Why cant I use the txt alert tone I downlowded for my incoming txt msgs?

I downloaded an alert tone to use for incoming txt msgs but for some reason It as gone to ringtones & I cannot use it as my recieved txt msg tone no longer, is there any way of changing this?

I downloaded an alert tone to use for incoming txt msgs but for some reason It as gone to ringtones & I cannot use it as my recieved txt msg tone no longer, is there any way of changing this?

Similar Messages

  • Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

    Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

    What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.

  • Why Cant I use the copy and paste command in elements 7.0?

    I want to create gifs using images I created, but each time I try to use the copy command (ctrl+c) after the selecting the image, It wont allow me to.It keeps saying its because of a program error. I updated it, but I still cant use the copy command?
    help me please....

    See if resetting the photoshop elements 7 preferences clears things up:
    Restore all preferences to default settings  
         Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop Elements. You are prompted to delete the current settings.  
    New Preferences files are created the next time you start Photoshop Elements.  

  • Why cant i use the filer gallery option in photoshop

    Is there any reason as to why I cannot select the Filter Gallery option in photoshop cc. I noticed it is not with all my images.

    What do you mean, "not with all my images?"
    The menu needs to be made visible via the Preferences - Plug-ins panel.
    After that, your image needs to be 8 bits/channel RGB in order to use the Filter Gallery features.  Adobe has not updated all these filters to handle deep data (16 bits/channel or higher) images directly.
    -Noel

  • Why cant you use the fingerprint to unlock phone after it is disabled?

    Is there a way to unlock your phone using the fingerprint scanner after it has been disabled?

    No - you will need to do the following: iOS: Forgot passcode or device disabled

  • Why cant i use the internet if my wifi says it has a strong signal

    my wifi at home is connected to my ipad and it shows a strong signal, but it wont work for any apps that need internet or the web browser. how can i fix this promblem ive tried reseting the network settings and that worked for like a minute and now im having the same problem

    You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why cant I use the screen record feature on quicktime 7.7.2

    i have recently got apple QuickTime player 7.7.2 pro. One of the main reasons I got it is because i knew in past versions they had the screen record feature, but on the 7.7.2 pro version it didn't. i was disappointed that it didn't have the feature that the other versions had. before i got it i decided to update the version I had (The one with the screen record feature) and now i wish i didn't update it. I think the screen record feature was cool and i dont know why its gone. Also i am using windows.

    QuickTime Player Pro has never included screen capturing features.
    QuickTime X (found in Snow Leopard, Lion and Mountain Lion) does include screen capture features.

  • I have Adobe Presenter 9  Why cant I use the Application Simulation in the Ribbon?

    Any Help ?
    Its Grayed out, whats the point of it being there if it doesnt work?

    Hello,
    You need to have Adobe Captivate installed on your machine for this feature to work.
    If Presenter does not find Captivate, this feature will be grayed out.
    regards,
    mukul

  • I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

    I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Why is the amplitude smaller when using the Extract Single Tone VI to measure the amplitude of a signal?

    Whenever I measure the amplitude of a signal using the Extract Single Tone VI, the amplitude is smaller than if I measured the signal by hand by positioning the top and bottom cursors to the highest and lowest peaks of the captured waveform.  Should I not use the Extract Single Tone VI to measure amplitude?  I'm using Labview 6i.

    I'm not exactly sure but I think the amplitude from the Extract Single Tone vi is in peak volts (Vp).  When you use the cursors on a scope set to the top and bottom peaks, you are measuring volts peak to peak (Vp-p).  If the Extract vi amplitude is one half of your scope reading, then this is true.  Just double your Extract vi amplitude to get the peak to peak voltage.  It also depends on the signal.  If your signal is a square wave from 0 to 5 volts (TTL), this is usually measured in peak voltage.  A sinewave going positive and negative (from -5 to +5) is usually measured in peak to peak.
    - tbob
    Inventor of the WORM Global

  • Why cant i use wifi at home through the router?

    My PC can get on the internet through the router, why cant iphone4s connect the wifi?
    Is it my settings problems? how can i set it? tell me, please. thank you.

