White space connected from top to bottom

I have a white space from top to bottom, but it does not reach the bottom at the Iphone-view. How can I fix this, I want the white space always form top to bottom.
www.doormode.nl

OK that makes more sense. Vertical sounded like the 11" direction and it is hard to imagine a defect that would cause a repeating issue in that direction.
For this case I would suggest the troubleshooting steps shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Get rid of the white space at the top and bottom of the report when Printing as PDF document

Hello All,
I have a wider tablix report which is 29 inches wide. I have given the paper size as custom and width as 29 and height as 11 in report properties.I have deployed it and saved it as PDF document. When I print preview the report I am using the paper size as
tabloid (17 by 11) and selected the orientation as Landscape. I am getting the full report without any stripping but I am getting some extra space at the top and bottom when I print the report. Can anyone help me how to get rid of this space? . I checked the
margins for the report and it was 0in. Please help.
Thank You

Hi There
In Reporting Services (SSRS 2008), there are white spaces preserved in the report body by default. When the white space extends the body size beyond the width of the report, blank pages will be generated. To avoid the issue, you can set the “ConsumeContainerWhiteSpace”
property of the report to “True”.
Please try to adjust your margins (top + side) and hopefully this problem will get resolved
Body Width <= Page Width - (Left Margin + Right Margin)
Horizontal usable area:
X = Page.Width - (Left Margin + Right Margin + Column Spacing)
Vertical usable area:
Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
Body Width <= Page Width - (Left Margin + Right Margin)
Horizontal usable area:
X = Page.Width - (Left Margin + Right Margin + Column Spacing)
Vertical usable area:
Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
If you have any questions please ask.
Many Thanks
Syed Qazafi Anjum
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

PRINTED PHOTO HAS 12 WHITE LINES RUNNING FROM TOP TO BOTTOM

PRINTER - Office Jet Pro K 550
Firmware version SPPOOO9C
Serial # [text removed for privacy]
SID 16127
Firmware error occurs on both Toshiba PCS - 32 bit and 64 bit. .Both PCS are running Vista Ultimate. Error occurs on photo paper as well as regular paper
The line problem began 2 days ago. Problem did not previously exist..
Is there a resolution for this problem
Printer Usage is 4 yrs-4 months and 25 days

OK that makes more sense. Vertical sounded like the 11" direction and it is hard to imagine a defect that would cause a repeating issue in that direction.
For this case I would suggest the troubleshooting steps shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

2 vertical lines, running from top to bottom, have appeared on my screen

2 vertical lines, running from top to bottom, have suddenly appeared on my screen. On a white back ground they appear blue and green. they have a wide space between them. I switched off and on but they are still there. Whats happening?

You don't say what model Mac you have (iMac I assume) or OS version, but it's probably an LCD problem. Do you have access to another monitor? If it doesn't show up on the external monitor, it's your iMac monitor and not the video card. If it shows up on the external, it's the video card. Do you have AppleCare?

