Who I can read the right value of '�' character ? Thanks!

Hi, I created a text file using plain editor ( notepad), when I try to read the character '�' a got the � symbol.
What I have to do ?
Thanks in advance.

There is no � in ASCII.
If you are putting it in java source code, you will
have to substitute with a /u00F1Sorry, make that a \u00F1

Similar Messages

Read the signal value that pass over the upper and lower limit..

how to create the system which can read the signal value that pass the lower and upper limit? i've try but the system only read the value that in range of upper and lower limit..thanks..

Im not very sure if this system can read the value that pass over the limit..because at the save file data so many value(i will attach that file)..and i dont know how to setting to get the failure values only..
Actually i want to build some system that can read and save value that pass over the limit..i take the signal from simulation sine signal..no hardware required..
im very new with this software and im in learning process..
A very big thanks to all that helping me..
save file data from the system
Channels 8
Samples 1 1 1 1 1 1 1 1
Date 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05 2012/03/05
Time 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216 12:30:11.099999 12:30:11.216 12:30:11.216 12:30:11.216
X_Dimension Time Time Time Time Time Time Time Time
X0 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1 1.0000000000000001E-1
Delta_X 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000
***End_of_Header***
X_Value Sine (Negative Peak) Failures (Negative Peak) Upper Limit (Negative Peak) Lower Limit (Negative Peak) Sine (Positive Peak) Failures (Positive Peak) Upper Limit (Positive Peak) Lower Limit (Positive Peak) Comment
0.100000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
0.200000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
0.300000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
0.400000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
0.500000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
0.600000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
0.700000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
0.800000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
0.900000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
1.000000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
1.100000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
1.200000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
1.300000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
1.400000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
1.500000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
1.600000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
1.700000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
1.800000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
1.900000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
2.000000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
2.100000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
2.200000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
2.300000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.400000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.500000 -6.996546 -6.996546 5.000000 -5.000000 6.999999 6.999999 5.000000 -5.000000
2.600000 -6.996546 -6.996546 5.000000 -5.000000 7.000000 7.000000 5.000000 -5.000000
2.700000 -6.996683 -6.996683 5.000000 -5.000000 6.999994 6.999994 5.000000 -5.000000
2.800000 -6.996817 -6.996817 5.000000 -5.000000 6.999988 6.999988 5.000000 -5.000000
2.900000 -6.996948 -6.996948 5.000000 -5.000000 6.999978 6.999978 5.000000 -5.000000
3.000000 -6.997076 -6.997076 5.000000 -5.000000 6.999965 6.999965 5.000000 -5.000000
3.100000 -6.997202 -6.997202 5.000000 -5.000000 6.999950 6.999950 5.000000 -5.000000
3.200000 -6.997325 -6.997325 5.000000 -5.000000 6.999932 6.999932 5.000000 -5.000000
3.300000 -6.997445 -6.997445 5.000000 -5.000000 6.999912 6.999912 5.000000 -5.000000
