Why can't I connect to my wireless network?

Why can't I connect to my wireless network? My phone is set to it but I can't connect with my ipod touch. Do I need to reset my wireless?

- Reset the iPOd. Nothing will be lost
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Similar Messages

Since downloading iSO 5 i can no longer connect to a wireless network.

since downloading iSO 5 i can no longer connect to a wireless network. I have tried both at home and at other wireless hotspots. it would appear that none of the previous wireless connections work either? i just get the error "unable to connect to "x"
i have tried to "forget" and rejoin but that has not worked either.
what to do pleeeease?

Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
Did you try to reset the network settings on your device?

Is there a way to configure win 8 Laptop to airport express? I can see theN connection to the wireless network, but troubleshooter suggests there's t

Is there a way to configure win 8 Laptop to airport express? I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
shows limited. Any help you could provide would be most appreciated. Further, should I simply buy another router for the windows machine? If I did that, would it interfere with the airport?

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Can no longer connect to my wireless network started today

every time i try to connect to my network it says connection timed out. i can connect using cable... and my windows laptop is connecting to the network wirelessly. Any sugestions

Be careful…
There are two pieces to connecting to a wireless router, getting connected to the network itself and getting an IP address.
If the AirPort icon shows you as connected that means you are connected to the network (and any passwords required have been accepted); the self-assigned address means you haven't been able to get an IP address from the DHCP server on your network.
If that's the case, the next question is why, and to figure that out you need to know who normally assigns IP addresses on your network - a cable or DSL modem, some other machine, a wired router or your wireless router - and try and debug things from that end.
I've mentioned before cable modems as an example; they typically only assign one to three IP addresses and often need to be power cycled before they will assign any more. This is cable companies' way of having multiple hosts slam the modem with data; if you have to have another router in the path the router to modem link becomes the bottleneck, not the modem itself.
So the next question is who is responsible for assigning IP addresses (via DHCP) on your network?

Lion - can no longer connect to WD wireless network / hard drive.

I upgraded to Lion and now I am unable to connect to my WD wireless network hard drive. it tells me that the version of the server I am trying to connect to is not supported and to contact your system administrator to resolve the problem. Suggestions?

See #C16 in Time Machine - Troubleshooting.

Why can't I connect to my wireless speaker with my iPad 2

I have a Sony wireless speaker that connects with my iPhone but won't connect with my iPad 2. Any ideas?

- Reset the iPOd. Nothing will be lost
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

HP C510A eStation Printer - Zeen: Not Connected - Can No Longer Connect To My Wireless Network

Up until a couple of weeks ago, my C510A was working well. Every so often the wireless sync would fail and I would have to resync the Zeen tablet, or unplug/replug back in the printer to regain sync, but now... Nothing!
My Firmware is: ZEP1CN1130AR
Printer IP: 192.168.1.74
Zeen IP: Not Connected
SSID: Visible
Mac Filtering: None
Security: WPA/WPA2 PSK
Signal Strength 3-4 Bars (I can move closer to the router and watch the bars increase, and move further away and see them decrease. So the wireless radio is on and functioning within the Zeen!)
The Zeen cannot connect to my network and is never given an IP address, so I can't set the printer up with a static IP address. It just keeps trying to sync with my network and failing. Over, and over, and over, and over again... I have reset the Zeen to factory using the Power On/Volume Up combo. I have uninstalled my HP printing software suite, redownloaded the latest version of the entire suite from the HP Support site, and have installed the drivers/printer both wirelessly and via a USB connection. I have powered down my wireless access point and powered it back up to see if that helps, but nothing does.
uVerse Cisco 2Wire i3812V Gateway/Router
Netgear WNDR3700-V1 configured as a wireless access point (Thanks to the crappy 2Wire POS above.)
I have numerous laptops (Mac and Windows), a Mac Mini, 3 tablets (WebOS, IOS, and Android), IOS and Win8 mobile phones, a Roku 2 XS, various TV's and Blu-Ray players, a Wii, and this malfunctioning HP printer connected to my network via 802.11 DB wireless AND a wired gigabit network. I run a Plex Media Server on the Mac Mini which is my HTPC for our home. The printer was working fine in this setup until a couple of weeks ago.
From reading the many Zeen threads here, and on other forums, it's obvious that there is some sort of ongoing connectivity issue with the Zeen tablet on this printer. HP has been conspicuously silent on the issue, and there is precious little to go on in the HP Knowledgebase, or in replies on this forum. I've suffered through being hung up on, as well as trying to explain my problem to tech support reps who both do not speak English very well at all, and are unable to grasp concepts and analogies in English.
My frustration level is HIGH at this point. My printer is out of warranty, and if there is a hardware issue with the printer then I fully expect to have to make the decision as to whether it's worth repairing or not, but I do FULLY expect to be able to talk to someone in technical support who speaks English about the issue and try to diagnose and fix the problem if it's just a software/networking/configuration issue at NO CHARGE, just like I do with every other product that I own!
So I'm coming here to try and find an answer to my problem before I reach the point, and it's very close right now, of totally severing ties with HP, Compaq, and all the rest of their subsidiaries both here at home, and at the company I manage (where I pretty much make all of the hardware decisions). This just isn't the way to treat your customers.
Any help and suggestions are greatly appreciated.

Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP.

Why do I lose connection to my wireless network ATT Uverse but my iPod and iPad do not?

I am connecting to the internet through ATT U-verse and have had a problem with my Macbook Pro not being connected when other Apple devices are connected. Did not have this problem before, but it is iratating as it forces me to restart the ATT modem each time it happens. Is it possible that Lion is causing the problem. MacBook is about one year old.

AirPort and Bluetooth: Potential sources of interference

Why can't I connect to my wifi network after ios 6 update?

I have updated to ios 6 and now when I try to connect to wifi, it sends me to a "oops the page you have requested is not available" page at apple.com. What is going on????

It didn't work for me either.
My Apple store don't know the answer and have suggested that I connect to a computer and do a full reset and install iOS6 again.
Not too sure how to do that yet.

Why can't I use two 8500 wireless printers on one router? The 8500 A910 looses it's connection.

Why can't I use two 8500 wireless printers on one router? The 8500 A910 looses it's connection after awhile.

What router? What operating system? Are they both A910s?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?

All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

Why can't i connect my ipad to home wireless?

why can't i connect my ipad to home wireless?

Is your iPad seeing the Router SSID (Network Name) in the list of networks? If so what happens when you try to select it? Are you asked for a password? If the network isn't secure then it won't ask you for a password and you should just connect.
Regards,
Steve

Why can i not connect my wii to mywireless network when the hp printer wireless is enabled?

If I get my HP deskjet wireless enabled and working, my Wii can no longer connect to my wireless router. However, if I disable the wireless on the printer, then my Wii will connect to my network again. What gives?????

Hello,
Try setting a static IP address on the printer: https://h30495.www3.hp.com/p/_wireless/faq.html#01
Let me know if this works.
Thank you.

Why can't I access my music on my ITouch? It wants me to connect to a wireless network in order to listen to my music

For the last few days, when I want to listen to music on my Itouch, it is asking to connect to a wireless network?

Welcome to the Apple Community.
Any tunes that are not on your iPod will need to be downloaded from iTunes match, you will need a wifi connection for that.

Why can't I connect to internet on my ipad since updating to 8.3 even thought I am in sync with itunes?

Why can't I connect to the internet on my ipad 2 since I updated to 8.3? ITunes indicated ipad is in sync and my wfi is working.

On your iPad, go into Settings --> Wifi. Does your iPad indicate your device is on a wireless network?
If so, can you verify your wireless network is correctly functioning?
If not, connect your device to a wireless network. If the iPad refuses to connect to a wireless network. Go into Settings --> General --> Reset --> Reset All Network Settings. If done correctly than you will NOT loose any data while reseting your network settings. After the reset, go back into wifi settings and attempt to connect to a wireless network.

Why can't I connect to my wireless network?

Similar Messages

Maybe you are looking for