Why doesn't 'groups' list all the groups I'm in

When I create a new group and add myself to that group as superuser, command 'groups' doesn't list that group among others. It lists just those that I've been initially in (when creating my user via 'adduser'). Example:
# groupadd [group]
# gpasswd -a [user] [group] /OR/ usermod -G [group] [user]
# exit
$ groups
The group and only this group is visible if I do this (besides uid, gid and groups values):
# id [user]

and ...
using the usermod-command, you need the -a option, ie
usermod -a -G {group} {user}
Otherwise you will only have the given {group} in addition to your default group.

Similar Messages

How to print/list all the groups/users present in Weblogic using Java code

Hi,
Weblogic version : 11.1.1.5
How to print/list all the groups/users present in Weblogic using Java code
I want to make a remote connection to Weblogic server and print all the users/groups present in it.
I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
Thanks in advance,
Edited by: 984107 on 05-Feb-2013 05:26
Edited by: 984107 on 05-Feb-2013 22:59

see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
Hope this helps.

Why can't I see all the texts in a group text?

Why can't I see all the texts in a group text? I see some of the conversation, but not all.

In all honesty, iOS doesn't do group messaging very well. If people have non-iPhones, you may not see their replies, they may get gibberish. If you do a lot of group messaging with the same people, it might be worth switching to a dedicatated app such as GroupMe.
Best of luck.

Can we list all the users or groups with there rights on the universe\s

Can we list all the users or groups with there rights on the universe\s using query builder.
Can we do the same by using auditor reports.
PLZ help

Thanks ,
It can be acihived by using secuirty viewer.
Thanks again

Read all the groups and the OU's into my code

dears
i want to read all the group names that are under a certain Organization Unit into my code
how to achevie this
for example
a as string []
a = readAllGroups()
Help please?!

I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
I've solved it in the following manner(s):
1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
3) Perform any software updates
I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
Enjoy.

Why doesn't Apple list the changes in iPhone updates?

Why doesn't Apple list the changes included with each iteration of iPhone updates? They always post a detailed list of changes for all other major software updates. I wonder why the same is not true for the iPhone, leaving us all guessing and wondering...

Just to add, Ansuz82 pointed out, Apple's track record is that they don't really ever give full published details about what their updates include in any of their products really. If the iPhone is your first product by Apple you may not be aware of this. To them, saying Bug Fixes is enough. If they publicly add more info, it means they really wanted to get that point out. eg: the 1.1.1 mainly just talked about iTunes WiFi store. 1.1.2 mainly talked about the Tiff exploit fixed and keyboard updates for languages. However, with all, a lot more does get changed than just the key points mentioned. And by a lot, I don't mean a lot that you will see. Have to remember, they are still ironing out the OS for the iPhone. A lot of changes to them is just cleaning up and fixing known bugs that many of us as users may not even know exisit (though we see the outcome of them when apps colide and crash each other).
Message was edited by: DaVBMan

Same user with administrative rights on all the servers in single domain versus domainadmin as a part of administrator group in all the servers

same user with administrative rights on all the servers in single domain user as a part of administrator group in all the servers:
same user is configured as administrator on all the servers in one domain at windows 2003 server. Should this user be made part of domain admin and then this can be set up in the group of administrator for all the servers.
How this is technically different?
If same user is set up as an administrator on all the servers in domain, will it have the same access on all the files as a domain admin user?
dhomya

If the account is not admin on the domaincontrollers and the account is not member of domain admins or any other privileged AD group, the account has only user privileges on AD and thus cannot perform actions like creating and managing accounts,
groups, OUs,policies, sites, ...in other words cannot potentially ruin Active Directory.
I think that is a pretty big difference.
In fact, it is bad practice to perform you daily server management with an AD privileged account.
In regards of file access. The domain administrator will be just an admin, and thus has the privilies assigned to the local admin group, just as any other admin. But if it are different accounts they might be member of different groups assigning different
privileges. Always be carefull when assuming resulting privileges will be the same.
MCP/MCSA/MCTS/MCITP

E72: How am i able to view all the groups in my co...

