White bar when closing application

Hi, I'm using a black status bar and when I close my application you can see a white bar at the top. A picture is worth a thousand words: http://img80.imageshack.us/img80/4014/whitekg7.jpg. How can I fix this?

Hi !
I was full of hope when I saw the subject of your topic !
Unfortunatly nobody seems to have given an answer yet !
I'm having the same problem and also made a screenshot during the animation you got when the app turns off :
http://www.kisslanding.net/img/statusbarbug.png
I added a UIStatusBarStyle property in the info.plist and set it to UIStatusBarStyleBlackOpaque
This works fine and as long as the app runs I do have a black status bar.
But when the app turns off, during de fade out animation there is a white strip on top of the window as shown in the screenshot.
I tried to set the window and tab bar controller simulated metrics parameters to Black and even none without success
I had a look at the behavior of Shazam which also has a black status bar.
First their plist is not correct since they use UIStatusBarStyleOpaqueBlack instead of ...BlackOpaque. They must get the job done another way !
Then I noticed they have no nib file. So they must build the interface programmatically.
Last, when the app turns off, it seems the picture that fades out does'nt include the status bar at all.
See here : http://www.kisslanding.net/img/shazam.png
Hope someone will help !
Regards

Similar Messages

Faded screen and white bars when waking from sleep on mac mini

I just bought a new mac mini. It is the late 2012 version with Mavericks.
When I wake it from sleep, my screen is blurred out and there is a row of little white bars at the bottom for probably 10 seconds before the full screen comes on.
Why is it doing this? Is that normal?
Thanks

Late-model Macs are configured to enter standby after four hours in sleep while on AC power, in order to comply with a directive of the European Union.
You have three choices. One is to do nothing. Use the machine as designed. That's what I recommend.
The second choice is to disable Power Nap in the Energy Saver pane of System Preferences. Uncheck the box marked Enable Power Nap... in each of the tabs. You won't get the wake delay anymore, but you won't get any of the features of Power Nap either.
The third choice is to increase the delay before standby mode is triggered, or to disable standby mode completely. This is an unsupported option and you're on your own as to the consequences. If you choose to go this route, proceed as below. These instructions are for advanced users only.
Back up all data before making any changes.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Drag across the line below to select it, then copy it to the Clipboard by pressing the key combination command-C:
sudo pmset –a standbydelay
Don't copy the blank space at the end of the line.
Launch the Terminal application.
Paste into the Terminal window by pressing command-V. Press the space bar, then type the delay you want, in seconds. For example, if you want to change the standby delay from the default one hour to eight hours, enter 28800. Don't put commas or other punctuation marks in the number. To disable standby, enter 0 (zero.)
When the command is complete, press return. You'll be prompted for your login password. Nothing will be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. After running it, quit Terminal. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
To disable standby on AC power, enter this command:
sudo pmset autopoweroff 0
and to revert to the default state,
sudo pmset autopoweroff 1

Flashing white bar when installin Windows XP

Hi
I made my partition, format it in NTFS, my Windows XP SP2 copied his file on my drive. After it, the installation programme reboot and then everythings stall. The white bar is flashing on the left top corner.
What shall I do ?

Someone said to try "at the black screen unplug you iMac for 30 secs" solution, so I did - and it worked! The discs now boot again, and XP initial setup runs as you'd expect it to. HOWEVER: every time I install XP now, and by that I mean the initial install, when XP copies everything from the CD, at the restart I get a message about hal.dll being missing from C:\Windows\System32. This is BEFORE the actual XP install take place, this is at the 1st restart after Windows setup has loaded all it's files.
This happens EVERY time now, even on the disc that worked last night. I've tried going back into OS X and removing/recreating the Boot Camp partition, I've tried formatting the partition in FAT and NTFS, no luck - every single time now I get "hall.dll" is missing. This is driving me up the wall.

