Who knows about xdk: xslt vm and xml pipeline processor

hello,
i read anywhere that xslt vm and xml pipeline processor is
part of the xdk.
i would know more about xslt vm and pipeline processor,
but where ??
thank you!!

Hi,
XSLT VM is a high performance XSLT transformation engine in C.
XML Pipeline Processor specifies Java processes to be executed in a declarative manner. W3C recommendation is at http://www.w3.org/TR/2002/NOTE-xml-pipeline-20020228/.
Both of these are supported by Oracle in XDK 10i. More information at http://technet.oracle.com/tech/xml/xdk/content.html. Documentation at http://otn.oracle.com/docs/tech/xml/xdk/doc_library/Beta/index.html.
Thanks.

Similar Messages

  • Hi plz any body knows about difference between po_vendors and ap_vendors_v

    Any body knows about the difference between po_vendors and ap_vendors_v .plz send me the solution regarding this.
    thanks & regards
    Raghavendra
    09962651456
    [email protected]

    Any body knows about the difference between po_vendors and ap_vendors_v .plz send me the solution regarding this.
    thanks & regards
    Raghavendra
    09962651456
    [email protected]

  • Quick question(For people who know about video formats and stuff)

    What type of media file is AVI? Because I looked on the list of codecs compatible with iPod and it didn't say if it was compatible or not, maybe it's something else. If you know, please tell me

    For the formats that were not compatible, I converted them, and it then played the video, but with no sound. I want to get South of Nowhere for a friend on my ipod, butt he only format they come in is AVI and MPG. MPG is quicktime, I know that so it won't work. But what is AVI. Of course I could buy it from the iTunes music store, but I am a kid with no credit card, and my parents wouldn't dare trust me with that

  • For anyone who knows about JVM and MRJ

    I have built an application that runs as expected on Mac OS X. Take the same program and run it on OS 9 (after using MRJAppBuilder) and the errors start. I have included the error below, I never use Vector.toString() so I am wondering if this may be in my JDBC drivers code, or a problem with Apple's MRJ? The code in Question I traced from the EventHandlers actionPerformed method which calls a fetch() method in our Connector class which uses JDBC driver to access the database. I caught a java.lang.NullPointerException with a simple system.out to tell me it was caught and the same error is still thrown on OS 9 so I am wondering if it could be JDBC or MRJ?
    Exception occurred during event dispatching:
    java.lang.NullPointerException
    at java.util.Vector.toString(Vector.java)
    at javax.swing.DefaultListCellRenderer.getListCellRendererComponent(DefaultListCellRenderer.java:82)
    at javax.swing.plaf.basic.BasicListUI.updateLayoutState(BasicListUI.java:782)
    at javax.swing.plaf.basic.BasicListUI.maybeUpdateLayoutState(BasicListUI.java:732)
    at javax.swing.plaf.basic.BasicListUI.getPreferredSize(BasicListUI.java:173)
    at javax.swing.JComponent.getPreferredSize(JComponent.java:772)
    at javax.swing.JList.getPreferredScrollableViewportSize(JList.java:1400)
    at javax.swing.ViewportLayout.preferredLayoutSize(ViewportLayout.java:75)
    at java.awt.Container.preferredSize(Container.java)
    at java.awt.Container.getPreferredSize(Container.java)
    at javax.swing.JComponent.getPreferredSize(JComponent.java:774)
    at javax.swing.ScrollPaneLayout.preferredLayoutSize(ScrollPaneLayout.java:459)
    at java.awt.Container.preferredSize(Container.java)
    at java.awt.Container.getPreferredSize(Container.java)
    at javax.swing.JComponent.getPreferredSize(JComponent.java:774)
    at java.awt.FlowLayout.layoutContainer(FlowLayout.java)
    at java.awt.Container.layout(Container.java)
    at java.awt.Container.doLayout(Container.java)
    at java.awt.Container.validateTree(Container.java)
    at java.awt.Container.validate(Container.java)
    at EventHandler.mouseClicked(EventHandler.java:354)
    at java.awt.Component.processMouseEvent(Component.java)
    at java.awt.Component.processEvent(Component.java)
    at java.awt.Component.dispatchEventImpl(Compiled Code)
    at java.awt.Component.dispatchEvent(Compiled Code)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java)

