While Printing on Second Page the Space for Header is not considered

Dear All
we are using LIPI Line Printer and First page is Printed Correctly but at the time of Printing second page (for another invoice or same invoice second copy) the Space for invoice Header is over written by the Content of the smart form.
In smartform that space for the Invoice Header is left blank.
Please Suggest how to remove the Problem.
Virandra Sharda
9427630630

Hello,
I can't see any relation to DB2 therefore you should ask your question the ABAP Development » Form Printing forum (for any reason I cannot move the thread).
Regards,
Thomas

Similar Messages

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

How to prevent printing empty second page?

Hi,
When the report is printed from the web it is printing a second page which is empty.
Report is a rdf report, when previewed in reports builder it is only one page.
Is there any setting in the report properties to avoind printing second page?
Please let me know.
THanks

I fixed it. I removed the value in "After Report Value" in the report properties and it worked.
Thank you all...

Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software

Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software

No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT

HT1296 is there a way to NOT synch album artwork - I'd rather save the space for music...

is there a way to NOT synch album artwork - I'd rather save the space for music...I have an Ipod Nano 4GB (yes it's old)

This is the iPod Touch forum.
Note that the artwork associated with your albums is probably less than 1% of the size of your media files themselves.

Deleting Album Art? I need the space for music!!!

So, how does one delete the album art from one's iPhone? I don't mind having it in iTunes, but don't have the space for it on my iPhone.
My iTunes library is at 22 GB (and growing, of course) and so space is at a premium.

You can do this but it will greatly complicate your syncing experience. Only way I know to do this is to delete album art in iTunes then re-sync with the iPhone. This will replace the songs on the iPhone with copies that don't have album art. The, back in iTunes, re download all your album art. Unfortunately, the next time you sync the iPhone, iTunes will again try to replace the files on the iPhone with new ones that have album art. As you can see, this could get to be a very big hassle.

Bookmarks are saved yet after using the page icon is still displayed instead of the actual icon for the website. I have followed the directions for "Favicons do not display".

My bookmarks, on a HP Pavilion dv-7-2273cl notebook, are saved yet the page icon is still displayed after using the bookmark instead of the actual icon for the website. I have followed the directions for "Favicons do not display" without any success. This problem is not experienced on my much older Gateway desktop.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

How to change the space for check number using OT45?

How to use OT45 to change the check no.of FF68 Check Deposit? I want to change the variant so that I can increase the space for check number as have come up with a special case can someone please help me out how can I do it via OT45?
Thanks in advance...
Regards
Nitin

Hi Amit,
Yes, I agree that we can create a new variant and can assign it after activating it. But, what I want is that I have created a new variant and check space in FF68 is 3 digits and how can I make changes in OT45's new variant so that cheque space gets changed to 10digit or more.
Please Help.
Thanks in advance...
Regards
Nitin

I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done

I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done?

Have you tried repairing disk permissions : iTunes download error -45054

Error - The attributes for user could not be determined

When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
The attributes for user could not be determined
It does not happen on other transactions (like Sourcing or Issue POs).
The buyer is in the org. plan and I have checked the attributes and they seem ok.
What could be the issue ???
Thanks
-Bakulesh

Hi
<b>Please go through these links -></b>
The attributes for user could not be determined --
'Error in writing attributes' when using function tab
Company code for system missing in user attributes
BBP_POC not working in SRM 5.0
Re: urgent: regarding ATTRIBUTES
Regards
- Atul

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify.

The ELResolvers for JSF were not registered with the JSP container

I'm trying to configure mojarra on tomcat6 (because I want to use Elastic Beanstalk). tomcat complains:
Feb 8, 2011 10:24:17 AM com.sun.faces.lifecycle.ELResolverInitPhaseListener populateFacesELResolverForJsp
INFO: JSF1027: [null] The ELResolvers for JSF were not registered with the JSP container.
I have tried all sorts of combinations of replacing EL2.2 libs in tomcat/lib, putting the libs in WEB-INF/lib, and the context param:
<context-param>
<param-name>com.sun.faces.expressionFactory</param-name>
<param-value>com.sun.el.ExpressionFactoryImpl</param-value>
</context-param>
JSF pages seem to work but I'd rather have a clean startup. Please assist. Thx in advance.

Thx for replying.
I have jstl-1.2.jar:
     <dependency>
               <groupId>javax.servlet</groupId>
               <artifactId>jstl</artifactId>
               <version>1.2</version>
<scope>provided</scope>
          </dependency>
Which version numbers are you referring to in *.xml? The following?
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5">
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
version="2.0">

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

The volume for "Downloads" can not be found

i keep getting this message when i click downloads in the finder sidebar menu. if i want to see something i downloaded i have to actually find the folder and that takes too long. Is there anyway i can stop this message from coming up (The volume for "Downloads" can not be found) when i click on it from the sidebar?

That's a very good question. I have a hunch that it might be the plist file com.apple.sidebarlists.plist which you will find in <home>/Library/Preferences.
The only thing is that I do not know if you can simply move that file to the desktop, close the current Finder window, then open a new Finder window and add the items you need back into the sidebar. Because Finder is running all the time, I would be very wary of doing that just in case it causes drama . Perhaps one of the other Guru users might have a comment on that.
Alternatively search the discussions for possible clues along those lines.
Chris

THE VOLUME FOR "MOVIES" CAN NOT BE FOUND

Not sure if I posted this in the right place. I would appreciate anyone that can help.
I installed iLife 08 yesterday and everything seemed to go fine.
When I go to open my MOVIES folder I keep getting a : "THE VOLUME FOR "MOVIES" CAN NOT BE FOUND" message?
What happened??
More importantly....
On the left hand of my Finder window where it lists DEVICES, PLACES, and SEARCH FOR.... if I click on SEARCH FOR and go to ALL MOVIES....
I was relieved to find all of my movie files still in there.
BUT HERE'S THE PROBLEM:
I was watching some of the movies... and I noticed as soon as I clicked off and started viewing a new movie... the previous movie would disappear from the ALL MOVIES FOLDER... and the number tally would decrease.
I finally realized after 10 movies that files were disappearing... or perhaps being deleted.
I used FIND to try to locate the lost files but no such luck. I can't find them anywhere.
It also appears to be only my WINDOWS MEDIA PLAYER FILES that are disappearing.
What happened to my MOVIES folder? and where are these lost files going? Are they being deleted? UGH UGH UGH!
If anyone can help I'd greatly appreciate. I'm very frazzled.

Welcome to Discussions - This is the G5 forum, you seems to have a G4. I suggest you post in the [iMovie|http://discussions.apple.com/category.jspa?categoryID=141] forum, where you will get better informed help.

While Printing on Second Page the Space for Header is not considered

Similar Messages

Maybe you are looking for