Macbook crashing when closing applications

Hey all,
I'm having a major issue with my Macbook. In the last 3 days its crashed 5 times. It always seems to happen when I close an application but theres been no link between the app being closed and it crashing.
any ideas anyone?
Cheers

Sat Oct 24 14:22:40 2009
panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x04399b8d, type 13=general protection, registers:
CR0: 0x8001003b, CR2: 0xb03e2c58, CR3: 0x00d3d000, CR4: 0x00000660
EAX: 0x054bbe98, EBX: 0x04907600, ECX: 0x050c4048, EDX: 0x3582bfa6
CR2: 0xb03e2c58, EBP: 0x35243ec8, ESI: 0x358435f0, EDI: 0x35832c4a
EFL: 0x00010a92, EIP: 0x04399b8d, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000420
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x35243cc8 : 0x12b4c6 (0x45f91c 0x35243cfc 0x13355c 0x0)
0x35243d18 : 0x1ab0fe (0x469a98 0x4399b8d 0xd 0x469234)
0x35243df8 : 0x1a1713 (0x35243e10 0x8ec7c7c 0x35243ec8 0x4399b8d)
0x35243e08 : 0x4399b8d (0xe 0x48 0x50c0010 0x20340010)
0x35243ec8 : 0x3582bfc1 (0x4907600 0x358435f0 0x0 0x8ec7ba0)
0x35243f08 : 0x35832c80 (0x4907600 0x358436b0 0x35243f24 0x381f6c)
0x35243f28 : 0x4293b4 (0x4689000 0x43dc980 0x35243f78 0x381fff)
0x35243f78 : 0x13ebde (0x43dc980 0x40c569f 0x8b8ea44 0x0)
0x35243fc8 : 0x1a14fc (0x522b60 0x0 0x1a40b5 0x58a1ba0)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.maudio.usb.conectiv.driver(1.7)@0x35828000->0x35843fff
dependency: com.apple.driver.AppleUSBMergeNub(3.4.6)@0x35366000
dependency: com.apple.iokit.IOAudioFamily(1.6.9fc5)@0x2e414000
dependency: com.apple.iokit.IOUSBFamily(3.4.9)@0x345bd000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L30
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 66115270312337
unloaded kexts:
com.TASCAM.iokit.FW1082 1.6.0f1 - last unloaded 63568087575047
loaded kexts:
com.maudio.usb.conectiv.driver 1.7 - last loaded 65233612635838
com.TASCAM.iokit.FW1082 1.6.0f1
com.paceap.kext.pacesupport.leopard 5.6.1
com.digidesign.iokit.DigiIO 7.4.2f1
com.digidesign.iokit.DigiDal 7.4.2f1
com.apple.driver.AppleUSBAudio 2.6.4b17
com.apple.driver.iPodSBCDriver 1.1.2
com.apple.filesystems.afpfs 9.0.2
com.apple.nke.asp_tcp 4.7.1
com.apple.filesystems.msdosfs 1.5.5
com.apple.iokit.IOUSBMassStorageClass 2.0.8
com.apple.filesystems.cddafs 2.3.0
com.apple.iokit.IOBluetoothSerialManager 2.1.8f2
com.apple.filesystems.autofs 2.0.2
com.apple.driver.DiskImages 199
com.apple.DontSteal_Mac_OSX 6.0.3
com.apple.driver.IOBluetoothBNEPDriver 2.1.8f2
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.AppleIntelGMA950 5.4.8
com.apple.driver.AppleHDA 1.7.1a2
com.apple.driver.AppleIntelIntegratedFramebuffer 5.4.8
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AirPort.Atheros 320.16.2
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.AppleIRController 113
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a17
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.CSRUSBBluetoothHCIController 2.1.8f2
com.apple.driver.AppleUSBTrackpad 1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.AppleUSBMergeNub 3.4.6
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.4.9
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleUSBUHCI 3.3.5
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 158.10.5
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.8f2
com.apple.iokit.IOBluetoothFamily 2.1.8f2
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOUSBFamily 3.4.9
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
Anything wrong???

My MacBook screen shuts off, goes to white.Restores when closing and reopening,then pressing "enter". This happenn frequently,

My display seems to "time out" unexpectedly.
The screen turns white with blue streeks.
I can restore the display by closing then reopening the display and pressing "exit".
I never loose data and the computer then operates normally.

Ok, mine has been doing the same thing. By now probably have it fixed but the battery thing worked for me. I would open it and it would go black or be all flickery. It seemed like and internal problem that would need a screen cable replaced or such but I just took the battery out which I probably haven't done in the 3 and half years I had it and it worked with the direct power supply. And before I even had time to order new battery I put the same one back and it works great again. These people seriously know how to make a computer. Only problem I've ever had.

No progress bar when an application installs?

After signing up I started downloading photoshop. It is more than 2 hours and it was still not completed... There was no progress bar either on the application manager. Any help here? Thank you

Try the direct download.
Assuming that you mean Photoshop CC: http://prodesigntools.com/adobe-cc-2014-direct-download-links.html
Photoshop Elements: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
Make sure you follow the Very Important Instructions on these pages.

