Why are some e mails contents all squished together and unreadable

WHen i open some e mails the letters are all squished together making it very hard to read,any help would appreciated

Try some basic troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

  • Why are some of my songs in light grey and have a circle beside them?

    in my itunes a lot of my tunes appear in light grey and have a perforated? circle appearing in the column on the far left side what does that mean

    Are you sure you aren't looking at the tracks in your iPhone/iPod?
    That greyed out and perforated circle thing happens when your iPhone is plugged in, you are looking at the music in it and some songs are physically in your phone (ready to play) and some are in the cloud (you can download to your phone whenever you want).
    I hope this helps

  • HT201974 why are some devices connection to the new extreme and others cannot?

    I just bought a new extreme after reading some great reviews. But I am experiencing something that makes no sense. I have iPads, iPhones, Roku, Directv and others all usinging WiFi and all but one of the ipads (may be defected as I am bringing it in to apple today) and the directv will connect to my network.
    I even tested my already connected devices by "forgetting" the network and restablishing them and they work without fail.
    I bought 3 new iPad Air's and 2 connected no problem. The Roku... no problem. Playstation too.
    The Direct Tv wifi was connected to the old extreme and worked but now it says, "security code not accepted" yet Iit's the correct code. Also 1 of the 3 iPad air's will not connect either. I did a reboot in recovery mode and reinstalled the IOS and still nothing. I reset the network and still nothing.
    Can anyone help? Thanks!

    You should manually set the the IP address and address mask in each device/system on your network.
    WiFi hotspots will randomly change IP address on everything when you use DHCP inside your NAT network, which is the default.
    All of your devices normally use DHCP on your AirPort network to lease an IP address which will expire, and the IP address can change each time a new lease is created. This happens automatically unless you do something to override this feature.
    Network gaming systems and Internet phones often stores the addresses from inside your network at the remote end, which will be wrong after DHCP in your AirPort changes the IP address of all of your equipment at your end. You need to sign out/in from each service or re-install to establish a connection after the address changes. The DHCP lease duration default is 7 days.
    You can prevent that problem by assigning fixed IP addresses to the equipment inside your network.
    You use the AirPort utility to examine the DHCP address range, then select addresses just above the ones DHCP is using. DHCP in AirPort equipment usually uses 10.0.1.1 to 10.0.1.199.
    The addresses you need will probably be 10.0.1.201, 10.0.1.202, 10.0.1.203, ... (use a different address for each different device). The address mask will probably be 255.255.255.0 (this is the same for everything).
    Best of luck.

  • Why are my iPod's contents all greyed out when viewed from iTunes?

    I have a 5th gen iPod nano, with software version 1.0.2
    I have sync'd the iPod with the content I have in iTunes. Now when I try to look at any of the content on the iPod via iTunes (by connecting the docking cable, and clicking on the iPod under "DEVICES"), everything is greyed out. I can't play any of the music or modify any of the information, like volume adjustment or equalizer presets.
    Does anyone know why this happens and how I can fix it? I already tried restoring the iPod and re-syncing everything. It worked for awhile and then the same thing happened.

    Click here and follow the instructions.
    (50450)

  • Why are some of my pages centering themselves (vertically and horizontally) after I select the "Shrink document to avoid overwriting..." option under Add Headers and Footers?

    I'm working in Adobe Acrobat X Pro. I added header and footers through Adobe. I needed to select the "Shrink document to avoid overwriting the document's text and graphics" feature under the "Appearance Options..." option within the "Add Header and Footer" window. Some of the pages in my document that only had a few lines of text on them centered themselves (vertically and horizontally). How can I prevent that from happening?

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Why are some of my calendar appointments synching, some synch multiple times and others not at all?

    why are some of my calendar appointments synching, some synch multiple times and others not at all?

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

  • Why are some of my emails coming in with lines all bunched together on top of each other, unable to read?

    WHy are some of my emails coming in with the text body all bunched together on top of one another unable to read?

    Are that bookmarks that you have imported from another browser?
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Why are some of my movies not syncing while others are? All of my movies are in m4v form, and some of them sync but some of them don't.

    Why are some of my movies not syncing while others are? All of my movies are in m4v form, and some of them sync but some of them don't. Also, when i try to play my movies on my mac AND ipod, some of my movies just randomly freeze and wont let me continue watching. I dont understand why its doing this.

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

  • Why are some (but not all) of my Muse slideshow widget images rotated differently than when I edited them in Photoshop CC?

    I have a few dozen photographs embedded in the slideshow widget. Most of them appear exactly as I edited them in Photoshop, but several appear rotated clockwise 90 or 180 degrees. Does anyone know why this is happening, and ideally, how I can correct this problem? Thank you.

