Why does burnt memorex music cd wave back and forth when played in Itunes

Why does burnt memorex music cd, burnt on a Teac Unit , wave back and forth when played in Itunes (Music Goes In and Out) ?

Open the music app and tap the song screen with a song playing. Turn off the Repeat feature.
See p. 59 of the User Guide... http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

Similar Messages

Cannot find anyplace to tell a page to wrap within browser margins, so one does not have to slide it back and forth to read each line.

Cannot find anyplace to tell a page to wrap within browser margins, so one does not have to slide it back and forth to read each line::::::::::::
Yes, there are so many pages on-line that -- when made small enough to fit within the margins so one does no have to use a scroll bar on EVERY line, moving it back and forth, back and forth -- look like a FINE-print Bible page (!! tiny !!) if you keep reducing it to fit within the margins.
ALL because we cannot find a place to tell it to WRAP to FIT. Could have sworn I've seen some feature like that somewhere at one time, but if it is here, I cannot find it.
Thank you.
gina

Maybe use a style.
Add code to userContent.css
* http://kb.mozillazine.org/userContent.css
<pre><nowiki>body, body *{ white-space:pre-wrap!important; word-wrap:break-word; }
</nowiki></pre>
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
* http://kb.mozillazine.org/Editing_configuration

Why Does Logic Pro Repeatedly Asks for Serial # and XSKey When Started?

I've purchased and installed an upgrade to Logic Studio 9. I previously used Logic Pro 7 but did not have it installed on my MacBook Pro when I installed Logic Studio 9.
The installer asked for the Logic Studio 9 serial number which I entered and then prompted for the original serial or XSKey. I dug out the Logic 7 XSKey, plugged it in and it was accepted so I could continue with the installation which completed successfully.
So far so good.
But now Logic Pro 9 asks for the serial number and XSKey every time I run Logic which isn't what I expect. I re-enter the new serial number and then plug in the XSKey which is accepted and the software runs as expected, but I would prefer not to have to do this every time I start the application, in particular because I don't want to carry the XSKey around with me at all times.
Why isn't Logic 9 storing my serial number? Why does it ask for the serial # and XSKey every time I start the application?
I'm not running Logic as an admin user. Could this be preventing Logic from storing the serial information?
Any help would be greatly appreciated.

I had this when upgrading from 7 to 8. What I did was plugin the xskey BEFORE I started the upgrade and it never asked for a key or serial again after that.

Facetime does not log in. Goes back and forth between two pages

Created an entirely new Apple ID and password. On WiFi and good speed. Not a tech noobie. When I open Facetime, enter username and pass, select "Sign in" it will go to the "next" page, and display, "People will call you using your email address....., and displays the email address, with a "next" button at the top. That page will then quickly disappear, and will go back to the original sign in page. Nothing happens. I have tried everything, turning Facetime on and off, resetting the iPad, etc. Seems that lots of other folks are having problems with this app too. Do I need to reinstall IOS 5.0.1? Please help. Thanks.

OK, it's now working. I followed each and every step in the troubleshooting area, including making sure date and time are set properly (they were), and turning on "Set Automatically" (it wasn't), then restarting the device. Here are the steps.
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in Settings > FaceTime.
If the issue persists or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
If you don't see the FaceTime setting, ensure that Camera and FaceTime are not disabled in Settings > General > Restrictions.
Verify that the date and time are set correctly:
Tap Settings > General > Date & Time.
Toggle Set Automatically on.
Verify that both parties are connected to a Wi-Fi network and have an active Internet connection.You cannot make or receive FaceTime calls using a Cellular Data network connection.
FaceTime uses push notifications to send and receive invitations. Verify push functionality using Mail or other applications that use this feature.
Restart the device.

Why is my ipad 4 suddenly going back and forth between the logo screen and lock screen and wont reset when i hold the power and home buttons down? please help, apple store is very far from my house

my ipad has never been dropped or overheated, but suddenly the screen went to the lock screen and then the logo screen and it keeps doing that. i tried resetting but its unresponsive. is this a common issue with ipad and whats wrong with it? i was checking the AccuWeather app when this happened and my battery was full if that helps. thanks

Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

Why does quicktime 7 cause a reboot of windows xp when playing a .mov?

