Why do I have to keep setting up my iPad almost every time I start my iPad?

Lately-it seems that with greater freaquency my ipad is saying it is not setup, I can't do anything until I reset it all back up. it happens almost everytime i start up now. ARGH! does anyone have answers, it seems to have started after the last update.

No Problem Demo.. They said to keep trying they would get back to me later this week, she had to talk to the tech people that has a longer history than what she has availabe.. We also ran the diagnostics on the ipad and all is fine with the firmware and the battery.
One thing that leads me to believe i am locked out of the servers, when i do a restore through itunes I get that little lock in the window just above where it says the servers are unavailable.
I have also been intouch with verizon and they said they would run some diagnostics on there end and would get back to me, that was 2 weeks ago.
Thats what I like about apple they're good on the follow up.

Similar Messages

  • HT203208 Why do I have to keep putting in my security code every time I buy?

    I have to put in my credit card's security code every time I buy something from iTunes. I seem to be the only person that has to do this because I've asked friends and they don't have to do this. Is there a setting I need to change in my iTunes profile?
    Thanks in advance.

    No Problem Demo.. They said to keep trying they would get back to me later this week, she had to talk to the tech people that has a longer history than what she has availabe.. We also ran the diagnostics on the ipad and all is fine with the firmware and the battery.
    One thing that leads me to believe i am locked out of the servers, when i do a restore through itunes I get that little lock in the window just above where it says the servers are unavailable.
    I have also been intouch with verizon and they said they would run some diagnostics on there end and would get back to me, that was 2 weeks ago.
    Thats what I like about apple they're good on the follow up.

  • Why do I have to keep entering my username and passord every time I log in??

    Every time I log into my e mail I have to re enter my user name and password. There has to be a setting to prevent this. It onlu happens on this computer!!

    Test after taking each of the following steps. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. Repair permissions on the startup volume.
    7. Turn off Bluetooth and test.
    8. Reset the System Management Controller.
    9. Reset the PRAM.
    10. Reinstall OS X.

  • Why do I have to search for a wifi network most every time I use the internet?

    Why do I have to search for a wifi network almost every time I use the internet?
    We have Cox internet on a wireless router.
    It doesn't seem to be able to hold the wireless connection.....even a couple hours.
    The router sits on the desk next to the computer.
    Thanks for any suggestions you have.

    I don't have any trouble connecting to the internet once I choose our network from the choices.
    The computer just can't remember it.

  • LOVE FIREFOX HAVE TWO SHIRTS AVID MEMBER SENSE 2000. Why do i have to get "google" in google search engine every time to type in the address?

    LOVE FIREFOX. HAVE TWO SHIRTS, AND AN AVID MEMBER SENSE 2000. Why do i have to get "google" in google search engine every time to type in the address? It wasn't always this way. :-(

    Can you clarify where you need to make this change?
    Which searches aren't working for you?
    *searching via the location bar (pref: keyword.URL)
    *search bar on the Navigation Toolbar
    *search bar on the about:home page (pref: browser.search.defaultenginename)
    *other search bar (e.g. added by extension)
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Why do I have to turn on my wi-fi manually every time I log into my computer? Can't it just log in when I do?

    Why do I have to turn on my wi-fi manually every time I log into my computer? Can't it just log in when I do?

    Test after taking each of the following steps. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. Repair permissions on the startup volume.
    7. Turn off Bluetooth and test.
    8. Reset the System Management Controller.
    9. Reset the PRAM.
    10. Reinstall OS X.

  • Help! I have to keep entering my wifi WEP password every time I slide my iphone 4S on  again.  It doesn't store the password as it should.

    Help! I have to keep entering my wifi WEP password every time I slide my iphone 4S on  again.  It doesn't store the password as it should.

    The use of WEP is not recommended for compatibility, reliability, performance, and security reasons; WEP is insecure and functionally obsolete. Any reason you're using WEP? I ask, because you might as well not have any security at all, & this is most likely your issue.
    More info here:
    http://support.apple.com/kb/HT4199

  • Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.

    Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.

    This is not just annoying, it is wrong, because at the end of the trial it will stop completely. You must resolve it before then.
    So, did you do anything to license the trial version? It needs to be told that you have purchased, or it will stop working at the end of the trial.

  • On our iMac, we keep getting the message "safari has quit unexpectedly."  It used to happen occasionally, now it's almost every time we start Safari.  Help!

    on our iMac, we keep getting the message "safari has quit unexpectedly."  It used to happen occasionally, now it's almost every time we start Safari.  Help!

    Can you post a copy of the crash report?
    Go to your Applications Folder and open your Utilities Folder. Open the application Console.
    In the left-hand column, click on Crash Reporter.
    Click on the small triangle under Crash Reporter in the l/h column and they will all be listed.
    Scroll down to the latest Safari report and click on it.
    Now click on the r/h column (which now only shows THAT crash report and then Command-a to copy it all.
    Come back here and Command-v it to post it here!

  • Why can't i save my WiFi password in my IPad? Every time i turne my iPad off the password disappear! Help please!!

    Why can't i save my WiFi password in my IPad? Every time i turne my iPad off the password disappear! Help please!!