    I'm also including the Connector's fetch() method just in case, it's the only code with Vectors for return values.
    public Vector fetch( String sqlString ) {
    rows.removeAllElements();
    try {
    Statement stmt = connection.createStatement();
    ResultSet rs = stmt.executeQuery( sqlString );
    ResultSetMetaData rsmd = rs.getMetaData();
    //Set the number of columns, their names and types
    for( int col = 1; col <= rsmd.getColumnCount(); col++ ) {
    columnNames.addElement( rsmd.getColumnLabel( col ) );
    columnTypes.addElement( rsmd.getColumnTypeName( col ) );
    //Set the rows
    while (rs.next()) {
    Vector newRow = new Vector();
    for ( int col = 1; col <= rsmd.getColumnCount(); col++ ) {
    newRow.addElement(rs.getObject(col));
    rows.addElement(newRow);
    rs.close();
    stmt.close();
    catch ( SQLException exception ) {
    while ( exception != null ) {
    System.out.println( "\nSQL Exception: " + exception.getMessage() );
    System.out.println( "\nANSI-92 SQL State: " + exception.getSQLState() );
    System.out.println( "\nVendor Error Code: " + exception.getErrorCode() );
    } //While
    } //catch
    catch( java.lang.NullPointerException npe ) {
    System.out.println( "Vector toString error." );
    return rows;
    } //fetch

  • Everything you wanted to know about books... and then some.

    Hi, all:
    With all the questions and speculation about how books are printed, what color profile to use, etc. I contacted Apple and asked for information that I could pass on. Here's the reply I received from Apple:
    Thank you for contacting the Apple Print Products Customer Service.
    I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
    iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
    While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
    For more information regarding iPhoto 2, please visit the following article:
    iPhoto: Color, Black and White Prints Appear Garbled or Distorted
    For more information regarding iPhoto 5, please visit the following article:
    http://docs.info.apple.com/article.html?artnum=165501
    Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
    BOOKS
    All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
    Hardcovers Books
    The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
    Softcover Books
    The softcover books come in three sizes:
    - Large 8.5 x 11 inches
    - Medium 6 x 8 inches
    - Small 2.6 x 3.5 inches
    All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
    CARDS
    All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
    CALENDARS
    All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
    To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
    KODAK NEXPRESS 2500 Digital Production Color Press
    I hope you find this information helpful in answering questions on the iPhoto forum. If you have any other questions, please reply to this email and we will help you further.
    Hope this will answer some of your questions more clearly.
    Do you Twango?
    G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, QT 7.1.3,   Mac OS X (10.4.8)   22 LCD, 250G/200G/160G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod

    Thanks, Toad. That was very informative. I don't really know anything about McCoy 100# Text Gloss paper stock, but I seem to have a small problem with it (or maybe the gloss/varnish on top, if there is any). I imagine I'm not the only one. My hardcover photo books have always come out beautiful. At home in Southern California, I can leave them on the coffee table without a problem usually. However, if I travel to humid areas of the East Coast with a book, or if it rains for several days here, the book paper will start to develop a wavy, wide corrugation around the edges that is very obvious when the book is viewed in profile. This does not seem to completely go away when the humidity goes back down. Other, "store bought" books around the house don't seem to do this. Have you seem or heard of this before? Thanks.
    --Scott

  • I want to know about Structs in Java and it's use

    Hello friends,
    I am a Software Engineer working in India.Recently I heared about an intersting topic Structs in java(For connectivity in sql structured type).If anyone knows details about it ,plz help me.
    Thejus

    I think that he was talking about C-like structures (Struct), rather than Struts, the framework.
    Anyway, the way to mimic a C-Struct in Java is to make a class with all public members and no methods. There is no equivalent in Java of a Union, however, so if you have to deal with Structs that have Unions within them, you're out of luck. Also, I'm not sure how the sizes will map from a C Struct to a Java class. You'll probably have a mismatch.
    Paul

  • Is there anybody who know about editing multiple tracks, particularly about taking out sections of all tracks?

