Why does my printer jam?

I need 2 find out if there is a warranty on my printer

Hi ToreyMo,
I am not sure of your printer model, what is the printer jam issue and which country you are located.
I understand all printers come with one year warranty. When you have purchased the unit, did the reseller informed you of the service support and warranty period or if there is a warranty card comes with the printer? If you want to contact the reseller to check it out? Or you can call the HP support center too.
Hi, I am a HP employee. I am speaking for myself.

Similar Messages

  • Why does my printe say "used supply in use/:

    why does my printer say used supply in use?  And I can't print anything

    Pretty sure its to make sure you don't get good use out of your cartridges... basically this company trying to get 10 cents a print out of you
    After 1100 prints, regardless of how much ink used, if you take it out (the genuine 85a) at this point and put it back in, say after a jam or you want to shake it, it tells you have a used cartridge, i have tested continually using this, and got 500 more prints, with an annoying nag that you cant stop from every page printed. you have to take it out because this printer is notorious for a section ink don't get too, even though there probably is over 50% of ink left in it.. you take it out and shake it and can print, hundreds and hundreds of more pages... but after the 1100 point mark, since the printer tracks statistics it goes into this "used mode" so averages of prints won't go up... im pretty sure its devious code... but what do i know.. i just wont be getting new HP printers.. they claim it can cause damage.... the heads are on the toner cartridge... if its damaged the cartridge is replaced and thats that... so their warnigs are smoke and mirrors..

  • Why does my printer automatically go to send a fax when I just want to print?

    Why does my printer automatically go to send a fax when I just want to print?
    This question was solved.
    View Solution.

    Hi pa_tom,
    In your printers folder on your computer, is the default printer set to your printer, or your printer- fax?
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Why does ical print out starting tuesday?

    Why does ical print out staring the week on tuesday?
    Maybe the week starts one day later for the Yosemite dev team, but certainly not in my neck of the woods.
    The actual print out also looks nothing like the new matt and  'flat' graphic style of Yosemite.
    I suggest you start on monday next week and sort these issues out.
    Sunny

    For many people that is the correct option. If you think it should be different, tell Apple, as they aren't listening here.

  • Why does my printe say "used supply in use" 1217nfw

    Why does my printe say "used supply in use" model m1217nfw

    Hello,
    The "Used Supply in Use" means that the printer believes the toner cartridges installed in the printer have been previously used in another printer.
    Have you recently changed the toner cartridge on this printer? Are you having issues printing?
    Remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
    I really appreciate it!
    You should be able to still print without problems even though the message comes up.
    THX

  • Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

    Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

    What's the full model number and name of the printer?  I can't seem to find any HP printer with the numbers 3080 in the model number.
    How are you connecting the printer to the Mac?
    I am a printer tech for HP.

  • Why does my printer not warn me when my ink is low?

    Why  does my printer not warn  me when my ink is low?
    Before when I used HP control Center it warned me my ink was getting low. Since I instaled HP Conected I no longer get that message."My printer is a HP Deskjet 3050A J611series" 

    are you used original ink from hp ? 

  • Why does my printer say "offline" sometimes and won't print?

    Why does my printer say "offline" sometimes and won't print?

    Hi - Try following the steps in this document.  It should help resolve the issue.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Why does the printer suddenly not recognise the computer

    why does the printer suddenly not recognise the computer

    salkenward
    Welcome to the HP Community Forum.
    This issue is frequently caused by a driver malfunction although the problem could be just about anything.
    You didn't provide any information.
    The good news:  You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
    Install Full Feature Software – Printer
    Take a look at the helpful videos if you need help with the installation.
    Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
    There is a new "Print Doctor" in town for many printer models.  If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Why does my printer shwos install black cartridge. already loaded.

    Why does my hp Laser Jet M1213nf MFP printer display showing as INSTALL BLACK CARTRIDGE.   It is already loaded. just accuring this problem.  I have turned off and turned on 2 or more times but it not rectify..  can you please solve dis problem..
    This question was solved.
    View Solution.

    It is possible that the toner cartridge still has some packaging on it or that it isn't fully secured in place.  I would try completely removing the toner cartridge from the printer and taking a look at the steps in the document found here.  The document has steps to troubleshoot when an 'Install Black Cartridge' error is present on the display.
    Let me know how it goes.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Why does my printer loss connection

    Why does my my printer loss conection from my time capsule at least 3 times a day?

    Hey Linders1987,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with Wi-Fi on your iPhone 5. The following resource may provide a solution:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    http://support.apple.com/en-us/TS1398
    Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including
    - previously connected Wi-Fi networks and passwords
    - recently used Bluetooth accessories
    - VPN and APN settings
    Thanks,
    Matt M.

  • Why does 3522 prints only in black and white not in color

    my 3522 hp printer will print only in black not in color.i have new color carttridges #564 and the black is not low.any help would be appreciated.

    The troubleshooting steps in the document here may help resolve color not printing on your Deskjet 3522.   If this does not resolve the issues please provide some further details - what is the operating system on your computer?  Does the printer make color copies properly?

  • Why does my printer not work?

    My HP Printer says it's connected but it does not Print.

    Hello, try this...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Why does my printer print in colour inks but not in black even though a black cartridge is installed

    I have a Photosmart Wireless series B109n installed on Windows 7
    The printer functions OK but I cannot print Black ink copies but all is well with colour copies.
    When I go to print a page with both black and colour it does not print the black ink segment.
    I have removed the software and reinstalled it, I have disconnected the printer from my
    computer and reconnected it but to no avail.
    Any answers please.
    Doug.

    Hi - I couldn't find anything on the b109n, but try following the steps in this document for the b209.  It may be a simple as it being out of black ink or there being a problem with the black ink cartridge.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Why does my printer icon no longer show on topleft?

    The printer icon used to be at top left . There is a printer icon on bottom right but clicking on it does not get my printer printing.

    The default Firefox toolbar layout doesn't show a Print button, either top or bottom. See if this helps you.
    https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars

Maybe you are looking for

  • How to share a hard drive to a ipad

    Hi looking for a little help and i think i can find it here . So i have a new ipad mini 16gb black 2 months old I love it exsept for the 16gb. I have alot of photos and i would like to put them on my ipad but to much . I was thinking could I could us

  • MULTILEVEL REORT FOR STOCK TRANSPORT PURCHASE ORDER

    Hi, I will have lot of stock transport purchase orders,like md4c transaction where we get multilevel report for sale order/production order,is there any report for stock transport purchase orders.its urgent kindly help

  • "relink" problem in InDesign CS4: links are updated automatically

    Hi folks, we use a script to relink our InDesign documents when the links have been moved on the file system. Inside the script we just call link.relink(...) but not link.update(). We experience a different behavior between CS3 and CS4 after the scri

  • Content URL for specifying new Portlet

    Hello,           For some reason I don't have access to personalization newsgroup from my           news server, so I post my question here, hoping somebody who uses Weblogic's           Portal will be able to answer.           I am trying to pass pa

  • Keeping menu change after release

    Hi, I did the tutorial for an advanced website: http://www.flashvault.net/default.asp?ID=21 and applied it to my own design. However, I would like to make the following change: when a certain page is loaded (home, about me, contacts), I want the menu