Why does my ipod not hold the battery charge
my ipod has to be plugged in to come on and most of the time it wont come on it will just bring on the apple start up logo and then shut back off it keeps repeating this action
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
i have a ipod touch and its not holding its charge I have charged it over night and then used it say for like an hour or two and the battery is drained .is there something I can do tohelp prolong the battery use.
Try to set it up "as new device" and don't use the latest backup afterwards. Check your setings as well: Apple - Batteries - iPod
If the problem persits, you may need a new battery. -
Why does my ipod not hold charge
I charge my ipod touch with a wall charger. After 30 mins it is dead again and I have to recharge it. Why is it doing this?
Sounds like the batttery needs to be replaced. I would make an appointment at the Genius Bar of an Apple store to confirm. Apple will replace the battery for $79. A third-party place like the following is less expensive. Google for more
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Why does my ipod not complete playing any song?
Why does my ipod not complete playing any song?
Do they play OK in iTunes on the computer?
How long to they play
Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.
The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
80Gb10 = 74.3Gb2
It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
tt2 -
TS1382 why does my ipod classic keep saying its charging and the back of it get hot
why does my ipod classic keep saying its charging and the back of it gets hot
The battery and/or charging circuit may be faulty. Reset the device and try again having let it cool down first.
tt2 -
Why is my calendar not holding the set color. I have reset the color of a particular calendar and within seconds it reverts back to purple. I am using ICloud on a calander linked to my IPhone and IPad.
set them at icloud.com on a computer. its a work around. Peace, Clyde
-
Why does my image not reach the edges of the page when printed, but appears fine as pdf?
Why does my image not reach the edges of the page when printed, but appears fine as pdf?
Check a printable area of your printer.
Make a (grey) rectangle that is larger than the paper size. Print it,
you'll get a message that some cropping will occur, that's okay. Then take a
ruler and measure the dimensions of the rectangle printed on the paper or
the white borders around the printed rectangle. -
TS1398 Why does my iPad2 not display the WiFi icon?
Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.
Try the following:
1. Reset the AirPlay devices
2. Reboot the router
3. Reboot the iPad
Note: The AirPlay icon is now in the Control Center -
Why does my ipod doesnt diplay the music screen shows blank only?
why does my ipod doesnt diplay the music screen shows blank only?
What do you mean by blank? The screen is all white? What have you tried so far in terms of troubleshooting?
B-rock -
hello?
What do you mean by works? Do you mean the battery chares on the computr but not with the wall charger?
Did the wall charger ever charge the iPod? -
Why does my ipod have on its screen the itunes symbol and the cord with an arrow pointing to the itunes symbol. I can't do anything with my ipod now!
Plug it into iTunes. If that does not work hold the power and home button untill the screen turns off then let go of the power button but KEEP holding the home button... this should bypass the connect to iTunes screen. Hope it helps.
-
Why does my ipod not charge with usb hub in wall outlet?
why does my ipod charge on my computer
not charge with usb hub in wall outlet?Because the hub is not compatible with the iPod.
Just use your computer or purchase a wall charger. -
I need help why does my ipod keep saying connect to itunes,I have already restored it 7 times what to do now.HELP ME!
If the restores were successful, that is completed all steps without errors then:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
When charging from a wall socket with a mac recommended charger, the battery icon in the top right hand corner does not show the flash sign and the running battery level is also not shown . Is this the normal situation?
Hi,
so when you hold the menu+select buttons it won't reset - show the apple logo?
If you can get the apple logo to show, then press the select and play buttons to put it into disk mode.
What happens when you connect it to the computer? Sometimes, you can see the ipod in disk management if you open itunes before connecting the ipod. Once itunes is open, select Edit/preferences. This will keep itunes busy so that you can read the ipod in disk managment.
Maybe you are looking for
-
Cant open apps/icons on my macbook pro
For some reason, i am unable to open my app store, imessage, facetime, and a couple other apps on my macbook pro. Any suggestions?
-
Adding custom (z) fields to assignment blocks...
We are running SAP CRM 7.0. We are using the opportunity module as well as "Create Follow Up" (Sales Order / Quotation) so that you have a one to many relationship (1 opportunity may contain many sales orders). I have 2 custom fields inside the Sales
-
PLD-How to increments rows of accounts in O/g payment.
Dear friends, 1) In outgoing payment PLD.I have made NOT visible as Repeatative area Header0 ,and Repeatative area0. 2)Now if i will make Outgoing payment checkon ACCOUNT,for that if i am designing PLD.So taken Account code,account name from VPM4 tab
-
E4200 Bridged Mode - Wireless and Management fail after 36 hours
Greetings all, I am trying to see if anybody else is having this problem. I have the E4200 and have it configured in bridged mode. Once configured, everything works great for 36 hours. After 36 hours, all wireless devices are unable to pull an IP a
-
R Program for testing the read of a (UNIX) Directory?
I think it starts with an R - Or any other pro0gram will work. Thanks.