Mouse stops responding when closing applications...

When I close an application, the mouse stops responding for about 1-3 seconds. I continue to gesture on the trackpad until it suddenly comes back. It it fairly consistent when it starts...but the behavior doesn't start consistently. A reboot usually helps...but I am not interested in rebooting every time I have a problem with the mouse cursor.

Turns out it is the option to ignore trackpad input in the preferences. When I would close an application, it would think that I was typing and would ignore the trackpad for a second. I turned it off and I am back to normal.

Hanging when closing applications.

For the past couple days I cannot close an app it seems without it hanging. It never really quits completely, rather is still running and I have to force quit the app. Any ideas why? It's getting to be very annoying since my Mac won't shutdown unless all apps are closed, so it hangs while shutting down. Thanks

caravot:
Try this:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
Please post back with an update on whether this helped.
Cheers
cornelius

[GeForceFX] White bar when play vids in MSI Media Center Deluxe II

Hi everyone, im having problems when play vids in the msi mediacenter deluxe II, i download the patch and download new drivers but still the prob, and is wierd becouse in some vids doesnt appears and in other appers more wide than others, Someone know how fixed.

Just got off the phone with my local supplier and apparently this card is MONO only. This means that when you set it up go to the area where you can select audio type and choose MONO then when you switch channels everything will work properly.
Pretty cheap eh? I have another TV tuner card that I bought about 1 year ago from Hauppage and let me tell you that card rocks! I never had any issues with it and the TV broadcast is in dbx stereo. It even includes a neat remote and FM stereo. The TV@nywhere unit has a LOOOONG way to go before it's up to par with other units. :D

Capture white bar solved- mine anyway

In case anyone else is wasting alot of time by looking at all the threads that dont really say what works, I got the WMD1.08 driver from the link from another post:
( http://ftp://download1.nvidia.com/Windows/23.11/WDM_1.08.exe )
and it fixed the white bar problem. It self extracts and installs, and after restarting I didnt have any problems with the white bar when transferring from VHS to the computer. I am using Nvidia FX 5600 and XP home and MSI KT3 ultra board. I am using it for home/recorded videos.
I wanted to post a this to actually help someone and not have to go thru a bunch of replies to someone's question while noone actually says that they tried it and if it worked or not.
I did reinstall my updated video drivers which DIDNT affect the capture drvers, but be careful and save the Navcap.sys and .inf files somewhere to be sure the 1.08 works.

:O X( I'm trying to capture my home videos off of my sharp hi8 video camera.
I'd like to know how the F*&$%ers at Macrovision found a way to copyright my family reuion!
If I ever meet one of them I'm going to tear him a new a**hole
and the other thing is why do I have to spend over a week trying to find what the problem was and now spend more money (of course what the f*@% was I thinking) to fix something that shouldnt even be there.
I'm going to leave a message with MSI and if I don't have an answer by tomorrow evening when I log on again, someone is going to get a video card inserted in a slot they never expected
By the way. I did a search of this forum and other than going back to an old driver(which i spent the last 3 hours of my life that I'll never get back) which didn't work NO ONE HAS SATISFACTORILY ANSWERED THIS QUESTION!
What happened to the other guys did they give up?

How to get torch home screen to just show no apps when menu bar is closed?

Please bear with me, I'm struggling with how to explain this ha ha!
On the torch homescreen, you touch the 'all' bar at the bottom to display the full menu. When you touch the bar again it closes the menu of apps.
When I first got the torch the menu, when closed, displayed just one row of 4 apps (SMS, browser etc) But I must've pressed something unknowingly or changed a setting so it showed no apps at all when i closed the menu. I preferred this as I like the home screen to just show the background on the phone and not look cluttered.
However it changed back recently and is now showing TWO rows of apps now not even just one! and can't for the life of me figure out how to change it back??
Thanks to anyone who helps!
Solved!
Go to Solution.

Just touch and drag down to the bottom of the screen. You'll then see just the arrow ^ (You can adjust that way for 0 to 3 rows of icons.) Then, when you tap the bar with the arrow, you'll get your full screen of icons back.

White bar shows at the top of the screen when dvd played on a mac.

Hi,
I am using DVDSP 3. When I play the dvd on a mac there is a white bar at the top of the screen saying the marker names. If I watch the same dvd on the dvd player hooked up with my tv, it plays fine and does not show any extra area the white bar at the top. Is there any way I can prevent this from happening?