    Please share the site url , also refer to this post and check if this helps :
    Why are some of my images importing upside down?
    Secondly , if you change the fill type then does that makes difference ?
    Thanks,
    Sanjit

  • Why are icons in mail tool bar not in color

    why are icons in mail tool bar not in color and iphoto also

    iVmichael wrote:
    Monochromatic, Orwellian Dullness everywhere, totally hate the look it's a step backwards not forwards. It's absolute b****cks to say this is being 'more inclusive' when it turns so many people OFF!
    Have you done a sampling of all users, or only those users that don't like it? While I don't mind it, I don't think I even noticed it at first until someone pointed it out.
    I note that if you get Info on an item the icon is still colour so this is some OS level (we know best) overaly that's turning everything bland and boring, it would be nice if Apple let the user actually chose this rather than force it upon them ... just like Microsoft I'm sad to say.
    Microsoft? The '90s are over. But regardless of what decade you are living in, Apple has never been too big on end-user customization of the operating system. Apple has always discouraged the use of "themes" whereas Microsoft will allow people to do pretty much whatever they want.
    The file system icons are still the same as they have always been. The new monochrome icons are clearly a design trend more than any change to the underlying operating system. If you turn off the expanded view in any file save dialog (other than in Safari), you can still see the old, glorious, multicoloured icons. If you really wanted to, I'm sure you could change the system-level images and make Finder and Mail look just like they used to.

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Why are some of the file folders on my desktop showing up with a shaded color?

    Why are some of the folders on my desktop showing up with a different folder color, a dark shad of blue, opposed to the default blue color?
    I've searched and searched but all I can find are posts on how to change the color of your folder. I am concerned that maybe, I accidentally shared it or have done something I am not aware of. (Mac Mini, 2.3 i7, 1TB, 16GB RAM running OS X Yosemite 10.10.2)

    I don't know how many photos you're trying to post on one page but if you put too many PCs using Internet Explorer may have problems loading the page.  I prefer to keep the number down to less than 50 and have more than one page which will be indicated by the page links at the top of the thumbnails:
    These smaller pages will load faster and in more browsers.
    OT

  • Why are some of my songs ghosted and some are not?

    Why are some of my songs ghosted and some are not?

    Hi smiilee,
    Have you tried resetting your phone (hold down the Home and Power buttons a the same time and continue to hold until the Silver Apple appears). Once the Home screen comes back up, see if your Music is OK.
    If it is not, then, have you sync'd your phone to an iTunes library on a computer? If so, then hook it up to the computer, uncheck the "Sync Music" option so that no music is sync'd and then sync the phone. This should delete everything on the phone. Then go back and re-check the "Sync Music" option, and select any other criteria you want on that screen, and then sync again. This should put back all of your music.
    Let me know if you have any questions,
    GB

  • Why are some of my songs that i have downloaded into itunes not showing in the cloud?

    why are some of my songs that i have downloaded into itunes not showing

    If you have content eligible for icloud then you can stream it directly. Of course any local content requires your computer on and running iTunes to be able to see your library.

  • Why are some of my songs not in order in my albums?

    I was wondering why are some of my songs not in order in my albums? This wasn't a problem when I first used i-tunes, but I had to download a newer version of i-tunes to get my sister's ipod to work.  For Example my album "AC DC Live" has track #3 Back in Black as the first song listed.  How can this be fixed?

    Hello igho234,
    Thank you for contacting Apple Support Communities. You don't mention how those songs got onto your playlist, but this article may address your issue, if they were imported from a third-party application or CD.
    iOS: Songs or other audio content are skipped during playback
    http://support.apple.com/kb/TS3159
    Regards,
    Jeff D.

Maybe you are looking for

  • How i use my isight to chat in adium with msn users

    I like Know how i use my isight (built-it in a MB) to chat in adium with msn users

  • SAP Document Viewer / ECL

    Hi - How is it possible to email out an attachment displayed in the SAP Document Viewer (TCode SDV)? Are settings within 'Send Object with Note'? If so could you please detail the settings which should be made..... Thanks in advance............

  • Sales order item 1 values are getting deleted

    HI, when i am creating sales order with material variants the dimension values( legth ,width ) for the first item are getting delted. it is happening after the BAPI_SALESORDER_CHANGE executed for  the second item. where could be the problem. is any f

  • Need Help Installing Adobe Reader

    Hello, I am trying to locate my course catolog through my educational institute and it is requiring me to install adobe reader and below is the error mesage. Please advise what to do next. Thank you, Adobe Reader did not install successfully You can

  • Communicate  with access tables "Fingerprint"

    hi all I'm trying to connect the fingerprint with the database. but i don't know how to do that may be I'll use form or communicate directly with the access database . I'm using oracle 10g database forms 6I forms 10g release2 fingerprint export data