    When a track has space between video clips, the split clip allows the "delete and close gap" to go past the CTI.  The delete leaves me to move the tracks manually, thereby loosing the alignment I worked so hard to create.

    Bill
    I have reviewed the entire thread several times. The the following is my current understanding based on your most current posts. Please let me know if I have interpreted what you wrote correctly.
    You are doing 3 tracks multi-camera editing using Premiere Elements 12, with each track scene the same but each from a different angle (all 3 in sync for the moment depicted). Based on which track content is on top, you are going along deciding what is to be seen by "removing" the appropriate clip(s). And, as you do that, unwanted clip movement is occurring which is messing up your in sync multi-camera editing alignment.
    I suspect all this started when you decided to use Delete and Close Gap and found that you could not on any video track other than Video Track1. It appears that you found "Cut" was an option. You do not want "Cut" in this instance, you want "Delete", and any clip movements should be made with clips as a group and/or individually with the Ctrl key or Alt key of the computer main keyboard held down as you do that.
    Right now I am not understanding how Snagit got into the workflow. But, the bottom line is, if you have a strategy that works for you, please go with it. I will stay with you in this task until you succeed. As a backup, you may want to keep a copy or copies of the project with the track alignment in tact.
    If I am correct in my understanding of the multi-camera editing aspects of your task, I would ask you to think about (at the right time) using Opacity of clips rather than cuts to decide what is to be shown and not shown. Select a clip, go to Applied Effects Tab/Applied Effects Palette/Opacity Panel expanded. For those clips you want to see 100% Opacity, for those you do not want to see Opacity 0% instead of a cut out.
    As for the matter of Set In and Set Out points, I suspect that the Adobe rep was referring to the following splitting of clips in the Preview Window of the project. But, I do not see that as the way to go for this particular task.
    ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
    If you think a screenshot of your opened tracks would help me focus better into your project, please post one, especially if you think that we are not yet in sync.
    Thanks.
    ATR

  • What should I know about getting my imac and powerbook repaired?

    Hello again,
    Just an update re my 2 computers. My macbook pro that refused to "wake up" or start has returned from apple and diagnosed as a problem with my "logic board" and has been returned repaired in warranty.
    My imac who exhibited the ticking sounds and eventual failure to start is getting the hard drive replaced. I am being charged for 2 hours labour which comes to $300 aud.
    Finally, while this is good news I am left feeling a bit uneasy. Can you advise me if 2 hours is an accurate time frame? And while I never save my passwords are they in there "somewhere?"
    Thanks again for everyone who advised me with the problems I have experienced! And the wireless network is going strong with my notebook and my partner's pc.
    Kind regards,
    Becky Bell
    imac G4 MacBook Pro   Mac OS X (10.4.8)  

    Hello Becky,
    2 hours is a remarkable time to open up an iMac and replace a drive.
    The passwords are stored on the drive. I am sorry to tell you that they have gone with that drive.
    See here...
    I took my Mac apart
    For more on what was done to your Mac.
    Regards
    Ian

  • Who knows how to divide PCI and AGP BUS frequency with MSI KT6V mainboard

    I use 2500+ and can overload to 3200+,but my mainboard of KT6V can not
    divide PCI BUS frequency to 33Hz and AGP to 66Hz.
    who can tell me how to do ?
    Thx!

    Quote
    Originally posted by alpes
    BUT if I set to 400FSB,it read that PCI BUs is 40 and AGP is 80
    I 'm afraid that my hardware can't afford that!
    I think what Wonkanoby is trying to say the reading you are seeing is mis read
    It is auto set to change due to being hardwired into the chip, you just can't see it due to not the correct reading device.

