Why iphone5 getting hot at the back when using wifi only?, Why iphone5 getting hot at the back when using wifi only?
Help
It all depends upon your configuration.
You should first determine in a case like this if your iPhone or other device has been assigned a valid DHCP address.
If you see a value like 169.x.x.x, you have not been assigned a valid DHCP address. This may occur for many reasons, most often because the DHCP server component of your router is not issuing them, or your device is not commmunicating with it. Valid DHCP addresses are generally in the ranges of…
• class A: 10.0.0.1 through 10.255.255.255
• class B: 172.16.0.1. through 172.31.255.255 and seldom used, and
• class C: 192.168.0.1 through 192.168.255.255
If you have a valid DHCP address, then the issue is likely that your router is not properly configured, in that it does not have valid DNS server addresses stored in its configuration files.
Generally, a router or gateway requires that you configure its assigned address, a valid subnet mask, and primary and secondary DNS servers. While you can use any valid DNS address for primary, secondary, tertiary and subsequent server entries, by convention, most technicians set the pair assigned by the internet service provider for your service area. In Eugene OR, for example, Comcast DNS addresses are set to…
• primary: 68.87.69.146 and
• secondary: 68.87.85.98
Check to see that your router or gateway configuration contains such information, as the result of being issued a valid DHCP address but not being able to identify a DNS server leads to the sort of issue outlined by the original poster.
You can easily determine if this is the case by querying a known site by its numeric address, rather than by its canonical name. If one takes you to the site but the other fails to do so, then you have the DNS issue I referred to.
Similar Messages
-
My iphone5 crashed Wed May 29 and I am not sure why.. I had to do a restore and have been trying to slowly get everything back on the phone... Yesterday June 6 it blacked out once and I don't have everything on the phone as before.... Is it damaged and should I try to get a new one?
Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.
It only seems to do this since an iphone download last year.......its driving me mad !See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
When associating a device with an Apple ID see the following regarding the 90 day limit. -
Why do I use my Ipod tiuch as a camera when lose precious photos of my granddaughter every time there is an operating system update? Even when I try to back up the ipod, I can't find the pics etc on my pc. It is very annoying and I am seriously considering selling my ipod because of this. No warning is given that photos will be lost. So very disappointed in aple, lost all my music last time, as well as my pics.
Yes, using the windows photo capture application is how you get photos taken with the iPod onto your pc. You should store them there, and organize them in folders.
Create one main photo folder. Inside that folder create additional folders to hold photos. Each folder will become an album on an iPod, iPad, or iPhone. Do not next any other folders inside the first album folder.
Then start iTunes on your pc and connect your iPod. Select your iPod in itunes and select the Photos tab that will be ps enter. You will most likely have first find your main photos folder. Ten select to sync all photos from your pc or select only those albums you want to have on your iPod. The click on Apply or Sync. That will copy the photos to your iPod.
If you should do something later to cause these albums to disappear from your iPod you can quickly copy them back by doing another sync. -
I deleted the playlists on my iPhone and when I now try to synchronize with my iTunes account to put the music back, nothing happens and I do not get the music back on my iPhone. Anyone who knows why that could be? Grateful for any suggestions!
I know it sounds weird, and that is the reason I posted my question. Because my case is not like all the ones I've found online and it's confusing. I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
My playlists "ARE" in my iphone 4s. They are still there even though they do not show up when I plug in to itunes in my computer.
When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes. I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes: Music, Movies, TV shows, books. That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS" but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone. Under "90's music" there are also other standard playlists that itunes automatically adds.
Does anyone else have this issue or know how to get around this. I am starting to think that I am going to have to recreate these lists on my computer -
I just bought iphone5s recently when I turn the phone on with touch ID. I get o flashing light on top left on da phone I wonder Why??
Unfrotunately, this sounds like a dead TC.
- also, the picture does NOT pick up the 2 airport expressess in the house that I used to extend the wirelass network on the previous TC
- there is no option to extend the wireless network
You need to reconfigure the Expresses to rejoin the TC's network via a factory reset. -
Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going back to my pics and getting it back.
Does anyone know why this keeps happening??Are you choosing it from one of these folders (in my screenshot) or you can also put that picture into the correct folder. The path is:
HD > Library > Desktop Pictures
If you add it to the folder manually, please restart your computer.
And yes, letting it sleep is a good idea, or else the startup disk will spin and the screen may suffer from image persistence if you leave a window or image parked in the same spot too long, so the screensave is a good idea. -
When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?
I ran into the same problem, I think that, If you tab on a song that is on your IPOD, and the song data is grayed-out, I think it means that the song is probably twice on your IPOD and that the iTunes directory can not edit THAT song data for two (or more) files @once. Check if this is the case, sinceI have the same problem,am looking for a way to have One and the same song in more playlists but only keep the song once on the IPOD.
-
Firefox will open and then "freeze" (Says Firefox not responding). Have to attempt to close from lower bar and then get message from Windows - options
1. close window now
2. windows will search for the reason
When I click on either option I have to wait "magically" Firefox will "pop" alive. May stay responsive for full session or may again "not respond" when I try to access another site.I have also found that unchecking the "Use hardware acceleration when available" option solves this issue. This option is in the Advanced section, under the General tab.
