While doing backups, found a strange file ?

While doing one of my daily backups, I ran into a strange file. Not quite sure what it is for, but I have never seen it there before ?
I googled without any luck :
( 1 ) ziFAr2Kf
( 2 ) .buildpathUX
Any ideas ?
Bill Hernandez
Plano, Texas

Those are mosted likely some leftover temporary work files that were never cleaned up by the program that created them.
Very unlikely something to worry about.

Similar Messages

Exclusive file access while doing backup?

Hello!
I am hosting a minecraft server on my old 900MhZ homeserver [it DOES run really well, arch is doing an amazing job ] and I made a little bash script to daily backup the current savegame, which I run via cron:
#!/bin/bash
MC_PATH="/home/tom/mc_bukkit/dasiro"
BKP_PATH=/home/tom/_backup
if [ -d "$MC_PATH" ]; then
filename=minecraftsave_`date "+%Y-%m-%d_%H-%M-%S"`.tar.xz
tar --create --xz --file $BKP_PATH/$filename $MC_PATH
find $BKP_PATH -name "minecraftsave*" -mtime +14 | xargs rm
fi
The problem is that most often it is run I get tar: ./mc_bukkit/dasiro/region/r.-1.0.mcr: file changed as we read it.
Is it possible to "lock" the file for a few seconds while the backup is run? Maybe there is a possibility... It is no problem if the server "freezes" for a few seconds. Thank you!
Last edited by cyberius (2011-05-14 08:03:03)

Take a look at lvm and specifically lvmsnapshots.
If you have the files you wish to backup on a lvm partition, then you can create a lvm snapshot, which is a frozen snapshot of the partition. The original partition is untouched and goes about it's business. You can then mount the snapshot like any other filesystem and make a backup of it's contents.

Error While Doing Backup with SuperDuper

I bought a new hard drive and was atempting to do a backup with SuperDuper and got these messages:
WARNING: Caught I/O exception(5): Input/output error
| 08:32:50 AM | Info | WARNING: Source: /Library/Frameworks/LAME.framework/Versions/A/LAME, lstat(): 0
| 08:32:50 AM | Info | WARNING: Target: /Volumes/WD USB 2/Library/Frameworks/LAME.framework/Versions/A/LAME, lstat(): 0
| 08:32:50 AM | Info | Attempting to copy file using copyfile().
| 08:33:32 AM | Info | Attempting to copy file using ditto.
| 08:34:08 AM | Error | ditto: /Library/Frameworks/LAME.framework/Versions/A/./LAME: Input/output error
Can anyone help me resolve this error? I used Disk Utility before SuperDuper and that backup also failed.
Message was edited by: ImaVeggie

I was trying to create a bootable backup to an external USB drive prior to installing my new internal hard drive. I simply deleted the LAME Framework folder that was giving the error and was able to complete the process. I think that had something to do with MP3 encoding, converting. Hopefully not in relation to iTunes. Anyone know?

