Why is my connection lost so often? WRV210 Router

I'm looking for support on why I'm always loosing my internet conection due to my WRV210 Router.
This is being used in a business, and it has the most up to date Firmware, I'm also using a spliter hub which was making things work better, but now it seems about every second day I have to unplug the router only and my connection is back...
Any ideas?

Hello Mr. Schlueter,
I am sorry to hear that you are experiencing issues with the Internet connection.
Let me share with you some steps that could help you with the troubleshooting of this issue.
First we are going to need to check the System performance.
System performance on a device gives the detailed information about the data packets received and sent on each of the LAN ports and on the wireless LAN. This article guides the users on how to check the system performance on WRVS4400N router.
Step 1. Click Status at the top of the general user interface.
Step 2. Click System Performance at the top of the general user interface.
The Internet/Wireless Table
• Name— This row indicates each activated network on the device up to its four capable networks. The internet column is for all activity outside of the network.
• Connection— This row indicates either Connected or Disconnected to indicate if the network is being used.
• Packets Received— This row indicates the amount of packets successfully received
• Packets Sent— This row indicates the amount of packets successfully sent.
• Bytes Received— This row indicates the amount of bytes received successfully.
• Bytes Sent— This row indicates the amount of bytes sent successfully.
• Error Packets Received— This row indicates the amount of error packets received.
• Drop Received Packets— This row indicates the amount of drop packets received.
If you see any kind of error or lack of connectivity I would recommend you get in contact with your ISP.
On the other hand if you would like to get a revision of your equipment I suggest you to contact our service phone line according to your country, and open a case.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Diego Rodriguez
Cisco network engineer
Thank you

Similar Messages

Why is wifi connection lost after sleep/wake mode?

I've had this iMac a little over a year and had not experienced this until a few days ago. Every time my computer comes out of sleep mode the wifi is no longer connected. I must turn it off wifi and turn it back on again to re-establish a connection. Any suggestions? Thx!

Hello tim290,
After reviewing your post, it sounds like after the computer wakes from sleep it does not connect to the internet. I would recommend that you read this article, it may be able to help the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus (-) sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

Hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. help???

hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. I'm really upset about lossing it, if anyone one knows how to fix the problem or another way of tracking my phone that would be great.

The iphone 5 can only be located if connected to a data or mobile network. If in Airplane mode or switched off, it can't be found.
Check this article for more info:
iCloud: Troubleshooting the Find My iPhone app

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi?

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi? My friend in Texas has tried to call my via FaceTime but for some reason, every time she does, it keeps saying "connection lost" when we both have full bars on our wifi. Keep in mind, I am from Nebraska so we have the same time zone and I have an iPod 4 while she has a iPhone of some sort but that shouldn't matter because I am still able to FaceTime my friend in California, which is two hours behind me. So, I guess I just want to know why I cannot reach my friend in Texas. Please, someone help me!
-Mukestina

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

Why won't dose my FaceTime keep saying connection lost if I am connected to the interent

Why dose my FaceTime keep saying connection lost if I am connected to the Internet?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Connection lost between Nokia 616 Car Kit and a No...

I recently upgraded from a Nokia 9300 to an E71, but retained my Nokia 616 Car Kit. The Nokia website confirms that the E71 and 616 are compatible. My E71 has been paired with the 616 and configured as User 1 in remote SIM mode. The E71 Bluetooth settings have been set up so that it will connect automatically, without asking authorisation every time.
The E71 connects to the car kit without a problem, when the car is started, but often looses the connection during the trip. The 616 will then display “Connection Lost”, followed by the request “Reconnect to User 1?”. Strangely the black “User 1” phone icon is still displayed in the top right-hand corner of the 616 display. When I push the Navi Wheel it attempts to reconnect, but every time it comes back with the message “User 1 Not Found”, despite the fact that the phone has not been moved and is still less than 1m from the 616 controller. I can only reconnect after the vehicle had been switched off and restarted, i.e. when the 616 reboots.
Why does it frequently loose connection? A number of times I have noticed that it looses connection when I drive through an area with no or a very weak cell phone signal. I don’t think the cell phone signal strength should have an effect on the Bluetooth connection between phone and car kit.
Why won’t it re-connect? I can’t stop and switch off the car every time the connection is lost!
Any help will be appreciated.

