Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?

I tried to customize the Envy 15t but I can't proceed on upgrading the following.
Error
24GB SSD Acceleration Cache requires purchase only up to 8GB System Memory. 
Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?
Can HP explain this to me? or any one? please

Hi,
The 24Gb cache drive will store manything and normally it will need at least twice the size (capacity) of RAM. Double 16Gb is 32Gb therefore 24Gb is not big enough.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How can you tell that you have the 24GB flash Hard Drive Acceleration Cache

    I bought laptop with 24GB flash Hard Drive Acceleration Cache but i don't see a ssd drive when i go to my computer.
    This question was solved.
    View Solution.

    Yes it does not mount as a lettered drive. It is combined with the main drive in a RAID array. Look in the list of programs and find Intel Rapid Storage Technology and open it up. If you have the 24 gig cache drive it will look something like this:
    See the two drives listed in the upper right corner?
    If this is "the Answer" please click "Accept as Solution" to help others find it.

  • Why can't I use the Width tool on lines I drew with the Paintbrush tool?

    I have drawn a shape using the Paintbrush tool's new smooth fidelity with a 3 pt stroke.  But when I go to use the Varible Width tool it want allow me to modify the line.  what am I doing wrong?  Is this even possible?

    Thanks.  That seems unfortunate.
    Bruce Burton
    Kiku Obata & Company
    6161 Delmar Blvd., Suite 200, St. Louis, MO 63112
    Direct 314.505.8427  Fax 314.361.4716
    www.kikuobata.com

  • The system requirements for Mavericks used years of production for the computer requirements.  Why can't they use the generational number system?

    Office location where Mac Pro is located has a slow internet connection.  I downloaded Mavericks installer onto thumbdrive.  Attempted to install on a dual 3 core Xenon Mac Pro, model 2,1.  After a few hours, I figured out that the error message that was generated by the installer was telling me that my computer doesn't support Mavericks.  Do other people get confused with which generation of hardware is supported with software?  I understand the difference between PowerPC and Intel.  The tricky part is the difference between 32bit and 64bit with the EFI and the CPU instruction set.  Also, why can't they stick with a clear numbering system that is visible when you get info on the Mac? 

    If you are desperate you can use hackintosh tools to boot in 'legacy' mode which allows 10.9 to run on unsupported Macs. Chameleon bootloader & some google fu will get it running in an unsupported way (assuming your graphics card is supported).
    I think Apple dug this hole when they told everyone that these were '64bit Macs'. Sadly if they don't support 32bit EFI in their new OS it's not going to work by default. In other discussions I have read that drivers need to be rewritten for actual 64bit support on a 32bit EFI.
    I have run 10.8 on my 1,1 MP, but 10.6 was nicer, at some point I'll try 10.9 on it
    P.S. http://mactracker.ca and http://www.everymac.com are handy for working out what model supports what features etc.

  • Hi, why can't I use the iMessage on my iPhone? I've already had my apple id email on it but it keeps saying "waiting for activation" always like that. No progress. Could anybody help me on this? Cheers

    Hi, why can't I use the iMessage on my iPhone? I've already had my apple id email on it but it keeps saying "waiting for activation" always like that. No progress. Could anybody help me on this? Cheers

    I have an old iPod Touch with old software that can no longer be updated:
    iOS version 6.1.6
    I've been searching for a solution to my iMessage login problem for months and tried everything from those frustrating links and all the tips from other users.
    Here is what finally worked:
    1) Settings > Privacy > Location Services > On
    2) Settings > General > Date & Time > Set Automatically > On
    3) Reboot device until Apple logo appears
    4) Settings > Messages > Sign In

  • Why can't i use the radio on my nano 7g with bluetooth

    why can't i use the radio on my nano 7g with bluetooth. i wanted to use wireless feature at work but i only use the radio at work , so i bought bluetooth stereo headphones by plantronics, got the backbeat 903, at wal-mart  . got home got it all set up and works fine but not for radio , i'm so dissaponted and am thinking i might take them back and continue using the wire ware , but then again i like listening to my podcast while doing dishes and chores at home so the bluetooth would be better for that .

    i have sent a feedback form to apple about this problem . i hope that they work on a sulotion for it .

  • Why can't I use the update center in 9i Jdeveloper any more?

    why can't I use the update center of 9i jdeveloper with my otn username and password anymore?
    Is there any problem?

    Hi,
    We're aware of this issue and are looking into it.
    Thanks,
    Brian
    JDev Team

  • Why can't I use the function of menu item 'issue delivery output'?

    why can't I use the function of menu item 'issue delivery output' in main screen of delivery note?
    And at the same time I can't use the button of printing in main screen of delivery note.
    the main screen of delivery note I mean above is in screen of maintaining shipping data instand of the first screen of VL02N.
    TKS in advance.

