Why can I not change the location browser I have moved from Indianapolis IN. to Columbus OH. and when I search it takes me to Indianapolis can I change this?
when doing a internet search it takes me to Indianapolis news, weather, local businesses, ECT. can I change this to reference Columbus Oh. and not Indianapolis ?
This seems to have been asked a lot around the net, however, there doesn't seem to be an adequate answer to it.
I am running:
Operating system is Windows 7Motherboard is Q67H2-AM v1.1
Bios is ACER ver. 2.10.1207
GPU is GTX 770
PSU is 700w
The Graphics card is plugged in to the 16x slot, the fans spin, but no display and no device is recognized in device manager.
I have tried a few solutions including uninstalling my onboard graphics driver from the device manager and going to upgrade my 600w power supply to a 700w one.
I think the issue is that I need to change the BIOS to PEG or PCI Express. However, in the Bios the settings for both "Primary Video" and "Onboard Graphics" are grayed out, meaning that I can't change them.
Similar Messages
-
See question above
Do you have Facebook contacts turned on? It may be at some time you got an email message from them and that is the way they have their return address set. All previously used addresses are in a cache on the phone and the only way to clear that is to restore the phone as a new device, which deletes all data from the phone. You cannot restore from a backup because the information is in that and will just be put back on the phone.
-
What the heck is a "pass code" and why am I being asked for one?? And where would I find said pass code? I've not had to do that for prior updates, so am more than a bit confuzzed. Thanks.
The Passcode is the 4 digit code you use to unlock your iPad.
-
I can not open the Safari browser in the operating system ( os x Mavericks ) ?
due to load a program of site>!!!!
please help me .
thank youTry this.
Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down. -
Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?
Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG 69 KB -
Why can't I open iTunes or apps on ipad1? And why do apple not support the latest update for ipad1 when it's less than 2 years old. I am sick of huge corporations ripping off joe public!
And the processor limitations.
iPad: RAM - 256MB, Processor - 1 GHz Apple A4
iPad 2: RAM - 512MB, Processor - 1GHz dual-core Apple A5
iPad 3: RAM 1024MB, Processor - 1GHz dual-core Apple A5X
Similarily, the iPad 2 did not get Siri and some other features in iOS 6.
Cheers, Tom -
With my Mac Book,can I Enter in my own ICal repetitions. Like all 3,4,5,6,7,8,9,10,11,12 weeks. Why is that not in the IPad?? Kind regards Sylvia
We're just users like yourself, so we can't answer your question. It's just how Apple designed the calendar on iPad. There are calendar apps with more flexibility in the App Store. You might want to explore those options.
-
why I can not give the application?
I have money in the account at the expense of Gift cards ($19.80), and I am forced to fill payment informationWe are not Apple employees here. Everyone here is just a fellow user. You can comment to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/itunesapp.html
but Apple does state in a number of places that you cannot use a gift card to buy other gifts, including the purchase page in the Apple Store.
Regards. -
Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.
There have been many issues reported with Kodak cameras - serach the forums for them
Actually the best practise is to use a card reader to import your photos, verify that they are imported ocrrectly and wait at least one backup cycle and then use the camera's format command to reformat the card and erase it - this assures no lost photos and always having the card properly formatted
LN -
can someone please tell me why I do not get the delete from disk option when trying to delete duplicate items
The content must be in the iTunes directory structure for that option to appear.
-
why is itunes not able to pick up certain photo folders from Iphoto. i'm tryin got sync certain iphoto album into my iphone 5 but itunes is only able to read certain photo albums. not sure why because photos were taken using the same camera 1 day apart.
pls advise.
Thank youi did but its still only picking up some of the photos. For eg, 1 folder had 147 pics but iTunes is only picking up 17. Can't seem to understand why. They were all taken on the same day using the same camera with the same settings.
-
iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???
