Why ACPI wakeup file does not list according to the modules i use?

I use a linux kernel that is 99% similar to the default archlinux one at version 3.12.5-1. The only difference is that i removed the inclusion of the xhci_hcd module, so that ehci_hcd takes care of everything.
This is lspci output
[root@orion cristobal]# lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
[00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 8 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 0c)
04:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
My keyboard and usb ports are handled by EHCI which is perfectly ok. The problem is ACPI, for some unknown reason to me, it still only wants to work based on XHCI_HCD module
[root@orion cristobal]# cat /proc/acpi/wakeup
Device S-state    Status Sysfs node
RP01    S4 *disabled pci:0000:00:1c.0
PXSX    S4 *disabled
RP03    S4 *disabled pci:0000:00:1c.2
PXSX    S4 *enabled pci:0000:03:00.0
RP05    S4 *disabled pci:0000:00:1c.4
PXSX    S4 *disabled pci:0000:04:00.0
GLAN    S4 *disabled
XHC    S4 *disabled pci:0000:00:14.0
HS01    S0 *disabled
HS02    S0 *disabled
HS05    S0 *disabled
HDEF    S4 *disabled pci:0000:00:1b.0
PEG0    S4 *disabled pci:0000:00:01.0
PEGP    S4 *disabled pci:0000:01:00.0
PEGA    S4 *disabled
PEG1    S4 *disabled
PEG2    S4 *disabled
PWRB    S4 *enabled
In fact, "0000:00:1a.0" and "0000:00:1d.0" are missing which are the highlighted entries of lspci.
How can i make the wakeup list to actually detect the corresponding USB drivers? Or is ACPI somehow configured to work for the default linux kernel of arch?
Last edited by labotsirc (2013-12-23 01:33:36)

Hi jgrubbs760,
Do you get an error message when you try to open the file? Do other files open for you?
Please provide a little more information about what's happening, and we'll try to get this sorted out.
Best,
Sara

Similar Messages

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

Trying to get ESN off of iPad but iTunes on my laptop does not list devices in the left hand column

I am trying to get my ESN off of my iPad but iTunes on my laptop does not list Devices in the left hand column

i am not sure the pad will have an esn. that is a phone based system that is being replaced by the meid number. Can you find that?
Just out of curiosity, what do you need the esn for?

An swf file does not show up in the website even though you can see it in preview and publish

I created a swf file from a mov file in Adobe Encoder. Thge movie shows up in Muse in both the preview and publish mode.
Does not show up in the webstie. The html file is in the assets foder and the swf file is in the image folder and the space is blank.
When i encoded the .mov file I saved it as FLV. Web 1920 x 1080, 16 x 9 5.4 Mbps is the setting for Flash Web Video when i encoded the file.

To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
* Tools > Options > Privacy > History: [X] "Remember download history"

Wsusscn2.cab file does not contain information of the Bulletins released in November.

MS released 16 new bulletins this November on Patch Tuesday.
However all our attempts to acquire any of the new patches failed.
Our initial investigation shows that information for these bulletins has not been added to wsusscn2.cab . we are completely dependent on this file for all the bulletin information and at this moment it appears that this cab file
has not been updated with the latest information. Extraction of the cab file shows that the last updated date if the internal files is 27th/28thOctober.
There is a package.xml file in the cab and that file would normally contain URL’s for the new patches.
I noticed the year and the month url’s only up until the last month. There are no entries for the month of November. Hence the patch acquisition cannot find information related
to the new bulletins

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

The memory for each PDF file does not add up to the Adobe Reader App size

Why does the memory for each individual PDF file (about 250 MB) not add up to the total memory (690 MB) of the Reader app for my iPad 2?

What version of Reader and OS X?

