Why isn't dhcp set as default in rc.conf during installation?

Seems to me that it should be. Thoughts?

As far as I'm concerned:
I don't know if this is the issue that the OP is referring to, but something like this happened to me during a few installs (non-FTP): the default rc.conf had some completely arbitrary static IP address defined and enabled by default. I always thought that the 'dhcp' option (and perhaps a static IP example commented out for reference) would have been a better default setting -- just a simple way to make many if not most network setups work out of the box. The arbitrary static IP configuration is unlikely to work on too many systems, so I could never quite figure out what it was doing there enabled by default.
It's mostly an aesthetic preference. Like I said -- it's not a huge issue, I usually just change the whole thing when I edit rc.conf during installation.

Similar Messages

Why can't I set a default calendar on my iPad?

On my iPhone, I can set a default calendar under the "Mail..." utility option, but this is NOT an option on my iPad. Is this just an oversight on Apple's part or am I overlooking the setting elsewhere on my iPad?

I see the setting in Settings/Mail, Contacts, Calendars/Calendars, at the bottom of the page.

Air for iOS, why isn't the setting for device being remembered?

in flash CC with air3.7 and air3.8, everytime i open the general tab in the air for ios settings, the device is marked as iphone and ipad. i change it to iphone only, close the settings, save the file. when i open the settings again, i have to click on the general tab and the device is set back to iphone and ipad.
i consider this a bug. this has never happened in any other version of air. i had to reject an apple binary when i noticed it was set to be a universal app, which it isn't, and had i not caught the error, i would've been waiting only to be rejected by apple...
how can this be fixed? thanks

iOS 7 apparently requires at least 512MB of RAM. The fourth generation iPod touch only has 256MB, and therefore won't get it.
(89510)

Why does Creative Suite 6 Design & Web Premium hang up during installation?

I just purchased Adobe Creative Suite 6 Design & Web Premium and it is hung up during installation. It gets to 8% complete during installing Microsoft Visual C++ 2008 Redistributable Package and just quits working. What is wrong?

The problem was that my anti-virus software was preventing proper installation.
Simple fix but at 3 AM not so simple to deduce.
Thank you for your reply.

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

With recent update of Firefox, I can no longer set the default page, it always reverts back to the Mozilla page, why?

Why can I no longer set the default page to something else? Every time I open Mozilla Firefox, it always reverts back to the Mozilla page. No matter how many times I do this, it always reverts.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

After installing Reader XI, why can't Acrobat be set as default PDF handler?

I've tried everything I know, including a clean boot. Every time I try to set Win7 to open PDFs with Acrobat (Version 8.3.1), it sets it back to Reader XI.
From inside Reader/Preferences/General/Select Default PDF Handler, Reader XI is the only option. Acrobat isn't listed.

Unfortunately there is no option post installation with Acrobat 8 to change PDF ownership. However this is possbile Acrobat 10 onwards. But yYou can choose to make Reader XI the default PDF handler during installation itself.
1. Go to Control Panel -> Add/Remove Programs, select the entry "Adobe Reader XI" and Un-install.
2. Then visit link : http://get.adobe.com/reader/enterprise/ and choose the Reader which you need.
3. When you double click the EXE, then a screen will come showing extraction of files. As soon as extraction ends, installation will begin and you will be presented with following screen :
4. Uncheck the checkbox which says "Make Adobe Reader my default PDF viewer"
Acrobat 8 will remain default PDF viewer on your machine.

Outlook 2013 set as default mail client but still shows error box saying it isn't?

We have recently installed Office 2013 64-bit on 4 servers. We previously used Outlook 2007 64-bit.
We set Outlook 2013 as the default mail client and do not have another mail client installed on the servers. However when you first login you get an error message box that says you have no default mail client 'either there is no default mail client or the
current mail client cannot fulfill the messaging request'.
I have checked all defaults to be for Outlook 2013.
How can I solve this issue? I am an administrator.

Try different Method to set Outlook 2013 as the default mail client to check the result. Thanks.
Method 1:Set as default within outlook.
-File > Options > General Tab > select the "Make Outlook the default program for E-mail, Contacts, and Calendar"
check box.
Method 2: Set as default from the internet explorer.
-Tool > Internet Options > Programs Tab > Set programs
Method 3: Set as default from control panel.
1.Navigate to Control Panel\Default Programs\Set Default Programs
2.Click on the outlook icon on the left hand side.
3.Set as default.
We may also try to create anther windows user profile in the same machine to check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support

Feedback: Why isn't Print to PDF a default option in Windows 8.1 RT on Surface 2?

