Why has my memory shrunk since updating software??????

I have just updated the software on my mini ipod and tried to update with a couple of tracks that i downloaded but ipod stated that there was not enough memory although it said that i was only upto 3.7gb of memory used. I have deleted 3 albums that i dont listen to and this was still not enough to fit 3 tracks onto ipod. I have since cleared my ipod and when totally empty it states that i only have 3.7gb available space whereas before it was updated it showed 3.9gb available space. Please help!!!!!!!

I probably am mistaken, but i am still confused as to why i have had to delete 3 albums off my ipod just to get 4 songs on it that i purchased from itunes since the software update. I have had to let itunes choose a selection of songs to add to ipod since update whereas before i could fit everything on!

Similar Messages

Problem Ejecting iPod Photo since updating software

Can anyone help with my problem ?
Just updated iTunes to 5.0.0.35. All seemed ok until I needed to update software on iPod (colour screen, 60gb) to 1.2 so I can use the camera connector I bought when I go on holiday.
Now I'm having serious problems. I've had the pod for a few months and it's been great until now.
I've been adding album art to iTunes albums. Now the pod with it's new software connects to itunes much slower and I seem to have lost songs from the pod. "Do Not Disconnect" message is continuously on pods screen. It won't disconnect from tunes and when I try to disconnect from PC using the safely remove hardware tactic, I get a box saying "The Device 'Apple iPod USB Device' cannot be stopped right now. Try stopping the device again later."
I've tried everything, from safely removing it to right clicking to eject. The iPod is still stuck on the DO NOT DISCONNECT screen. The only way was to disconnect it then restart the pod using menu/select buttons together. But when I connect it again to the PC, the same thing has happened. Again, I've tried all sorts, from rebooting the PC to changing some options in iTunes.
This all seems to be since I updated the software this morning (Sept 30). I've also tried resoring the iPod and starting all over again, but a soon as you connect it to the PC, it seems to freeze up with that same message on the screen. iPod Updater software said it "Couldn't Mount iPod connected".
Please put me out of my misery. Boo Hoo............

Cheers for that Mrsuknow,
Unfortunately I don't have an 'automatically disconnect' check box under my ipod tab, or anywhere else in preferences for that matter.
And the pod never finishes updating. It tries for a few minutes, then a message appears saying, Ipod couldn't be updated, file(s) not found. A load of exclamation marks appear next to certain songs in the iPod library. When I try to play any of them on the pod, they show as being there but won't play. They're still there on iTunes.
And I've tried restoring factory settings again on the pod, but updater says it can't mount the iPod again.
Boo.....

Since updated software YouTube videos won't play

Why won't iPad play you tube videos since I updated software and how do I fix it?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Wifi problems since updating software to iOS 6?

Just updated my iPhone with iOS 6 and having problems with wifi I have a netgear router it connects works for about 20 seconds and then I have no Internet this has resulted on me using 3G and now have a massive bill for Internet usage. How can I fix this? This isn't my only issue since updating the software but this wifi issue is my main concern. Many problems with iOS 6 I hope apple sort this rapid!

Just updated my iPhone with iOS 6 and having problems with wifi I have a netgear router it connects works for about 20 seconds and then I have no Internet this has resulted on me using 3G and now have a massive bill for Internet usage. How can I fix this? This isn't my only issue since updating the software but this wifi issue is my main concern. Many problems with iOS 6 I hope apple sort this rapid!

Why is there no sound since update?, Why is there no sound since update?

Since updating to 6.1.3 on my ipad 2 3g i don,t get any sound on any of my games whether they are online or offline games! I have tried e native music app and the sound works on that. Have ied powering off and on also. Is there a way i can downgrade back to previous software version or is there something elsemi could try? Ta peeps.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Why can I not see the update softwared tab in General?

I need to update my iPad 2 and there is no "Update Software" tab. Plus, I am unable to access itunes on the ipad. I have checked my wifi connection and it is fine.

Hi NISTeacher12,
Apple has been experiencing all kinds of problems the past 2 days with their iTunes Store and many of their other online services. If I was in your shoes, I'd first try a "reset" (different from restarting) by holding down both the Home button AND Sleep/Wake button for about 10 seconds until you see the Apple logo. Then check to see if you can connect to Apple's services.
Hope this helps!
~Joe

HT4623 my iphone has crashed & wont reboot since updating

my iphone has crashed & wont reboot since updating

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS2972 one apple tv unit has lost connection, I have updated software I thought it has been working since, the other apple tv are still working that unit keeps saying turn on home sharing.

