Why does my Ipad tell me cannot connect to the store when I go to download ? I havee plenty of room for music

Why do I get cannot download cannot connect to store ?

The store appeared to down earlier (I had the same problemas did others), but I'm now able to download content again

Similar Messages

  • HT1689 Why does my ipad always says CANNOT CONNECT TO ITUNES STORE even when i got all the internet connections needed?

    Why does my ipad always says CANNOT CONNECT TO ITUNES STORE even when i got all the internet connections needed?

    Check to make sure you don't have your restrictions turned on, which may be preventing your access to iTunes.
    Tap on the settings icon, then tap General, then check to see if you have restrictions turned to ON.  If so turn it off.

  • Why does my iPad mini refuse to connect to the shared network connection from my mac mini?

    Sometimes it works, most of the time it just sits there "searching" with the little wheel just spinning away. I've tried resetting the network settings under the "General" tab as well as "forget this network" and have no password set, and still I get spinning. iPad Mini and Mac Mini are both up to date with software and have no current updates available. The iPad is only a couple of feet away from the Mac without anything but air between them. I have tried turning of wi-fi on iPad and back on again as well as turning off sharing and back on again and every combination I could think of and it's still spinning. I thought buying all apple products would make things easier to configure but that was totally WRONG.

    I managed to get the connection back! I renamed the network under "Wi Fi Options" from the "Sharing" screen and told the iPad Mini to forget the network. I then restarted BOTH the iPad and the Mac Minis at the SAME TIME. When they finished restarting the iPad Mini saw and connected to the new network almost immediately.

  • Since the last iphone update i have been getting the message cannot connect to itunes store when i try to download any application. How do i resolve this?

    Since the last iphone software upgrade, every time i try to download an application i keep getting the message "cannot connect ot itunes store". How can i resolve this? I have tried rebooting but that didnt work.

    Try logging out of your account on the iPhone by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months (or maybe a year or two) in the future and then re-trying

  • Why does my iPad 3 fail to connect to the Internet via a MiFi 4510L?

    On Sunday, I ran many tests under the guidance of a senior Verizon engineer to try to determine why the Verizon MiFi4510L mobile hotspot will not connect to the network on a third-generation iPad.
    In the course of our tests, we:
    1. Updated the firmware on the MiFi to the latest Novatel release: 2.23
    2. Tested the MiFi4510L with an iPad2, an iPhone 4 and the latest generation iTouch. In each case, they connected flawlessly to the network and held the connection.
    3. Removed the MiFi4510L from the new iPad(3) and re-installed to make sure the password was correctly set.
    4. Confirmed that the MiFi4510L unit was running the latest encryption software that the Apple iPad in fact supports. The Verizon security setting is WPA2 Personal/PSK (AES).
    5. Reset the MiFi4510L unit.
    6. Simultaneously power re-started the iPad and the MiFi4510L.
    The IPad(3) finds and marks the MiFi4510L in the network queue. It then toggles between connected and not connected every couple of seconds or so in the setting panel. One never encounters a check mark to indicate that there is a solid signal. The MiFi4510L “sees” the iPad3 (confirmed by a bottom dot.) It can handle as many as 5 “dots” simultaneously.
    I have tested the new iPad(3) with my home network, which runs on two bridged Apple Extreme routers connected to a Verizon FiOS base unit. It works fine. 
    So … Everything points to the conclusion that the iPad(3) has broken the connection to the MiFi4510L for some still unknown reason. Verizon is emphatic is its view that their unit is OK. If they are right it would mean that every buyer of the new iPad who attempts to connect wirelessly to the Internet through a MiFi4510L – and there would lots of them -- is going to encounter the same problem that I have encountered.

    ajglass wrote:
    The IPad(3) finds and marks the MiFi4510L in the network queue. It then toggles between connected and not connected every couple of seconds or so in the setting panel. One never encounters a check mark to indicate that there is a solid signal. The MiFi4510L “sees” the iPad3 (confirmed by a bottom dot.) It can handle as many as 5 “dots” simultaneously.
    I have tested the new iPad(3) with my home network, which runs on two bridged Apple Extreme routers connected to a Verizon FiOS base unit. It works fine. 
    So … Everything points to the conclusion that the iPad(3) has broken the connection to the MiFi4510L for some still unknown reason. Verizon is emphatic is its view that their unit is OK. If they are right it would mean that every buyer of the new iPad who attempts to connect wirelessly to the Internet through a MiFi4510L – and there would lots of them -- is going to encounter the same problem that I have encountered.
    I am having the same exact issue.  I just purchased the new ipad yesterday.  I can get the iPad to connect to my home Comcast network.  I can get my iPhone and computer to connect to the MiFi4510L but not the new iPad.  I know it works because my son's works on his MiFi4510L. 
    I've also "forgot the network" on the iPad.  Turned everything off and reinstalled the network after restarting both units.
    I called Verizon which said it's the iPad because I can get to the iPhone and my computer.  I then called Apple who said it's the Mifi because I can get on my home network. 
    Allansch, did you ever find the answer to the problem?  Anyone else have any ideas???? 
    I have an iHeadach!

  • Why does my ipad say not yet connected to itunes store? It wont let me download apps

    I'm a first time user. Tohis happens when i try to download an app it always says that its not yet connected to the itunes store. Help?! (the new ipad 3)

    1.5GB is basically full.  Your iPad needs an absolute minimum of 10% of its total space free, and maybe more.
    You can go to Settings > General > Usage and see the space hogs and do some cleaning based on what you see.

