Whou2019s Who (ESS) u2013 Selection and Output

Hi All,
I am maintaining custom enries in the below node:
Personnel Management>Service-Specific settings>Address Book>Who's who> Who's Who (ESS) - Selection and output
After entering a country grouping, I have u201CUncheckedu201D u2013 Use default settings for (All the 3 fields u2013 Selection Fields, Output Field list and Output fields detail).
I have inserted new lines for the tabs Selection fields, output field list and output fields detail and maintained values. While saving the data the system is not asking for Transport Request.
Please suggest a solution. Though it is a major change it should ask for the transport request either the created one or a new one.
Please help.
Thanks in advance.

Greetings,
you can still transport the Table Views via the Menu "Table View" --> "Transport".
Aside from that, check TA SCC4 and check your customizing Mandt. Check whether the radio button for "automatically record changes" is checked.
regards, Lukas

Similar Messages

Customising Who's Who- ESS?

HI all,
We are using EP 6.0, mysap ERP 2004 and ESS BP 60.2.
In ESS, Who's Who is working fine, but want to remove one link ( Organization Unit). My requirement is either i have to remove the Organization Unit link as a whole or just want to display the data in Organization Unit( not to have further link for that data).
How to achieve this task..
Thanks in advance
Regards,
Mahesh.M.R

Hi Mahesh,
In case you dont want to display organizational unit, carry out following steps:
In IMG go to following link :
Personnel Management -> Employee self-service -> Service specific settings -> Address Book -> Who is who -> Selection and Output------
Remove 'P0001-ORGEH' from "Output Fields list"
This will solve your problem. Hope this helps
Regards,
Ruchi.

Select and move multiple events at once

I´m trying to find a command who let me select and move/drag several events for example 15 min down/later in the day. Maybe I have dreamt it but I think I have used ealier a command where I could use this forgotten command and by pressing down the left mouse click over the events I could select the events at once. I think this is much easier than command + click all the individual events. Next question is, how can I move several event at once. I have tried control + arrow down but that only lets me move one individual event. Not multiple, even if I have marked several. I don´t won´t to copy paste. Since I think this is a slower procedure. I´m pretty sure I have done this the "right" way before but could someone remind me of how it should be done I would be very thankful!

Hi everybody - thanks for using my tip BUT BE AWARE!!!!
The move function in the current iMovie 09 version STILL has a very serious bug.
Whenever you move an event to a different disc, iMovie loses the Favourite/Reject and Keyword information. This can be a real drama when you rely on this information and find out that all this info has gone on the new disc.
There is ANOTHER workaround though (sigh). You Select multiple events (like described in my tip before) and then you do COPY (and not move).
Then you have duplicate events and you can delete the original. But the metadata will be present in the copy. I just found this solution in this thread
http://discussions.apple.com/thread.jspa?messageID=11854650#11854650
thanks harryfear
cheers
gfisch

At-selection screen output and radio button together

Hi all,
I want to make a screen with radio buttons and a drop down menu on selection screen as soon as I check any button and click on Open from drop down menu the output should come according to the button cheked but the problem is that desired output is not coming.
Please see if something could be done.
Thanks,
Shweta

Hi,
Here is the code see y it didnt responds,
I made ZMENU2 in SE41 with Menu bar as OPEN , also activated buttons BACK and EXIT.
tables : sscrfields.
CONSTANTS : buttonselected TYPE c LENGTH 1 VALUE 'X'.
DATA: ok_code LIKE sy-ucomm.
SELECTION-SCREEN BEGIN OF BLOCK frame1 WITH FRAME TITLE text-001.
SELECTION-SCREEN ULINE /1(60).
PARAMETERS: first RADIOBUTTON GROUP rad DEFAULT 'X',
second RADIOBUTTON GROUP rad,
third RADIOBUTTON GROUP rad,
fourth RADIOBUTTON GROUP rad,
fifth RADIOBUTTON GROUP rad.
SELECTION-SCREEN END OF BLOCK frame1.
AT SELECTION-SCREEN OUTPUT.
SET PF-STATUS 'ZMENU2'.
If first = buttonselected and ok_code = 'OPEN'..
         WRITE 'You selected first button'.
    ELSEIF second = buttonselected and ok_code = 'OPEN'..
        WRITE 'You selected second button'.
    ELSEIF third = buttonselected and ok_code = 'OPEN'.
        WRITE 'You selected third button'.
    ELSEIF fourth = buttonselected and ok_code = 'OPEN'.
        WRITE 'You selected fourth button'.
    ELSEIF fifth = buttonselected and ok_code = 'OPEN'.
        WRITE 'You selected fifth button'.
    ELSEIF ok_code ='BACK'.
       LEAVE PROGRAM.
    ELSEIF ok_code ='EXIT'.
      LEAVE PROGRAM.
ENDIF.