Error While doing reverse engineering on XML file

I am getting the error when I try to do reverse-engineering on a xml file.
I have set up topology like this:
JDBC Driver: com.sunnopsis.jdbc.driver.xml.SnpsXmlDriver
JDBC URL: jdbc:snps:xml?file=c:\Temp\hoy\CRM_CR_CURRENCY.xml&dtd=C:\Temp\hoy\ServiciosSerivaConsultasTypes0.xsd
The XSD file:
<?xml version = '1.0' encoding = 'UTF-8'?>
<xs:schema xmlns:s3="http://www.openuri.org/2006/12/wsdl/upgradedJWS" xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://co/com/bancodecredito/eai/serviciosLinea/seriva" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl" xmlns:s2="http://schemas.xmlsoap.org/wsdl/soap/" xmlns="" targetNamespace="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl" attributeFormDefault="unqualified" elementFormDefault="qualified">
<xs:element name="indicadoresResponse">
<xs:complexType>
<xs:sequence>
     <xs:element name="WS_ResultadoConsultaIndicadores">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Error" type="xs:string"/>
                    <xs:element name="Descripcion" type="xs:string"/>
                    <xs:element name="indicadores" maxOccurs="unbounded" minOccurs="0">
                    <xs:complexType>
                         <xs:sequence>
                              <xs:element name="fecha" type="xs:string"/>
<xs:element name="descripcion" type="xs:string"/>
<xs:element name="tipoIndicador" type="xs:int"/>
<xs:element name="codigoIndicador" type="xs:int"/>
<xs:element name="codigoVertice" type="xs:int"/>
<xs:element name="plazo" type="xs:int"/>
<xs:element name="valor" type="xs:double"/>
<xs:element name="comportamiento" type="xs:int"/>
<xs:element name="formato" type="xs:int"/>
                         </xs:sequence>
                         </xs:complexType>
                    </xs:element>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
and the xml file:
<?xml version = '1.0' encoding = 'UTF-8'?>
<m:indicadoresResponse xmlns:m="http://co/com/bancodecredito/eai/serviciosLinea/seriva">
<ns0:WS_ResultadoConsultaIndicadores xmlns:ns0="http://co/com/bancodecredito/eai/serviciosLinea/seriva/impl">
<ns0:Error>0</ns0:Error>
<ns0:Descripcion>Transacción exitosa</ns0:Descripcion>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>312</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>COMPRA (BID) UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>313</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VENTA (ASK) UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>314</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>BID BANCO REPUBLICA EUR/EUR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>396</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1.4367</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>ASK BANCO REPUBLICA EUR/EUR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>397</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1.4367</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>TRM BANCO REPUBLICA EUR/EUR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>398</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1.4367</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>BID BANCO REPUBLICA UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>432</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>ASK BANCO REPUBLICA UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>433</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>TRM BANCO REPUBLICA UVR/UVR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>434</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>196.9975</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>BID BANCO REPUBLICA USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>390</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1800.7300</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>ASK BANCO REPUBLICA USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>391</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1801.2100</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>TRM BANCO REPUBLICA USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>395</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1800.9700</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) EUR/EUR</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>241</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1.4267</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>246</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>6.4573</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>251</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>4.3000</ns0:valor>
<ns0:comportamiento>0</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>256</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>0.9913</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>261</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>12.4332</ns0:valor>
<ns0:comportamiento>1</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>272</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>77.2692</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) GBP/GBP</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>277</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1.6341</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) USD/USD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>282</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>5.2216</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
<ns0:indicadores>
<ns0:fecha>2011-08-10 00:00:00.0</ns0:fecha>
<ns0:descripcion>VALORACION (TRM VIGENTE) AUD/AUD</ns0:descripcion>
<ns0:tipoIndicador>3</ns0:tipoIndicador>
<ns0:codigoIndicador>340</ns0:codigoIndicador>
<ns0:codigoVertice>0</ns0:codigoVertice>
<ns0:plazo>0</ns0:plazo>
<ns0:valor>1.0198</ns0:valor>
<ns0:comportamiento>2</ns0:comportamiento>
<ns0:formato>3</ns0:formato>
</ns0:indicadores>
</ns0:WS_ResultadoConsultaIndicadores>
</m:indicadoresResponse>
When I try do reverse engineering I get:
java.sql.SQLException: class java.sql.SQLException
com.sunopsis.tools.core.exception.SnpsRuntimeException: ODI-40798 Tipo Desconocido: {0}element
What is the issue ?
When I change the xml file , and I remove the namespaces, so that xml file is changed like this:
<?xml version = '1.0' encoding = 'UTF-8'?>
<indicadoresResponse >
<WS_ResultadoConsultaIndicadores >
<Error>0</Error>
<Descripcion>Transacción exitosa</Descripcion>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) UVR/UVR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>312</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>196.9975</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>COMPRA (BID) UVR/UVR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>313</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>196.9975</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VENTA (ASK) UVR/UVR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>314</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>196.9975</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>BID BANCO REPUBLICA EUR/EUR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>396</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1.4367</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>ASK BANCO REPUBLICA EUR/EUR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>397</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1.4367</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>TRM BANCO REPUBLICA EUR/EUR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>398</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1.4367</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>BID BANCO REPUBLICA UVR/UVR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>432</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>196.9975</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>ASK BANCO REPUBLICA UVR/UVR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>433</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>196.9975</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>TRM BANCO REPUBLICA UVR/UVR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>434</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>196.9975</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>BID BANCO REPUBLICA USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>390</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1800.7300</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>ASK BANCO REPUBLICA USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>391</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1801.2100</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>TRM BANCO REPUBLICA USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>395</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1800.9700</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) EUR/EUR</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>241</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1.4267</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>246</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>6.4573</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>251</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>4.3000</valor>
<comportamiento>0</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>256</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>0.9913</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>261</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>12.4332</valor>
<comportamiento>1</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>272</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>77.2692</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) GBP/GBP</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>277</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1.6341</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) USD/USD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>282</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>5.2216</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
<indicadores>
<fecha>2011-08-10 00:00:00.0</fecha>
<descripcion>VALORACION (TRM VIGENTE) AUD/AUD</descripcion>
<tipoIndicador>3</tipoIndicador>
<codigoIndicador>340</codigoIndicador>
<codigoVertice>0</codigoVertice>
<plazo>0</plazo>
<valor>1.0198</valor>
<comportamiento>2</comportamiento>
<formato>3</formato>
</indicadores>
</WS_ResultadoConsultaIndicadores>
</indicadoresResponse>
It works!!!! I can do reverse engineering....What is the issue? I am running everthing with agent as Local
I really appreciate any hints.
Thanks in advance,
Deibys