  • Why does iTunes say it is not connected to the internet when the connection is active?

    No problems running iTunes on Windows XP machine with Norton Internet Security.
    Moved to new computer with Windows 7 - still running Norton Internet Security.  iTunes does not start when iPhone4 is connected with USB cable.  Worse problem is that all internet activity (check for updates, activate this computer, etc.) is halted with message that computer is not connected to the internet... but it is.  All browser and email activity works right.
    Do I have a Windows 7 setting problem, a Norton Internet Security setting problem, an iTunes setting problem?
    Thanks in advance.

    For the device connectivey issues try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    I suspect Norton's firewall is blocking iTunes. I can't tell you offhand where to look to tweak things.
    tt2

  • Why does my ipad tell me to connect to itunes?

    My Ipad was working fine yesterday, but today, it won't actually turn on.  The screen shows the Itunes symbol, and arrow with a usb port as if it is telling me to sign into Itunes.  What is the deal???  How do I correct it enabling me to actually use my Ipad?
    Jennifer

    You need to connect to iTune (computer) to Restore/Recover your iPad.
    Note: Data will be lost if you have not backed up the iPad.

  • Why does my mac say "failed to connect to the device" when I try to print through airport express?

    So a little back ground.  I have a unibody 2 ghz core 2 duo running 10.5.8 and a mac book air running 10.7.5.  I set a airport express and added a new printer to both computers using bonjour.  My mac air has no problem connecting and printing but my unibody does.  The "failed to connect to device" message come up after I open print que for that printer and then utility.  It unibody sees the printer through bonjour and installs the printer but when asked to connect, nothing happens.  can anyone help please?

    If you updated from a previous version of OS X to 10.9 and had an older version of driver installed, then you can get this message. Sometimes a quick fix is to reset the printing system. Note that this action will remove all devices from the Printers & Scanners preference pane, but not the supporting drivers, so if you do have other printers or scanners on this Mac you will have to add them again.

  • Why does my iPad have yellow like spots on the screen when the screen is on dark images.?

    When I open dark images, my iPad has this yellow like spots around the screen next to the bezel.  It only happens when there is a dark screen like for instance when a YouTube video is loadeding or when I have dark pictures. Is this normal.? Or should I take it to the Apple Store.?

    first of all was your ipad dropped on a hard floor or something if not then you should just take it to apple as that is not normal you should probably get the device replaced

  • Why does my iPad tell me my airport network "cannot be set up by this software"

    why does my iPad tell me my airport network "cannot be set up by this software"?

    You likely have an older version of the AirPort router which is not supported by AirPort Utility for the iPad.
    Check the model number on the bottom....if you have an AirPort Extreme.....or check the model number on the side of the device......if you have an AirPort Express.
    Post back with that model number.

  • HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • TS1398 Why does my ipad keep saying poor connection on FaceTime ever since ios6

    Why does my ipad keep saying poor connection on FaceTime since we went on ios6

    I have the same problem with my ipad 2.. ever since i updated to ios 6 it says "connecting" and never connects..and then 5  mins later it says "connection lost" CALL BACK! its so frustrating as i have not had any issue before the update..
    both me and the end caller have updated to ios 6, so im afraid the above response doesnt work for me! Some one please help, as its driving me nuts to not able to facetime!

  • Why does my iPad tell me to contact iTunes support to complete transaction.

    Why does my iPad tell me to contact iTunes store to complete transaction?

    Contact itunes support and find out.

  • Cannot connect to itunes store when searching on ipad 2 after I updated it to IOS 6.0.1

    "Cannot connect to itunes store" when searching apps on my ipad 2 after it was undated to IOS 6.0.1.
    But the featured and updates work well.
    I tried to sign out and sign in, reconnect my wifi, and reboot my ipad as well...it doesn't work.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

Maybe you are looking for

  • Best Practive to resturn Resultset to a JSP page

    I'm writing a class to return a resultSet to use in a JSP page or at least i think thats what i want to do. Whats the best practice to return that resultset.....As the class is written below, when i try to iterate through the resultset in the jsp pag

  • SAP to Data Services System (Business Objects)

    Hi, Currently there is an RFC connection between Data Services and R/3 which exchange three idocs. Each idoc has an volume of 30k per day. As we are trying to introduce PI as central broker, will it be recommended to bring PI into the scope thinking

  • Developing SAP Reports Using Mass Data Runtime( MDR)?

    Hi Experts, Does anyone have the idea of MDR reporting? Actually i have implemented this in my previous project which is used for parallel processing. The problem which I am facing currently is that when i try to open the transaction /BTR/MDR it is t

  • Photo jpeg size is slightly reduced

    Hello, I recently downloaded a photo from a web on my laptop. The size of JPG file was 431,606 bytes. Then I downloaded the same photo on iPad and lately copied it on my laptop. I found out that the size of JPG file comming from iPad was slightly dif

  • Problem installing Imaq_usb_Installer

    Hi everyone, I am using Labview 8.5 and XP. I would like to install the Imaq_usb_installer on my computer. However I get this message when ever I try to : "You must have Vision 7.1 or higher with LabVIEW 7.0 or higher, or you must have Vision Assista