Why my calendar display different there is one day difference from different  when I see main screen and open the calendar

See my Why my calendar display different there is one day difference from different  when I see main screen and open the calendar

I too am having the same issue only I am in Regina, Canada.  iCloud appears to think Regina, Canada is in the Central time zone which it is, but it does not use Daylight Savings time.  My PC is Windows 7 and I am using Outlook 2010.  I have iCloud on iPhone 5 and iPad 2.   Terribly frustrating!

Similar Messages

  • TS1398 My iphone5 ios6 goes on 3g although there is a wifi network available! When i go into settings, and select the network, it connects again! Is it software? Or hardware?

    My iphone5 ios6 goes on 3g although there is a wifi network available! When i go into settings, and select the network, it connects again! Is it software? Or hardware?

    this was happening with my phone the other night. i just went into the phone to settings > general > reset > reset all settings
    You can also try rebooting the router

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I a

    I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?

    Hi Paul ,
    It could be a compatibility issue as well as Acrobat 8 is an older version.
    Do you get any error message while registering for the product?
    Try repairing it and once and also check for updates as well.
    Is it happening with all the word files or any specific one'?
    Regards
    Sukrit Dhingra
    Acrobat 8 and Windows 7 Don't Work

  • I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

    I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

    Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

  • Hi There, any one can send me on-line documentation link 11.5 and r12

    Hi There,
    Any one can send me on-line documentation link 11.5 and r12
    Thanks
    Bachan

    Direct links of Oracle Apps Documentation:
    Oracle E-Business Suite Online Documentation Library Release 12
    http://download.oracle.com/docs/cd/B40089_05/current/html/homeset.html
    Oracle Applications Release 11.5.10 + Online Documentation Library
    http://download.oracle.com/docs/cd/B25516_17/current/html/homeset.html
    Oracle Applications Release 11.5.10 Documentation CD
    http://download.oracle.com/docs/cd/B15436_01/current/html/homeset.html
    Archived Documents (11.5.1 to 11.5.9) can be found at:
    http://www.oracle.com/technology/documentation/applications.html

  • Why does my MacBook come up with window saying "setting Up Mac" when I turn it on and enter my password and stays there and does not go any further

    Why does my MacBook come up with window saying "setting Up Mac" when I turn it on and enter my password and stays there and does not go any further

    You may want to put this question on the MacBook community forum to get a better response.
    https://discussions.apple.com/community/notebooks/macbook

  • Flex 3 Dashboard Displays Differently when Compiled Locally

    I am writing an Adobe Flex Developers Center article on converting the Flex Dashboard example application to Flex 4.
    http://examples.adobe.com/flex3/devnet/dashboard/main.html
    The problem is the application renders differently when you right-click that application, download the zip source file, and compile it locally in Flex Builder 3 (see screenshot below).
    Could a few of you please visit the above URL, download the code, import the project, then launch the app and tell me what you see?
    After importing you will need to create an empty libs folder and right click another error message to recreate the html templates.
    Thanks very much!

    I am writing an Adobe Flex Developers Center article on converting the Flex Dashboard example application to Flex 4.
    http://examples.adobe.com/flex3/devnet/dashboard/main.html
    The problem is the application renders differently when you right-click that application, download the zip source file, and compile it locally in Flex Builder 3 (see screenshot below).
    Could a few of you please visit the above URL, download the code, import the project, then launch the app and tell me what you see?
    After importing you will need to create an empty libs folder and right click another error message to recreate the html templates.
    Thanks very much!

  • One hour difference from Nokia and Outlook

    When I synchronise, calendar items appear with different times in Microsoft Outlook and in my Nokia device. I have checked the FAQ and I have done what it says.
    I have changed my Nokia 6110 clock by one hour for summer;
    my PC was automatically also changed by one hour.
    Now when I synchronise to Outlook there is one hour difference on all my appointments.

    That's the point I was trying to make, but since you didn't say what part of Australia you were in, I couldn't give the details. GMT +11 is currently correct for Melbourne, ten hours ahead of the UK, which is GMT +1 until this weekend.
    Chris
    6230i (the last bug-free Nokia?)
    Vodafone UK contract since 1992

  • Main screen and dock move to second display

    Hi all,
    although i found many replies regarding to how to get the dock to the desired screen i face the following problem.
    I am a vj/dj using serato dj, mix emergency and madmapper. Whenever i connect a second display to my macbook (macbook pro early 2013 retina, now on OS 10.9) the main screen and dock is transferred to that second display (e.g. projector). These softwares need to run to the main screen only, and this should be my laptop's screen.
    Even if i get the dock back to my macbook display, these softwares recognise as MAIN display the external one and not my macbook pro's display.
    I am facing this problem since my OS upgrade to 10.9 from 10.8!
    Can i do something to my macbook so as to always recognise its own display as the main display? Does this problem exist on Yosemite as well?
    Can i downgrade to 10.8 if all the rest fail?
    Regards

