Why does SHDB stop the recording when "Save" is done in VA01 ?

Hi,
Here is my problem:
- When I run VA01 manually and save my sales order, the transaction does not exit: I can see the sales order number in the status bar and continue to work in the same screen.
- When I do the same with transaction SHDB (transaction recorder), VA01 exits just after Save and the recording stops.
I tried to play with the different options of SHDB but nothing worked so far.
Does anyone have an explanation, or better, a solution ?
Thanks in advance !

Normally, you run your recording in a loop, so you want to exit the transaction when an order is saved so that you can go on with the next one.
Rob

Similar Messages

  • I have recently upgraded to a smart phone. Samsung Galaxy 3s. Why does it loose the signal when I am inside a building? It is suppose to be 4G!?

    Whys does my Samsung Galaxy 3s loose reception inside a building? I can get updates from running apps but not so good on phone calls or texts.

    Building materials will degrade radio signals and in many cases kill them altogether. It's called attenuation This is true with cell, AM/FM Radio, Tv signals. Signals aren't magic. Especially if a building is surrounded by metal and concrete. Especially metal. A building with a metal roof is a signal killer.
    Also calls and texts do not use the 4G signals. They use 1x. Version's 4G uses a lower frequency than 1x thus it is better able to handle going through buildings.

  • Why does firefox stop loading then when i close it and try to open it up again I keep getting this message:Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system

    Firefox will just stop loading/ connecting to the internet. The gray circle will just continually move but it never turns green to load the pages. I know it's not my internet because my internet explorer works just fine while this is happening to firefox. So I close firefox and then try to re open it but I get the message: Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. So I wait a little bit then try and re open it and still get the same message. I then go into my windows task manager and try and end the firefox proccess but it won't end. So I restart my computer and firefox eventually starts acting up again.

    For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].

  • Why does laptop stop the audio for a few seconds when I play a video then resume for the video?

    Hi I have a HP Pavilion G6 2288-ca with amd a10 vision processor. So I was playing some videos from youtube and the audio stoped and resumed a few seconds after.

    Flash is required for YouTube content.
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Now try a video.

  • Why does Safari refresh the page when using the back button?

    Safari didn't use to do this.
    Even on these forums, when you hit the back button to go back exactly where you were at, if there are new posts, the entire page may have changed. I knew exactly the next post I wanted to look at before the page was refreshed. Now, I can't even find the post I wanted to read unless I scroll through the entire list again.
    I need to be able to go back to the page I was just on and not have it refresh.
    I need to go back exactly where I was.
    Safari can't even go back properly as it wants to go back near the top of the last page I was on.
    I need it to go back exactly where I was at.
    I have no idea what the engineers are thinking about this one.
    FireFox works properly when going back to the prior page.
    I have long lists on pages I work with.
    For example:
    1. through 1,000.
    If I am on reference number 500 on the previous page, when I hit back, it goes all the way back up to around 20 in the list.
    I have to then scroll manually page down to 500 where I was at.
    This is tedious, cumbersome and unnessesary.
    Safari was much better before it was updated to this horrible behavior.
    I don't know of any preferences you can change to change this odd behavior.
    Anyone know of anyway to stop this horrible behavior in Safari?
    This is like reading a book, but when you go back a page, the entire page may have changed and I have no idea where I was at.
    Pretty $iss poor in my opinion.

    Yes, that is correct.
    However, you can also use the mouse or trackpad to swipe back a page and it still refreshes the last page.
    Safari never did this back in Snow Leopard and maybe some versions of Safari in Lion.
    However, Safari in Mountain Lion always does this.
    It is very cumbersome using the "open link in new window" or "open link in new tab".
    It was much better just being able to click the back button or swiping to get back exactly where you were on the prior page.
    Hopefully more people will send Apple feedback on this.
    Thanks for sharing.

  • Why does Quickview stop showing previews when I scan through a folder of .eps files?

    I have an Adobe Illustrator folder with a bunch of my .eps files that I browse through, and after about 20 or 30 files the quickview preview stops showing me the artwork and shows the generic eps image.  Is this a limited feature or is something wrong here?
    Any advice, help. or

    Try downloading this: http://www.eternalstorms.at/utilities/epsqlplg/
    You place it in ~/Library/QuickLook
    Source.

  • Why does notes remove the cursor when it updates

    Hello Everyone,
    I just downloaded the new Mountain Lion OS and I was excited about the syncing capability of the notes and reminders.  After some effort I was able to get the notes to sync on my mac book and my Iphone.  The problem is that after typing one work the bar at the top says updating, and it removes the cursor from the notes writing area.  I have to click to get the cursor to appear again and then continue typing my note.  This happens so frequently that it pretty much makes the app too annoying to use.  Has anyone else run into this issue?  Have any suggestions?
    Thanks,
    Scott

    Scott,
    Hopefully, it's just a transient problem with the iCloud account.  You might wait awhile and see if it goes away.
    If it does persist, you might want to get in touch with iCloud support to see if they can shed any light on what the problem might be.  To me it seems like the problem is on their end, not yours.
    http://www.apple.com/support/icloud/contact/
    Matt

  • When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag?