  • Who knows about Jar/Manifest: Class-Path-Attribute

    My question is:
    When packaging my classes and ressource files into a jar file, everything works fine as long as I put the manifest-file into the parent directory of the package folders (there's the main class too) and set its Class-Path-Attribut just as . (a dot).
    I'm working with WinXP Prof.
    As soon as I fill in a path with backslashes or slashes as separator, the produced jar-file doesn't work (class loader does'nt find main-class).
    Is the problem the drive-letter (D:) in the path or do you know something else?
    Greetings
    Frank

    Yes, and likely the . is what you need ...saying: I want the packages which begin in the same directory as the jar running this application. Even if your class is in a package hierarchy like tst.test.Support.class, if the directory tst is in the same directory as the application jar, you would use classpath . not tst/test/Support.class. If you put the tst package in a directory under the folder where the jar resides, say called testit ...you would then have a classpath in the mainifest like testit/. The class path always needs to get you to the root of any package you want to use ...but not into the package itself. Java recognizes when it is looking at a package nesting due to the package declaration syntax in the files, the classpath just points to the location of the root of that package and nothing more. Does this make sense?

  • I need to know about 3g (max download and upload) for any compatible 3G products

    my customers have question to me about your products when used 3G
    such as  the maximum download ? , compatible 3G mobile internet connectivity which one?
    i need real information form you about any product which compatible 3G such as any model of iphone, ipad
    1. model
    2. 3g frequency compatible
    3. maximum download with used 3G (my customer speed test)
    mail to me : [email protected]
    regards,
    yossaprous srithanavut

    Read the technical specifications Apple posts for each model of iPhone and iPad they sell. That will provide you with all the information anyone here can provide about the devices themselves. Actual upload and download performance will depend on the specific cell carrier, the technology they use, the specific cell you happen to be connected to, and a number of other factors.

  • SmartPause: who knows about?

    I've just received this message from Adobe: "We have diagnosed this recording further and found the cause of Choppy audio is because of a new backend feature called SmartPause we added to our server. A recording consists of various streams like audio and video. If while playback of the recording a all the streams are not playing together we automatically pause the streams to wait for lagging streams to catch up. This is SmartPause and was introduced to keep audio/video in sync within a recording." 
    Since I record meeting with a lot of webcam on, with the SmartPause feature (on is the default) the experience viewing the recording is very very bad.
    Adobe assistance suggested me to "Now you will need to wait until the entire part comes ie "https://yucan.adobeconnect.com/_a1145731134/p39dzyxxkeq/?launcher=false&fcsContent=true&pb Mode=normal" & then you append ?smartPause=false"
    This solution works fine but I cannot ask my client to do that for ever. Furthermore I've developed an application that interface Connect via API. If I lunch the link modfied (with smartpause=false), due to a redirect, I loose this possibility.
    Thanks in advance for any suggestion (my clients are out of my door waiting for solutions!!!)

    Hi Mauro,
    As far as I know, SmartPause can be disabled on your account via the license level as you are hosted. Log a ticket with support and ask that SmartPause be disabled on your account.
    Also, if you've got the URL in the format you mentioned below, or the "entire/full" URL like this:
    https://yucan.adobeconnect.com/_a1145731134/p39dzyxxkeq/?launcher=false&fcsContent=true&pb Mode=normal
    Then you should be appending smartpause like this:
    https://yucan.adobeconnect.com/_a1145731134/p39dzyxxkeq/?launcher=false&fcsContent=true&pb Mode=normal&smartpause=false
    This is done because you already have the ? in your string after launcher=false.
    I hope this helps!
    Lauren

  • Please tell me how i know about the factory unlock and Jailbreak unlock iphone4

    I have purchase an iphone 4 from Los Angeles and the saler has confirmed that this is Factory unlock serial number of the iphone is QR1XXXXTA4S VERSION OF THE PHONE IS 4.3.5.
    This is working here at Pakistan with local carier fantastic.
    I would like to know that if I will go for update and this will not factory unlock the iphone will lock during the update what is the procedure to identify Factory unlocked and Jailbreak unlocked iphone4
    Imran
    < Edited By Host >

    It is against the TOS to discuss jailbreaking on the forums. Please remove your post with your email address. It has already been reported.