I have 6 contacts groups and i hope to be able to view all of them in one place instead of the groups being presented like the contacts themselves. I own a 6760 previously and there is a groups view where i can see all the groups in one place but i can't seem to find that option in E72, or does the E72 don't have that option? Many thanks for any advice...

No, not cut off on every button...just the ones with a lot of text. Example...one button is labeled..."The Smiths - Stop Me If You Heard This Before." The end of this button (on the right side) gets cut off. I am using the "Full Frame '05" theme.
An interesting note...I went back to look at my chapter titles in iMovie and they were cut off there too. So, maybe it is taking the titles as they appear in iMovie and that's where they are getting cut off and not in iDVD. Are chapter titles in iMovie limited to a certain amount of characters?

I see an "archive" group listed in the ibook catagories section. How do i put the books that I've read into that catagory?

I see an "archive" group listed in the ibook catagories section. How do i put the books that I've read into that catagory?

Are you sure that you are not talking about the Kindle App? I might be missing it, but I don't see an Archive section in iBooks categories.
You can create a section for the books that you have read in collections in the iBooks app.
Tap on Collections, tap New - name it Archived if that is what you want to call it. Tap Done, then tap the bookshelf anywhere. Tap the Edit button, tap the books that you want to move to Archved - tap Move in the upper left and select Archived.

Why doesn't iMessage show when the message is read, all the time?

Why doesn't iMessage show when the message is read, all the time?

It depends on the recipients settings, whether they have read receipts set to on or off. If they have it off, you will not be notified of the actual time they read your message.

Why can't iTunes find all the album artwork?

Why can't iTunes find all the album artwork?

That would fall under Browsing History. Firefox > History -> Show All History
Firefox doesn't use Temporary Internet Files for anything except Windows Media files.
Type '''about:cache''' in the URL bar and hit Enter. <br />
Disk cache device = List Cache entries

How to list all the Fields for an Active Directory Object

How do I list all the fields that an Active Directory object contains? I know the most common ones, but would like to enumerate through all the fields and obtain the type of fields and their values...

Here is my complete code - I only put snippets so that the post was not too huge...
Option Explicit
Const ADS_SCOPE_SUBTREE = 2
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim adoCommand, adoConnection, adoRecordSet
Dim dtmDate, dtmValue
Dim j
Dim lngBias, lngBiasKey, lngHigh, lngLow, lngValue
Dim objADObject, objClass, objDate, objFile, objFSO, objRootDSE, objShell
Dim pathToScript
Dim strAdsPath, strConfig, strDNSDomain, strHex, strItem, strProperty, strValue
Dim strFilter, strQuery
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Wscript.Shell")
pathToScript = objShell.CurrentDirectory
Set objFile = objFSO.CreateTextFile(pathToScript & "\TestAD.csv")
' Determine Time Zone bias in local registry.
' This bias changes with Daylight Savings Time.
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\TimeZoneInformation\ActiveTimeBias")
If (UCase(TypeName(lngBiasKey)) = "LONG") Then
lngBias = lngBiasKey
ElseIf (UCase(TypeName(lngBiasKey)) = "VARIANT()") Then
lngBias = 0
For j = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(j) * 256^j)
Next
End If
' Determine configuration context and DNS domain from RootDSE object.
Set objRootDSE = GetObject("LDAP://RootDSE")
strConfig = objRootDSE.Get("configurationNamingContext")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
Set adoCommand = CreateObject("ADODB.Command")
Set adoConnection = CreateObject("ADODB.Connection")
adoConnection.Provider = "ADsDSOObject"
adoConnection.Open "Active Directory Provider"
adoCommand.ActiveConnection = adoConnection
adoCommand.CommandText = "SELECT * FROM 'LDAP://" & strDNSDomain & "'WHERE objectClass=user'"
adoCommand.Properties("Page Size") = 1000
adoCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
Set adoRecordSet = adoCommand.Execute
Set adoRecordSet = adoCommand.Execute
adoRecordSet.MoveFirst
Do Until adoRecordSet.EOF
strAdsPath = adoRecordSet.Fields("ADsPath").Value
' Bind to Active Directory object specified.
Set objADObject = GetObject(strAdsPath)
Set objClass = GetObject(objADObject.Schema)
' Write which object is grabbed from AD
objFile.Write(Replace(strAdsPath, ",", ";;;"))
' Enumerate mandatory object properties.
For Each strProperty In objClass.MandatoryProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Or (TypeName(strValue) = "Long") Or (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & FormatNumber(lngValue, 0))
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty)
End If
On Error GoTo 0
End If
End If
Next
' Enumerate optional object properties.
For Each strProperty In objClass.OptionalProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Long") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & lngValue)
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty & "||| ")
End If
On Error GoTo 0
End If
End If
Next
objFile.WriteLine("")
adoRecordSet.MoveNext
Loop
objFile.Close
' Function to convert OctetString (Byte Array) to a hex string.
Function OctetToHexStr(arrbytOctet)
Dim k
OctetToHexStr = ""
For k = 1 To Lenb(arrbytOctet)
OctetToHexStr = OctetToHexStr _
& Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)
Next
End Function
I have been able to obtain all the Computer, Contact, Group and OU objects without issue with this code...