Remove white space nodes from jtree

I am trying to create jtree using XML DOM.
But I m not able to remove/ignore the white space elements from DOM.
I am getting output something like this
for example
Server
Text
node1
Text
I want something like this.
Server
node1
I tried all option for removeing the white space
Here I am posting the source
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.FactoryConfigurationError;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import java.io.File;
import java.io.IOException;
import org.w3c.dom.Document;
import org.w3c.dom.DOMException;
// Basic GUI components
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTree;
// GUI components for right-hand side
import javax.swing.JSplitPane;
import javax.swing.JEditorPane;
// GUI support classes
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.event.WindowEvent;
import java.awt.event.WindowAdapter;
// For creating borders
import javax.swing.border.EmptyBorder;
import javax.swing.border.BevelBorder;
import javax.swing.border.CompoundBorder;
// For creating a TreeModel
import javax.swing.tree.*;
import javax.swing.event.*;
import java.util.*;
public class DomEcho02 extends JPanel
// Global value so it can be ref'd by the tree-adapter
static Document document;
static final int windowHeight = 460;
static final int leftWidth = 300;
static final int rightWidth = 340;
static final int windowWidth = leftWidth + rightWidth;
public DomEcho02()
// Make a nice border
EmptyBorder eb = new EmptyBorder(5,5,5,5);
BevelBorder bb = new BevelBorder(BevelBorder.LOWERED);
CompoundBorder cb = new CompoundBorder(eb,bb);
this.setBorder(new CompoundBorder(cb,eb));
// Set up the tree
JTree tree = new JTree(new DomToTreeModelAdapter());
// Iterate over the tree and make nodes visible
// (Otherwise, the tree shows up fully collapsed)
//TreePath nodePath = ???;
// tree.expandPath(nodePath);
// Build left-side view
JScrollPane treeView = new JScrollPane(tree);
treeView.setPreferredSize(
new Dimension( leftWidth, windowHeight ));
// Build right-side view
JEditorPane htmlPane = new JEditorPane("text/html","");
htmlPane.setEditable(false);
JScrollPane htmlView = new JScrollPane(htmlPane);
htmlView.setPreferredSize(
new Dimension( rightWidth, windowHeight ));
// Build split-pane view
JSplitPane splitPane =
new JSplitPane( JSplitPane.HORIZONTAL_SPLIT,
treeView,
htmlView );
splitPane.setContinuousLayout( true );
splitPane.setDividerLocation( leftWidth );
splitPane.setPreferredSize(
new Dimension( windowWidth + 10, windowHeight+10 ));
// Add GUI components
this.setLayout(new BorderLayout());
this.add("Center", splitPane );
} // constructor
public static void main(String argv[])
if (argv.length != 1) {
System.err.println("Usage: java DomEcho filename");
System.exit(1);
DocumentBuilderFactory factory =
DocumentBuilderFactory.newInstance();
//factory.setValidating(true);
//factory.setNamespaceAware(true);
try {
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.parse( new File(argv[0]) );
makeFrame();
} catch (SAXException sxe) {
// Error generated during parsing)
Exception x = sxe;
if (sxe.getException() != null)
x = sxe.getException();
x.printStackTrace();
} catch (ParserConfigurationException pce) {
// Parser with specified options can't be built
pce.printStackTrace();
} catch (IOException ioe) {
// I/O error
ioe.printStackTrace();
} // main
public static void makeFrame() {
// Set up a GUI framework
JFrame frame = new JFrame("DOM Echo");
frame.addWindowListener(
new WindowAdapter() {
public void windowClosing(WindowEvent e) {System.exit(0);}
// Set up the tree, the views, and display it all
final DomEcho02 echoPanel =
new DomEcho02();
frame.getContentPane().add("Center", echoPanel );
frame.pack();
Dimension screenSize =
Toolkit.getDefaultToolkit().getScreenSize();
int w = windowWidth + 10;
int h = windowHeight + 10;
frame.setLocation(screenSize.width/3 - w/2,
screenSize.height/2 - h/2);
frame.setSize(w, h);
frame.setVisible(true);
} // makeFrame
// An array of names for DOM node-types
// (Array indexes = nodeType() values.)
static final String[] typeName = {
"none",
"Element",
"Attr",
"Text",
"CDATA",
"EntityRef",
"Entity",
"ProcInstr",
"Comment",
"Document",
"DocType",
"DocFragment",
"Notation",
// This class wraps a DOM node and returns the text we want to
// display in the tree. It also returns children, index values,
// and child counts.
public class AdapterNode
org.w3c.dom.Node domNode;
// Construct an Adapter node from a DOM node
public AdapterNode(org.w3c.dom.Node node) {
domNode = node;
// Return a string that identifies this node in the tree
// *** Refer to table at top of org.w3c.dom.Node ***
public String toString() {
String s = typeName[domNode.getNodeType()];
String nodeName = domNode.getNodeName();
if (! nodeName.startsWith("#")) {
s += ": " + nodeName;
if (domNode.getNodeValue() != null) {
if (s.startsWith("ProcInstr"))
s += ", ";
else
s += ": ";
// Trim the value to get rid of NL's at the front
String t = domNode.getNodeValue().trim();
int x = t.indexOf("\n");
if (x >= 0) t = t.substring(0, x);
s += t;
return s;
* Return children, index, and count values
public int index(AdapterNode child) {
//System.err.println("Looking for index of " + child);
int count = childCount();
for (int i=0; i<count; i++) {
AdapterNode n = this.child(i);
if (child.domNode == n.domNode) return i;
return -1; // Should never get here.
public AdapterNode child(int searchIndex) {
//Note: JTree index is zero-based.
org.w3c.dom.Node node =
domNode.getChildNodes().item(searchIndex);
return new AdapterNode(node);
public int childCount() {
return domNode.getChildNodes().getLength();
// This adapter converts the current Document (a DOM) into
// a JTree model.
public class DomToTreeModelAdapter
implements javax.swing.tree.TreeModel
// Basic TreeModel operations
public Object getRoot() {
//System.err.println("Returning root: " +document);
return new AdapterNode(document);
public boolean isLeaf(Object aNode) {
// Determines whether the icon shows up to the left.
// Return true for any node with no children
AdapterNode node = (AdapterNode) aNode;
if (node.childCount() > 0) return false;
return true;
public int getChildCount(Object parent) {
AdapterNode node = (AdapterNode) parent;
return node.childCount();
public Object getChild(Object parent, int index) {
AdapterNode node = (AdapterNode) parent;
return node.child(index);
public int getIndexOfChild(Object parent, Object child) {
AdapterNode node = (AdapterNode) parent;
return node.index((AdapterNode) child);
public void valueForPathChanged(TreePath path, Object newValue) {
// Null. We won't be making changes in the GUI
// If we did, we would ensure the new value was really new,
// adjust the model, and then fire a TreeNodesChanged event.
* Use these methods to add and remove event listeners.
* (Needed to satisfy TreeModel interface, but not used.)
private Vector listenerList = new Vector();
public void addTreeModelListener(TreeModelListener listener) {
if ( listener != null
&& ! listenerList.contains( listener ) ) {
listenerList.addElement( listener );
public void removeTreeModelListener(TreeModelListener listener) {
if ( listener != null ) {
listenerList.removeElement( listener );
// Note: Since XML works with 1.1, this example uses Vector.
// If coding for 1.2 or later, though, I'd use this instead:
// private List listenerList = new LinkedList();
// The operations on the List are then add(), remove() and
// iteration, via:
// Iterator it = listenerList.iterator();
// while ( it.hasNext() ) {
// TreeModelListener listener = (TreeModelListener) it.next();
* Invoke these methods to inform listeners of changes.
* (Not needed for this example.)
* Methods taken from TreeModelSupport class described at
* http://java.sun.com/products/jfc/tsc/articles/jtree/index.html
* That architecture (produced by Tom Santos and Steve Wilson)
* is more elegant. I just hacked 'em in here so they are
* immediately at hand.
public void fireTreeNodesChanged( TreeModelEvent e ) {
Enumeration listeners = listenerList.elements();
while ( listeners.hasMoreElements() ) {
TreeModelListener listener =
(TreeModelListener) listeners.nextElement();
listener.treeNodesChanged( e );
public void fireTreeNodesInserted( TreeModelEvent e ) {
Enumeration listeners = listenerList.elements();
while ( listeners.hasMoreElements() ) {
TreeModelListener listener =
(TreeModelListener) listeners.nextElement();
listener.treeNodesInserted( e );
public void fireTreeNodesRemoved( TreeModelEvent e ) {
Enumeration listeners = listenerList.elements();
while ( listeners.hasMoreElements() ) {
TreeModelListener listener =
(TreeModelListener) listeners.nextElement();
listener.treeNodesRemoved( e );
public void fireTreeStructureChanged( TreeModelEvent e ) {
Enumeration listeners = listenerList.elements();
while ( listeners.hasMoreElements() ) {
TreeModelListener listener =
(TreeModelListener) listeners.nextElement();
listener.treeStructureChanged( e );
}