    Does the iPhone connect to other networks?
    DOes the iPhone see the network?
    Any error messagee when you try to connect?
    Try:
    - Reset the iPhone. Nothing will be lost
    Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPhone.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

    WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

    hey there DavoMrMac,
    according to Apple's 'site:
    System Requirements
    Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
    512MB RAM
    Display with 1024-by-768 (or higher) resolution
    An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
    Mac OS X 10.4.6 or later
    QuickTime 7.0.4 or later
    HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
    500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
    DVD drive for software installation
    i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

  • Why cant I use relative paths in Netbeans

    Why cant I use relative paths in Netbeans to files on my PC.
    I want to be able to copy my project folder between different drives and pcs dont want to edit the code everytime I do.
    BTW I didnt know where on the forum to post this. Just in case this is the wrong place.

    When I use relative paths it doesnt see the files. Like when I want to add an image to a panel. If I use '../image.jpg' it wont work but if I use 'd:\javafiles\images\image.jpg\ it will work.
    Cant seem to fix it.

  • Why cant I change the wireless carrier

    Why cant I change the wireless carrier on my IPAD. Verizon has very weak signal and cost more for where i use it

    Updates the Bold Text setting to also change dial pad text
    When you view the details before installing it is one of them.
    Adds iCloud Keychain to keep track of your account names, passwords, and credit card numbers across all your approved devices
    Adds Password Generator so Safari can suggest unique, hard-to-guess passwords for your online accounts
    Updates lock screen to delay display of "slide to unlock" when Touch ID is in use
    Adds back the ability to search the web and Wikipedia from Spotlight search
    Fixes an issue where iMessage failed to send for some users
    Fixes a bug that could prevent iMessage from activating
    Improves system stability when using iWork apps
    Fixes an accelerometer calibration issue
    Addresses an issue that could cause Siri and VoiceOver to use a lower quality voice
    Fixes a bug that could allow someone to bypass the Lock screen passcode
    Enhances the Reduce Motion setting to minimize both motion and animation
    Fixes an issue that could cause VoiceOver input to be too sensitive
    Updates the Bold Text setting to also change dial pad text
    Fixes an issue that could cause supervised devices to become un-supervised when updating software

  • Why cant I have the date format like this:  1/2/07, it converts to Jan 2

    Why cant I have the date format like this: 1/2/07, it converts to Jan 2, 2007
    I want to keep it like that because, I transported a huge spreadsheet from my PC, and it has like this: 1/1/07, and there is way to many, to go back and change. Please help. Thank you.

    Hello
    Welcome to the club.
    The response seems to be simple.
    Those who wrote the Help are not those who wrote the PDF User's Guide which are not those who coded the application.
    As on this forum you will met only users trying to help other users, no one would be able to tell you if what we got is a bug or a design flaw.
    Like many of us,
    *Go to "Provide Numbers Feedback" in the "Numbers" menu*, describe what you wish: a way to define the default format used as Automatic date/time.
    Then, cross your fingers, and wait for iWork'09
    Yvan KOENIG (from FRANCE mardi 15 janvier 2008 15:10:17)

Maybe you are looking for

  • NetAdmin crashes on open

    Please help to solve the problem. Installed NetAdmin from AppStore 5 mnth ago and was using constantly. One day got an unresponsive computer for a long time and done a hard reset (holding the power button). After that NetAdmin crashes on open all the

  • Dreamweaver CS3 instead CS4 for optimization on older hardware . . .

    Dreamweaver CS3 instead CS4 for optimization on older hardware . . . I do design for print and every year more and more customers have asked me if I would design their web site after I have designed their brochures and other collateral. For the last

  • TS4009 where is icloud on my computer?

    how do access and manage my icloud account on my MAC?

  • CHAR as out parameter in a stored procedure

    Reading a CHAR out parameter from a PL/SQL stored procedure with getString() returns a string with 32000 chars, instead of 3 (the original variable size). If the parameter is defined as varchar2, no problem occurs. Here is an example: create or repla

  • Error 9006

    Whenever I purchase a song or album it stops downloading and gives an error: err = 9006. Does anyone know what this means and how I can fix it?   Windows XP