Why isn't PRINT TO PDF a stock feature of Windows 8.1 RT and IE 11?
One of the biggest reasons why people prefer chrome over IE is the built-in print to PDF.
while you can easily get around this on full 8.1, on Windows RT, print and apps are very limited - so we depend entirely on what Microsoft puts in the OS.
Please Microsoft, allow print to PDF as a built-in feature of IE 11 and Windows 8.1 RT.
See here for more info:
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindowsrt8_1/how-to-print-to-pdf-from-ie-metro-modern/197c4a04-19a5-46ee-8aa6-d347e0377c14

Hi,
Thanks for your good feedback on IE. I will help to record this feedback in Microsoft product platform.
Kate Li
TechNet Community Support

I'm trying to change the default line spacing on Word to 1.5, but the "set as default" button isn't there. How to I make it appear?

I use Word 2011 and I am trying to change my line spacing default to 1.5. However, the button that usually says "set as default" is not an option. So, I am ofrced to change the line spacing every time I write a new document. How do I make 1.5 spacing a default setting? Thanks!

It sounds like you're asking for advice on using Microsoft Word. Apple's site is for technical questions about Apple-branded hardware & software. The best place to ask questions about Microsoft Office is Microsoft's own forums. (This link was good the last time I checked.)

Drop Down List - Setting the Default Selected Item

I have a drop down list in my application that gets populated by a remote database. When you select an item from the list, a screen full of thumbnails is populated based on the selection. We have decided that when the user gets to this component in our air application, that it looks too empty and barren. All that displays is a drop down list with an empty screen. So we would like to set a default setting for the drop down list so that when the user gets to this component, a screen full of thumbnails is awaiting them and they can change it if they want. My first instinct was just to set the selectedIndex property of the drop down list to the value that we want as the default, and that works, but it only changes the label in the dropdownlist, it doesn't actually populate the screen with the thumbnails. That is because when an item is selected, it has to be commited to the drop down list by a CLOSE event that then sets off the close handler that populates the screen with thumbnails. So after looking at the documentation, I found that there is a method called closeDropDown that states the following:
closeDropDown
method
public function closeDropDown(commit:Boolean):void
Close the drop-down list and dispatch a DropDownEvent.CLOSE event.
Parameters
commit:Boolean — If true, commit the selected data item.
When I use this method, nothing happens. In fact if I add a listener for the CLOSE event, the close event isn't getting fired. So I am a little befuddled. The only thing that I can figure is that I am setting the selectedIndex and not the selectedItem before I call the closeDropDown method, and if you look above, the documentation vaguely states that that "If true, commit the selected data item". Do I need to set the selectedItem and not the selectedIndex? If so, I am not exactly sure how to do this since I am using a service to populate my drop down list which kind of makes the dataprovider a little unclear to me in the code because it gets replaced by an AsyncListView. Here is what I have.
<fx:Script>
     <![CDATA[
        protected function dropDownList_creationCompleteHandler(event:FlexEvent):void{
          getAllAudio_descriptionsResult.token = audiodescriptionsService.getAllAudio_descriptions();
          getAllAudioResult.token = audioService.getAllAudio();
     private function audioDescriptionsCallResponderHandler(event:ResultEvent):void {
          audioDesc = event.result as ArrayCollection;
     private function audioCallResponderHandler(event:ResultEvent):void {
          audio = event.result as ArrayCollection;
          audioDescDropDown.selectedIndex = 2;
          audioDescDropDown.closeDropDown(true);
     ]]>
</fx:Script>
<fx:Declarations>
     <s:CallResponder id="getAllAudio_descriptionsResult" result="audioDescriptionsCallResponderHandler(event)"/>
     <audiodescriptionsservice:AudiodescriptionsService id="audiodescriptionsService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
     <s:CallResponder id="getAllAudioResult" result="audioCallResponderHandler(event)"/>
     <audioservice:AudioService id="audioService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
</fx:Declarations>
<s:DropDownList id="audioDescDropDown" x="43" y="65" width="185" height="34" fontFamily="MyriadProSemiBold"
                    fontSize="15" skinClass="skins.VideoSkins.Video.DropDownSkin"
                    color="0xE6E6E6" selectionColor="0x054F7C" rollOverColor="0x007CBA"
                    creationComplete="dropDownList_creationCompleteHandler(event)" labelField="audioCatName"
                    itemRenderer="renderers.DropDownList3" close="DDLAudioCloseHandler(event)">
     <s:AsyncListView list="{getAllAudio_descriptionsResult.lastResult}"/>
</s:DropDownList>
I would really appreciated hearing from anyone who has experience or insight into setting a default for a drop down list and actually forcing it to execute that default selection. Any thoughts at all would be helpful. Thanks!

