Why can't wireless devices connect to my airport extreme? i have 2 macbooks and an iTouch. only 1 macbook will connect. help!

i've had my airport extreme for over a year now. and it works perfectly with my original macbook. however, when other people visit, they can see my network but they can't connect. i also recently purchased a new macbook. and again, my new macbook will see my network but it won't connect. my iTouch has the same problem. help, please!

When only a single device can connect, that typically indicates that there may something not configured properly with the DHCP server service in the AirPort. Is your AirPort Extreme connected directly to a simple broadband modem or to another router upstream of it?
If it is a modem, please try a complete power recycle of all of your networking equipment.

Similar Messages

How come my iMac and MacBook connect to my AirPort Extreme but my iPhone and iPad 2 won't?

How come my iMac and MacBook connect to my AirPort Extreme but my iPhone and iPad 2 don't?

Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Why can I not watch the entie tv show series I have bought and paid for? This is **** up for iTunes to take my money and not deliver!!!

I am VERY upset after spending a chunk of money for the entire series of Walking Dead on ******* itunes. I cannot watch any of the **** episodes but the first 30 seconds. How the **** can i get my money back and warn others of this rip off?? Being an Corporate Attorney, do I need to sue iTunes to get my money back?? Yes my language dont come from an spoken attorney but from an ANGRY user!!!!!!

Use the "report a problem" link on your receipt or your iTunes account purchases section to ask for a refund.

Wireless devices cannot detect my airport connection on imac

Why can't wireless devices detect my airport connection on imac

Ensure the media share features and USB drive support is enabled on the router after it's connected.

I am trying to get an answer to whether or not I can successfully use Time Machine with an external HDD connected to an airport extreme? Some forums say yes, some say no.

I am trying to get an answer to whether or not I can successfuly use Time Machine with an external HDD connected to an airport extreme. Some forums say yes, some say no. I'm also curious about formatting the hard drive to work both on my wife's MacBook Pro and my PC. Any help would definitely be appreciated.

You may be going on a recollection, that I share, that at one time Apple stated this would be possible:
In fact, Apple’s Time Machine Web page touted this very capability as recently as last Tuesday, as you can see from Google’s October 16 cache of the page
Effortless meets wireless. With a hard disk connected to your AirPort Extreme Base Station, all the Macs in your house can use Time Machine to back up wirelessly. Simply select your AirPort Disk as the backup disk for each computer and the whole family can enjoy the benefits of Time Machine.
But if you look at the current Time Machine page on Apple’s Web site, that text is nowhere to be found.
That was a long time ago, it has never been officially implemented, and at present they specifically say it cannot be done.
In summary, it may work, but probably won't, and even if it does it may not be reliable.
Reference:
Disks that can be used with Time Machine
Time Machine can’t back up to an external disk connected to an AirPort Extreme, or...
and
Mac OS X v10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks

Saving files to a hard drive connected to my Airport Extreme

I just upgraded to Leopard. I am unable to use Backup v 3.1.2 to save files to a hard drive i have connected to my Airport Extreme. Previously, using Tiger i was able to perform this task.
I use Finder and see my airport express network and my external hard drive. However, when i run my backup jobs using Backup the program can not located the external hard drives.

The discussion was helpful. My hard drive connected to my Airport Extreme is now recognized and i can backup files to a folder called 'Backups'. However, i am only capable of saving to this one folder. When i try to create subfolders and select one of them as my location in the Backup program i get an error message; "the selected location is not a valid destination". Any idea how to get around this problem?
Many thanks for the quick response to my previous mail.

Why can't i log in my iTunes account? My wifi works and when I log in my iTunes it says "cannot connect to iTunes Store"

Why can't i log in my iTunes account? My wifi works and when I log in my iTunes it says "cannot connect to iTunes Store"

You may not be connected to the internet. Does Safari connect?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can’t connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

Where can I see what devices are connected to my Airport Extreme?

I just switched from a Belkin wireless-g router to the Airport Extreme (802.11n). With my Belkin router, when I entered the address "192.168.2.1", I was taken to a menu where, among other things, I could view all connected devices. How do I do that with my new Airport Extreme? Thanks!