3.400000 -6.997563 -6.997563 5.000000 -5.000000 6.999888 6.999888 5.000000 -5.000000
3.500000 -6.997677 -6.997677 5.000000 -5.000000 6.999862 6.999862 5.000000 -5.000000
3.600000 -6.997789 -6.997789 5.000000 -5.000000 6.999833 6.999833 5.000000 -5.000000
3.700000 -6.997898 -6.997898 5.000000 -5.000000 6.999801 6.999801 5.000000 -5.000000
3.800000 -6.998005 -6.998005 5.000000 -5.000000 6.999766 6.999766 5.000000 -5.000000
3.900000 -6.998108 -6.998108 5.000000 -5.000000 6.999729 6.999729 5.000000 -5.000000
4.000000 -6.998209 -6.998209 5.000000 -5.000000 6.999689 6.999689 5.000000 -5.000000
4.100000 -6.998307 -6.998307 5.000000 -5.000000 6.999646 6.999646 5.000000 -5.000000
4.200000 -6.998403 -6.998403 5.000000 -5.000000 6.999601 6.999601 5.000000 -5.000000
4.300000 -6.998495 -6.998495 5.000000 -5.000000 6.999552 6.999552 5.000000 -5.000000
4.400000 -6.998585 -6.998585 5.000000 -5.000000 6.999501 6.999501 5.000000 -5.000000
4.500000 -6.998672 -6.998672 5.000000 -5.000000 6.999447 6.999447 5.000000 -5.000000
4.600000 -6.998756 -6.998756 5.000000 -5.000000 6.999391 6.999391 5.000000 -5.000000
4.700000 -6.998838 -6.998838 5.000000 -5.000000 6.999331 6.999331 5.000000 -5.000000
4.800000 -6.998917 -6.998917 5.000000 -5.000000 6.999269 6.999269 5.000000 -5.000000
4.900000 -6.998993 -6.998993 5.000000 -5.000000 6.999204 6.999204 5.000000 -5.000000
5.000000 -6.999066 -6.999066 5.000000 -5.000000 6.999136 6.999136 5.000000 -5.000000
5.100000 -6.999136 -6.999136 5.000000 -5.000000 6.999066 6.999066 5.000000 -5.000000
5.200000 -6.999204 -6.999204 5.000000 -5.000000 6.998993 6.998993 5.000000 -5.000000
5.300000 -6.999269 -6.999269 5.000000 -5.000000 6.998917 6.998917 5.000000 -5.000000
5.400000 -6.999331 -6.999331 5.000000 -5.000000 6.998838 6.998838 5.000000 -5.000000
5.500000 -6.999391 -6.999391 5.000000 -5.000000 6.998756 6.998756 5.000000 -5.000000
5.600000 -6.999447 -6.999447 5.000000 -5.000000 6.998672 6.998672 5.000000 -5.000000
5.700000 -6.999501 -6.999501 5.000000 -5.000000 6.998585 6.998585 5.000000 -5.000000
5.800000 -6.999552 -6.999552 5.000000 -5.000000 6.998495 6.998495 5.000000 -5.000000
5.900000 -6.999601 -6.999601 5.000000 -5.000000 6.998403 6.998403 5.000000 -5.000000
6.000000 -6.999646 -6.999646 5.000000 -5.000000 6.998307 6.998307 5.000000 -5.000000
6.100000 -6.999689 -6.999689 5.000000 -5.000000 6.998209 6.998209 5.000000 -5.000000
6.200000 -6.999729 -6.999729 5.000000 -5.000000 6.998108 6.998108 5.000000 -5.000000
6.300000 -6.999766 -6.999766 5.000000 -5.000000 6.998005 6.998005 5.000000 -5.000000
6.400000 -6.999801 -6.999801 5.000000 -5.000000 6.997898 6.997898 5.000000 -5.000000
6.500000 -6.999833 -6.999833 5.000000 -5.000000 6.997789 6.997789 5.000000 -5.000000
6.600000 -6.999862 -6.999862 5.000000 -5.000000 6.997677 6.997677 5.000000 -5.000000
6.700000 -6.999888 -6.999888 5.000000 -5.000000 6.997563 6.997563 5.000000 -5.000000
6.800000 -6.999912 -6.999912 5.000000 -5.000000 6.997445 6.997445 5.000000 -5.000000
6.900000 -6.999932 -6.999932 5.000000 -5.000000 6.997325 6.997325 5.000000 -5.000000
7.000000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000
7.100000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
7.200000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
7.300000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.400000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.500000 -6.999999 -6.999999 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.600000 -7.000000 -7.000000 5.000000 -5.000000 6.996546 6.996546 5.000000 -5.000000
7.700000 -6.999994 -6.999994 5.000000 -5.000000 6.996683 6.996683 5.000000 -5.000000
7.800000 -6.999988 -6.999988 5.000000 -5.000000 6.996817 6.996817 5.000000 -5.000000
7.900000 -6.999978 -6.999978 5.000000 -5.000000 6.996948 6.996948 5.000000 -5.000000
8.000000 -6.999965 -6.999965 5.000000 -5.000000 6.997076 6.997076 5.000000 -5.000000
8.100000 -6.999950 -6.999950 5.000000 -5.000000 6.997202 6.997202 5.000000 -5.000000