I have 4 apple tv units 3 are working the one I am using in the cinema is not working.It keeps saying turn on home sharing.

READ the entire article from which this thread was posted and follow all the troubleshooting steps provided.

Xperia so-02c has a black screen since updating

Hello,
I agreed to an Android update from Sony on 08/18/2012. It told me I needed to charge my battery before the update, so I did (although not fully) everything progressed fine until my phone powered off. Since then it hasn't powered back on. This is the first update I’ve ever agreed to, needless to say if I’d thought this would happen I wouldn’t have agreed to Sony’s download.
Originally I could hold the power button down and the phone would still vibrate, but nothing else would happen. When I plugged it into the computer and then pressed the back button the green light would come on. I've re-updated the phone using PC companion, and Update Service. I have both the Update, and the Factory Reset + update options. Each time the software on my computer told me the update was successful. Now when I hold down the power button the LED will flash red three times, no matter how long I hold it there is no longer any vibration. I have also tried holding down the power/volume up (and down) buttons, but the screen continues to ignore me. The screen has never showed no signs of life since the update. When this whole things started the phone was low on memory. When I plug the phone into the charger it blinks red at a steady pace before turning a solid green; I have not seen any other colors than red or green from the LED since this all began. I have tried all of the above with the SD and SIM card in, one in and one out, vise versa and both out. I don’t know if the phone is unlocked; I’m assuming at this point that it’s bricked
It's a Japanese phone from Docomo but I've been using it in Canada without any problems. I’ve had no battery problems and the screen was functioning fine until all of this started. I bought the phone two months ago but I have no warranty.
I would certainly appreciate any help you can offer.

Try letting the phone charge for a couple of hours and then run the software repair option in PCC. If it doesn't help it needs to be examined at an repair center to get it fixed. Contact your local support team to check if they might be able to help you.
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

E-mail won't send since updating software

Since I updated the software on my iPhone yesterday (don't think it's a coincidence!) I can't send e-mails on my iPhone from my AOL account, although I've never had problems before. The message I get is "Cannot send mail - the sender address was invalid" I can receive e-mails ok.
Does anybody have any suggestions please?

You're welcome.
The error message provided is not accurate. This usually means the internet service provider (ISP) being used for your internet connection at the time is blocking the SMTP server. Most, if not all ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection at the time unless the SMTP server is authenticated. A cellular carrier's network is no exception.
I believe AOL has an authenticated SMTP server, so this shouldn't be a problem especially if it was working before unless something has changed recently in this regard which coincided with the firmware update. My email account (non-AOL account) has an authenticated SMTP, and I haven't experienced any problems sending with the account since installing the recent firmware update.
Are you also accessing your AOL account with an email client on your computer such as with Outlook or with Windows Mail? If so, any problems sending with the account with the email client used on your computer for accessing the account? Accessing/sending with the account via webmail access using a browser doesn't count since doing so does not use an SMTP server.
Just wondering if AOL is having a problem with their SMTP server.

Why has my computer slowed after updating with mavericks

i updated to mavericks .since i did this my computer has slowed and i am also getting problems with streaming can i revert back to mountain lion.

how much RAM do you have?
how full is your hard drive?
what apps are you trying to run when things are slow?
do you have any crapware installed, like
antivirus software
defragmenters
"cleaners"
"optimizers"
how long has it been since you updated? Spotlight may be updating, that can take a while, and things may be slow while it does.
Boot into your recovery partition (hold down ⌘R at restart until you see the Apple symbol), go to Disk Utility, and repair your hard drive. While you're there, repair permissions too. OSX Tips Using the Recovery HD
Try a safe boot (hold down shift and restart) : Mac OS X: What is Safe Boot, Safe Mode? . If this works, it means that the problem is with some third-party software you have installed.
Try a test user account: Isolating an issue by using another user account .
That is: if you want, we could try to fix what is wrong. Otherwise, you could certainly go back to ML if you want. How you would get there would depend on how your computer originally came, either with OS installer discs, or with the OS already installed. osx - Roll back from OS X Mavericks ( or any newer OS) to Mountain Lion - Ask Different