Hi David, welcome to the discussions!
You will have to dig a bit for the info, but it is there.
Open AirPort Utility
Click on Manual Setup near the bottom of the pane
Click on the gear shaped Advanced icon at top of the window.
Click on Logs and Statistics
Then click Wireless Clients or DHCP Clients to see who is connected.

HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
Thanks,
Ivette

You would need to get the IP address of your printer then manually add a network print queue.
To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

Why can't I connect to my airport extreme(4th gen.) after reseting the password

i was changing the password on my airport extreme(4th gen.) and it said that i changed it succesfully but it had a error when it was restarting and i can't connect back to the internet what should it do

Please perform a Factory Default Reset to clear the old, and possibly corrupted settings on the AirPort Extreme to get it back to original settings. Then, reconfigure the device again using the passwords of your choice.
Resetting an AirPort Base Station or Time Capsule FAQ

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook..
why is it sooo hard still --- can anyone inform me on this miracle app please
thank you
sincerely
Theigalaxy

find my iphone is something one needs to activate on the phone itself using the same appelID is nowhere near enough
if it is then one can track, play a sound and remote whipe it from
www.icloud.com
if your screen is smashed and you think you can use find my iphone to get any data from your phone you are sadly mistaken

How do I make a wired connection to my Airport Extreme that will share the same network as any wireless connection to it?

Here's the set up.
I have a cable router into the house and then an Airport Extreme connected to it. Everything connects wirelessly to the Airport Extreme apart from one computer in the same room as it, which I wired into the AE with a cable (it's a gaming PC and has no wireless).
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.

There is nothing stopping you connecting to the wireless computers if you have sharing turned on..
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.
I don't quite follow this..
If the cable modem is a router.. the AE must be in bridge mode..
So all routing is handled by the cable modem router.. and the wireless clients will all be in the same IP range as the PC is.. please check that by opening the PC command window and type ipconfig /all
Then go to one of the wireless devices and check that it also has the same IP range.. eg,, 192.168.x.x and same router or gateway address eg 192.168.1.1 and same DNS.. which is the same as the router address..
Then in the command window of the PC use the command ping to see if the other devices respond.. ping it by name or by IPaddress.
If there is no response.. windows has decided it is in a public network.. and slammed up the firewalls.. make sure your network is set as home for location.. and make sure the firewalls .. you can have multiple if you have an internet security package are not blocking local network access.
Also remember PC and Mac in a network can take a bit of fiddling to see each other. But ping should always respond and in both directions.

Windows 7 laptop can't connect to new Airport Extreme.

I had a NetGear router, but got fed up of not being able to use all of my devices, so I bought the AirPort Extreme and use the NetGear as a modem (wireless turned off). Our iPads, iPhones, Macbook, Windows Vista laptop and desktop all connect fine, but I can't get the Windows 7 laptop to connect, even by ethernet.
It has connected but drops the connection intermittently and then sometimes it fails to get a connection at all. It can see the AirPort, but says it can't connect. This happens paticulalry if the laptp has been left to hibernate.
I have installed the AirPort utility and I have turned off the power option that turns off the wireless card. I have done all of the Windows updates, and I have updated the drivers from the manufacturer website.
Any ideas? (Don't say use the Mac, this is my sister's computer, not mine!!)
Thanks.

Thanks for clarifying. If you don't mind, let's double-check your extended-network setup configuration:
o Open AirPort Utility and select the Time Capsule (TC), and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar, and then, click Wireless.
o Verify that both “Create a wireless network” from the Wireless Mode pop-up menu and “Allow this network to be extended” checkbox are selected.
o Next, select the 802.11n AirPort Extreme Base Station (AEBSn), and then, choose Manual Setup from the Base Station menu.
o Verify that “Extend a wireless network” has been selected from the Wireless Mode pop-up menu. Also verify that the correct Network Name is shown for the network you want the AEBSn to extend.
Do your settings match these?

Why can't wireless devices connect to my airport extreme? i have 2 macbooks and an iTouch. only 1 macbook will connect. help!

Similar Messages

Maybe you are looking for