Who created this Forum?

Isn't one HR forum enough?

Hello,
Kindly refer
How to use this Forum
Welcome to the HCM Payroll North America Forum!
This is a combined Forum for the HCM Payroll Versions of USA and Canada.
In order to be able to distinguish these twocountry versions we kindly ask you to use the prefix
US - for USA (PY-US)
CA - for Canada (PY-CA)
in the Short Text/ Header of your thread.
Our Moderators will also frequently check these country assignments.
Please also help us improving the ERP Human Capital Management WIKI specifically in these areas:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/ERPHumanCapital+Management
http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAPHCMPayroll+USA
http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAPHCMPayroll+Canada

Similar Messages

Warning when trying to launch application over mapped drive "We can't verify who created this file. Are you sure you want to run this file?"

We have 2 load balanced application servers that map drives with programs on them for users from a central server that are giving the warning "We can't verify who created this file. Are you sure you want to run this file?". Basically how it works
is a user logs in to one or the other application servers (for example, 10.0.0.1 or 10.0.0.2) and runs a log on script that maps an L:\ drive to the users folder on the central storage server (10.0.0.100). When the user goes to launch the .exe from the L:\
drive it presents that warning.
I've looked around and have seen recommendations that you need to add the site to the local intranet zone for IE, but when I try to add L:\ it tells me that I have entered an invalid sequence. It appears that you can only put network shares in that location,
which is not how we're mapping the drive.
Has anyone run in to this before and knows how to resolve it?
Thanks!

Hi,
A mapped drive letter is not supported so please try to input \\server or \\server\folder to see if it will help.
If you have any feedback on our support, please send to [email protected]

Who Runs This Forum

i am told that this forum is not run by BT. Yet it has the BT logo. And Sages on here post tens of thousands of posts. It's almost like they are employed to do it. What is going on. Come on, this is a BT run forum isn't it?

This is a customer to customer self help forum posts made here do not go to BT although the forum is moderated by BT not every post is read and posts do not go to BT directly
this link explains more https://community.bt.com/t5/Announcements-Terms/BTCare-Community-Forums-User-Guidelines/m-p/1375043#...
Everyone here are BT customer like yourself NONE OF US ARE EMPLOYED BY BT with the exception of the forum moderators who are the only BT employees here
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I get "We can't verify who created this file" for every PPT or PPTX file I open on my local network (Win 7 only, not Win 8)

I've searched around, and perhaps I've missed it, but I have a specific problem that just started today (4/1/2014). I have 3 PCs in a local home network and they all have been sharing things fine so far. PC1 is my main storage computer (Windows
7), another is a laptop (Windows 7) and a third is a laptop (Windows 8.1).
On the Windows 7 laptop, when I open Windows Explorer and navigate my way to a file I want to open (which is stored on PC1) and double click on the file to open it USED to just open using the right program (PowerPoint2007) which I have fully installed on
the Win 7 laptop. Note also that "Microsoft Office (2010)" came pseudo-loaded on the laptop, but I have set the default for all PPT and PPTX files to be opened using PowerPoint2007. I've had a few hiccups in the past where this undesired,
not-fully-loaded version tries to get in the way of me opening files with PowerPoint2007, but right now all files are set to open using PowerPoint2007.
So I'm not going on the internet, I'm not using IE, and this is only happening with PPT and PPTX files and only on my Win 7 laptop. DOC/DOCX and XLS/XLSX files open fine with the 2007 version of the Word and Excel respectively. All files, including
the PPT and PPTX files on PC1 are openable without trouble on the Win8 laptop with PowerPoint2007.
Any idea why this would suddenly start happening?

Sorry, I should have said that I'm having this issue on Win7 Enterprise SP1 and not XP.
I'm having trouble understanding how cacheing is related to how windows resolves this security violation, and why changing the Internet's custom security settings makes the caching problem go away? You are correct in that running a mdb file from
the desktop does not produce the warning; however this is a database housed on a shared drive so that the database is accessable to other users...
unfortunately unblock is not presented as an option in the file properties, and even if it was that seems a bit impractical to do for every single zip file on a share drive which would accumulate more files as multiple users add to it.
Also: I have two computers with the same settings in both the trusted sites and the Launch apps, but one opens fine and the other does not.