Hi,
Try specifying the "re" (Root Element) parameter in the URL. For example re=indicadoresResponse
If it still fails could you post the full java error stack?
Good luck!
Jose

Strange file in Application support

Hi,
I found a strange file inside ~/Library/Application Support.
The file is called "STR8369805638PUB6932583035105".
The content of file is : "Deleting this file will break the whole internets, for the sake of our children don't do it!"
I found very few informations on Internet concerning this file except on this forum : http://www.apfeltalk.de/forum/showthread.php?t=395638
What can be this file ?
Thanks

I know it's an old post but I had the same problem. That file is created by an application called AppWrapper (www.ohanaware.com/appwrapper/) or possibly by another app from the same company which suffers from the same problem. I think it's just a bug, instead of creating the file inside the ~/Library/Application Support/appwrapper folder it creates it in ~/Library/Application Support.
I discussed how I found out about it in a stackexchange post http://apple.stackexchange.com/questions/83816/deleting-this-file-will-break-the -whole-internets-for-the-sake-of-our-children
Best

Unique Error while doing hot backup Cloning!

Dear All,
I am using EBS 11.5.10.2 with DB 9.2.0.6.
I am doing hot backup cloning by referring *[Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=760772.1]*
I am facing a unique issue, when I run adcfgclone.pl dbconfig <my_context_file>, application of my Production Server start misbehaving and it gives me an error:
Node Id does not exist for the current application server id.When I check the FND_NODE table I found that there server id was empty in it.
I have to run than run the following steps as the resolution:
1. Shutdown all the services.
2. EXEC FND_CONC_CLONE.SETUP_CLEAN;
3. COMMIT;
4. Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers,to repopulate the required system tables.
5.start all the services and verify the issue.
Than application behaves normally.
Is there any additional step to be followed while Hot Backup Cloning other than mentioned in the above mentioned ML Doc?
Please suggest,
Anchorage :)

I am facing a unique issue, when I run adcfgclone.pl dbconfig <my_context_file>, application of my Production Server start misbehaving and it gives me an error:
Node Id does not exist for the current application server id.Where did you get this error?
This is very strange, how come this happens in Production, when you are doing cloning in TEST/DEV instance.
Is there any additional step to be followed while Hot Backup Cloning other than mentioned in the above mentioned ML Doc?I feel there are no other additional steps, as I Recently did successfully hotbackup cloning using the same document.

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
-Chris

Hello John!
Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
Well put and understood. What I should have said was:
1.Erase the volume
2.Install Mountain Lion clean
3.Confirm that Mountain Lion is functioning properly
4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
That makes sense and is just as I later suspected.
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
Yes.
This is what I did and everything works perfectly. Thank you so much once again!
-Chris

My Iphone still hanging for 9 hours while doing security backup for actualization...

My Iphone still hanging for 9 hours while doing security backup for actualization... Can anyone help?? And also cannot find backup file..