PKCS #11 cfg file does not recognize "()" string in the library path

Hi,
I have a java applet using the provider class - sun.security.pkcs11.SunPKCS11 class to read the Windows Vista PKCS#11 library(DLL). However, the provider class cannot read the DLL file if it is installed into the default 32-bit directory, ie. C:/Program Files (x86)/ directory. If the DLL is installed into another directory without the "()" string (e.g. C:/Program Files/), there is no problem.
It seems that the provider class cannot recongize the DLL with the path containing "()" string. Is there is any work around to solve this problem?
Thanks in advance,
KT Chow

Your xmlschema declares a targetnamespace
targetNamespace="http://fgov.be/rsvz/definitions"
This means that the instance must use the schemaLocation attribute to associate itself with the XML Schema
The format of the schemaLocation attribute is schemaLocation="ns url"
You instance document is incorrecly using the noNamespaceSchemaLocation attribute
Assuming you registered the XML schema using the URL http://test:8081/home/CVB/xsd/B303_Exemption.xsd
this would mean the root tag of the instance should be
<ExemptionRequest xmlns="http://fgov.be/rsvz/definitions" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://fgov.be/rsvz/definitions http://test:8081/home/CVB/xsd/B303_Exemption.xsd">

Why is it that an amplitude-scaled sound does not play louder than the original sound using Play Waveform?

I don't know if I have posted this on a correct location (kinda new here).
I am trying to demonstrate the effect of multiplying a constant to a waveform. I have a sound file read by Sound File Read Simple.vi. Then I am trying to scale the amplitude of the signal by a constant number. I've tried three methods for this: the Numeric Multiplication, the express VI Scaling and Mapping, and the scaling and conversion VI of Signal Express. The waveform shows that the amplitude of the scaled signal is indeed scaled, but when played thru the play waveform VI, the sound level is still the same, no matter how much I am scaling the input. Does anyone why is this so? Also, I really wanted to show that scaling an audio waveform results in a louder waveform. How do I do this? As much as possible, I've wanted to use simple VIs as the class is an introduction to signal processing and the students (and so am I) are still finding our way into LabVIEW (we used to use MATLAB in the course).
Attachments:
scaling.vi ‏69 KB

JaymeW wrote:
Hi kirkbardini,
According to this article about Low Volume From Sound VI, you can use a scalar multiple to increase the volume of a sound saved to a .wav file, so you should be able to do this before playing it. Does that not work for you?
That information is for Labview 7.x and hence outdated. As mentioned before. Labview do a normalization before sending data to the sound card. As you know sound cards are most often 16 or 24 bits. And in most cases data input to a sound card is in DBL type. After normalization the data is converted so the floating point value 1 represent full scale output on data sent to the the sound card DA. To get any further I suggest kirkbardini take the time needed to send us his/hers current code. Then we may solve things from there
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

PDF file does not contain some of the symbols from Math Type save in a Word Document?

I write my math documents in Word using Math Type.
The PDF drops parentheses and some math symbols such as x=bar and p-hat.
anyone else have this problem?

Contact the support of Microsoft or use a forum for MS Word.

Please tell me all the sound specs i need to set up in logic x to have success recording; my output channel does not output most of the time; i use analog lab as well

please help me set up all the sound specs/preferences both hardware and software wise for logic x on mac book pro...i am unable to hear any audio playback when i record a track...no activity in output channel

itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

JAR file does not get uploaded to client for my SERVLET generated APPLET

Some help please...
I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
Thanks...

It works!!
This is what I did:
The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
<APPLET CODE = "marketmap.client.MarketMapApplet"
ARCHIVE = "weblogic.jar"
WIDTH = "657"
HEIGHT = "382"
ALIGN = "BOTTOM"
ALT = "APPLET tag not recognized">
</XMP>
<PARAM NAME = CODE VALUE = "MyApplet" >
<PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
<PARAM NAME = "scriptable" VALUE="false">
<PARAM NAME = ARCHIVE VALUE="weblogic.jar">
</APPLET>
Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
Anyway I figure I'd share. Thanks for the help too.
Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