    Hi,
    Because delivery will be having header level output and item level output. So if u try to print through main screen then system will not know whether it is header related or item related. That is the reason it is only print output at header level or item level but not in main screen.
    I think u may have doubt like how billin will be issued output through Main screen. Because for billing both header and item level data are same..
    Regards
    Sankar

  • Why can't I use the Basic brush tool?

    I'm learning the ropes of drawing in Illustrator and I've fallen at the first hurdle. Why can't I use the Basic brush tool? Whenever I select the brush tool and use the 'Basic' brush type, the cursor turns into a hashed circle indicating I can't draw. If I load other brushes, I can draw with other brush types, but I can't use the Basic one. If I select the Basic brush when I have other brushes loaded and try to draw with it, it always defaults to a different brush! I don't understand why.
    On a related matter, I'm also having trouble changing brush size. I know that using the [ and ] keys changes brush size, but I have no idea what the values are. If I try this in Photoshop, I can see the brush size in the Options bar, but in Illustrator it doesn't appear anywhere! Not in the Brushes palette, the Stroke palette or the Appearance palette. Where can I see the brush size?

    Glitcher,
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Why can't I use the landscape feature for iPhone 5? It only works in limited apps. I feel as though I wasted my money since I prefer to use my phone in landscape mode.

    Why can't I use the landscape feature in all of the apps? It seems like a waste of money since I prefer to use the landscape feature.

    It is up to the app developer to decide if the app should work in landscape mode or not. This is also true on Android phones, by the way.

  • I can't enter to youtube? Why can't i use the internet in my campus from college?

    i can't enter to youtube? Why can't i use the internet in my campus from college?

    It is entirely possible your college has decided to block certain websites. It's easy to do.

  • Why can't i use the old remote control to change slides in the latest version

    why can't i use the old remote control to change slides in the latest version of keynote

    It would help to know what remote control your talking about, there are hundreds out there.

  • Exporting to Facebook - why can't I use the old plug-in?

    It's nice that iPhoto '09 tried to help us with the Facebook exporter built-in. But why couldn't they make it useful? Why can't I tag people before I upload them? Why can't I upload photos to an existing album? I wouldn't mind so much, but they seemed to have disabled the existing (working) plug-in that was available. So now I have to export the pictures to my desktop and upload them through Facebook. Hmm...doesn't seem too user-friendly.

    Exporting to Facebook - why can't I use the old plug-in?
    Have you considered asking the author of the plug-in?
    It's nice that iPhoto '09 tried to help us with the Facebook exporter built-in. But why couldn't they make it useful?
    Millions upon millions of people do find it very useful
    Why can't I tag people before I upload them?
    You can - have you watched the iPhoto tutorials?
    Why can't I upload photos to an existing album?
    You can IF the album was created by iPhoto
    Do you have an iPhoto question that one of the iPhoto users who volunteer here might be able to help with?
    LN

  • It says in the corner of my itunes account that i still have money from my itunes gift card that i redeemed, but when i buy a song my billing info pops up. Why can't I use the money?

    It says in the corner of my itunes account that i still have money from my itunes card that i redeemed, but when i try to buy a song, the billing info. pops up. Why can't i use the money on my card?

    It is simply asking you to verify your account info. Select None for the CC.
    It will still pay with your gift card balance.

  • Why can't i use the rest of my money on my iTunes redeem money

    Why can't I use the rest of my money that I redeemed my I tunes card with.

    You do not state your issue and what happens when you try...
    So...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • Account Determination

    Hi friends I got the error while releasing the billing document to accounting, Posting keys for account determination for transaction EXD do not exist Message no. F5598 Diagnosis The posting keys necessary for account determination for transaction EX

  • Driver Issue on Vista x32

    Since I have upgraded to Vista from XP I am having trouble accessing my phone. My phone model is a 7250i and I connected through CA-42 I downloaded the new Nokia PC Suite which is compatible with Windows Vista. I followed instructions to install PC S

  • Help! Authorization question

    OK, this might be a silly question, but I thought I'd give it a shot. I have iTunes installed on two computers. One doesn't have the internet hooked up and to listen to certain songs, it says I need to authorize them. So is there any way I can author

  • How to get status of

    I'm using a table linked with a CachedRowSetDatasetProvider and I have to implement the following rule : "the column can be edited only if the row is being appended, else it will be display only" I want to dynamicaly change the representation of a co

  • Bid Invitation

    What is the o/p type for bid inv form BBP_BID_INVITATION for viewing the print preview?