How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi

Hai to all,
how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
Thank you for helping.
Attachments:
block diagram.jpg ‏48 KB

hafizzuddin wrote:
thank you for the opinions, for now i am not using any express Vi..
In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Screen won't light on an iphone 3. Phone works and if I look real closely in just the right light, I can read the dark screen. Any idea where to go to have this fixed and how much it might cost?

Screen won't light on my iphone 3. Phone works and if I look REALLY HARD in just the right light, I can read the dark screen. Any idea where to go to have this fixed and how much it might cost?

Have a look here:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5
$229
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
copied from Apple - Support - Service Answer Center

Is there an app that can read the adresse in calender and use it in a gps app so you dont have to right it 2 times.

Is there an app that can read the adresse in calender and use it in a gps app so you dont have to right it 2 times.

If it is a complete address, and is formated properly, it should appear as a link. Tap on it and it will open the Maps App.

How do I read the selected value of a comboBox?

I need to send the selected value of a comboBox in an HTTPService request. How do I read the selected value (not label or item or index) from the comboBox?

> (not label or item or index)
I suspect 'item' is what you need actually. Specifically the 'selectedItem' property which returns the whole of the selected object from your dataprovider. From that you can then extract the selected object's properties.
e.g. selectedValue = myComboBox.selectedItem.value;
The example in tour-de-flex shows this - note: 'data' in that example is i think what you call 'value'.
http://tourdeflex.adobe.com/flex4.0/ComboBox/sample.html (right-click to view source)
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/spark/components/suppor tClasses/ListBase.html#selectedItem
hth
Paul Evans
http://www.creative-cognition.co.uk/
http://blog.creacog.co.uk/

Java API to read the Encrypted Values from Windows Registry settings

Is there any Java API to read the Encrypted Values from Windows Registry settings ?
My Java Application invokes a 3rd party Tool that writes the key/value to windows registry settings under : “HKLM\Software\<3rdparty>\dataValue”.
This entry is in BINARY and encrypted with 3DES, using crypto API from Microsoft.
3rd party software to encrypt the data stored in registry it
either uses C++ code: and uses the call “CryptProtectData” and “CryptUnProtectData” or
If it is a .NET (C#) it uses the call “Protect” or “UnProtect” from class “ProtectData” of WinCrypt.h from the library “Crypt32.lib.
Note: The data is encrypted using auto-generated machinekey and there is no public key shared to decrypt the Encrypted data.
Since the data is encrypted using auto-generated machinekey the same can be decrypted from a .Net / C++ application using CryptUnprotectData or UnProtect() API of WinCrypt.h from the library “Crypt32.lib.
To know more about Auto-Generated MachineKey in Windows refer the links below
http://aspnetresources.com/tools/machineKey
http://msdn.microsoft.com/en-us/library/ms998288.aspx
I need to find a way in Java to find the equivalent API to decrypt (CryptUnprotectData) and Microsoft will automatically use the correct key.
But i couldn't find any informato related to Java APIs to enrypt or decrypt data using auto-generated machinekey.
Is there a way to read the encrypted data from Windows regsitry settings that is encrypted using the Auto-Generated Machine Key ?
Kindly let me know if Java provides any such API or mechanism for this.

