Why does my Dual Ethernet Snow APBS not get an answer?

My computer connects to the modem, the modem dials my service provider, but I get a "There was no answer" message. However, I can immediately switch the phone line to my Graphite or APE and they dial right through to my ISP.
Mac PowerBook G3 (Pismo), 400MHz, 40GB HD, 320MB Ram, DVD-ROM, AP Card, APE Base   Mac OS X (10.3.9)   Maxtor OneTouch II 300MB FW Drive,5 Partitions, 10GB in Enclosure

personalg33k wrote:
Sorry if my explanation of the problem was not clear, but the HD's are fine. I have checked them using fsck, disk warrior, TechTool Pro. they are fine. The drives are not showing up at all, and SATA shows "no information" Once in a while SATA will start working again briefly, then just GO AWAY! And the PCI SATA card I installed acts the same way. I am leaving one HD in the logicboard and one in the PCI card and they both go away (not the whole PCI card, just the HD).
Thanks for the reply.
OK, since you are also having things go away with the PCI SATA controller, this could be a problem with either (a) PCI-X bridge or (b) the U3 Memory controller, as they are the two things in the chain between the CPU and where you are having the problems.
Do you have other PCI cards in use? If so, then if you lose contact with them, that would be a clue.
On the other hand, you seemed to indicate that even when the Tempo lost the HD, you could still see the Tempo in System Profiler? If the Tempo is still shown in profiler, then, we have a real mystery on our hands. Of course, a system log file wouldn't help because you have lost it, unless you are booting from an external FW drive.
Watson, the game is afoot.

Similar Messages

  • Why does the WPA Enterprise Wifi Network not get displayed?

    I wanted to connect to the wifi of my university via eduroam and was not able to even get the eduroam network displayed in the list of Wifi networks. I'm sure that it was there, because I tried it on several spots and my laptop was always able to find it and connect to it. Could it be that WPA Enterprise is not supported? It's quite standard already, isn't it?
    There would be a second option to connect to an open network and add a VPN tunnel, but I could not find any vpn-Application for Firefox OS.
    Did I oversee something or is there really no possibility to access any of my university networks?
    I am using an Alcatel One Touch Fire (German language set) with current Firefox OS 1.1.0.0-prerelease

    It seems to me that WPA Enterprise is not currently enabled in Firefox OS.
    There are several bugs regarding this feature, among others: https://bugzilla.mozilla.org/show_bug.cgi?id=790056
    Regarding VPN, there is a recent thread, which also indicates that this feature is not currently supported. See the discussion here:
    https://support.mozilla.org/en-US/questions/967948
    It also lists the bug-id related to this features.

  • Why Does Adobe Captivate 8 Web Object Not Get Published Correctly

    Hi
    I am trying to insert a YouTube video in Adobe Captivate and publish it. While it previews fine, when i publish it as an SWF, i see just a blank frame.
    Can you help out here? Also, if I want to publish it as an PDF, will the video play there too?
    Warm Regards
    Akshay

    Hi Akshay,
    I am assuming the method you are using now is embedding Youtube videos into your Web object. My suggestion is it will be much easier if you use the Youtube Learning Interaction instead of a Web object to insert Youtube videos to your Captivate project.
    This can be found in the Interactions Toolbar -> Learning Interactions -> Youtube
    Also, as Sreekanth mentioned, please test it on a web server, or SCORM cloud.
    Youtube interaction will work when exported to PDF as well.
    Regards,
    Mohana

  • Setup Dual Ethernet (Snow) using Windows XP

    Is it possible to configure a Dual Ethernet (Snow) Airport base station using only a pc running Windows XP? If so, which version of the admin utility should I use and what's the exact process in order to get things setup?
    We've performed a hard-reset but it will not allow us to update the base station using 4.2 for Windows, because there's an error connecting to it via ethernet.
    Thanks!