How come quicktime 6 works fine and plays my .mov files and allows me to transfer video from my digital camera whereas quicktime 7 causes a system reboot and i cant watch my videos? with quicktime 7 opening the folder containing the .mov or clicking on the .mov causes the screen to become black with blue characters on it that are not letters or numbers. then the bios screen comes up, eventually bringing me back to the desktop.
id be perfectly happy using quicktime 6 on my computer since it works great, however after i uninstalled quicktime 7 and reinstalled 6 i found out that i need quicktime 7 for my itunes. what do i do?
please help me.

that did not work, nor did changing quicktime into safe mod.
what is the difference between quicktime 6 and quicktime 7 such that 7 will cause windows to reboot after the weird black screen with blue nonsense (not letters or numbers) on it everytime i try to play an .mov file?
can i revert to a version of itunes that will allow me to used quicktime 6 without any negative effects to my current setup on itunes 7?
please help, this is very frustrating.

Getting an object to move back and forth

OK, at first this seemed like the easiest thing to do, but I've tried to make it work a number of different ways and nothing seems to work. I have a movie clip that I want to have constantly moving back and forth across the stage, basically "bounce" off the left and right sides. What's the best way to do this using AS2?

Nope, no AS, just a regular tween added between two keyframes. The tween is on the timeline of the movieclip, not on the main timeline. So, when the movie clip loads it automatically runs through it's own timeline. It gets bigger and bigger, then at the end of it's timeline the movieclip gets removed. The timeline seems to play properly because after a couple second the movie clip does get removed, it just doesn't get bigger. Why would having one movie clim move back and forth stop another movie clip from using it's tween?

The box {cannot use app in safe mode} would you like to temporarily switch, I press continue and it goes to please log in, and these two boxs go back and forth not allowing me to continue the game like farmville etc.

the dialogue box says {we cannot continue with this app in a secure mode. Would you like to temporarily disable to an unsecured mode and you will be able to use the app at your next log in.} I push the "Continue" button, not the cancel button and it tells me to {Please log in, you are not logged in}. I will then log in and the original window as mentioned above comes back again. These two boxes go back and forth when I try to continue in any of the games on Facebook.

Hi thanks for all the concern and replies. I've tried all that.
I had just got it back from the shop last Friday. It was there for around two weeks. It was a faulty GPU (when you see garbled display that's consisten when booting it the GPU). I have a strong feeling it's related to the Lion install 10.7 or 10.7.1 and may be similar to reports of Mac laptops overheating. It's good the GPU is removable, it might have taken 3 week or a month if it had been the whole board.
It's a blessing in disguise though as with all or most cases because I also got to have the LCD replaced for excessive backlight bleeding (in my opinion), the dead pixel from the previous LCD isn't there anymore (though under the glass there're some smudges but nothing crucial). The backlight bleeding is still the same though in my opinion but at least it's new.
It's a great thing I bought Applecare. I didn't buy it for the iPhone because that's more durable (my iPhone 3G's 3 years old now and it's still solid. Although there are scratches and a crack at the back at the bottom, got sqeezed under the table I think when I sat). I think Applecare is a good recommend for things that get hot like desktop and laptop Macs(are the iOS considered Macs btw?) which are twice or thrice the price of iOS devices.
Gbu.

HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

Why does my iPhone sync hang at 'backing up'?

Why does my iPhone sync hang at 'backing up'?