    Create a new SSID and password for your router.

  • Is it possible to NOT have 'Restore Previous Session' option come up automatically every time you start Firefox?

    A large envelope pops up mid-screen every time I start Firefox, asking if I want to restore previous session. I don't want all users after me to have this option, but don't want to keep an empty history either. Can I deselect this option somewhere? Looked around, but found nothing.

    Unfortunately changing the options found under "Completely disable session restore" does not make any difference to this problem.

  • I have to enter login information and "secret phrase" every time Firefox starts up.

    I have to enter login information and "secret phrase" for Sync every time Firefox starts up. Sync tells me I am using a new computer, which isn't the case. This is the same computer I set up Sync with.
    What am I/is Sync doing wrong?

    There could be several things.
    Does everyone using the computer have their own user profile?
    Check the history settings. Is it set to remove cookies?
    Type '''about:preferences#privacy''' <Enter> in the address bar.
    The button next to '''History,''' select '''Use Custom Settings'''.
    Some Anti-Virus, Disk Cleaning, and other programs will remove things
    from your browsers. Including history and cookies.

  • I have to re-install adobe flash for firefox every time i start my computer even if firefox shows that my adobe flash is working it does not.I also get notices from the websites i visit (get flash e.t.c.)

    i have the latest firefox 10.02 in win7 and even if firefox shows is installed my adobe flash is not working so i have to run the flash installer every time i start my pc.After this everything works fine until the next start when i have to run the flashinstaller again

    There are two versions of the Flash Player plugin. One is ActiveX and only works in IE. It sounds like you have that one installed. The other one works in all other browsers.
    What seems to be happening is that you have security software that's blocking one of those versions of Flash/restoring your computer state and so it gets uninstalled when you start your computer. The other possibility is that there are permission issues. Unfortunately, this isn't something that Firefox can control; it's a problem with the Flash installation (Firefox is dumb and just looks in the registry for a list of installed plugins to load).
    Make sure that you're an admin on your computer when you try to install Flash and that you check your security settings. If that doesn't work, try posting to the [http://forums.adobe.com/community/flashplayer Adobe community forums] to see if other people have had similar issues and know how to address them.

  • Why do I have to select my network using Network Diagnostics every time I turn on my MacBook Pro and go to Safari?

    Every time I turn on my MacBook Pro, before I can use any programs that access the internet (i.e. iTunes, iBank, etc), I have to go into Safari where it prompts me to perform network diagnostics.  (I use a wep encrypted wireless network.)
    During network diagnostics, I select my network and at some point it tells me that my network appears to be working properly and then defaults to the Apple.com webpage.  I then Quit network diagnostics and exit Safari and then I am fine to do whatever I need to in the other programs.
    This is quite annoying and I wish it would just remain on my network without me having to do this every time I turn it on.  Is there some thing I can do or some setting that I am missing that would allow me to avoid this?

    Is your network hidden? See:
    WiFi, Internet problems, possible solutions
    Secure your network
    WiFi security issues, at home and WiFi hotspots
    Change the name of the network and the password, then connect manually and when it asks to save in Keychain do so.
    If it's still giving problems and it'a not the router, it's the computer, then go through this list.
    Step by Step to fix your Mac

  • Why do I have to use security code for wifi router each time I turn on iPad 3?

    Why do I have to enter wifi security code for my router each time I turn on ipad3?  I have checked all the settings I could but is this a router problem?

    If you're hiding your network SSID and/or using WEP security, I think these can cause this problem.  If you're hiding your SSID, there's really no point in doing that since there are ways people can easily see it if they're looking to do harm anyway.  If you're using WEP security, consider changing to WPA2 which is much more secure than WEP.

Maybe you are looking for

  • Encrypted Time Machine Drive not visible

    Hi, I have a Mac Mini (2.53 GHz Intel Core 2 Duo with 4GB 1067 MHz DDR3 Ram) running OS 10.8.4 and all other OS/application updates have been run.  I have a Drobo (2nd Generation, the one with four drive bays & Firewire) with 3.69TB used and 1.72TB f

  • Passing numerical variables to and from a Java class

    I'm trying to do something that seems like it should be fairly simple, but apparently it isn't. I'm new to Java and JDBC, so I'm hoping that I'm missing something fundamental and fairly basic. Basically, I want to pass a set of (number) variables to

  • How can i make Vendor balance ZERO incase of  Debit vendor and Credit-GRIR

    We also have a document from last year,It is a debit amount in the vendor account. How could I get rid of this balance to make the vendor have a zero balance? the entry is - Debit - Vendor Credit-GR/IR Clearing Credit-Contact Repair Thanks Supriya

  • Object Visualization and accessing the object's attributes

    Hi all, I am trying to configure SWFVISU to allow us to call an ABAP Web Dynpro which displays an adhoc object attached to a workflow in the UWL. I've had success with a business object of a task which is not an adhoc object by binding an attribute t

  • Wireless Clients failing to authenticate via the RADIUS

    Hi friends I am trying to use Radius server (NPS) to authenticate my wireless users using 1941W router. For some reason it cannot authenticate successfully. I checked the radius server is reachable but still I dont see any luck. the config is like th