Hi, I have bought a car with this equipment and I have the same problem.
I tried following:
PAIRING:
- first from the phone discover Bluetooth accessories - it will find the N616
- enter the code to the phone
- N616 ask for the same code as you enter to the phone - enter it
After this, the phone is paired, but not connected.
CONNECTING:
- then set up Bluetooth in the phone as visible
- try connect (as user 1 or user 2) from N616 to the phone - you do not need to specify which phone has N616 to find - it will find your phone if it is visible (one step before)
- if everything is OK, your phone is connected
- you can access the menu, reset N616 to factory settings - but you need to make all steps again
This list works for me, any other steps not...

Connection lost after 2 songs have been played.

Everytime I play songs from my macbook to ATV2 it plays only 2 - 3 songs then it hangs. I just got 4 songs out of it. I have to disconnect my home share and re connect to start it again. Any ideas why this would be happening. I've browsed the forum to see that other people have this issue, but there is no answer as to what is causing it. Surely its not the router as I have a new router. ATV2 streams movies without any interruption so I dont get why it happens to songs through itunes.

netsurferdude2 wrote:
Hi all,
Lets start off with some info. I have a XP machine with a WRT310N router but the connection to the router from my computer is wired. I have other computers on the network(a wired XP work comp and a wireless vista laptop). I do have linksys Easylink Adviser but it is was to laggy and doesnt work half the time so I dont use it. My antivirus software is Panda Internet Security 2008.
My problem has only occurred twice but it has prevented me from trying to make a server again. I have been wanting to host a dedicated counter strike source server in steam for awhile.
I followed all the port forwarding directions. I get the static ip set up and I open the 27015 port for steam.
I will make a dedicated server and have a few people join and then I follow. Everything works perfectly for about 5 minutes and then my friends are dropped from the server due to loss of connection. I am still in the server but no one can join or even get info on it meaning the server is not responding.
I then close out of steam and the server and find I have lost my internet connection. I can not visit any websites, I can not do anything in steam, I cant log onto aim, xfire or anything.
Now my local connections dont say "Connection lost" like they do when the router is shut off or if I lose the actual connection.
The only way it seems I can get my connection back is by unplugging the router, waiting 20s and plugging it back in. Then I have to wait about 5 more mins and it will just all of a sudden work.
Does anyone have an idea of what is happening? Is it the router? My antivirus/firewall?
Thanks in advance
Greg
Message Edited by netsurferdude2 on 08-25-2008 09:26 PM
Hi
Try disabling the firewalls and access server side.
see if any change?
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

ARC3: RFS network connection lost at host 'stdbhost'

Hi there,
having oracle 8.1.7.4 64 bit on Aix 4.3.3 replicating on a twin machine.
While archiving many logs within few minutes i'm having this error:
ARC3: RFS network connection lost at host 'stdbhost'
ARC3: Error 3113 creating standby archivelog file at host 'STDBIDIP.IDI.IT'
ARC3: Error 3113 creating archivelog file 'stdbhost'
Then after few seconds it retries and succeded. My clause in the primary db is:
SERVICE=stdbhost OPTIONAL REOPEN=180
The problem is that sometimes it does not succeed so i loose some archives and there's a gap sequence. Unfortunately i loose some archives that after the backup of the primary are deleted so i can't apply get them. The only way is to restore those files. But i can't every time do this!
My database was replicating from about two months without problems. Then we activate it for test and now i rebuilt it but now having problems i mentioned above.
I have followed the same procedure.
I was guessing why i'm getting that error. How can it be solved? I see that on the primary site sometimes more than one archive processes are activated. I was wondering if on the standby site on rfs process was enough to handle all archives arriving at the same time. If not is it possible to activate more rfs'?Long postings are being truncated to ~1 kB at this time.