Do worry about it. It sounds like you have coded with the "text track" of the .mov file left superimposed onto the pictures. If you open your original .mov in Quicktime, you can turn off the text track. Then save a reference Quicktime file, and then use this to make your .mp2. Alternatively, change your marker settings when you do a FCP playout (assuming you are using FCP) - turn off the marker export; or make sure that you have chosen compatible settings for your version of DVD SP3. Also, you can write down the timecodes, and put your Chapter markers into DVD SP3 by hand.

Appearence of white patches when application is launched by Acrobat 8.0

Hi All,
When I launch an application(scanner) from acrobat 8.0(createPDF->From Scanner) I can see some white patches on the application but this doesn't happens when scanner is launched as standalone application.
Can any one faced this problem?
Thanks in advance.

You print to the Adobe PDF printer using the PDF Port. That is how AcroTray notes the file that is produced and starts Distiller. Printing to file with the Adobe PDF printer and then opening in Distiller is the base line of PDF creation that all other methods depend on. If this one does not work, then you have a problem. If you can print to file, then open the file in Distiller to get a PDF, then it is typically AcroTray that is the problem. Sometimes you have to kill AcroTray and then restart it.
It sounds like you may need to do a repair on the Acrobat installation. That is done from the control panel. In XP it is in the Add-Remove Programs. It was moved to another icon name in VISTA. It seems MS and Adobe both like to move things around and rename them!
You say you get an error when you check the print-to-file button, or at least that is what I think you said. Is that correct, or were you able to get a PDF with Distiller? Some folks have also found the need to do a repair after a Windows update. You might also want to look at the subversion you have. AA8 is up to either 8.1.7 or 8.2. You can check in the help file and then download any updates from Adobe.com>downloads>updates>Windows Acrobat. Be sure you install any updates in order, they are no cummulative unless it specifically says so.

IChat chat window creates strange white bar in chat box when typing.

I made a topic about this before, but it was archived and not able to reply.
I wanted to include an image of the glitch. Here is a link to it.
http://imgur.com/2YQd0.jpg
This is not an original screen shot, just a very close photoshopped version of it. Which looks exactly like what happens.
As you can see, there is a white bar that appears in iChat chat window after it gets a scroll bar. It appears for me after I type something (so the "..." bubble appears), then delete all of it (so the "..." bubble disappears). After the "..." bubble disappears, this is when I get this white bar at the bottom of the chat window, which disappears in a split second, almost like a flash.
I know this problem is really small, but it never existed in the pervious version of iChat. And the flashing white bar bothers me!! haha. Please fix this Apple! :P

This issue seems to happen regardless of other windows open. I tried resizing the box, I do not see any white. My background image tiles itself. Without a background, you will just have white anyway, so the white bar, if it does appear, is not visible by eye.
After replicating this issue myself again, I noticed this... The person you are chatting with must of responded at least once. Also, you must delete all the text you typed in the text area, not some of it. (You have to make your "..." bubble disappear from the chat window by deleting all of what you just typed.) Once your "..." bubble goes away, it is then where you see the white bar appear over where your "..." bubble just was. And it almost slides/pans down within the chat window.
Also I just noticed, that my whole background slides/pans downward with the white box. As the white box appears, it literally pushes my background image up and then it slides back into place as the white bar slides down and disappears.
By the way, this never happened on OSX 10.4 Tiger's version of iChat. I also believe it did not happen with Leopard as well, but I would have to check with that. But from what I've seen, this is definitely an issue that appeared in the newer version(s) of iChat.
I have recorded a video of the problem so you can see it in action. It should help explain what I just wrote. Here's the link. http://tinypic.com/player.php?v=20gd4hv&s=6
Right now it's to the point where I'm just curious to why it is happening. But I would like to see it go away.

Tool bar gifs are not showing up when the application left idle for long.

Hi,
I have a Java application built with jdk sdk 1.4. This application was earlier on jdk 1.3 and very recently we moved to 1.4.
The problem here is, tool bar gifs don't show up when the application is left idle for long or kept minimized for long. After I minimize and maximize, they show up. Also sometimes few are seen and few are not, and again as I said minimize and maximize, the rest(which were not showing up earlier) turn and therest don't.
What could be the reason. This was not the case in jdk 1.3.
Any help wil be highly appriciated.
Thanx

I have the same issue with 1.4.

White bar when closing application

Similar Messages

Maybe you are looking for