    Hi konstadinos.k,
    I understand you want your MacBook Pro to be the default display for your DJ software when you have a second display connected to it.  Take a look at the article below that explains all of the options for extending or mirroring your displays. I've highlighted some key information below that may be helpful in your situation.  Even though the article is for Mavericks, the info should still be applicable.
    OS X: Using multiple displays in Mavericks - Apple Support
    http://support.apple.com/en-us/HT202780
    You can also assign an app to a specific display space from the app's menu in the Dock. Windows assigned to a space always open there when the display you specified is connected.
    The blue boxes in Displays preferences represent each display that's connected. The size of each box is relative to the current resolution of each display. In this example, the smaller box on the left is the display of a 13" MacBook Pro while the larger box on the right represents the Apple 27" Thunderbolt Display.
    Drag any of the blue boxes to change the location of a display in relation to your additional screens. You can use this feature to make sure your connected displays match their real world location when navigating windows. The white bar at the top of the blue box represents the menu bar. Drag the white bar onto the blue box representing the display you want as your primary display.
    Hope that helps ...
    - Judy

  • We have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for syc and icloud, the icloud will not accept the 2 accounts?

    we have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for sync and icloud, the icloud will not accept the 2 accounts?

    Do you know what happens if you delete the icloud account from an iphone 4s?  Will it delete the pictures, documents, etc. from the phone, or just unlink the icloud from the phone?  I want to associate a different icloud account to the phone.

  • Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
    It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
    If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
    For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
    In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
    Please check out the following AirPort User Tip for details on optimal base station placement.

  • When I take a photo and try to edit in Photoshop Elements 11 from Lightroom 4, it brings me to PSE 11 and opens the photo in there, but doesn't allow me to do anything - no layers, masks...anything.

    I work on a PC - Windows Vista, and currently use Lightroom 4. When I try to choose the 'edit in' option and go to PSE11, it will go there and open the file, but it won't let me do anything with it.  All the buttons/masks...etc are faded out and when I scroll over them a circle with a line through it comes up. Is there any way to fix this so that when I edit-in from Lightroom to PSE11 that I can actually use it? And if not, how should I save my files then so I can re-open them in PSE11? Would they need to be JPEGs, or something else? I shoot in RAW.
    Thanks in advance!

    Hillsitter,
    I use a Windows PC and PSE Version 8.
    However, I set up the link to PSE by going to Edit > Preferences and
    clicking on the External Editing Tab.
    I then clicked on the 'Choose' box and browsed to > Program Files > Adobe >
    Photoshop Elements 8.0 and I then clicked on the Elements Organiser 8.0.exe
    file to create the Link to the Elements Organiser. I could have linked to
    the PhotoshopElementsEditor.exe file.
    I know this will be somewhat different on a Mac but the principle should be
    the same i.e. link directly to the .exe file.
    I hope this helps.
    Frank Clark

  • Getting one day difference in add_months function

    when i am using the add_months for a
    particular days i am getting one day
    difference
    ex : select add_months(to_date('30-aug-2000',
    'DD-mon-YYYY'),27) from dual;
    result : 30-nov-2002
    select add_months(to_date('30-nov-2000','DD-mon-YYYY'),-27) from dual;
    result : 31-aug-2000.
    differnce between : 31-aug-2000 and 30-aug-2000
    is comming

    When you are passing the last day in the month to the add_month function ( 30-NOV-2002) it will always return the last day in the resulting month ( 31-AUG-2000).
    This is a known Oracle bug and you'll need to create your own logic for adding month to avoid this problem. You can use last_day function in there.

  • When I watch slide show through my Apple TV version 6..2 the air play instruction box appears always on the screen and hides the photo. Is there any way to stop it.

    When I watch slide show through my Apple TV version 6..2 the air play instruction box appears always on the screen and hides the photo. Is there any way to stop it.

    Hi Sujatha vijay,
    It sounds as if your Apple TV is in Conference Room Display mode. You will need to turn this off. See this article -
    Apple TV (2nd and 3rd generation): Understanding AirPlay settings
    http://support.apple.com/kb/HT5517
    Thanks for using Apple Support Communities.
    Best,
    Brett L

Maybe you are looking for