I am willing to bet it is not linksys. Most likely it is your service provider blocking p2p.
This is a major battle with service providers. If you do some research on this you will see what I am talking about.

Satellite M70: WLAN connection lost

Hello!
I have Satellite M70 and I use integrated Intel WLAN card 2200bg. I have the latest drivers downloaded from Toshiba web site and Asus WLAN router w520g with latest firmware. Connection signal is excellent but sometimes actually very often connection is lost for 5-10 seconds.... I am downloading files all the time so there is no idle time in network traffic.
How can I inspect what is reason for losting connection?
Could authentication method or channel mode be a reason for problems?

Hi!
I updated my driver(latest one from intel website) and problem still exists. But now with Intel Wireless utility I can see error messages when connection goes down. I also opened support case to Intel about this problem. Let's see what they suggest.
I have also tested different kind of variations of configurations (power settings etc.) but no helps!
Now I am testing WLAN connection without authentication and it seems to work ok without connection lost. I will test different kind of authentication methods because i really want to see what authentication causes problems.
One thing I can say more. If I want to see connection break as soon as possible, I have to generete traffic with different kind of p2p programs and I also ping my router (default gateway) with command ping -t -l 1500 same time.

Why does firefox time out so often? slows down my working

Why does firefox time out so often. I can be in the middle of something and it just stops. did it as I am trying to write this note. very frustrating! It either times out or freezes. the former happens more often. I can be on the web or on yahoo mail.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
See also:
* http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
* Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

If createConnection hit "connection lost contact" then "invalid OCI handle"

I am facing a peculiar error with OCCI API :
The c++ application make use of OCCI API to interact with 10 different oracle DBs sequentially in loop, but the moment
pConn = pEnv->createConnection(a_usr, a_pass, a_connection) for 1 slow db is hit with "ORA-03135: connection lost contact" then
for all the remaining other db execution I get a constant error - "ORA-32102: invalid OCI handle" i.e
when the control moves to next db then "pConn = pEnv->createConnection" is successful for all the rest db but when
pRes = pStmt->executeQuery() is executed I get this - "ORA-32102: invalid OCI handle" standard error.
The rest of dbs are live, cross checked with SQLPLUS.
The OCCI resources and handlers are initialized in class and remains in memory till the end of the application. In healthy situation the application works fine for all10 dbs and handles all the ORA errors well except for this situation.
Question: When OCCI hit ORA-03135 error in createConnection method , does OCCI releases the memory (or handlers) ..? If yes then with the same "env" handler why OCCI succeeds in making the next connection and we have correct "con" handler, similarly "createStatement" is also successful but this same "statement" handler the executeQuery() fails with -invalid OCI handle ??
In healthy situation all logic works just fine, I am able to get the data that means sql queries and resultset handle code is perfect.
Thanks in advance,
Vijay

If you haven't found a solution for this yet, could you post the entire section of code? Please use the code tag to post the code.

Restore 11g controlfile - ORA-03135: connection lost contact

Hi
I am restoring 11g RAC db to single instance on a different server.
Here is what I get:
rman target / catalog rman/rman@rcat
Recovery Manager: Release 11.1.0.7.0 - Production on Wed Oct 29 18:05:50 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database (not started)
connected to recovery catalog database
RMAN> set dbid=3467834289
executing command: SET DBID
database name is "HFMPRD" and DBID is 3467834289
RMAN> startup nomount
Oracle instance started
Total System Global Area 4275781632 bytes
Fixed Size 2166536 bytes
Variable Size 3187671288 bytes
Database Buffers 1073741824 bytes
Redo Buffers 12201984 bytes
RMAN> restore controlfile from '/u03/oracle/backup/hfmprd/control/c-3467834289-20081026-01';
Starting restore at 29-OCT-08
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10041: Could not re-create polling channel context following failure.
RMAN-10024: error setting up for rpc polling
RMAN-10005: error opening cursor
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-03002: failure of restore command at 10/29/2008 18:06:25
ORA-03135: connection lost contact
Process ID: 18060
Session ID: 555 Serial number: 5
[oracle@zacdgisrac03 ~]$
Why would I be losing connection? The restore worked with a 10G restore I did with the same catalog on the same server.
Regards