Ipad mini has frozen when trying to update software, saying connect to itunes but itunes won't allow update or a reset

help!
I clicked on the software update for my ipad mini.
I now have a screen that says I need to plug into i tunes.
When i did this itunes says that the ipad is in recovery mode and cannot be updated
i have tried to reset but it just keeps saying unable to do so and error 3194 has now started to appear

You can't update to iOS 7.1.1, you can only update to the current version i.e. 7.1.2
Error 3194 : Error 3194, Error 17, or "This device isn't eligible for the requested build"

Why has Verizon put out an update that is breaking most people's phones?!?!

This to me is unacceptable for a company the size of Verizon! I have many friends who have a Droid X as well and every one of them have had nothing but problems with their phone after installing the update.
Something needs to be done about this by Verizon!
Did they not test this update properly?
Why are we having to do factory resets and having to basically start all over because Verizon has failed us as a responsible service providor.
Once again this is totally unacceptable to me and something has to be done by Verizon ASAP so more people won't have half of their day ruined by having to wrestle their phone after trusting the update that they are offering.
Yet again another rediculas failure by Verizon.

Pool_shark i'll have to agree with ya on that one i think there's is alott Folks that installed Gingerbread right on Top of Fro-Yo an there issue's there having stims from this. Now i'm not saying they dont no what there doing or such i'm just saying they might be
alittle Mis-informed. if would'nt be for me discovering the forum this back in Oct. of last year i might be doing the same thing an puting on updates without doing a factorie resets an if it was.nt for you Pool ,an Cody , Wildman ,Geri , Demmo , Budone ,an Ann i
still might be lost on several things. But by reading an asking Qeustions has helped me Tramendously an i think if the folks that are having these issues would Do alittle researching as i did ask Questions as i Did an i think they'ed be further along an
wouldn't be so upset with there Phones But some has to Remember as much as we want them to be perfect that just is'nt going to happen they'll be close. Though.

Why do I lose signal since updating to iOS 5.1?

Hi,
Since I updated my iOS from 5.0.1 to 5.1, my iPhone:
1) Takes a lot more time finding the network when I turn it on.
2) Frequently loses reception and searches for network for 10-30 seconds before going back on the network full strength. The weird thing is that when this happens, I'm usually at the same place, so it does not make sense that I go from five bars of signal to nothing.
3) Also, when I lose signal, there is a prompt telling me that I lost signal. This prompt is annoying, is there a way to make it not appear?
Sifting through forums, I realized that I was not the only one having this issue. Is Apple aware of that problem? Is there anything I can do to resolve this issue?
Thank you

The signal on iPhone has been broken since the 5.0.1 update, some people got it as early as 5.0.1 while others have now seen it manifest itself with the later 5.1 update. So far Apple has not taken on it's resposibility to fix it, and will not likely look into it while the media keep quiet. There have been plenty of threads created on this support site but it looks like everything falls on deaf ears, sorry to inform you of this.
You will now also find that text messages may arrive very late, some will not arrive unless you power down the phone and turn it back on again... even if you did have a signal when the other person sent you that text message.

Error Out of memory message since update

In the middle of a project with five camera multicam edit and since an update Im getting intolerable out of memory messages. have 32gb of memory. How can I roll back the system to remove whatever the updates were? There were 4, and I'm not sure what they were, but didn't have this issue before. I've rebooted and still getting the same message. Driving me nuts as I'm editing for TV and it's time sensitive.

I know, I clicked on the update and realise that about 0.1 of a second later..... "mmm, shouldn't have done that". I now think it's not the updates as such. The problem appears to be when I try to adjust the time of one clip by 10 frames or so to match the other clips (Ctrl+shift to move a clip in time). When I do that it seems to cause the error. I've been getting that when I try and change the clip positions in the multicam view when there are 5 or 6 clips, so I've stopped doing it and just accept the positions in the viewer as they import. Tweaking individual clips seems to cause the same general error message. For the time being I'm re-editing it after changing the in point of the clip and starting again with a fresh set of clips as a new multicam edit. Not ideal but gets around the issue for now.
Thanks

Why has my memory shrunk since updating software??????

Similar Messages

Maybe you are looking for