Load file does not exist

We have several users using OLS V4.2 on one of our citrix servers. However, one of our users can upload an excel sheet into OLS. She always gets the error :
Package Result = Error]
Package:                     Import excel V2
Appset:                      Blagden
Application:                 SALES
Request Time:                2009-04-14 16:56:18
Start   Time:                2009-04-14 16:56:18
End     Time:                2009-04-14 16:56:18
Total   Time:                00:00:00
TOTAL STEPS 8
1. Assign initial parameters:        completed in 0 sec.
2. Create Temp Table:                completed in 0 sec.
3. Transform Data Task1:             completed in 0 sec.
4. update:                           completed in 0 sec.
5. update rejected:                  completed in 0 sec.
6. Transform Data Task2:             completed in 0 sec.
7. Convert data:                     completed in 0 sec.
8. Load and process:                 Failed in 0 sec.
[Selection]
XLFILE= DATAMANAGER\DATAFILES\FL_sales reporting outlooksoft_FL1_FL3_A2009_03.xls
SHEET=TOTAL
TRANSFORMATION= DATAMANGER\TRANSFORMATIONFILES\my Files\import historical data.xls
CLEARDATA= No
RUNLOGIC= Yes
[Messages]
[ The load file does not exist ]
I deleted the user from the userlist and reprocessed security. I added the user again in the admin group and reporcessed user security. Same error.
When the user logs on on citrix using her profile and starts Webexcel using my profile - no problem.
My profile has administrator rights and she may not have them. So I really want her into the usergroup.
We renamed the file to upload to a file with 8 characters - same problem.
Anyone any experience with this error and how to solve it ?
Thanks for your reply.
Johan

Hello,
    From what I understand from your log file, this is a custom import package. It is failing into the last step, loading data into the cube and it seems there is no file to be loaded. If the same package is working well for the other users, this means that the user has not enough security rights to load data from that file (maybe the file contains data for which the user is not authorized to see).
   To understand better what is happening, just try to activate the debug using the DEBUG(ON) instruction into EvModifyPackage. This will create more information regarding the parameters passed to your tasks and you will be able to identify the file name passed to Dump&Load task.
You can verify then into Private publication\user name\Temp files the content of file (and the content of all temporary files generated by your package) and this will help you to understand where is the problem.
Hope this can help you,
Mihaela

File does not exists error

I am using OAS 10g. Looking through HTTP_Server logs, I see the following error repeating very often. I am a Forms developer unfamiliar with Java. Do you have ideas about this error or any suggestions as to what steps I should take:
[Fri Jun 19 17:06:58 2009] [error] [client 123.123.123.123] [ecid: 1245445618:456.456.456.45:4224:4256:265,0] File does not exist: c:/oracle/ora904astest/forms90/java/java/awt/KeyboardFocusManager.class
[Fri Jun 19 17:06:59 2009] [error] [client 123.123.123.123] [ecid: 1245445619:456.456.456.45:4224:5208:169,0] File does not exist: c:/oracle/ora904astest/forms90/java/java/awt/KeyboardFocusManager.class
[Fri Jun 19 17:07:00 2009] [error] [client 123.123.123.123] [ecid: 1245445620:456.456.456.45:4224:5464:243,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/forms/registry/default.dat
[Fri Jun 19 17:07:49 2009] [error] [client 123.123.123.123] [ecid: 1245445669:456.456.456.45:4224:1308:275,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class
[Fri Jun 19 17:07:49 2009] [error] [client 123.123.123.123] [ecid: 1245445669:456.456.456.45:4224:4784:315,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class
[Fri Jun 19 17:07:49 2009] [error] [client 123.123.123.123] [ecid: 1245445669:456.456.456.45:4224:4388:254,0] File does not exist: c:/oracle/ora904astest/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
Thank you.

Refer following note on MetaLink:
ID: 238979.1 How to Prevent "File does not exist" Errors in the error_log?
Thanks
Shail

"File does not exist: /etc/apache2/htdocs/ABC/script" why?

Hey all,
on Linux error.log I go:
"File does not exist: /etc/apache2/htdocs/ABC/script" when I try to use the browser connecting to system. Why?
Any help is fine.
Thanks a lot in advance and best regards
Michael

get it myself
ip adress in wgate config has to be changed to default

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

Why ACPI wakeup file does not list according to the modules i use?

Similar Messages

Maybe you are looking for