    When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag? Additionally, the software I record experiences terrible lag times. For instance, It may take 15 seconds to display a 2-digit number I typed into a blank field. the same software has no lag issues when I'm not recording it.

    Yes and no. The CPTX file is on my PC. Our software that I'm making the demo of is on the network. but I'm not the "IT Guy" so I can't provide specifics; however, I work at a computer software company and we probably have more servers than employees. The network hardware is kept current. I've been making similar tutorials for 10 years and haven't run into this issue until switching to the subscription Captivate.

  • Why is it when I use light leaks in after effects why does it stop When I'm in the middle of a ram preview?

    Why is it when I use light leaks in after effects why does it stop when I'm in the middle of a ram preview? also any idea on how render as well and and how to increase ram?
    Please answer me back when you can
    tthanks

    FAQ: Why does RAM preview only play part of my composition?
    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest
    Mylenium

  • Why does an unknown error occur when I try to save a document as a word file?

    why does an unknown error occur when I try to save a document as a Word file?

    Hi Judy,
    Deleting the Preferences files seems to be missing from your list.
    Quit AppleWorks,
    In the Finder, go to:
    username > Library > Preferences
    In the Preferences folder:
    Locate and Delete the File com.apple.appleworks.plist
    Locate and Open the Folder AppleWorks
    In the AppleWorks folder, delete the following files:
    AppleWorks 6 Assistants Cache
    AppleWorks 6 Preferences
    AppleWorks 6 Translators Cache
    Optional:
    AppleWorks Button Bars
    This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
    Regards,
    Barry

  • Why does pandora stop playing when i unlock my phone

    Why does pandora stop playing when i unlock my phone?

    Hello wayne1722
    If you are having issues with the Pandora app, check out the article for troubleshooting the issue.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Why does iMovie stop importing my tape from the camcorder even though it says it is still importing?

    Why does iMovie stop importing my tape from the camcorder even though it says it is still importing?

    It's difficult to be sure without doing some network packet sniffing, but if it were another app syncing, it would be an awful coincidence, since it seems to happen only while I'm in Reminders.app -- as soon as I click the home button and go back to the home screen, it stops; when I launch Reminders again, it starts again.
    Moreover, it happens when I am not in the house, which rules out iTunes syncing.
    Note that it's not the syncing spinner (i.e. two arrows chasing each other in a circle) -- it's the data access spinner (like the wait spinner in many apps and the apple.com search box).

  • Why does audio stop when pavilion 23xi sleeps (using Windows 8)

    why does audio stop when pavilion 23xi sleeps (using Windows 8)?

    Hello again @st3lla,
    I can understand the fear of messing up a computer when I first started seriously working on computers back in the early 90's I had to format and re-install my operating system twice a day for quite a while before I figured out a very important step (at least important for me), and that was after I made a change to my computer to restart it. This way if I messed something up I only had to undo one thing and not 50 because I went wild on it. lol
    Anyways, do not be afraid of your computer all you need to do is learn that step, how to keep your personal items backed up and then of course how to re-install your computer back to factory and you can always start over with a fresh build.
    On to your questions:
    Q - What are the steps to ensure that all HP updates are done.
    A - Simply review the HP Support document: Using HP Support Assistant (Windows 8) and it will guide you through the process.
    Q - What are the steps to ensure that all Windows updates are done?
    A - Simply review the Microsoft Support document: Windows Update: Frequently Asked Questions and again you will find answers to this question. (***Note: Do not worry if the document refers to Windows 8.1 it is only an upgraded version of Windows 8 and the steps are the same)
    I am also including a Windows Support document: Install the latest Windows 8.1 Update, which will guide you through how to install the Windows 8.1 update on your computer.
    And finally, to put your mind at ease I am providing you with two important HP Support documents: Backing Up Your Files (Windows 8), and Performing an HP System Recovery (Windows 8), which will provide you with all the instructions you need to backup your personal files so you do not loose them if you ever do mess up the computer, as well as provide you with instructions on how to put your computer back to how it came from the factory.
    Please re-post if you require additional support. Thank you once again for your post on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Why does Itunes stop working when I start to play a movie

    Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • When I change size of icons or icon vs list display, why does it affect the whole computer?

    When I change size of icons, or icon vs list display, why does it affect the whole computer? In some folders I want to see a list and others I want to see an icon and I don't need a large icon in all folders. I used to be able to set each folder separately in the old OS. How do I fix this?

    I can hilight an item, go to the finder/file/getinfo but there is no box next to icon view.
    I can go to view/options and adjust the icon size etc, but this applies to every folder in the whole computer. I need varied options in different folders, i.e., I want to view images as icons and text as text. I have to change it every time I open a folder. I used to be able to set it per folder in the old OS.

Maybe you are looking for