  • Is anybody out there who knows about titles in Adobe elements

    I have nothing but problems with the titles into Adobe elements Souris anybody out there can help me?

    danielo
    Thanks for the reply. Let us try the Crop way with keyframing described in another way.....
    1. Are you OK with creating the 4 lines of text  in the opened Titler and closing the Titler to have the created title on the Timeline?
    (This is 4 lines created by typing continuously the 4 lines rather than creating 4 separate lines of text.)
    2. After the Titler is closed, you want to apply the Crop effect to the Timeline title (open fx Effects Tab, go to Transform/Crop, and drag the thumbnail for
    Crop into the Timeline title).
    3. Now we are going to edit the Crop effect that was just applied. For that, click on the title on the Timeline to selected/highlighted, and go to
    Applied Effects Tab/Applied Effects Palette/Crop Panel expanded.
    At this point, you should see
    Your next objective is to move the Bottom slider in the Crop Panel expanded to establish what you see on screen across
    the duration of the title. We need to use the technique of keyframing to do that. If we did not and just set the Crop's
    Bottom slider to hide the last three lines, we would just see the first line across the video duration and never see
    the last three line. It would look like
    Are you OK so far with what needs to be done. If so, I will go through keyframing of the Crop effect.
    Keyframing
    Refer back to the first screenshot
    1. Use the -+ slider above the Timeline to expand the Timeline to get a better look at its content (the title).
    Right click the title to which the Crop effect has been applied. Select Show Clip Keyframes/Crop and Bottom.
    Now every time you create a keyframe (to reveal another line) where you have placed the Timeline Indicator, you will see a white dot on the orange band that
    runs through the title clip
    2. In the Crop Panel expanded, focus on the "Bottom" slider. Move that "Bottom" slider to the right, hiding the last 3 lines of text.
    Have the Timeline Indicator at the start of the Timeline.
    Click on the Toggle Animation icon in the Crop Panel expanded area as point out in post 8 screenshot.
    3. Move the Timeline Indicator to the right to an envisioned 25% mark along the clip, move the "Bottom" slider to the left to reveal
    the second line of text. You will see a white dot (keyframe) automatically placed on the Timeline orange band at that 25% point.
    4. Move the Timeline Indicator to the right to an envisioned 50% mark along the clip, move the "Bottom" slider to the left to reveal
    the third line of text. You will see a white dot (keyframe) automatically placed at that Timeline 50% point.
    5. Move the Timeline Indicator to the right to an envisioned 75% mark along the clip, move the "Bottom" slide to the left to reveal
    the fourth line of text. You will see a white dot (keyframe) automatically placed at that Timeline 75% point.
    After you press the Render button above the Timeline, what does that look like when played back in the Edit area monitor?
    These keyframes are adjustable.
    Please review and consider and then let me know if you are OK with this version. If not, please let me know where I need
    to clarify or re-write.
    Thanks.
    ATR

  • Who knows about K7T266 Pro SOUND???

    I want to use my SB LIVE 4 channel surround AUDIO CARD instead of my onboard 2 channel sound, Now MSI Support says you don't have to disable onboard sound if using latest bios like v35 or v36 .. Have any of you Pros done this before?? I could just try it and see, but have a feeling SB drivers might not install properly without doing it right the first time..
    What  do you think? :P

    I guess I should uninstall the AVANCE ONBOARD DRIVERS...
    The way my common sense would dictate is:
    1) uninstall the SOund Drivers
    2) reboot to BIOS and DISABLE ONBOARD SOUND
    3) Shutdown system and install SB LIVE CARD
    4) Boot up and install SB LIVE PCI DRIVERS
    SOUND ABOUT RIGHT????
    Thanks alot and Happy New Year :D

Maybe you are looking for