Now it's Wednesday (2 days since I originally posted) & my iPhone appears to have finally restored all my apps, but it still says it's restoring from iCloud backup. If all my apps are restored, what else could it be restoring? IS it actually restoring anything at this point, or is it still in 'glitch' mode??? I've tried turning it off & back on & it continues to say that it's restoring.

Rescue and Recovery Crashes While Deleting Backup Files

I've seen many threads in regards to Rescue and Recovery crashing while deleting backup files, but no solutions were ever mentioned! I have a T400 (Vista SP2, Intel T9400, 4GB RAM, 300 GB HD) and was quickly running out of disk space. After finding mention of Rescue and Recovery I was able to delete some of the backups but not all. For example I have one from 2008 (18GB) but it won't seem to delete. I let it sit for quite a while (over night) but it still didn't delete. Does anybody have a solution for how to get R&R to delete this files? Or how to delete these files manually? Thanks in advance.

Hi,
in this situation I assume, you are using the GUI for the deletiong of the RnR Backups.
What I always prefer is the rrcmd.exe which you can use with the "delete" whicht so that the backups that you want to will be deleted.
Cheers

Error while doing File to File Scenario

All,
I am trying a simple file to file scenario - where xi picks up the file from a location and maps the message and dumps it in another location.
I am Getting the below error while doing the same .........
Time Stamp Status Description
2009-03-30 14:30:24 Success Channel Test_send_cc: Send binary file "d:\input\input.xml". Size 203 with QoS EO
2009-03-30 14:30:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2009-03-30 14:30:24 Success Trying to put the message into the send queue.
2009-03-30 14:30:24 Success Message successfully put into the queue.
2009-03-30 14:30:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2009-03-30 14:30:24 Error Attempt to delete file "d:\input\input.xml" after processing failed. Retry
2009-03-30 14:30:24 Success The message was successfully retrieved from the send queue.
2009-03-30 14:30:24 Success The message status set to DLNG.
*+2009-03-30 14:30:24 Error Transmitting the message to endpoint http://filip:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.*
2009-03-30 14:30:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Mar 30 14:35:24 GMT+05:30 2009.
And i cant see the meesages using the SXMB_MONI trasaction
please help me resolve ths issue
Regards,
Mahesh.
Edited by: mahesh uma on May 3, 2008 2:12 PM

Hi Uma,
Go through this links::
Hope these links are useful to you..
Urgent: Message not transmitted from AFW to Integration server
Error with huge file
File to JDBC error
Thanks,
Satya Kumar..

While Doing BW Role Uploading Getting message "Linked Objects Not Found" ?

Dear All,
I am trying to upload a BW role from EP , while doing role upoad activity, when I am giving role name, system namein the first step it is identifying the role from the system.
To that role four reports has been attached.
After uploading the role, the role has been get uploaded, but the reports which are attached to the role it is showing that "Linked Objects Not Found", for all the reports.
For all those reports I have checked the web url on BW server it is corect but then also I am getting above message.
Please any one help me out in this scenario.
Regards,
Aditya

The same problem during XI to BI integration as it was told in how-to.

In Depot Plant while Doing MIGO MRP indicator not found

Dear All,
We have one depot plant. for capturing of excise duty while doing MIGO
I have not found the MRP indicator check box in excise ->misc. Tab.
But for doing this same process for other manufacturing plant means non Depot plant I have found the MRP check box in excise ->misc. Tab.
Is there any process to capture the MRP check box indicator in excise ->misc. Tab while doing MIGO for Depot plant or is there any process to book excise duty while doing MIGO for Depot Plant

Please go through the Scenario #: Dealer Procurement in Excisable Depot scenario in the below link.
http://scn.sap.com/docs/DOC-45855

Error ,Field catalog not found while doing billing with DP90

Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babu

hi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue

HT1414 I lost all my data while doing the latest software upgrade, how do I get it back if I dont have a backup on iTunes?

I lost all my data while doing the latest software upgrade, how do I get it back if I dont have a backup on iTunes?

If you don't have a backup, then all your pics/text/notes are gone.
You can sync back music and app. If you were syncing your contacts with a program in itunes, then you'll get that back.
Not sure why you didn't do a backup, especially prior to doing an upgrade.

While doing backups, found a strange file ?

Similar Messages

Maybe you are looking for