At selection-screen output and at selection-screen on

Hi Experts,
I had coded in both at selection-screen output for disabling input of certain fields and at selection-screen for validation like this:
AT SELECTION-SCREEN output.
IF p_amt = 'X'.
    LOOP AT SCREEN.
      CASE screen-name.
        WHEN 'P_AMT'.
          screen-input = '1'.
        WHEN 'P_TST'.
          screen-input = '1'.
        WHEN 'P_B4C'.
          screen-input = '1'.
        WHEN 'P_AFC'.
          screen-input = '1'.
        WHEN 'P_COM'.
          screen-input = '1'.
        WHEN 'P_COM1'.
          screen-input = '1'.
        WHEN 'P_COM2'.
          screen-input = '1'.
        WHEN OTHERS.
          screen-input = '0'.
      ENDCASE.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF p_amt = 'X'.
    LOOP AT SCREEN.
      CASE screen-name.
        WHEN 'P_AMT'.
          screen-input = '1'.
        WHEN 'P_TST'.
          screen-input = '1'.
        WHEN 'P_B4C'.
          screen-input = '1'.
        WHEN 'P_AFC'.
          screen-input = '1'.
        WHEN 'P_COM'.
          screen-input = '1'.
        WHEN 'P_COM1'.
          screen-input = '1'.
        WHEN 'P_COM2'.
          screen-input = '1'.
        WHEN OTHERS.
          screen-input = '0'.
      ENDCASE.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF p_pdf = 'X'.
    LOOP AT SCREEN.
      CASE screen-name.
        WHEN 'P_PDF'.
          screen-input = '1'.
        WHEN 'P_TST'.
          screen-input = '1'.
        WHEN 'P_PATH'.
          screen-input = '1'.
        WHEN OTHERS.
          screen-input = '0'.
      ENDCASE.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF p_afc = 'X'.
    LOOP AT SCREEN.
      CASE screen-name.
        WHEN 'P_TST'.
          screen-input = '1'.
        WHEN 'S_FID-LOW' OR 'S_FID-HIGH'.
          screen-input = '0'.
        WHEN 'S_ORG-LOW' OR 'S_ORG-HIGH'.
          screen-input = '0'.
        WHEN 'S_OFF-LOW' OR 'S_OFF-HIGH'.
          screen-input = '0'.
        WHEN 'S_DAT-LOW' OR 'S_DAT-HIGH'.
          screen-input = '0'.
      ENDCASE.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
AT selection-screen on block b5.
if p_tst is initial.
message text-016 type 'E'.
endif.
AT selection-screen on block b2.
if p_amt ne 'X' and p_pdf ne 'X'.
if s_fid is initial and s_org is initial.
message text-000 type 'E'.
endif.
if s_dat is initial.
message text-000 type 'E'.
endif.
endif.
when i comment out at selection-screen validations the input is disabled for the screen fields as set, else the validations are executed first.
Any solution for this???
Thanks in advance.

AT SELECTION-SCREEN
Syntax
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
Note
The event blocks after AT SELECTION-SCREEN are implemented internally as procedures. Declarative statments in these event blocks create local data.

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/

What is your screen resolution?
What operating system?

Using Selection screen and selection screen output

Hi All,
I am trying to execute AT SELECTION-SCREEN and AT SELECTION-SCREEN output. Both the para's working fine seperately. But when I execute them together AT SELECTION-SCREEN output is not working. Please let me know how to solve this problem. Please see below for the code.
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
             p_lgort LIKE mard-lgort OBLIGATORY,
             p_rlgort LIKE mard-lgort OBLIGATORY.
    PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
        SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
            PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
        SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
    PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
       SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
            PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
                        p_verid type afpo-verid MODIF ID cp1,
                        p_labst type mard-labst MODIF ID cp1.
       SELECTION-SCREEN: END OF BLOCK b2.
   PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
    IF p_boml <> 'X' AND
       screen-group1 = 'CP1'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    IF p_cmpl <> 'X' AND
       screen-group1 = 'CP2'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN.
IF p_boml EQ 'X'.
    IF p_AUFNR EQ space.
        MESSAGE e000(z1) WITH 'Please fill Production Order.'.
    ENDIF.
endif.
IF p_cmpl EQ 'X'.
    IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
        MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
    ENDIF.
endif.
Thanks,
Senthil