Are the Oracle versions for both the source database home and the target database home the same (INCLUDING patchlevel)? Obviously you are trying to restore to an already patched ORACLE_HOME. ORA-03135 is only the consequence, but problem reasons are RMAN-10041 and RMAN-10024.
Werner

Help - ORA-03135: connection lost contact

I was running the scripts for loading the data into my database through the sql*plus. The client (sql*plus) is on the same machine where the database is installed. So there is no network in the picture. After running the script for more than 6 hours, I got with the following error..
ERROR at line 2:
ORA-03135: connection lost contact
I did the primary checks but could not find out why it happend. Can anybody help to find the root of the problem?

These are general user data populating scripts which fills data into application tables through the backend for the purpose of load testing (how much data the application is comfortable with).
There are many scripts run in sequence. One script correspond to one table. It generates the data through CTAS (Create Table As Select) statement. And then creates primary key, indexes, foreing keys, and other constraits.
Just for your information, I am pasting the error log...
31__sffnd_htref_step_text_ctas...
11-JUN-06 06.14.26.265000 PM +05:30
Elapsed: 00:00:00.00
Table created.
Elapsed: 00:23:49.20
24937444 rows created.
Elapsed: 00:17:58.90
Table altered.
Elapsed: 00:26:14.68
Index created.
Elapsed: 00:22:06.79
Index created.
Elapsed: 00:13:59.90
Index created.
Elapsed: 00:42:18.39
Index created.
Elapsed: 00:33:40.56
(PLAN_ID ASC,OPER_KEY ASC,STEP_KEY ASC,STEP_UPDT_NO ASC,TEXT_TYPE ASC)
ERROR at line 2:
ORA-03135: connection lost contact
Shirish.

Oracle XML vaidation causes database connection lost.

Schema document:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
     <xsd:annotation>
          <xsd:documentation xml:lang="en">
          </xsd:documentation>
     </xsd:annotation>
     <xsd:element name="BDDString" type="xsd:string"/>
</xsd:schema>
XML document:
<?xml version="1.0" encoding="UTF-8"?>
<BDDString><Path>USA</Path></BDDString>
Result http://apps.gotdotnet.com/xmltools/xsdvalidator/Default.aspx validation:
Validation error:
<?xml version="1.0" encoding="UTF-8"?>
<BDDString
Error at (2,14): The element 'BDDString' has invalid child element 'Path'. An error occurred at , (2, 14).
Error at (2,14): The 'Path' element is not declared. An error occurred at , (2, 14).
<Path>USA</Path></BDDString>ORACLE validation:
Declare
     xmlObj XMLType;
begin
     xmlObj := XMLType('<?xml version="1.0" encoding="UTF-8"?><BDDString><Path>USA</Path></BDDString>',
     'cb78db306e061027a7c4b02b1a84d6fb');
     XMLType.schemavalidate(xmlObj);
end;
Result: Oracle XML vaidation causes database connection lost!
*** SCRIPT START : Session:M1GLOBAL_DEV15@MATRIX(5) 3-мар-2005 14:05:41 ***
Start SQL Editor Execution ...
Processing ...
xmlObj := XMLType('<?xml version="1.0" encoding="UTF-8"?>
ORA-03113: end-of-file on communication channel
*** SCRIPT END : Session:M1GLOBAL_DEV15@MATRIX(5) 3-мар-2005 14:08:02 ***
End SQL Editor Execution
Task "SQL Editor Execution": Operation aborted
SQL Editor Execution terminated with errors
Task "SQL Editor Execution" in DoTerminate(): Session Manager: No connection to M1GLOBAL_DEV15@MATRIX
Help!
Question:
     1)Why Oracle validation incorrectly works?
     2)How it to correct?

Hi,
1- what is the Reports version being used?
2- What is the error you are getting?
3- Have you tried to enable reports trace and see what is happening in trace file?
Thanks, Roberto

Why is my connection lost so often? WRV210 Router

Similar Messages

Maybe you are looking for