Why can't I run in non-debug mode???

I recently copied a JSC project into another project using the "Save Project As" option when right clicking on the project name.
The new project appeared to copy fine and I was able to bild and run the project normally.
Somewhere along the line, I did something that changed something to where I can no longer run the project in 'non-debug' mode by using either the 'Run Main Project Ctrl+F5' under the 'Run' menu or by clicking the Right Green 'Run" triangle on the main menu.
The project builds successfully, but never runs in the browser.
I have tried stopping the server and everything else I can think of, but nothing works.
I can select 'Debug Main Project F5' from the 'Run' menu and it will build and start in the browser.
Other projects, including the source for this one, run fine in 'nion-debug' mode, but not this one.
How can I fix this??
I have run into instances where I get a message that says the build.xml file was altered externallt and was rebuilt. Is there any way to force a remake of the build.xml file using "Standard" defaults?
Thanks

The reason for copying the project was in order to create another very similar product that required only minor modifications at this time.
I got around the problem by doing another project copy and then using Beyond Compare to update the new copy with modifications I made to the original copy.
That worked.
My basic question was what would cause the problem that would create the situation where you could run in debug mode, but not non-debug mode.
This happened after the original copy (that worked fine) and after I had done most of the required modifications.
My thought was that there was some file or parameter that I could change rather than redoing the process.
Apparently not......................

Similar Messages

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Why can't I text with non Apple equipment?

Why can't I text with non Apple equipment?

You can with third party apps. You just can't use Messages in order to text since it only works with other iOS devices and Macs running Mountain Lion.
https://www.google.com/search?q=texting%20apps%20for%20iPad

Why can't i run itunes on my windows 8?, why can't i run itunes on my windows 8?

why can't i run itunes on my windows 8 laptop..?

Hi sincerelystef,
If you are having issues installing iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

As of late i have been unable to run fwd email u tube videos my mac tells me i need adobe flash got it still neg = and now my bakn statement is in pdf and mac tells me i need adobe reader got still neg why can't i run these things on safari?

As of late I am unable to run forwarded videos ie utube ect on safari- my MAC tells me I need adobe flash- got it still neg - now my bank statement is in PDF format and my MACtells me I need adobe reader - got it still neg WHY CAN'T I RUN THESE THINGS ON SAFARI???

Hi...
For videos. Uninstall the current Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Quit then relaunch Safari. From the Safari menu bar click Safari > Empty Cache
Try a video.
All online bank statments are in PDF format.
Go to /Library/Internet Plug-Ins
Move the Adobe PDF Browser plugin (or just PDF Browser plugin) to the Trash.
Now try a bank statement.

Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???

Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???

If you haven't, try updating through iTunes while connected to your syncing PC.

Why can't I run my Java program with just the JRE, the JDK is required?

I've recently written 3 programs in Java using the Netbeans IDE with JDK 1.6 as the default Java platform. The compile-time libraries include the Swing Application Framework. I use BuildDesk from ProductiveMe to package the each program into a Windows installer.
When I install the programs on a new computer without a JRE or JDK being present, and attempt to run them I get an error (as expected) stating that there is no JVM. The messages says that I need to install JDK 1.3 or higher. I downloaded the latest JRE onto the new computer and attempted to run the programs and I get the same error message. My question is, why can't I run these programs with just the JRE installed? Why do I need the JDK? When I install the JDK, the programs run fine. The typical user may not have the JDK on their system, but they likely have the JRE if they've run Java programs before.
Is the answer as simple as there must be library functions being used by the programs that belong to the JDK, but not the JRE? I'd rather a user not have to install the JDK verses the JRE because they may also have to update some Windows environment variables.
Thank you for any help on this issue.

915088 wrote:
Thanks for your replies. I further investigated BuildDesk and found an option which allows a JVM check but that check needs the JDK. I stopped the JVM check and rebuilt using BuildDesk and it now only requires the JRE to run the programs. The reason why I use BuildDesk is to package more than just the jar file for the user. BuildDesk allows me to create a installation folder structure as well as include any other files in the build. I could just as well zipped all this together for the user but decided against that method.I don't think anyone will question your usage of an installer tool; that is entirely up to you. But what is questionable is that you have problems with that installer tool and then go look for help in a Java programming forum. The next time, go look for help at the source. If there is no way to acquire help (support, a forum, a mailinglist, anything) then that is a very good reason to not use the product in question.

Why can't I run quicktime videos on ipad2?

why can't I run quicktime videos on ipad2?

Eric-
QuickTime is capable of playing more video formats than the iPad. The iPad can play M4V, MP4 and some MOV format videos. It can not play formats like WMV and FLV.
One thing you can do is to convert the video formats on your computer.
A free program that can do it is HandBrake, which is available for both PC and Macintosh at <Download>.
Fred

Why can't I run powerpc applications?

why can't i run powerpc applications?

