying to open the transactions LM03 and LM05, we get a message saying 'Logical Screen Cannot be Found'.
I want to know whether we need to maintain any data for every new user that we create, and I would also like to know where and how we need to maintain this data.
Thanks and Regards
Lokesh.

Hi ,
I think you have to maintain the Profile Defination for the User , this can be done by using Tcode SPRO then go to Logistics Execution - Authorization Management- Define Profiles.
or by using PFCG transaction.
Thanks,
Syed Quadri.

While confirmation through COR6N

Similar Messages

Maybe you are looking for