Need to list all the reports in enterprise XIR1

Hi,
My requirement is to list all the reports available within folders their sub-folders?
For ex: Folder A has sub folder B->Sub folder B has another sub Folder C->in which the reports are available some thing like a two-level hierarchy.
Is this possible?
Thanks!!!

some sample queries for Query Builder:
Get a list of all WebIntelligence reports:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Webi' And SI_INSTANCE=0
Get a list of all Crystal Reports:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Report' And SI_INSTANCE=0
Get a list of all universes:
Select SI_ID, SI_NAME, SI_KIND From CI_APPOBJECTS where SI_KIND ='Universe'
Get list of All Users by log on ID and Full Name:
SELECT SI_ID, SI_NAME, SI_USERFULLNAME FROM CI_SYSTEMOBJECTS WHERE SI_PROGID='CrystalEnterprise.USER'
Get list of all groups:
Select SI_ID, SI_NAME from CI_SYSTEMOBJECTS Where SI_KIND='UserGroup'
get list of all folders:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Folder'
get list of all categories:
SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_KIND='Category'
get list of all personal categories:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_KIND='PersonalCategory'

Populating the user group instead of the group ID in MFA

Hello all,
I am trying to Populate the user group instead of the group ID in MFA. I want to use this to create authorization permissions, after authentication. I am running into the problem of not getting any info after authentication in the attribute dump. Are
there settings that I can change in order to Populate the attribute dump? are there settings that I can change to get all of the groups that each user is in?
Thanks,
Levi Williams
IT professonial
Intern

Hi Levi Williams,
Thanks for posting here!
Refer to the solution in this thread link:
https://social.msdn.microsoft.com/Forums/en-US/df060757-8190-4083-a162-0876cd4b8d15/group-based-radius-return-attributes?forum=windowsazureactiveauthentication
Additional reference:
http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
Hope this helps!
Regards,
Sadiqh

I recently got a used macbook pro, and the backlight on the keyboard doesn't light up all the way, I was wondering how much it would cost to get it fixed..

MacBook pro keyboard doesn't light up all the way, I don't know why and I was wondering how much it could cost for repairs.

If there is Warranty or AppleCare it will be covered at Apple Store. If no coverage, Apple does not repair iPhone 4 Power/Lock Button, for $149 they will give you a perfect replacement iPhone 4 exactly like yours with a 90 day Warranty. For the time being or as a permanent solution you can use perfect Virtual Lock Button. Tap Settings App > General > Accessibility > Assistive Touch > ON > tap the new small white screen button > Device > Lock. You can even use this button to turn the iPhone OFF. To turn iPhone ON, connect to power, ie charger or USB port of computer.

Why doesn't 'groups' list all the groups I'm in

Similar Messages

Maybe you are looking for