Thank you Thomas!
fishellnb wrote:
do you know of any workarounds... ?
Installing Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on images to enlarge]
And on Mountain Lion:
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Why? Why can't I run iMovie and have it

Why? Why can't I run iMovie and have it ask me whether I want to load an existing project or new one? I don't see a setting for this in Preferences.
thanks

I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

Project runs Ok in debug mode but not in release mode

I have an application developed with VC++ 6.0 and measurement studio. The application controls SCXI-1161/1166 relay boards to connect the UUT. The application runs ok in debug mode, but in release mode the application can't drive the relay boards. I have tried to change optimizations mode, it didn't work. Who can tell me how to solve the problem? Thanks!

It sounds like you have an older version of our SWITCH driver which relies on our DAQ driver. I would recommend uninstalling the Traditional DAQ, DAQmx, and SWITCH drivers and then installing the newest version. At this point you have 2 options:
1) You can download Traditional DAQ 7.4, DAQmx 7.4, and NI-SWITCH 2.4 drivers bundled together here: ftp://ftp.ni.com/support/daq/pc/ni-daq/7.4/
2) You can install the latest version: NI-DAQmx 7.5 here: http://digital.ni.com/softlib.nsf/websearch/CF7ECCEA4C4CC7DE86257038004D88AE?opendocument&node=13206... This has support for all of our USB DAQ devices (if you're not using them then you may not want to worry about installing this now) and then install Traditional DAQ 7.4 here: http://digital.ni.com/softlib.nsf/websearch/C36A54ADDA3DC33D86257038004E55E6?opendocument&node=13206... and NI-SWITCH 2.4 here: http://digital.ni.com/softlib.nsf/websearch/9D6B8C7FD41BF3D08625702E0072E294?opendocument&node=13206...
This should solve your problem.

Eroor in eclipse when i have run TOMCAT in debuge mode web service debuging

hello all,
i have a serious problem with debug my web service. I set local variable in eclipse (-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000). And now if i run TOMCAT in normal mode all worked fine and i run remote java application fine, but if i run TOMCAT in debug mode, eclipse in console return error:
"Error occurred during initialization of VM
agent library failed to init: jdwp
ERROR: Cannot load this JVM TI agent twice, check your java command line for duplicate jdwp options."
If anyone have this problem please tell me how to resolved it.
Thank for help.

Eclipse is kind of a competing product so this is not the best place to ask the question. With that most will be nice enough to lend a hand. I suggest ensuring that all other instances of tomcat are stopped then try again. In the Debug perspective ensure there are no servers running with the same name as the one you are attempting to use. If all else fails ensure there are no tomcat process running if they are kill them. Finally, if you cant get it to work reboot. If still no good the Eclipse might be a better place to go.

Program running fine in Debug mode but failing in direct execution

Hi All,
I am facing a peculiar problem, I have created a report that create STO then Delivery and then Shipment one after one. I have used BAPI to do so. If STO creation is successful then Create Delivery and if delivery creation is also successfull then create Shipment.
When I run this program by pressing execute button it is only creating STO and coming out ,but if I run it in Debug mode I get all the three( STO, Delivey,Shipment). Since it run fine in debug so I can't found where the problem is.
Can any one help???
Regards
Hemant

Hi guys,
A learning for me .... how important WAIt parmeter is in commit work .. Initially i have not set WAIT paramater in commit BAPI to X due to this further processing.. Delivery and Shipment creation was failing in direct execution ... as after STO creation I was reding EKPO and that was failing in direct execution , but in backgroung everything was ok.
Thanks for your time.
Cheers
Hemant

ASMCMD-08103: failed to connect to ASM; ASMCMD running in non-connected mod

Hi,
I am facing below problem.
ASMCMD-08103: failed to connect to ASM; ASMCMD running in non-connected mode
ASMCMD-08102: no connection to ASM; command requires ASM to run
Probable reasons are:
1. ORACLE_SID is not set properly
2. ASM instance is not running.
But my ORACLE_SID is set properly and ASM instance is also running...
What else i can check?
Thanks,

======================================================
[oracle@aveo:~]>lsnrctl services
LSNRCTL for HPUX: Version 11.1.0.6.0 - Production on 18-AUG-2010 12:08:05
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "MIG11A2" has 1 instance(s).
Instance "MIG11A2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "MIG11A2_XPT" has 1 instance(s).
Instance "MIG11A2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "Q111REG" has 1 instance(s).
Instance "Q111REG", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "Q111REG_XPT" has 1 instance(s).
Instance "Q111REG", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "QA111REG" has 1 instance(s).
Instance "QA111REG", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "QA111REG_XPT" has 1 instance(s).
Instance "QA111REG", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
======================================================

How to run labview in debug mode

Two questions:
1. how to run labview in debug mode
2. how to save default text values in labview

Hi,
consider i have streaming bits of data as input who length varies each time. I need to select 11 bits at a time and apply (15,11) hamming coding for the inputs till the input is stopped.
I have designed the hamming encoding and decoding block. I need a methodology to select 11 bits at a time from the input and provide to the hamming encoder.
eg: if input is 1100 bits, output must be 1500 bits.
I have uploaded the encoder and the decoder part. Please suggest me the design to read the input and append the output.
Attachments:
project_HammingEncode.vi ‏19 KB
project_HammingDecode.vi ‏22 KB

Why can't I run in non-debug mode???

Similar Messages

Maybe you are looking for