Hi Senthil,
As far as my knowledge is concerned AT Selection-Screen output and AT Selection-Screen wont work together.In this code you are trying to do the validation in AT Selection-Screen. Instead of that try doin your validations in Start-of-selection Event.
i,e., modify your code as follows:
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
p_lgort LIKE mard-lgort OBLIGATORY,
p_rlgort LIKE mard-lgort OBLIGATORY.
PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
p_verid type afpo-verid MODIF ID cp1,
p_labst type mard-labst MODIF ID cp1.
SELECTION-SCREEN: END OF BLOCK b2.
PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF p_boml <> 'X' AND
screen-group1 = 'CP1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
IF p_cmpl <> 'X' AND
screen-group1 = 'CP2'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
START-OF-Selection.
Perform validation.
form validation.
IF p_boml EQ 'X'.
IF p_AUFNR EQ space.
MESSAGE e000(z1) WITH 'Please fill Production Order.'.
ENDIF.
endif.
IF p_cmpl EQ 'X'.
IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
ENDIF.
endif.
endform.
Kindly reward if useful.
Thanks,
pavithra

Selection Screen and Output

Hi,
I am developing one report. My customer is requested me he needs Selection-screen and Output of the report both need in the same screen i.e upper part is selection screen below is the Output..
Is it possible?
If YES could you please help me..........?
Thank you advance.......

Hi Kishore,
It is possible create the upper block using selection-screen this will be screen 1.Then create the another block and use INCLUDE to include the upper block.Hope your query resolves.
An example to create selection-screen.
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFROM,
CITYTO LIKE SPFLI-CITYTO.
SELECTION-SCREEN END OF BLOCK SEL1.
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2
WITH FRAME TITLE TIT2.
PARAMETERS: AIRPFR LIKE SPFLI-AIRPFROM,
AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2.
SELECTION-SCREEN END OF SCREEN 500.
We can use loop at screen to make it active or inactive at user command.That is enter or F8 whatever user chooses.
Have a best day ahead.

Selecting separate input and output devices!

hi, i have logic pro 8 and cant find out how to select separate devises for input and output!
for my output (and input when recording drums) i use a alesis multimix 16 (16 track firewire desc) but for recording guitars and bass and poss vocals i would like to use my line 6 x3 live as my input devise but still using the alesis for monitoring.
is this possible? cant figure how to do it.
any help is great help! cheers, Dan

In Logic 9 you can easily select different input and output devices in the Preferences Devices area. In Logic 8 you must create an aggregate device -
http://support.apple.com/kb/HT1215
JG

APIs for accessing the ESS log and output files from UCM

Hi,
As I understand, the output and log files of an ESS job will be uploaded to UCM.
We have a requirement where in we are building a simple error handling framework, which gets triggered after a series of ESS jobs are run. In the error handling framework based on some processing logic we need to e-mail the error or log files to the users. I am not able to find any information related to retrieving the log and output files for and ESS job from UCM. Any inputs on this will be appreciated.
Thanks for your help,
Thiru

For accessing content in UCM you can use the RIDC APIs or UCM Web Services. Note that the UCM also provides features for workflow etc. that could potentially be used for notifications refer to the developer guide for details. For UCM related questions you may want to use this forum instead
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Ok really now...has anyone figured out a new way to select a portion of a project and output just that part?? Or is it still a 20 step process??

Ok really now...has anyone figured out a new way to select a portion of a project and output just that part?? Or is it still a 20 step process?? What is the best/fastest way to give my client a teaser clip??

Still a 20 step process, many ways to approch it. Duplicate project and selectively delete everything around it. Or select and copy what you need. I think it could be a year before apple makes that step a 2 or 3 step process.

Data types used in a sub VI - selecting the correct input and output types?

data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG ‏11 KB

GerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png ‏1043 KB

After installing Mountain Lion. Under sound, where it says select an output device, it say no output devices found and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.

After installing Mountain Lion. No sound. Under sound, where it says select an output device, it says no output devices found, and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.

Try resetting the PRAM and SMC...
PRAM Reset:
http://support.apple.com/kb/HT1379
SMC Reset:
http://support.apple.com/kb/HT3964
Hope this helps!

'Music' displays but won't play. Settings appear correct and iPhone is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

'Music' displays but won't play. Settings appear correct and iPhone (3G) is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

Thank you for the replies.
Appearane of 'Music' functions (I>> > II <<I, plus volume slider) on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged. When using home sharing this same problem persists regardless of what output is selected.
Hope that may prompt a thought somewhere.

Cannot select and move in mountain lion

I am running 10.8.4 on an early 2009 15'' MBP, and I have been having issues where I cannot select an object (file or folder) and move it. This is affecting my other programs, for example, i find that I cannot select and move cursor in Maya.
Not sure why, has anyone seen this before? and can I fix it somehow? I tried restarting my computer multiple times but the problem presists.
thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Whou2019s Who (ESS) u2013 Selection and Output

Similar Messages

Maybe you are looking for