Attention to all Verizon employees who visit this forum.

I think its safe to say. That you guys don't know what's going on. You are only doing your job, which is listening to customer complaints. So don't get defensive when a customer is upset because one of your colleagues lied to them. What you job should be is tracking down our missing Ipads. I have been waiting 4 weeks with no Fedex tracking number, no reason why its taking so long, and quite frankly I don't think Verizon cares about their customers. I was told it would take 2-3 weeks, then it changed to 3-4 weeks. What company do you know of, behaves this way. Very unprofessional. So do your real job, and track down those missing Ipads for your Verizon customers. Ohhh, I get it. Verizon forgot to order them. That's why its taking so long. Whatever the excuse corporate comes up with today, don't tell us. Just keep it to yourself. I won't believe it anyway. You guys lie to much.

This "Japan disaster" excuse isn't valid. Apple said their inventory is FINE. They said the quake would only affect things months down the road if the diaster isn't corrected by then. They had more than enough stock and suppy ready. Also, most of the components (actually, nearly all of it) except for the glass and battery (both from Japan) come from South Korea, which was not affected by the disaster at all. The problem is VZW and their terrible management of the situation. Why is AT&T and Apple not having any problems?

Continue to erm... I'll award five points to anyone who answers this forum!

How do you get videos from your computer onto iTunes?

Short movie clips, like homemade movie type things off of windows media player. So that they can go onto my ipod.

Who created Invoice in AP , need user_id

Hi,
When Invoice is created in AP , record is inserted into AP_INVOICES_ALL table
How will i know who created this invoice , I'm looking for user_id of the person who
created this invoice.
Thanks.

Please use this script:
select inv.invoice_id, inv.invoice_num, us2.user_name
from ap_invoices_all inv,
fnd_user us2
where inv.created_by = us2.user_id
Edited by: Stag609 on Oct 11, 2011 10:58 AM

Who is creating general forum topics _? i wanna jasper reports topic ...

who is creating general forum topics like
Developers Home > Developer Forums > Java Forums > Enterprise & Distributed Computing > Web Applications > JavaServer Pages (JSP) and JSTL >
i have troubles with jasper reports . but i solved lots of them . this site is great , but i can not find jasper reports topics easily . i help where i find a jasper reports problem as i can help . but when i need help about it , i am creating topics like here . and normally , here are not much answers for me , because the general topics is " jsp and jstl " .
i hope i could tell my problem with topics ; i hope someone helps me about it ...

who is creating general forum topics like
Developers Home > Developer Forums > Java Forums > Enterprise & Distributed Computing > Web Applications > JavaServer Pages (JSP) and JSTL >
i have troubles with jasper reports . but i solved lots of them . this site is great , but i can not find jasper reports topics easily . i help where i find a jasper reports problem as i can help . but when i need help about it , i am creating topics like here . and normally , here are not much answers for me , because the general topics is " jsp and jstl " .
i hope i could tell my problem with topics ; i hope someone helps me about it ...

Thank you, all of you who help out on this forum.

I just wanted to thank y'all for all of the help that people give on this forum and in other places. It's great to see so many folks helping others to succeed in making art and doing creative work.
Here's a blog post where I thank several folks specifically.

Awwwwww, Todd; I'm on your list!
I wouldn't be where I am today without forum posters on CreativeCOW.net and here. I want to add my thanks to Todd and Adobe for offering such a great product and who create such a great community of support. And thanks to everyone on the forums to whom much thanks is owed and is rarely given.

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Make this forum also available for those who use others browsers then IE

I can create a message in this forum from IE, but for Chrome it is closed
Success
Cor

Hi Cor,
I'm able to create new threads in other forums with Chrome:
http://social.technet.microsoft.com/Forums/en-US/e4bf5833-895e-4c89-8a96-8ef44b3bae82/test-post-using-chrome?forum=tnsandbox
Is this happening for you across all forums or just in one specific forum?
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

How do I sign in to this Forum? I created a user... asked a question but I need to log on again to c

I need to log on to this Forum!

You must have been signed-in to have started this thread, so why do you think that you're not signed in?
Isn't your forum name displayed at the top-right of the forum page?

From reading this forum and my own it experance the HP "eprint" email server is flawed!