DocumentBuilderFactory can be configured to ignore white space.
http://java.sun.com/j2se/1.5.0/docs/api/javax/xml/parsers/DocumentBuilderFactory.html#setIgnoringElementContentWhitespace(boolean)

Fade from top to bottom

i'm creating a menu in Motion and the menu will run 60 seconds in that time a want an object thats in my menu to fade from full opacity to nothing, sounds easy but i want this to fade out from top to bottom over 60 seconds. I understand the keyframe side of it but trying to figure out how to fade from top to bottom.Thanks

Create a gradient that is white to white. Put a ramp parameter behavior on th color at one end to fade it down to black. Add another ramp behavior for the other color only have it start half way thru your timeline. Then use that gradient as a luminance mask.
Patrick

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

International warranty: face glass with hairline crack across the face: My local icenter says that if the hairline crack was from top to bottom then it would be covered by the warranty

Hi
I have been to my local icenter in Malta because of a hairline crack across the face of my newly purchased iphone 5c. They say that it will only fall under the warranty if the crack was from top to bottom and not across. Is this correct?
Thank you

Did you contact your carrier about that? Your carrier will service the phone for you in Malta, and they can probably tell you more about that problem.
Apple - Support - Service Answer Center

How do I get photos to be organized in lightroom such as moving one from top to bottom....etc

Hi, Can anyone help me? I need too know how to move pictures around in lightroom., Such as moving 1 from top to bottom or in the middle to the bottom?