I don't see your close handler in the code you posted, so if you provided it and I missed seeing it, please forgive me. I'm a bit unclear on why the open and close of your dropdown list is so critical to your functionality. It seems to me that the page of data would be tied to the item selected in the drop down (which to my mind is the only purpose for the drop down to be there). So why do you first need to open and close the drop down, rather than just taking the selected value and doing whatever you'd normally do with it to populate that page?
What I'm getting at is that I'd expect that page to be a separate component that would just have a property for the selected "thing", and that you could populate it either manually, as I suggested, or through the close handler on your drop down--I wouldn't think that there should be a need to go through the close handler every time. Even if you don't have it implemented the way I'm thinking, you may want to think about whether you need to go through the close handler every time, or whether you could break it out so that the close handler simply determines which item to select, then jumps to another function that actually does something with the selected value. That way, you don't have to go through the overhead of opening and closing the drop down if you need to change its value programmatically.
HTH;
Amy

Why isn't there YouTube for iOS 6?

YouTube should be on iOS 6, why isn't it?

Here is the thing the actual license for Apple to have a native YouTube app has expired you must understand this more about Apple removing Google from its ecosystem and less about actual licenses. If Apple was so inclined I am almost certain they could have continued to provide a native YouTube app.
Do you really think that Apple Maps are "better" for iOS users? You know that you can set your default search to another provider such as Bing? Imagine Apple changing its default Safari search to Bing. You must understand that Google makes more from searches on iOS devices than it does on everyting that is Andriod (source:http://www.digitaltrends.com/mobile/google-earns-four-times-more-from-ios-than-a ndroid/). Apple is slowly and meticulously working on freeing iOS of Google products.
Of course it is a free market and Apple will most certainly allow Google's apps on their app store.

After I hit submit, why isn't it compressing?

I'm new to Compressor. I created "settings" and a "destination" for my project, then I hit submit. The file appears in the history window but it seems to be inactive. Why isn't it compressing?

I had the same problem, I'm using compressor without problems for a few years now, I re-installed the full Final Cut Studio set of discs and compressor is working ok again.

How do I set my default Shockwave Flash object viewer to Firefox 4 RC?

In the previous version of Firefox, I set it as my default Shockwave Flash viewer (these were offline objects) by selection the application in my program files.
When I upgraded to FF 4 RC, I was no longer able to view these files, nor was I able to find the application to default to (it was no longer in program files).
I tried setting the default viewer to the FF application located in Local Roaming but it won't appear in either the 'recommended' or 'other' when selected.
I can however still view these SWFs by clicking and dragging them onto the FF window. This isn't a major issue but I'd like to know if and how this can be fixed.
Thanks

# Open Windows Explorer.
# Right-click a Shockwave Flash file (.SWF) and select '''Open with''' then '''Choose default program...'''
# Click the '''Browse''' button in the lower right corner of the window and choose the Firefox executable. If you've installed Firefox in the default location, its path is ''C:\Program Files (x86)\Mozilla Firefox\firefox.exe''

Why isn't my iPad 2 giving me alerts for my all-day events?

Why isn't my iPad 2 giving me alerts for my all-day events? I have alerts set-up for 2 days prior. My alerts work for other calendar entries where they are set-up for 15mins prior.

The laptop has a more powerful wifi radio then the iPad. Try getting closer to the location where iPad can connect.

Why isn't dhcp set as default in rc.conf during installation?

Similar Messages

Maybe you are looking for