Having read on this forum and from my own experience only a limited number of email providers email addreses will be accepted by the eprint email address it certainly does not accept emails from hotmail.com and hotmail.co.uk they bounce almost before they are sent!!!
So own up HP I bought in to your sales BS and there certainly wasn't any caveats saying that you eprint system does it did not work with certain email providers.
I note that someone calling himself an interested employee of HP has been suggesting that its the providers fault, well I have been using hotmail for donkeys years and the only time my emails have bounced is when I have incorrectly entered the wrong send address configuration or the attachments were too large!
I am getting on, but for the life of me I cannot found any eprint support contact email address on their web page, is there one? or is HP hoping that their customers will sort out their problems for them?
For the record I can see my printer on line via the eprint web site and all the reports are correct so its not a fault at my end .
So HP if you actually monitor this forum get your act together and give us what your sales blurb said it would!

For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may
help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and
then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at
a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from
completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to
reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no
ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee

"You do not have permission to post in this forum"

I have another account that cannot do anything much at all, and I would like to get it fixed without a five day wait for a Genius Bar appointment, then a 1 hour bus trip each way with an "I can't help with that" in the middle.
The account has been broken for over a year. This is what happens:
I can submit a question to the community.
I can open any postings that show as matches.
If there are no matches and I get thrown to the list of communities, then I can't view or post to any of them. I see the product names and icons (iPad, for example, but the list of related communities on the right is missing for all products. Which seems unfair because I own most of them.
You do not have permission to post to this forum
It appears you are not allowed to view what you requested. You might contact your administrator yadda yadda.
I have posted about this before:
https://discussions.apple.com/message/17393255#17393255
with no real answer (a threat of possible help, if you like, but with no resultant benefit.)
My question is - how does one get help with the help forums? I have phoned Apple's help desk and they said they could not do anything.
I would really like to get my primary account working - it connects to the right email address, it all set up and comfortable - and it does not use my name and location as an alias (who's idea was that? Fire that person!)
If you know of any court of appeal, help desk support forum support line, 21-step program or anything else that might help, please tell me. This has gone on long enough.
I tried to do something about this from the other account but to get support for the support communities you have to be able to post to them.
"That's some catch, that Catch-22"
"It's the best there is."
Thanks in advance for your help.
PG.

Seventy-one - To my knowledge, I have been a model citizen. And not impertinent of you at all - a very reasonable question. All words have been 1-3 or 5+ letters long, I certainly have not received any communication (that I have been able to find) that indicates a transgression. And there is another question - which castle, and are you saving for the deposit?
Bleach - other user name is "Ploughguy". But I was more after a means of contacting those with influence myself. Most fora like this have a contactable moderator or administrator. I am rather amazed that one needs the intercession of the saints. Such as St Roger...
Roger - This situation. The "can't look-can't post" situation. It has been (not) happening for some time.
I previously raised the issue here .
BTW, I created yet another ID because I was not careful enough when I set up the second ID and it defaulted to "NameFromSuburb". This is OK for johnfromnewyork but a huge privacy risk if you are ranulffromlittlestorpingintheswuff - an unusual name in a small place. I do not know how that default got through the peer review. Basically it says "ranulf has the good taste to own an Apple something which is portable and fenceable, and he lives not far from here". I have suggested to the privacy people that it is a very bad idea. And yes, I realise my alias is already out there. I have asked the privacy people to blow it away.

How to find out who created a custom table

I have searched the forum but didn't find an answer so thought I would put it out here.
I have a bunch of custom tables that have been created and not assigned to table groups. Some are SM30 wrappers and some aren't. They are all defaulted to &NC& which is a no-no to assign to roles. My question is, how can I see who created these tables so that I can contact them and educate them on table groups? I can't seem to figure this out.
For instance, I have a custom t-code that calls a custom view and the view is assigned to &NC& in TDDAT.
Any help appreciated

Bobbi,
Try SE15->ABAP Dictionary->Database Tables->"enter table name" and execute->select table and view->Attributes Tab->Last changed on/by. Field "Last changed on/by" will give you an idea who the last user that made modification on this table.
Good Luck
-John N.

Who created this Forum?

Similar Messages

Maybe you are looking for