    Thanks. That has helped point us in the right direction. In addition, I found this info particularly helpful in order to set the TCP/IP settings in the Network control panel:
    http://docs.info.apple.com/article.html?artnum=106685
    After changing those settings, we were able to configure and update the base station.
    However, after putting the TCP/IP settings back the way they were (obtain IP automatically instead of manually), the PC connected via the LAN port and the wireless can't connect to the internet at all. The base settings reveal that it's using an IP address starting with 169.xxx.xxx.xxx which tells me it can't get a real IP from the cable modem. Unplugging the cable modem, base station, restarting, etc. aren't doing the trick. Oh so close. I'll keep you posted unless you have any further suggestions.

  • Why does my macbook pro, snow leopard get so hot so quickly?

    why does my macbook pro, snow leopard get so hot so quickly?
    Can someone give helpful suggestions on solving this problem?
    Thanks!
    NELLY

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

  • Why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7.  I'm sure it did when I first got my computer.  Could it be that I have lots of other photo software that may be interfering?

    why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7.  I'm sure it did when I first got my computer.  Could it be that I have lots of other photo software that may be interfering?@@

    If you open the Organizer and go to Edit>Preferences>Camera or Card Reader, do you have Auto Launch Adobe Photo Downloader on Device Connect checked?
    Try checking that if you don't.

  • Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Why does my new Adobe Reader XI not allow double sided printing?

    Why does my new Adober Reader XI not allow double sided printing as the previous version did?

    Moving this discussion to the Scanning & OCR forum.

  • Why does my 7.0 iDVD theme not have sound playing in the menu?

    Why does my 7.0 iDVD theme not have sound playing in the menu?  When I click to get menu info, the "TravelAudio" audio is listed, but it won't play.  The volume is not the issue, it just isn't there. 

    Hi
    First of all - I would try to trash the iDVD pref file (or rather start a new User-account and log into this and re-try).
    Yours Bengt W

  • Why does my 4g and 3gs i phone get my message when its not group message?

    why does my 4g and 3gs i phone get my messages,same household but not group message same apple itune account thou.

    On each device check the following in the Settings app.
    Settings > Messages > Send and Receive
    Make sure the proper phone numbers and/or email address is selected on each. Deselect those that you don't want to use an a particular device.

  • Why does the password of Apple Id not paste from the clipboard at the Ipad?

    Why does the password of apple id not paste from the clipboad at The ipad 2 ?

    In most apps, you can't paste into the password field. It's a security risk.

  • Why does my Apple Mobile Device Support not uninstall?

    Why does my Apple Mobile Device Support not uninstall from the Control Panel?  It appears that my unsuccessful iTunes install requires that I clean up ALL Apple software,before trying again.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Why does my final cut pro is not responding every time I open it????!!!!!!

    why does my final cut pro is not responding every time I open it?

    As you give no background info nobody can possibly guess.
    However, have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • Why does my itunes say "Itunes could not connect to the iphone because the device timed out"? I just want to sync my iphone with my itunes. please help

    why does my itunes say "Itunes could not connect to the iphone because the device timed out"? I just want to sync my iphone with my itunes. please help

    If you are using a USB hub, don't. Connect directly to the computer. Disconnect all other USB devices except for keyboard and mouse.

Maybe you are looking for

  • Contacts duplicating on backup sync??

    When I sync my contacts (iphone to outlook 2007) it duplicates all the old contacts, so now I have 2 of the same contacts. How can I delete all duplicates in Outlook 2007 ?? Jay

  • Set nautilus as default file manager in kde?

    I would give kde a good chance, but I have several issues with konqueror. Is it possible to set nautilus as the default file manager in kde? I have started nautilus from kde before. Is this possible?

  • How to get it out of recovery mode.

    While in the process of running the update for ios 6 my phone went into recovery mode and I can't get it out.  Now iTunes won't recognize my phone.

  • Moving one slide to another presentation

    Hello, I need help. I have slides from one presentation I want to move to another presentation, but drag and drop isn't working and I just can't figure it out. How do I do it? Thanks

  • Quicktime export problem - failed(10)

    Hi there. Quicktime V7.1 has suddenly stopped working on my computer. Whenever I try to export, a few seconds after it displays 'calculating time', I get the message Failed(10). This seems to be irrespective of the format of the original video or the