If you create Collections in Lightroom, you can simply drag the photo to wherever you want it to be within the Collection.

Scrolling is very slow and looks like it's re-rendering from top to bottom on each scroll.

After downloading Firefox 4, scrolling isn't work well. Each time I scroll up or down, the page looks like it's re-rendering by wiping from top to bottom. Takes about 2 seconds to so before I can scroll any further. There's no smoothness to scrolling like there was in the past.
I tried downloading new graphics drivers, but that didin't fix the issue. I tried checking "smooth scrolling" in advanced options, but that made it worse.

Update the video display driver to the latest version.
* https://support.mozilla.com/kb/How-do-I-upgrade-my-graphics-drivers
Try to disable hardware acceleration in Firefox 4.0:
* Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available"

Left & Right Margin from Top to Bottom

Friends,
I want Left & Right Margin (Line) from top to bottom even if there is a single item in the Repetitive area. Problem is that when there are less items there is always a gap between Repetitive Area/End of Report & Footer.
Regards,
Uday Shankar
Edited by: uday singh on Jun 13, 2008 5:30 PM

Hi,
We have also tried to the same requirement. But we can't.
Only one thing we can do is, the end report can be set at the bottom with the property of "Align to bottom". But the Horizonal, vertical lines and grid not fills from the last item to end of report beginning.
I think this is most required to view the document perfectly or neatly.
Particularly in indian localization this is the must since the customer need to be declared the specific neat format to the legal departments.
Hope SAP Support should solve the issue. But I am wondering this question has been posted many times by many people but unfotunately nobody I think get the solution.
Thanks & Regards,
Venkatesan G.

M40-237: small lines from top to bottom on the screen

I have installed DirectX 9c Feb 2006.
When I'm Trying to play a game , in the center of the screen there are small horz. lines from top to bottom.
How can I solve this problem ?
Thanxs.

Hi
Before you try to solve it you must find out why this happen. As far as I know this unit is delivered with DirectX V9.0C. Did you have this problem before latest DirectX installation?
Are those lines there just when you start the game or all the time?

Cp6 - effects (how to fade in from top to bottom?)

Hello all,
I am attempting to simulate an effect I often used in Lectora. I used this effect on text bullets where the text would slowly appear (fade in) one line at a time from top to bottom.
Is there a similar effect in Captivate 6. I gave up looking for it.
Also, has anyone bothered to catalog and demonstrate all the effects available in Captivate 6? If not, perhaps I will take on this project next month.... seems worthwhile.
Thank you,
Shawn

Thank you for your response Lieve.
Lilybiri wrote:
Please: http://lilybiri.posterous.com/list-with-effects-in-captivate-555-thank s-col
They didn't change in CP6
You have to make each line a separate Text container (caption or smart shape) and apply the effect on each line, stagger them on the timeline
Lilybiri
The list is great...
I suspected that was the only way. That is far too much work for all the bullets that I would like to animate. I'll have to do without.
But I appreciate your post.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Oh wow, looks like a new feature.
The "page" links in a stylesheet with the address "resource://gre/res/TopLevelImageDocument.css". If you remove that reference, then the image displays in the old style.
'''''Edit: Please skip the rest of this post and check out the next one.'''''
There might be a more elegant solution than that, but you could use a bookmarklet to strip out that link when you want to view the page in its old style. A bookmarklet is a snippet of JavaScript you save on the Bookmarks toolbar for quick access.
First, copy the following code to the clipboard (it's all one long line):
<br>javascript:var ssheet=document.querySelector('link[href="resource://gre/res/TopLevelImageDocument.css"]'); if(ssheet)ssheet.parentNode.removeChild(ssheet); void 0;
Next, if you are not displaying the Bookmarks Toolbar, use View > Toolbars > Bookmarks Toolbar to display it. (If you aren't using the classic Menu bar, press Alt+v to call up the old View menu. Right-clicking the gray area just below the page address also allows you to display the Bookmarks Toolbar.)
Right-click on the Bookmarks Toolbar (or Mac equivalent of right-click!) and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., Oldstyle Picture) and click Add.
Now, when you want to tweak the image display, click the button to run the script.
Manual clicking is a hassle, so it might make sense to look into other solutions. (Greasemonkey didn't seem to work; I think it might not run on .jpg files.)

White space connected from top to bottom

Similar Messages

Maybe you are looking for