If the symmetric key is "auto-generated" and is not being stored anywhere on the machine, it implies that the key is being regenerated based on known values on the machine. This is the same principle in generating 3DES keys using PBE (password-based-encryption). I would review the documentation on the C# side, figure out the algorithm or "seed" values being used by the algorithm, and then attempt to use the JCE to derive the 3DES key using PBE; you will need to provide the known values as parameters to the PBE key-generation function in JCE. Once derived, it can be used to decrypt the ciphertext from the Regiistry in exactly the same way as the CAPI/CNG framework.
An alternate way for Java to use this key, is to write a JNI library that will call the native Windows code to do the decryption; then the Java program does not need to know details about the key.
That said, there is a risk that if your code can derive the key based on known seeds, then so can an attacker. I don't know what your applicatiion is doing, but if this is anything related to compliance for some data-security regulation like PCI-DSS, then you will fail the audit (for being unable to prove you have adequate controls on the symmetric key) if a knowledgable QSA probes this design.
Arshad Noor
StrongAuth, Inc.

How to read the selected value of a dropdown list box

Hello,
I have 2 custom fields which are of type dropdown list on Accounts(CRMM_ACCOUNT) PCUI application details tab.I need to read the selected value of first dropdown list item,based on that second dropdown list will be populated.
I know where to populate the dropdown list box,it is in FILL_DROPDOWN_LISTBOX.
I dont know how to trap the selection made on dropdown list.
PLease guide me on how to trap the dropdown list field selection value.
Thanks in advance.
Thirumala.

Hello,
Check what is done in standard for the fielf REGION which is inked to the country.
Otherwise, you can do the following :
- in field group customizing, for field 1, flag the 'send request' flag. So, when you change the value in this field via the dropdown, the MAC methods are immediately called.
- Put the new value in a global variable (GV).
- in the fill_dropdown_listbox method, get the value from this GV and based on it, filter the values for the dropdown of field 2.
Hope this will help you,
Regards,
Frederic

We purchased an Acrobat 9 Professional and no longer have the installation media. Where we can download the right software according with the license we have?

We purchased an Acrobat 9 Professional and no longer have the installation media. Where we can download the right software according with the license we have? We want to install it on Windows 7 64 bits

http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Be sure to make a backup of this download to a CD or backup HD for the future. You will still need your S/N.

Reading the output values after each step executes in LabVIEW User Interface

Hello all,
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
Thanks in advance for any suggestions,
Best Regards.
CLA, CTD, CLED @ Test & Measurements Solutions Poland
Solved!
Go to Solution.

Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
But the variable GetNumSubProperties ist always 0. Why?
PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
Attachments:
ReadStepResultInLabview.JPG ‏39 KB

Function module that can give the last value or the highest value of a key

hi,
Is there any function module that can give the last value or the highest value of a key feild in a z table.
regards,
johnson

Hi ,
We have aggregate functions in SQL. Some of the functions are as follows.
MAX(col ) Determines the maximum value of the value in the column col in the resulting set or in the current group.
MIN( col ) Determines the minimum value of the content of the column col in the resulting set or in the current group.
AVG( col ) Determines the average value of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
SUM( col ) Determines the sum of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
COUNT( col ) Determines the number of different values in the column col in the resulting set or in the current group.
For further details , type the function name name and press F1 for further help.
Eg: select count(mantr) from mara into workarea where condition.
Reward points if helpful.
Thanks and Regards.

Why javascript can't show right value under struts?

I have a <html:select>,and when change the value of select,alert the current selected value,such pages include following value:
PageID pageName
1      Page 1
2        Page 2
3       �Page 3
<html:select property="pageID" size="1" onchange="javascript:alert(this.options[this.selectedIndex].value)">
<logic:iterate id="b" name="pages" type="com.PageID">
<html:option value="<bean:write name='b' property='pageID'/>"><bean:write name="b" property="pageName"/></html:option>
</logic:iterate>
</html:select>when i change the value of select,it don't show the right value,it should show 1,2 or 3,but it only show
<bean:write name='b' property='pageID'/>
why javascript don't show right value? How to show correct value of select?
Thanks

Working as intended !
Its not your javascript its your JSP is wrong
<html:option value="<bean:write name='b' property='pageID'/>">is bad JSp syntax you cannot nest tags like that.

