Why am I not able to connect to FaceTime suddenly.Tried everything resetting,followed all the standard procedures but why still am not able to connect..
Why suddenly my FaceTime has stopped working.i can connect on my husbands iPad but not on mine.Tried restarting,resetting etched but nothing works.please help.
Why suddenly my FaceTime has stopped working.i can connect on my husbands iPad but not on mine.Tried restarting,resetting etched but nothing works.please help.
Similar Messages
-
I have all the system requirements but it still says it's not compatible.
I need to get OS X Mountain Lion but it says it's not compatible even though I have all the system requirements necessary.
Welcome to Apple Support Communities
It's possible that you meet hardware requirements, but OS X Mountain Lion is only compatible with some computer models. In the case of the MacBook, it requires a Late 2008 Aluminum or Early 2009 one. See > http://www.apple.com/osx/specs
Also, note that Mountain Lion requires 2 GB of memory, so if your Mac model is supported, open > About this Mac, and see if you have 2 GB or more of RAM -
I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.
Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M. -
My iPod doesn't give me any choice to access the camera. I have tried sownloading a camera app and restarting my iPod but when I had the camera app the screen just turned black. Any idea what's going on?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
I have a brand new Core i5 Windows 64bit laptop, but cannot connect to the iTunes Sore. I have tried every solution suggested in the discussion groups but I still cannot connect. This includes completely removing all security and firewalls, and I still cannot connect. I have re-load the software in different combinations again to no avail. Any ideas anyone?
Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?
-
HT4437 I do not have airplay icon I have followed all the steps
I have followed all the airplay advice. I still do not have airplay icon on any of my devices. iPhone 5 iPhone 4S ipad 2 ipad 3 Apple TV. All my devices are software upto date.
Hi Vince,
It helps if you confirm what steps you have taken incase you miss something. Make sure all have same apple id and same network, reboot ATV with all cables out for 30 seconds and reboot the router too.
Jules -
After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.
Settings > General > Reset > Reset Network Settings
-
does anyone know why my ipod nano sixth generation is displayed in windows but not itunes? I followed all the suggestions but nothing.
I apologize if I write bad but I'm ItalianDoublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??
stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.
-
I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help
make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac -
Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!
Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store -
I have iphone 4 and have followed all the steps to update and cannot get past "connect to Itunes"
Hey soozeeC
Use iTunes to update it. Download the latest version and install it. Once it is plugged in, it will ask if you want to update your iPhone to iOS 7. If that does not work then click restore.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....
I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine, -
Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.
Can you send SMS by using the mobile data network instead of Wi-Fi? I had the same problem setting up my 5s from a backup of my 4s. Only after I sent an SMS via mobile data network, somehow iMessage and FaceTime got activated a couple of minutes later without me doing anything else.
I even changed my Apple ID password, because at one point I could not log into my account when iMessage asked for my account details.
If you have difficulty activating FaceTime or iMessage - Apple Support -
I hav tried your way of editing the account information, but my billing is not editing , I want to change my card no. but I am not able to do that,would you please assist me,I hav tried the above described methods
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Defaulting a Cost Center during PR/PO creation for Indirect Materials
Dear Gurus, When creating a PR or PO for indirect materials (No Material Master/Numer), is there a way to default a Cost Center (maybe based on the Material Group) in the PR/PO during creation ? I know that there is a way to default the GL Account Co
-
Hello!! I need make a report with a blob. I have this table: CREATE TABLE DOCUMENTOS ( ID_DOCUMENTO NUMBER NOT NULL, ID_PROY NUMBER NOT NULL, ENCABEZADO VARCHAR2 (100), TEXTO VARCHAR2 (500), PATH BLOB, FECHA_CREACION DATE, TODOS CHAR (1), DGTM CHAR (
-
Interactive Report with additional search filters
Hi all, I want to implement a functionality where I have an interactive report which comes with default Search / Filter option , but I also want to have additional filters which are drop-downs in this case and based on the values selected from the dr
-
Hi, The following program from the Sun books, is supposed to work with different languages. Except it doesn't! It has a problem finding the Properties files (?) It gives the following Exception: Exception in thread "main" java.util.MissingResourceExc
-
Taking glasses out of a photo?
I've been trying to remove glasses from a photo using the clone tool first and then the smudge tool, but am having difficulty. can someone please explain the steps needed to remove eye glasses from a photo? Any help would be appreciated.