Did iTunes ever create a successful backup during a sync? If yes it should be listed there.
Alternativly you can make sure that the iphone backup folder is empty and try again to sync. The folder is located here:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly it and switch back and forth from video to still pics and while I may have filmed four videos sometimes Quicktime tells me that one of them can't be pl

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly the drone and switch back and forth from video to still pics and while I may have filmed four videos , sometimes Quicktime tells me that one of them can't be played . Checking the info shows that each of the unplayed videos was saved in the same mp4 format as the playable ones yet some of my most important videos won't play . It's getting very frustrating .

first; I use Perian, that helps even though it is no longer supported, (must have for avi files)
the apple-cores at apple have gotten very sloppy -- quicktime is a bit finicky and flakey.
example,   occasionally (when copy file from quad's card to hard drive) the avi will show up as a 'mov' file and qt plays it no problem and no conversion.
but that is very occasionally, most of the time qt won't convert the file,   -- iMovie won't open an avi without Perian installed , I don't know how that effects qt.
qt 7"pro" is no good either, (qt 10 does everything it does and for NOT the extra $35)
I have gone to VLC and MPlayerX for direct playback for drones and cameras.

Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?

Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?
its been on for ages and its not even a quarter of the way backed up!

The Brave New World of AC wireless networking.. where the reality falls far short of the hype.
Unfortunately in an actual transfer situation, the signal to noise of wireless (RSSI figure drops dramatically), It simply uses AC as a link speed but speed is always renegotiated during an actual file transfer.. to some sustainable level. I suspect that level is not AC wireless but N.
It does matter if you run older devices.. nothing with a or b or g wireless should be running in your house. Even n wireless may cause issues.. try turning everything else off and see if you get speed lift.
As far as the time required for a clean up, is this a first backup as they always take a significantly longer time. Once you are doing regular incrementals the time is usually very short.

Why does my ipod turn off by itself and then turn back on after up grading to ios 7

why does my ipod turn off by itself and then back on after upgrading to ios 7

Try the standard fixes:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

FAQ: Why does my layer (camera) move back and forth between keyframes of equal value?

In some cases, the Auto Bezier spatial interpolation for Position keyframes can cause undesired back-and-forth (boomerang) motion between two keyframes with equal values. In such a case, you can change the earlier keyframe to use Hold interpolation or change both keyframes to use Linear interpolation.
To change the default to linear interpolation, choose Edit > Preferences > General (Windows) or After Effects > Preferences > General (Mac OS), and select Default Spatial Interpolation To Linear. Changing the preference setting does not affect keyframes that already exist or new keyframes on properties for which keyframes already exist.
For more information, including links to some video tutorials that demonstrate this problem and its solutions, see the "Controlling change with interploation" section of After Effects Help.

In some cases, the Auto Bezier spatial interpolation for Position keyframes can cause undesired back-and-forth (boomerang) motion between two keyframes with equal values. In such a case, you can change the earlier keyframe to use Hold interpolation or change both keyframes to use Linear interpolation.
To change the default to linear interpolation, choose Edit > Preferences > General (Windows) or After Effects > Preferences > General (Mac OS), and select Default Spatial Interpolation To Linear. Changing the preference setting does not affect keyframes that already exist or new keyframes on properties for which keyframes already exist.
For more information, including links to some video tutorials that demonstrate this problem and its solutions, see the "Controlling change with interploation" section of After Effects Help.

Why does my iphone come up with a different email when updating apps?

why does my iphone come up with a different email when updating apps?
Everytime I go to update my apps some other persons email or AppleID comes up and I have to cancel. its annoying enough to have to update all the time but now I have about100 update notifications (don't judge, you probably have a ton of apps too..haha) that are sitting idol, what's up how do I fix?
thx
Jackie
p.s. not updating to iOS6 yet

I'm sorry Allan, I should have clarified, your answer is improbable (well the first part atleast).
The apps I have had since the first week of purchase of my iphone back in 2011, I have not added any apps until 2 months before the last software update. This starting happening when the new software was implemented but I have not updated to iOS6 yet. Unless this person was able to hack into my account & transfer them to their account, I do not see how that is possible.
Prior to seeing this other AppleID, I have a popup to prompt me for my AppleID each time I download content. Each time I would see mine and enter my password.

Why does burnt memorex music cd wave back and forth when played in Itunes

Similar Messages

Maybe you are looking for