There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers. -
output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;) -
Gorgeous Hello All,
If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
A hurdle :-
When I File -> View -> Primary Layout : I am getting only these options of Search, Hide, Contents, Index, Glossary, Print being displayed on the screen, eventhough I have ticked for Hide/Show, Refresh, Back, Home (Home -> Advanced Properties -> Home : and declared the respective url as well) , Options courtesy View -> Pods -> Project Set-up -> Double Click on Windows -> Double Click on NewWindow.
Why am I not getting the buttons of Hide/Show, Refresh, Back, Home, Options when I File -> View -> Primary Layout ?
Cheese - Vipin NambiarHey Piyush Buddy, where were you since my morning !!! :-) :-) :-) Your simple question here made me realize where did I make the slip of my brain and now all the desired buttons are appearing on my screen.
I just made simple parameter changes called View -> Pods -> Single Source Layouts -> Right Click On Microsoft HTML Help -> Setted as Primary Layout (earlier my Primary Layout was setted up for Multiscreen HTML 5).
THANKS GALORE Piyush buddy - Your simple question to me made a mammoth and galores of help to get my train on track. -
BOE 3.0 Designer does not show the table browser
Hi,
I am using BOE 3.0. I was able to view the table browser a few days back. After I changed the license key, the designer stopped showing me the table browser. I am logging into Designer with Administrator previleges. Although the Administrator has "Full control", but when I click on "Insert->Tables" in designer it does not do anything, not even display the table browser. I have created Oracle client connection and tested it. The server is responding, but the insert-> tables does not work.
Any help would be appreciated.
Thanks,
SUS.1. When you invoke table browser using Insert->Tables do you see progress bar below the designer (task Bar)
Sus: Yes I can see the progress bar. It exists for a few seconds and then disapperas,but does not do anything.
2. Can you try invoking Table browser by double clicking on Universe designer pane.
Sus: Yes I tried, but nothing happened. I mean I could not see the table browser
3. Can you check if Designer can connect to your DB.
Sus: Yes the designer is able to connect to the DB. I tested the connection and got the message "Server is responding". In fact when I am using the quick design wizard I can able to see the tables from my DB.
4. How many tables do you have in DB, IF there are lot many table then it might table time to load those tables
Sus: Currently my DB contains almost 40(20 tables and 20 views). I don't think it is concern. I worked with DB which contains more than this and that time I did not face this issue.
5. Can you strategies tab in parameters (File->Parameters). What is the strategy for Tables. Try using built-in strategy.
Sus: Yes it is built-in for tables. It is the default one and I did not change it.
Is there a limit set to insert tables in designer?
-Sus
Maybe you are looking for
-
MACBOOK Pro 13-inch Mid 2012 2.9GHz Intel Core i7 8GB 1600 MHz DDR3 Intel HD Graphics 40000 512 MB Mac OS X Lion 10..5 (11G63) Model Identifier: MacBookPro9,2 Boot ROM Version: MBP91.00D3.B08 SMC Version (system):
-
IMovie Can't Find Movie File Location
I had to reinstall the OS and all software on my MacBook Pro and after I imported the Movie files back into iPhoto, iMovie can no longer find the movie files for the projects. When I open an iMovie project, there is a yellow triangle with an exclamat
-
FD33 - SALES VALUE - Field name SAUFT
Hi, SAP defines the sales value (FIELD: SAUFT) as "the total of all order values which have not been transfered to FI, but which are taken into consideration when checking the credit limit." I have a situation here, whereby a customers credit Limit h
-
How to install Jetspeed2.0 with the help of installer
Dear All, i am having Jetspeed2.0-MultiDb-install.jar file for Jetspeed2.0 install i tried to run it with the following command and get the exception everytime i am attaching the details of the errors along with the problem can anyone please let me k
-
Hi, there, My problem is as follows: I have a PCI DAQ card. I need to read two set of sychornized values. One set is a periodic waveform data (wave 1, say triangular waveform) the other set (wave2) is actually the signal in response to the triangular