How to read the default value for a Registry Key

I am trying to use webutil 1.0.2 Client_win_api_environment.read_registry to read the client registry key HKEY_CLASSES_ROOT\.xls, but the function is raising no_data_found. I can read the registry key in Regedit. I am logged on as myself as a non-admin NT user.
P.S: The Client_win_api_environment.read_registry can actually read HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\FORMS90_PATH because FORMS90_PATH is a registry ENTRY, whereas .xls in HKEY_CLASSES_ROOT\.xls is a KEY, but I still need the DEFAULT value of the key and it does NOT seem to work with client_win_api_environment.read_registry
My platform: Windows NT 4, Developer 9i 9.0.2.12.2, Oracle database 9.2.0.4.0, Oracle 9iDS
Webutil.log
===========
192.168.0.99:Lewis: 2003-Dec-17 16:36:44.998 WUL[getProperty()] Getting property WUL_ADD_PARAMETER
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.08 WUL[getProperty()] Value of WUL_ADD_PARAMETER=3
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.08 WUL[setProperty()] Setting property WUL_PARAM_PROPERTIES to B|14|33|50|0|2000
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.28 WUL[getProperty()] Getting property WUL_ADD_PARAMETER
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.28 WUL[getProperty()] Value of WUL_ADD_PARAMETER=4
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.38 WUL[setProperty()] Setting property WUL_PARAM_PROPERTIES to B|14|33|50|0|0
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.48 WUL[getProperty()] Getting property WUL_ADD_PARAMETER
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.48 WUL[getProperty()] Value of WUL_ADD_PARAMETER=5
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.58 WUL[setProperty()] Setting property WUL_INVOKE_SPEC to 1|14|33
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.68 WUL[getProperty()] Getting property WUL_INVOKE
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.68 WUL[getProperty()] Value of WUL_INVOKE=-1
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.78 WUL[setProperty()] Setting property WUL_PARAM_PROPERTIES to F|14|3
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.88 WUL[getProperty()] Getting property WUL_PARAM_VALUE
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.88 WUL[getProperty()] Value of WUL_PARAM_VALUE=
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.98 WUL[setProperty()] Setting property WUL_DESTROY_PARAMLIST to 14
192.168.0.99:Lewis: 2003-Dec-17 16:36:45.98 WUL[VBeanCommon.eraseFromObjectCache()] Removed cache reference to Object 14
Lewis Choo Man
CMIC,
Canada.

Hi Manohar,
You have to give Distribution Key "1" in the Plannner Profile as well as if you take a column for Distribution Key seperately in your Planning Layout for Cost Element Planning, in the Excel file, you can give Distribution Key as "1" in the respective column. When you upload the data through Excel, the system will take the DKey as "1" only.
I hope it will solve your problem. Pls revert back for further assistance..
Srikanth Munnaluri

I downloaded an app on my Mac but it only works on an IPad. Is there anyway to get a refund so I can get the right one?

I downloaded an app on my Mac but it only works on an IPad. Is there anyway to get a refund so I can get the right one?

When downloading apps from a Mac, any apps downloaded in iTunes are for iOS devices.
For Mac Apps use the App Store app.
You can connect iTunes Store Support but I doubt they will give you a refund.
http://www.apple.com/support/itunes/contact/

Formatting Tips, how can obtain the right format?

how can obtain the right format of code,
http://forum.java.sun.com/help.jspa?sec=formatting
if is possible do a example.
Thanks in advantage

Wrap your code between [code] and [/code]
[code]
// Here goes my code
[/code]
looks like
// Here goes my code.

Who I can read the right value of '�' character ? Thanks!

Similar Messages

Maybe you are looking for