-
I use Google to search I click on the link and I get redirected to some other page I click on my back button and re click on the link and it will the allow me to go the link. it does this to me 40% of the time and I know the links that I'm click on a a known good link cause I used them before I just have not save them to my bookmarks
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Help Please!! my computer won't finish my update for my iphone and it says it needs to restore my iphone. I don't know why it is doing this? If I restore the phone with itunes it will wipe out all my media and contacts and I don't want to do that. But I can't use my phone it just shows a pic of a usb port plug in to a itunes note. Can anyone answer how I can get the iphone back to normal because I can't even use it.
Monday I ended up on the phone with Apple Support just to be sure I was doing the right thing and to check my back up info so I could be sure I didn't loose important data. They were very nice and helped me finish the process. When I told the tech that I couldn't download the new update and install from my iphone that is when I went to the computer and that's when I got this recovery mode thing on my phone. He told me there must have been a problem and that is why he thinks I couldn't down load it from the phone. I had to go to ITunes on my computer. Once we did the recovery we were able to check that I had a back up from the day before, so I didn't loose anything. He stayed with me til the process finished. I also found out I can prevent the auto sync for the future by setting the directions on that.
I am good now and my phone is operating fine, with the new update. Thank you all who commented back to me. -
I purchase iTunes Match. When I applied it to my iphone5, it erased my music library. Even when I restored my backup, the library was not there. I still have all of the music on my ipad2. I thought that iTunes Match would allow me to put my library of music on the new MacBook I purchased last week. What did I do wrong and how do I get the music onto my MacBook and back onto my iphone?
For iTunes Match to work, your music needs to be in your iTunes library on your computer.
Read this Recover your iTunes library from your iPod or iOS device
jim -
I'm running OS 10.6.8 on an imac from around 2011. I back up with Time Machine to an external hard drive that has about 500 GB. Until now, I've had no problemsm, or at least that's what I thought. But today I'm getting a message every hour saying "Time machine is unable to back up because the disk is full." It IS full, but Time Machine is supposed to delete the oldest backups when that happens, and keep deleting them in order.
Anyway, when I opened up my backup disk I discovered backups from February and most of March, nothing in April and nothing in May.
I'm a little freaked.
Does anybody know why that would happen and what to do about it?
Thanks in advance.Hello, I don't use TM, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine something not being covered there. -
Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I had removed a pop up ad from my email inbox page and tried to do the same to another one on the opposite side of the page. I think this ad was not a pop up but part of the inbox page. As I did to the pop up ad, I right clicked on it, and then clicked on 'View Page Info'. I then went to the 'Permissions' window where there were 7 categories, all with the 'use default' option checked. I unchecked all of them and checked 'Blocked' for all 7.
As soon as I closed the window, I was thrown out of my inbox and was sent back to the log-in page for my email. When I went to log back in, I was unable to. I am stuck on the log-in page and it won't let me access my inbox. I called RCN, my provider, who was able to get in right away. I then used my Internet Explorer browser and was able to get into my email inbox perfectly fine. The 'tech' at rcn said it has something to do with Mozilla and tried to get me to reset it but warned me that I will lose all settings. I am hesitant to do that and I would so appreciate you fine folks at Mozilla to tell me what happened and how to fix it.
Thank you.You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck? -
After FF 9 installed every little while I lose whatever page I am on and it goes to about blank. When I tried to reload my pages it just sits there. Yesterday I was about to uninstall it and it started working fine again. This morning it decided to stop again, I have uninstalled it, rebooted and reinstalled and it's still doing this.
I never had this problem with any of the other versions. It all started with FF 9. It downloaded itself after I told it ignore update. I am getting very flustered with this happening.
It acts like it has a mind of its own when it comes to when it is going to work for me or not. I need to fix this somehow. I even tried reinstalling 7 again and it did the same thing as 9 does now. I took it back off and put 9 back on since neither want to work properly.Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.
Maybe you are looking for
-
Problem with jsp and controller
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core"%> <%@ taglib prefix="fmt" uri="http://java.sun.com/jstl/fmt"%> <%@ taglib uri="http://www.springframework.org/tags" prefix="spring"%> <%@ page import='com.uk.nhs.training.data.ActivityMatrix'%
-
Best practice for ASA Active/Standby failover
Hi, I have configured a pair of Cisco ASA in Active/ Standby mode (see attached). What can be done to allow traffic to go from R1 to R2 via ASA2 when ASA1 inside or outside interface is down? Currently this happens only when ASA1 is down (shutdown).
-
Conversion Oracle data into query
Hi everyone, I've 1000 records in my table. Now i want to create the same table in another database. If i have script to create and insert all values, i can very easily execute it. How to generate script for the Oracle table which contains 1000 recor
-
hi wht is the fieldvalue of last entry in the bdc table ? is it '/11' or F11.
-
hi when i enter a material quantity in pr and if it is not match with material quantity with po order i should get a error message. i need badi method for this with explonation.